Commit | Line | Data |
---|---|---|
4e6d1bbc MP |
1 | Tegra124 SoC SATA AHCI controller |
2 | ||
3 | Required properties : | |
193c9d23 PW |
4 | - compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, |
5 | must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> | |
6 | is tegra132. | |
4e6d1bbc MP |
7 | - reg : Should contain 2 entries: |
8 | - AHCI register set (SATA BAR5) | |
9 | - SATA register set | |
10 | - interrupts : Defines the interrupt used by SATA | |
11 | - clocks : Must contain an entry for each entry in clock-names. | |
12 | See ../clocks/clock-bindings.txt for details. | |
13 | - clock-names : Must include the following entries: | |
14 | - sata | |
15 | - sata-oob | |
16 | - cml1 | |
17 | - pll_e | |
18 | - resets : Must contain an entry for each entry in reset-names. | |
19 | See ../reset/reset.txt for details. | |
20 | - reset-names : Must include the following entries: | |
21 | - sata | |
22 | - sata-oob | |
23 | - sata-cold | |
24 | - phys : Must contain an entry for each entry in phy-names. | |
25 | See ../phy/phy-bindings.txt for details. | |
26 | - phy-names : Must include the following entries: | |
27 | - sata-phy : XUSB PADCTL SATA PHY | |
28 | - hvdd-supply : Defines the SATA HVDD regulator | |
29 | - vddio-supply : Defines the SATA VDDIO regulator | |
30 | - avdd-supply : Defines the SATA AVDD regulator | |
31 | - target-5v-supply : Defines the SATA 5V power regulator | |
32 | - target-12v-supply : Defines the SATA 12V power regulator |