Commit | Line | Data |
---|---|---|
b3874069 | 1 | What: /sys/bus/iio/devices/iio:deviceX |
e34d2c5f JC |
2 | KernelVersion: 2.6.35 |
3 | Contact: linux-iio@vger.kernel.org | |
4 | Description: | |
de1874b7 | 5 | Hardware chip or device accessed by one communication port. |
f386caa3 JC |
6 | Corresponds to a grouping of sensor channels. X is the IIO |
7 | index of the device. | |
e34d2c5f | 8 | |
f386caa3 | 9 | What: /sys/bus/iio/devices/triggerX |
e34d2c5f JC |
10 | KernelVersion: 2.6.35 |
11 | Contact: linux-iio@vger.kernel.org | |
12 | Description: | |
13 | An event driven driver of data capture to an in kernel buffer. | |
14 | May be provided by a device driver that also has an IIO device | |
15 | based on hardware generated events (e.g. data ready) or | |
16 | provided by a separate driver for other hardware (e.g. | |
f386caa3 | 17 | periodic timer, GPIO or high resolution timer). |
e34d2c5f JC |
18 | Contains trigger type specific elements. These do not |
19 | generalize well and hence are not documented in this file. | |
f386caa3 | 20 | X is the IIO index of the trigger. |
e34d2c5f | 21 | |
b3874069 | 22 | What: /sys/bus/iio/devices/iio:deviceX/buffer |
e34d2c5f JC |
23 | KernelVersion: 2.6.35 |
24 | Contact: linux-iio@vger.kernel.org | |
25 | Description: | |
b3874069 | 26 | Directory of attributes relating to the buffer for the device. |
e34d2c5f | 27 | |
b3874069 | 28 | What: /sys/bus/iio/devices/iio:deviceX/name |
e34d2c5f JC |
29 | KernelVersion: 2.6.35 |
30 | Contact: linux-iio@vger.kernel.org | |
31 | Description: | |
f386caa3 JC |
32 | Description of the physical chip / device for device X. |
33 | Typically a part number. | |
e34d2c5f | 34 | |
b3874069 | 35 | What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency |
15739cd2 JC |
36 | What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency |
37 | What: /sys/bus/iio/devices/triggerX/sampling_frequency | |
e34d2c5f JC |
38 | KernelVersion: 2.6.35 |
39 | Contact: linux-iio@vger.kernel.org | |
40 | Description: | |
41 | Some devices have internal clocks. This parameter sets the | |
42 | resulting sampling frequency. In many devices this | |
43 | parameter has an effect on input filters etc rather than | |
44 | simply controlling when the input is sampled. As this | |
45 | effects datardy triggers, hardware buffers and the sysfs | |
46 | direct access interfaces, it may be found in any of the | |
47 | relevant directories. If it effects all of the above | |
15739cd2 | 48 | then it is to be found in the base device directory. |
e34d2c5f | 49 | |
b3874069 | 50 | What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available |
15739cd2 JC |
51 | What: /sys/.../iio:deviceX/buffer/sampling_frequency_available |
52 | What: /sys/bus/iio/devices/triggerX/sampling_frequency_available | |
e34d2c5f JC |
53 | KernelVersion: 2.6.35 |
54 | Contact: linux-iio@vger.kernel.org | |
55 | Description: | |
56 | When the internal sampling clock can only take a small | |
f386caa3 | 57 | discrete set of values, this file lists those available. |
e34d2c5f | 58 | |
b3874069 | 59 | What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio |
b9618c0c MH |
60 | KernelVersion: 2.6.38 |
61 | Contact: linux-iio@vger.kernel.org | |
62 | Description: | |
63 | Hardware dependent ADC oversampling. Controls the sampling ratio | |
64 | of the digital filter if available. | |
65 | ||
b3874069 | 66 | What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available |
b9618c0c MH |
67 | KernelVersion: 2.6.38 |
68 | Contact: linux-iio@vger.kernel.org | |
69 | Description: | |
70 | Hardware dependent values supported by the oversampling filter. | |
71 | ||
a37b549e JC |
72 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw |
73 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw | |
e34d2c5f JC |
74 | KernelVersion: 2.6.35 |
75 | Contact: linux-iio@vger.kernel.org | |
76 | Description: | |
77 | Raw (unscaled no bias removal etc) voltage measurement from | |
f386caa3 JC |
78 | channel Y. In special cases where the channel does not |
79 | correspond to externally available input one of the named | |
80 | versions may be used. The number must always be specified and | |
15739cd2 JC |
81 | unique to allow association with event codes. Units after |
82 | application of scale and offset are microvolts. | |
f386caa3 | 83 | |
a37b549e | 84 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw |
e34d2c5f JC |
85 | KernelVersion: 2.6.35 |
86 | Contact: linux-iio@vger.kernel.org | |
87 | Description: | |
f386caa3 JC |
88 | Raw (unscaled) differential voltage measurement equivalent to |
89 | channel Y - channel Z where these channel numbers apply to the | |
90 | physically equivalent inputs when non differential readings are | |
91 | separately available. In differential only parts, then all that | |
15739cd2 JC |
92 | is required is a consistent labeling. Units after application |
93 | of scale and offset are microvolts. | |
e34d2c5f | 94 | |
0baf29d6 JC |
95 | What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw |
96 | KernelVersion: 3.2 | |
97 | Contact: linux-iio@vger.kernel.org | |
98 | Description: | |
99 | Raw capacitance measurement from channel Y. Units after | |
100 | application of scale and offset are nanofarads. | |
101 | ||
102 | What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw | |
103 | KernelVersion: 3.2 | |
104 | Contact: linux-iio@vger.kernel.org | |
105 | Description: | |
106 | Raw differential capacitance measurement equivalent to | |
107 | channel Y - channel Z where these channel numbers apply to the | |
