projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 4e6d1bbc MP |
1 | Tegra124 SoC SATA AHCI controller |
| 2 | ||
| 3 | Required properties : | |
| 193c9d23 PW |
4 | - compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, |
| 5 | must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> | |
| 6 | is tegra132. | |
| 4e6d1bbc MP |
7 | - reg : Should contain 2 entries: |
| 8 | - AHCI register set (SATA BAR5) | |
| 9 | - SATA register set | |
| 10 | - interrupts : Defines the interrupt used by SATA | |
| 11 | - clocks : Must contain an entry for each entry in clock-names. | |
| 12 | See ../clocks/clock-bindings.txt for details. | |
| 13 | - clock-names : Must include the following entries: | |
| 14 | - sata | |
| 15 | - sata-oob | |
| 16 | - cml1 | |
| 17 | - pll_e | |
| 18 | - resets : Must contain an entry for each entry in reset-names. | |
| 19 | See ../reset/reset.txt for details. | |
| 20 | - reset-names : Must include the following entries: | |
| 21 | - sata | |
| 22 | - sata-oob | |
| 23 | - sata-cold | |
| 24 | - phys : Must contain an entry for each entry in phy-names. | |
| 25 | See ../phy/phy-bindings.txt for details. | |
| 26 | - phy-names : Must include the following entries: | |
| 27 | - sata-phy : XUSB PADCTL SATA PHY | |
| 28 | - hvdd-supply : Defines the SATA HVDD regulator | |
| 29 | - vddio-supply : Defines the SATA VDDIO regulator | |
| 30 | - avdd-supply : Defines the SATA AVDD regulator | |
| 31 | - target-5v-supply : Defines the SATA 5V power regulator | |
| 32 | - target-12v-supply : Defines the SATA 12V power regulator |