108 | physically equivalent inputs when non differential readings are | |
109 | separately available. In differential only parts, then all that | |
110 | is required is a consistent labeling. Units after application | |
68284a12 | 111 | of scale and offset are nanofarads. |
0baf29d6 | 112 | |
a37b549e | 113 | What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw |
15739cd2 | 114 | What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw |
a37b549e JC |
115 | What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw |
116 | What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw | |
117 | What: /sys/bus/iio/devices/iio:deviceX/in_temp_z_raw | |
e34d2c5f JC |
118 | KernelVersion: 2.6.35 |
119 | Contact: linux-iio@vger.kernel.org | |
120 | Description: | |
f386caa3 | 121 | Raw (unscaled no bias removal etc) temperature measurement. |
68284a12 | 122 | If an axis is specified it generally means that the temperature |
f386caa3 | 123 | sensor is associated with one part of a compound device (e.g. |
15739cd2 JC |
124 | a gyroscope axis). Units after application of scale and offset |
125 | are milli degrees Celsuis. | |
e34d2c5f | 126 | |
a37b549e | 127 | What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input |
7c31b984 MH |
128 | KernelVersion: 2.6.38 |
129 | Contact: linux-iio@vger.kernel.org | |
130 | Description: | |
131 | Scaled temperature measurement in milli degrees Celsius. | |
132 | ||
a37b549e JC |
133 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw |
134 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw | |
135 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw | |
e34d2c5f JC |
136 | KernelVersion: 2.6.35 |
137 | Contact: linux-iio@vger.kernel.org | |
138 | Description: | |
f386caa3 | 139 | Acceleration in direction x, y or z (may be arbitrarily assigned |
15739cd2 JC |
140 | but should match other such assignments on device). |
141 | Has all of the equivalent parameters as per voltageY. Units | |
142 | after application of scale and offset are m/s^2. | |
e34d2c5f | 143 | |
d4c926f2 JC |
144 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw |
145 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw | |
146 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw | |
e34d2c5f JC |
147 | KernelVersion: 2.6.35 |
148 | Contact: linux-iio@vger.kernel.org | |
149 | Description: | |
f386caa3 JC |
150 | Angular velocity about axis x, y or z (may be arbitrarily |
151 | assigned) Data converted by application of offset then scale to | |
152 | radians per second. Has all the equivalent parameters as | |
15739cd2 JC |
153 | per voltageY. Units after application of scale and offset are |
154 | radians per second. | |
e34d2c5f | 155 | |
a37b549e JC |
156 | What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw |
157 | What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw | |
158 | What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw | |
e34d2c5f JC |
159 | KernelVersion: 2.6.35 |
160 | Contact: linux-iio@vger.kernel.org | |
161 | Description: | |
f386caa3 JC |
162 | Inclination raw reading about axis x, y or z (may be |
163 | arbitrarily assigned). Data converted by application of offset | |
164 | and scale to Degrees. | |
e34d2c5f | 165 | |
a37b549e JC |
166 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw |
167 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw | |
168 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw | |
e34d2c5f JC |
169 | KernelVersion: 2.6.35 |
170 | Contact: linux-iio@vger.kernel.org | |
171 | Description: | |
f386caa3 | 172 | Magnetic field along axis x, y or z (may be arbitrarily |
15739cd2 JC |
173 | assigned). Data converted by application of offset |
174 | then scale to Gauss. | |
e34d2c5f | 175 | |
a37b549e JC |
176 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw |
177 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw | |
178 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw | |
f386caa3 | 179 | KernelVersion: 2.6.36 |
e34d2c5f JC |
180 | Contact: linux-iio@vger.kernel.org |
181 | Description: | |
15739cd2 JC |
182 | Highest value since some reset condition. These |
183 | attributes allow access to this and are otherwise | |
184 | the direct equivalent of the <type>Y[_name]_raw attributes. | |
e34d2c5f | 185 | |
a37b549e | 186 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw |
f386caa3 | 187 | KernelVersion: 2.6.36 |
e34d2c5f JC |
188 | Contact: linux-iio@vger.kernel.org |
189 | Description: | |
f386caa3 JC |
190 | A computed peak value based on the sum squared magnitude of |
191 | the underlying value in the specified directions. | |
e34d2c5f | 192 | |
a37b549e | 193 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset |
15739cd2 JC |
194 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset |
195 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset | |
196 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset | |
197 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset | |
198 | What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset | |
199 | What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset | |
a37b549e | 200 | What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset |
e34d2c5f JC |
201 | KernelVersion: 2.6.35 |
202 | Contact: linux-iio@vger.kernel.org | |
203 | Description: | |
f386caa3 JC |
204 | If known for a device, offset to be added to <type>[Y]_raw prior |
205 | to scaling by <type>[Y]_scale in order to obtain value in the | |
206 | <type> units as specified in <type>[y]_raw documentation. | |
15739cd2 JC |
207 | Not present if the offset is always 0 or unknown. If Y or |
208 | axis <x|y|z> is not present, then the offset applies to all | |
209 | in channels of <type>. | |
f386caa3 JC |
210 | May be writable if a variable offset can be applied on the |
211 | device. Note that this is different to calibbias which | |
212 | is for devices (or drivers) that apply offsets to compensate | |
213 | for variation between different instances of the part, typically | |
214 | adjusted by using some hardware supported calibration procedure. | |
15739cd2 JC |
215 | Calibbias is applied internally, offset is applied in userspace |
216 | to the _raw output. | |
f386caa3 | 217 | |
a37b549e JC |
218 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale |
219 | What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale | |
220 | What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale | |
221 | What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale | |
d802bf6f | 222 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale |
a37b549e JC |
223 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale |
224 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale | |
d4c926f2 | 225 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale |
a37b549e JC |
226 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale |
227 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale | |
228 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale | |
229 | What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale | |
e5107fb8 JC |
230 | KernelVersion: 2.6.35 |
231 | Contact: linux-iio@vger.kernel.org | |
232 | Description: | |
f386caa3 JC |
233 | If known for a device, scale to be applied to <type>Y[_name]_raw |
234 | post addition of <type>[Y][_name]_offset in order to obtain the | |
235 | measured value in <type> units as specified in | |
68284a12 | 236 | <type>[Y][_name]_raw documentation. If shared across all in |
15739cd2 JC |
237 | channels then Y and <x|y|z> are not present and the value is |
238 | called <type>[Y][_name]_scale. The peak modifier means this | |
239 | value is applied to <type>Y[_name]_peak_raw values. | |
f386caa3 | 240 | |
a37b549e JC |
241 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias |
242 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias | |
243 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias | |
d4c926f2 JC |
244 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias |
245 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias | |
246 | What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias | |
3c97c08b JB |
247 | What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias |
248 | What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias | |
e34d2c5f JC |
249 | KernelVersion: 2.6.35 |
250 | Contact: linux-iio@vger.kernel.org | |
251 | Description: | |
f386caa3 | 252 | Hardware applied calibration offset. (assumed to fix production |
15739cd2 | 253 | inaccuracies). |
f386caa3 | 254 | |
a37b549e JC |
255 | What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale |
256 | What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale | |
257 | What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale | |
258 | What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale | |
259 | What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale | |
260 | What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale | |
d4c926f2 JC |
261 | What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale |
262 | What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale | |
263 | What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale | |
3c97c08b JB |
264 | what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale |
265 | what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale | |
e34d2c5f JC |
266 | KernelVersion: 2.6.35 |
267 | Contact: linux-iio@vger.kernel.org | |
268 | Description: | |
f386caa3 JC |
269 | Hardware applied calibration scale factor. (assumed to fix |
270 | production inaccuracies). If shared across all channels, | |
271 | <type>_calibscale is used. | |
e34d2c5f | 272 | |
a37b549e | 273 | What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available |
15739cd2 JC |
274 | What: /sys/.../iio:deviceX/in_voltageX_scale_available |
275 | What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available | |
276 | What: /sys/.../iio:deviceX/out_voltageX_scale_available | |
d802bf6f | 277 | What: /sys/.../iio:deviceX/out_altvoltageX_scale_available |
0baf29d6 | 278 | What: /sys/.../iio:deviceX/in_capacitance_scale_available |
f386caa3 | 279 | KernelVersion: 2.635 |
e34d2c5f JC |
280 | Contact: linux-iio@vger.kernel.org |
281 | Description: | |
f386caa3 JC |
282 | If a discrete set of scale values are available, they |
283 | are listed in this attribute. | |
e34d2c5f | 284 | |
b65d6212 MH |
285 | What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain |
286 | KernelVersion: 2.6.35 | |
287 | Contact: linux-iio@vger.kernel.org | |
288 | Description: | |
289 | Hardware applied gain factor. If shared across all channels, | |
290 | <type>_hardwaregain is used. | |
291 | ||
0c22db43 JC |
292 | What: /sys/.../in_accel_filter_low_pass_3db_frequency |
293 | What: /sys/.../in_magn_filter_low_pass_3db_frequency | |
294 | What: /sys/.../in_anglvel_filter_low_pass_3db_frequency | |
295 | KernelVersion: 3.2 | |
296 | Contact: linux-iio@vger.kernel.org | |
297 | Description: | |
298 | If a known or controllable low pass filter is applied | |
299 | to the underlying data channel, then this parameter | |
300 | gives the 3dB frequency of the filter in Hz. | |
301 | ||
15739cd2 | 302 | What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw |
d802bf6f | 303 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw |
98069c3f RS |
304 | KernelVersion: 2.6.37 |
305 | Contact: linux-iio@vger.kernel.org | |
306 | Description: | |
307 | Raw (unscaled, no bias etc.) output voltage for | |
308 | channel Y. The number must always be specified and | |
309 | unique if the output corresponds to a single channel. | |
d802bf6f MH |
310 | While DAC like devices typically use out_voltage, |
311 | a continuous frequency generating device, such as | |
312 | a DDS or PLL should use out_altvoltage. | |
98069c3f | 313 | |
a37b549e | 314 | What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw |
d802bf6f | 315 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw |
98069c3f RS |
316 | KernelVersion: 2.6.37 |
317 | Contact: linux-iio@vger.kernel.org | |
318 | Description: | |
319 | Raw (unscaled, no bias etc.) output voltage for an aggregate of | |
320 | channel Y, channel Z, etc. This interface is available in cases | |
321 | where a single output sets the value for multiple channels | |
322 | simultaneously. | |
323 | ||
a37b549e JC |
324 | What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode |
325 | What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode | |
d802bf6f MH |
326 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode |
327 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode | |
14f88f1b MH |
328 | KernelVersion: 2.6.38 |
329 | Contact: linux-iio@vger.kernel.org | |
330 | Description: | |
331 | Specifies the output powerdown mode. | |
332 | DAC output stage is disconnected from the amplifier and | |
333 | 1kohm_to_gnd: connected to ground via an 1kOhm resistor | |
334 | 100kohm_to_gnd: connected to ground via an 100kOhm resistor | |
335 | three_state: left floating | |
336 | For a list of available output power down options read | |
337 | outX_powerdown_mode_available. If Y is not present the | |
338 | mode is shared across all outputs. | |
339 | ||
a37b549e JC |
340 | What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available |
341 | What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available | |
d802bf6f MH |
342 | What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available |
343 | What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available | |
14f88f1b MH |
344 | KernelVersion: 2.6.38 |
345 | Contact: linux-iio@vger.kernel.org | |
346 | Description: | |
347 | Lists all available output power down modes. | |
348 | If Y is not present the mode is shared across all outputs. | |
349 | ||
a37b549e JC |
350 | What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown |
351 | What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown | |
d802bf6f MH |
352 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown |
353 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown | |
14f88f1b MH |
354 | KernelVersion: 2.6.38 |
355 | Contact: linux-iio@vger.kernel.org | |
356 | Description: | |
357 | Writing 1 causes output Y to enter the power down mode specified | |
358 | by the corresponding outY_powerdown_mode. Clearing returns to | |
359 | normal operation. Y may be suppressed if all outputs are | |
360 | controlled together. | |
361 | ||
d802bf6f MH |
362 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency |
363 | KernelVersion: 3.4.0 | |
364 | Contact: linux-iio@vger.kernel.org | |
365 | Description: | |
366 | Output frequency for channel Y in Hz. The number must always be | |
367 | specified and unique if the output corresponds to a single | |
368 | channel. | |
369 | ||
370 | What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase | |
371 | KernelVersion: 3.4.0 | |
372 | Contact: linux-iio@vger.kernel.org | |
373 | Description: | |
374 | Phase in radians of one frequency/clock output Y | |
375 | (out_altvoltageY) relative to another frequency/clock output | |
376 | (out_altvoltageZ) of the device X. The number must always be | |
377 | specified and unique if the output corresponds to a single | |
378 | channel. | |
379 | ||
b3874069 | 380 | What: /sys/bus/iio/devices/iio:deviceX/events |
f386caa3 JC |
381 | KernelVersion: 2.6.35 |
382 | Contact: linux-iio@vger.kernel.org | |
383 | Description: | |
384 | Configuration of which hardware generated events are passed up | |
385 | to user-space. | |
e34d2c5f | 386 | |
a37b549e JC |
387 | What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en |
388 | What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en | |
389 | What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en | |
390 | What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en | |
391 | What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en | |
392 | What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en | |
d4c926f2 JC |
393 | What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en |
394 | What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en | |
395 | What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en | |
396 | What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en | |
397 | What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en | |
398 | What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en | |
a37b549e JC |
399 | What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en |
400 | What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en | |
401 | What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en | |
402 | What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en | |
403 | What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en | |
404 | What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en | |
15739cd2 JC |
405 | What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en |
406 | What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en | |
407 | What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en | |
408 | What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en | |
409 | What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en | |
410 | What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en | |
2f3cc667 JC |
411 | KernelVersion: 2.6.37 |
412 | Contact: linux-iio@vger.kernel.org | |
413 | Description: | |
f386caa3 | 414 | Event generated when channel passes a threshold in the specified |
2f3cc667 JC |
415 | (_rising|_falling) direction. If the direction is not specified, |
416 | then either the device will report an event which ever direction | |
15739cd2 JC |
417 | a single threshold value is passed in (e.g. |
418 | <type>[Y][_name]_<raw|input>_thresh_value) or | |
419 | <type>[Y][_name]_<raw|input>_thresh_rising_value and | |
420 | <type>[Y][_name]_<raw|input>_thresh_falling_value may take | |
f386caa3 JC |
421 | different values, but the device can only enable both thresholds |
422 | or neither. | |
2f3cc667 JC |
423 | Note the driver will assume the last p events requested are |
424 | to be enabled where p is however many it supports (which may | |
425 | vary depending on the exact set requested. So if you want to be | |
426 | sure you have set what you think you have, check the contents of | |
427 | these attributes after everything is configured. Drivers may | |
428 | have to buffer any parameters so that they are consistent when | |
429 | a given event type is enabled a future point (and not those for | |
430 | whatever event was previously enabled). | |
431 | ||
a37b549e JC |
432 | What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en |
433 | What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en | |
434 | What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en | |
435 | What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en | |
436 | What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en | |
437 | What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en | |
d4c926f2 JC |
438 | What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en |
439 | What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en | |
440 | What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en | |
441 | What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en | |
442 | What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en | |
443 | What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en | |
a37b549e JC |
444 | What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en |
445 | What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en | |
446 | What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en | |
447 | What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en | |
448 | What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en | |
449 | What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en | |
15739cd2 JC |
450 | What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en |
451 | What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en | |
452 | What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en | |
453 | What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en | |
454 | What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en | |
455 | What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en | |
f386caa3 JC |
456 | KernelVersion: 2.6.37 |
457 | Contact: linux-iio@vger.kernel.org | |
458 | Description: | |
459 | Event generated when channel passes a threshold on the rate of | |
460 | change (1st differential) in the specified (_rising|_falling) | |
461 | direction. If the direction is not specified, then either the | |
462 | device will report an event which ever direction a single | |
15739cd2 JC |
463 | threshold value is passed in (e.g. |
464 | <type>[Y][_name]_<raw|input>_roc_value) or | |
465 | <type>[Y][_name]_<raw|input>_roc_rising_value and | |
466 | <type>[Y][_name]_<raw|input>_roc_falling_value may take | |
f386caa3 JC |
467 | different values, but the device can only enable both rate of |
468 | change thresholds or neither. | |
469 | Note the driver will assume the last p events requested are | |
470 | to be enabled where p is however many it supports (which may | |
471 | vary depending on the exact set requested. So if you want to be | |
472 | sure you have set what you think you have, check the contents of | |
473 | these attributes after everything is configured. Drivers may | |
474 | have to buffer any parameters so that they are consistent when | |
475 | a given event type is enabled a future point (and not those for | |
476 | whatever event was previously enabled). | |
477 | ||
a37b549e JC |
478 | What: /sys/.../events/in_accel_x_raw_thresh_rising_value |
479 | What: /sys/.../events/in_accel_x_raw_thresh_falling_value | |
480 | What: /sys/.../events/in_accel_y_raw_thresh_rising_value | |
481 | What: /sys/.../events/in_accel_y_raw_thresh_falling_value | |
482 | What: /sys/.../events/in_accel_z_raw_thresh_rising_value | |
483 | What: /sys/.../events/in_accel_z_raw_thresh_falling_value | |
d4c926f2 JC |
484 | What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value |
485 | What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value | |
486 | What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value | |
487 | What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value | |
488 | What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value | |
489 | What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value | |
a37b549e JC |
490 | What: /sys/.../events/in_magn_x_raw_thresh_rising_value |
491 | What: /sys/.../events/in_magn_x_raw_thresh_falling_value | |
492 | What: /sys/.../events/in_magn_y_raw_thresh_rising_value | |
493 | What: /sys/.../events/in_magn_y_raw_thresh_falling_value | |
494 | What: /sys/.../events/in_magn_z_raw_thresh_rising_value | |
495 | What: /sys/.../events/in_magn_z_raw_thresh_falling_value | |
15739cd2 JC |
496 | What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value |
497 | What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value | |
a7322fc2 | 498 | What: /sys/.../events/in_voltageY_raw_thresh_rising_value |
15739cd2 | 499 | What: /sys/.../events/in_voltageY_raw_thresh_falling_value |
a7322fc2 | 500 | What: /sys/.../events/in_tempY_raw_thresh_rising_value |
15739cd2 | 501 | What: /sys/.../events/in_tempY_raw_thresh_falling_value |
3c97c08b JB |
502 | What: /sys/.../events/in_illuminance0_thresh_falling_value |
503 | what: /sys/.../events/in_illuminance0_thresh_rising_value | |
504 | what: /sys/.../events/in_proximity0_thresh_falling_value | |
505 | what: /sys/.../events/in_proximity0_thresh_rising_value | |
2f3cc667 | 506 | KernelVersion: 2.6.37 |
e34d2c5f JC |
507 | Contact: linux-iio@vger.kernel.org |
508 | Description: | |
2f3cc667 JC |
509 | Specifies the value of threshold that the device is comparing |
510 | against for the events enabled by | |
15739cd2 JC |
511 | <type>Y[_name]_thresh[_rising|falling]_en. |
512 | If separate attributes exist for the two directions, but | |
f386caa3 JC |
513 | direction is not specified for this attribute, then a single |
514 | threshold value applies to both directions. | |
2f3cc667 JC |
515 | The raw or input element of the name indicates whether the |
516 | value is in raw device units or in processed units (as _raw | |
517 | and _input do on sysfs direct channel read attributes). | |
e34d2c5f | 518 | |
a37b549e JC |
519 | What: /sys/.../events/in_accel_x_raw_roc_rising_value |
520 | What: /sys/.../events/in_accel_x_raw_roc_falling_value | |
521 | What: /sys/.../events/in_accel_y_raw_roc_rising_value | |
522 | What: /sys/.../events/in_accel_y_raw_roc_falling_value | |
523 | What: /sys/.../events/in_accel_z_raw_roc_rising_value | |
524 | What: /sys/.../events/in_accel_z_raw_roc_falling_value | |
d4c926f2 JC |
525 | What: /sys/.../events/in_anglvel_x_raw_roc_rising_value |
526 | What: /sys/.../events/in_anglvel_x_raw_roc_falling_value | |
527 | What: /sys/.../events/in_anglvel_y_raw_roc_rising_value | |
528 | What: /sys/.../events/in_anglvel_y_raw_roc_falling_value | |
529 | What: /sys/.../events/in_anglvel_z_raw_roc_rising_value | |
530 | What: /sys/.../events/in_anglvel_z_raw_roc_falling_value | |
a37b549e JC |
531 | What: /sys/.../events/in_magn_x_raw_roc_rising_value |
532 | What: /sys/.../events/in_magn_x_raw_roc_falling_value | |
533 | What: /sys/.../events/in_magn_y_raw_roc_rising_value | |
534 | What: /sys/.../events/in_magn_y_raw_roc_falling_value | |
535 | What: /sys/.../events/in_magn_z_raw_roc_rising_value | |
536 | What: /sys/.../events/in_magn_z_raw_roc_falling_value | |
15739cd2 JC |
537 | What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value |
538 | What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value | |
a7322fc2 | 539 | What: /sys/.../events/in_voltageY_raw_roc_rising_value |
15739cd2 | 540 | What: /sys/.../events/in_voltageY_raw_roc_falling_value |
a7322fc2 | 541 | What: /sys/.../events/in_tempY_raw_roc_rising_value |
15739cd2 | 542 | What: /sys/.../events/in_tempY_raw_roc_falling_value |
2f3cc667 JC |
543 | KernelVersion: 2.6.37 |
544 | Contact: linux-iio@vger.kernel.org | |
545 | Description: | |
f386caa3 JC |
546 | Specifies the value of rate of change threshold that the |
547 | device is comparing against for the events enabled by | |
15739cd2 | 548 | <type>[Y][_name]_roc[_rising|falling]_en. |
f386caa3 JC |
549 | If separate attributes exist for the two directions, |
550 | but direction is not specified for this attribute, | |
551 | then a single threshold value applies to both directions. | |
552 | The raw or input element of the name indicates whether the | |
553 | value is in raw device units or in processed units (as _raw | |
554 | and _input do on sysfs direct channel read attributes). | |
2f3cc667 | 555 | |
a37b549e JC |
556 | What: /sys/.../events/in_accel_x_thresh_rising_period |
557 | What: /sys/.../events/in_accel_x_thresh_falling_period | |
558 | hat: /sys/.../events/in_accel_x_roc_rising_period | |
559 | What: /sys/.../events/in_accel_x_roc_falling_period | |
560 | What: /sys/.../events/in_accel_y_thresh_rising_period | |
561 | What: /sys/.../events/in_accel_y_thresh_falling_period | |
562 | What: /sys/.../events/in_accel_y_roc_rising_period | |
563 | What: /sys/.../events/in_accel_y_roc_falling_period | |
564 | What: /sys/.../events/in_accel_z_thresh_rising_period | |
565 | What: /sys/.../events/in_accel_z_thresh_falling_period | |
566 | What: /sys/.../events/in_accel_z_roc_rising_period | |
567 | What: /sys/.../events/in_accel_z_roc_falling_period | |
d4c926f2 JC |
568 | What: /sys/.../events/in_anglvel_x_thresh_rising_period |
569 | What: /sys/.../events/in_anglvel_x_thresh_falling_period | |
570 | What: /sys/.../events/in_anglvel_x_roc_rising_period | |
571 | What: /sys/.../events/in_anglvel_x_roc_falling_period | |
572 | What: /sys/.../events/in_anglvel_y_thresh_rising_period | |
573 | What: /sys/.../events/in_anglvel_y_thresh_falling_period | |
574 | What: /sys/.../events/in_anglvel_y_roc_rising_period | |
575 | What: /sys/.../events/in_anglvel_y_roc_falling_period | |
576 | What: /sys/.../events/in_anglvel_z_thresh_rising_period | |
577 | What: /sys/.../events/in_anglvel_z_thresh_falling_period | |
578 | What: /sys/.../events/in_anglvel_z_roc_rising_period | |
579 | What: /sys/.../events/in_anglvel_z_roc_falling_period | |
a37b549e JC |
580 | What: /sys/.../events/in_magn_x_thresh_rising_period |
581 | What: /sys/.../events/in_magn_x_thresh_falling_period | |
582 | What: /sys/.../events/in_magn_x_roc_rising_period | |
583 | What: /sys/.../events/in_magn_x_roc_falling_period | |
584 | What: /sys/.../events/in_magn_y_thresh_rising_period | |
585 | What: /sys/.../events/in_magn_y_thresh_falling_period | |
586 | What: /sys/.../events/in_magn_y_roc_rising_period | |
587 | What: /sys/.../events/in_magn_y_roc_falling_period | |
588 | What: /sys/.../events/in_magn_z_thresh_rising_period | |
589 | What: /sys/.../events/in_magn_z_thresh_falling_period | |
590 | What: /sys/.../events/in_magn_z_roc_rising_period | |
591 | What: /sys/.../events/in_magn_z_roc_falling_period | |
15739cd2 JC |
592 | What: /sys/.../events/in_voltageY_supply_thresh_rising_period |
593 | What: /sys/.../events/in_voltageY_supply_thresh_falling_period | |
594 | What: /sys/.../events/in_voltageY_supply_roc_rising_period | |
595 | What: /sys/.../events/in_voltageY_supply_roc_falling_period | |
596 | What: /sys/.../events/in_voltageY_thresh_rising_period | |
597 | What: /sys/.../events/in_voltageY_thresh_falling_period | |
598 | What: /sys/.../events/in_voltageY_roc_rising_period | |
599 | What: /sys/.../events/in_voltageY_roc_falling_period | |
600 | What: /sys/.../events/in_tempY_thresh_rising_period | |
601 | What: /sys/.../events/in_tempY_thresh_falling_period | |
602 | What: /sys/.../events/in_tempY_roc_rising_period | |
603 | What: /sys/.../events/in_tempY_roc_falling_period | |
a37b549e | 604 | What: /sys/.../events/in_accel_x&y&z_mag_falling_period |
3c97c08b JB |
605 | What: /sys/.../events/in_intensity0_thresh_period |
606 | What: /sys/.../events/in_proximity0_thresh_period | |
2f3cc667 | 607 | KernelVersion: 2.6.37 |
e34d2c5f JC |
608 | Contact: linux-iio@vger.kernel.org |
609 | Description: | |
f386caa3 JC |
610 | Period of time (in seconds) for which the condition must be |
611 | met before an event is generated. If direction is not | |
2f3cc667 | 612 | specified then this period applies to both directions. |
e34d2c5f | 613 | |
a37b549e JC |
614 | What: /sys/.../iio:deviceX/events/in_accel_mag_en |
615 | What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en | |
616 | What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en | |
617 | What: /sys/.../iio:deviceX/events/in_accel_x_mag_en | |
618 | What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en | |
619 | What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en | |
620 | What: /sys/.../iio:deviceX/events/in_accel_y_mag_en | |
621 | What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en | |
622 | What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en | |
623 | What: /sys/.../iio:deviceX/events/in_accel_z_mag_en | |
624 | What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en | |
625 | What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en | |
626 | What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en | |
627 | What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en | |
2f3cc667 JC |
628 | KernelVersion: 2.6.37 |
629 | Contact: linux-iio@vger.kernel.org | |
630 | Description: | |
a37b549e | 631 | Similar to in_accel_x_thresh[_rising|_falling]_en, but here the |
2f3cc667 JC |
632 | magnitude of the channel is compared to the threshold, not its |
633 | signed value. | |
e34d2c5f | 634 | |
a37b549e JC |
635 | What: /sys/.../events/in_accel_raw_mag_value |
636 | What: /sys/.../events/in_accel_x_raw_mag_rising_value | |
637 | What: /sys/.../events/in_accel_y_raw_mag_rising_value | |
638 | What: /sys/.../events/in_accel_z_raw_mag_rising_value | |
2f3cc667 JC |
639 | KernelVersion: 2.6.37 |
640 | Contact: linux-iio@vger.kernel.org | |
641 | Description: | |
f386caa3 JC |
642 | The value to which the magnitude of the channel is compared. If |
643 | number or direction is not specified, applies to all channels of | |
644 | this type. | |
2f3cc667 | 645 | |
b3874069 | 646 | What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger |
e34d2c5f JC |
647 | KernelVersion: 2.6.35 |
648 | Contact: linux-iio@vger.kernel.org | |
649 | Description: | |
650 | The name of the trigger source being used, as per string given | |
f386caa3 | 651 | in /sys/class/iio/triggerY/name. |
e34d2c5f | 652 | |
b3874069 | 653 | What: /sys/bus/iio/devices/iio:deviceX/buffer/length |
e34d2c5f JC |
654 | KernelVersion: 2.6.35 |
655 | Contact: linux-iio@vger.kernel.org | |
656 | Description: | |
657 | Number of scans contained by the buffer. | |
658 | ||
b3874069 | 659 | What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum |
5770b8ff | 660 | KernelVersion: 2.6.37 |
e34d2c5f JC |
661 | Contact: linux-iio@vger.kernel.org |
662 | Description: | |
663 | Bytes per scan. Due to alignment fun, the scan may be larger | |
664 | than implied directly by the scan_element parameters. | |
665 | ||
b3874069 | 666 | What: /sys/bus/iio/devices/iio:deviceX/buffer/enable |
e34d2c5f JC |
667 | KernelVersion: 2.6.35 |
668 | Contact: linux-iio@vger.kernel.org | |
669 | Description: | |
670 | Actually start the buffer capture up. Will start trigger | |
671 | if first device and appropriate. | |
672 | ||
b3874069 | 673 | What: /sys/bus/iio/devices/iio:deviceX/buffer/scan_elements |
5770b8ff MS |
674 | KernelVersion: 2.6.37 |
675 | Contact: linux-iio@vger.kernel.org | |
676 | Description: | |
2f3cc667 JC |
677 | Directory containing interfaces for elements that will be |
678 | captured for a single triggered sample set in the buffer. | |
5770b8ff | 679 | |
a37b549e JC |
680 | What: /sys/.../buffer/scan_elements/in_accel_x_en |
681 | What: /sys/.../buffer/scan_elements/in_accel_y_en | |
682 | What: /sys/.../buffer/scan_elements/in_accel_z_en | |
d4c926f2 JC |
683 | What: /sys/.../buffer/scan_elements/in_anglvel_x_en |
684 | What: /sys/.../buffer/scan_elements/in_anglvel_y_en | |
685 | What: /sys/.../buffer/scan_elements/in_anglvel_z_en | |
a37b549e JC |
686 | What: /sys/.../buffer/scan_elements/in_magn_x_en |
687 | What: /sys/.../buffer/scan_elements/in_magn_y_en | |
688 | What: /sys/.../buffer/scan_elements/in_magn_z_en | |
689 | What: /sys/.../buffer/scan_elements/in_timestamp_en | |
690 | What: /sys/.../buffer/scan_elements/in_voltageY_supply_en | |
691 | What: /sys/.../buffer/scan_elements/in_voltageY_en | |
692 | What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en | |
693 | What: /sys/.../buffer/scan_elements/in_incli_x_en | |
694 | What: /sys/.../buffer/scan_elements/in_incli_y_en | |
5770b8ff MS |
695 | KernelVersion: 2.6.37 |
696 | Contact: linux-iio@vger.kernel.org | |
697 | Description: | |
10ba8ea9 | 698 | Scan element control for triggered data capture. |
5770b8ff | 699 | |
a37b549e | 700 | What: /sys/.../buffer/scan_elements/in_accel_type |
d4c926f2 | 701 | What: /sys/.../buffer/scan_elements/in_anglvel_type |
a37b549e JC |
702 | What: /sys/.../buffer/scan_elements/in_magn_type |
703 | What: /sys/.../buffer/scan_elements/in_incli_type | |
704 | What: /sys/.../buffer/scan_elements/in_voltageY_type | |
705 | What: /sys/.../buffer/scan_elements/in_voltage-in_type | |
706 | What: /sys/.../buffer/scan_elements/in_voltageY_supply_type | |
707 | What: /sys/.../buffer/scan_elements/in_timestamp_type | |
5770b8ff MS |
708 | KernelVersion: 2.6.37 |
709 | Contact: linux-iio@vger.kernel.org | |
710 | Description: | |
10ba8ea9 | 711 | Description of the scan element data storage within the buffer |
f386caa3 | 712 | and hence the form in which it is read from user-space. |
15739cd2 JC |
713 | Form is [be|le]:[s|u]bits/storagebits[>>shift]. |
714 | be or le specifies big or little endian. s or u specifies if | |
f386caa3 JC |
715 | signed (2's complement) or unsigned. bits is the number of bits |
716 | of data and storagebits is the space (after padding) that it | |
717 | occupies in the buffer. shift if specified, is the shift that | |
718 | needs to be applied prior to masking out unused bits. Some | |
719 | devices put their data in the middle of the transferred elements | |
720 | with additional information on both sides. Note that some | |
721 | devices will have additional information in the unused bits | |
722 | so to get a clean value, the bits value must be used to mask | |
723 | the buffer output value appropriately. The storagebits value | |
724 | also specifies the data alignment. So s48/64>>2 will be a | |
725 | signed 48 bit integer stored in a 64 bit location aligned to | |
726 | a a64 bit boundary. To obtain the clean value, shift right 2 | |
727 | and apply a mask to zero the top 16 bits of the result. | |
10ba8ea9 JC |
728 | For other storage combinations this attribute will be extended |
729 | appropriately. | |
730 | ||
a37b549e | 731 | What: /sys/.../buffer/scan_elements/in_accel_type_available |
f386caa3 JC |
732 | KernelVersion: 2.6.37 |
733 | Contact: linux-iio@vger.kernel.org | |
734 | Description: | |
735 | If the type parameter can take one of a small set of values, | |
736 | this attribute lists them. | |
737 | ||
a37b549e JC |
738 | What: /sys/.../buffer/scan_elements/in_voltageY_index |
739 | What: /sys/.../buffer/scan_elements/in_voltageY_supply_index | |
740 | What: /sys/.../buffer/scan_elements/in_accel_x_index | |
741 | What: /sys/.../buffer/scan_elements/in_accel_y_index | |
742 | What: /sys/.../buffer/scan_elements/in_accel_z_index | |
d4c926f2 JC |
743 | What: /sys/.../buffer/scan_elements/in_anglvel_x_index |
744 | What: /sys/.../buffer/scan_elements/in_anglvel_y_index | |
745 | What: /sys/.../buffer/scan_elements/in_anglvel_z_index | |
a37b549e JC |
746 | What: /sys/.../buffer/scan_elements/in_magn_x_index |
747 | What: /sys/.../buffer/scan_elements/in_magn_y_index | |
748 | What: /sys/.../buffer/scan_elements/in_magn_z_index | |
749 | What: /sys/.../buffer/scan_elements/in_incli_x_index | |
750 | What: /sys/.../buffer/scan_elements/in_incli_y_index | |
15739cd2 | 751 | What: /sys/.../buffer/scan_elements/in_timestamp_index |
10ba8ea9 JC |
752 | KernelVersion: 2.6.37 |
753 | Contact: linux-iio@vger.kernel.org | |
754 | Description: | |
755 | A single positive integer specifying the position of this | |
f386caa3 JC |
756 | scan element in the buffer. Note these are not dependent on |
757 | what is enabled and may not be contiguous. Thus for user-space | |
10ba8ea9 JC |
758 | to establish the full layout these must be used in conjunction |
759 | with all _en attributes to establish which channels are present, | |
760 | and the relevant _type attributes to establish the data storage | |
761 | format. | |
d4894635 | 762 | |
d4c926f2 | 763 | What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw |
d4894635 | 764 | KernelVersion: 2.6.38 |
a37b549e | 765 | Contact: linux-iio@vger.kernel.org |
d4894635 MH |
766 | Description: |
767 | This attribute is used to read the amount of quadrature error | |
768 | present in the device at a given time. |