Commit | Line | Data |
---|---|---|
4a83eecf AC |
1 | * GPIO driven matrix keypad device tree bindings |
2 | ||
3 | GPIO driven matrix keypad is used to interface a SoC with a matrix keypad. | |
4 | The matrix keypad supports multiple row and column lines, a key can be | |
5 | placed at each intersection of a unique row and a unique column. The matrix | |
6 | keypad can sense a key-press and key-release by means of GPIO lines and | |
7 | report the event using GPIO interrupts to the cpu. | |
8 | ||
9 | Required Properties: | |
10 | - compatible: Should be "gpio-matrix-keypad" | |
11 | - row-gpios: List of gpios used as row lines. The gpio specifier | |
12 | for this property depends on the gpio controller to | |
13 | which these row lines are connected. | |
14 | - col-gpios: List of gpios used as column lines. The gpio specifier | |
15 | for this property depends on the gpio controller to | |
16 | which these column lines are connected. | |
17 | - linux,keymap: The definition can be found at | |
18 | bindings/input/matrix-keymap.txt | |
19 | ||
20 | Optional Properties: | |
21 | - linux,no-autorepeat: do no enable autorepeat feature. | |
aeda5003 | 22 | - wakeup-source: use any event on keypad as wakeup event. |
71a0151c | 23 | (Legacy property supported: "linux,wakeup") |
4a83eecf AC |
24 | - debounce-delay-ms: debounce interval in milliseconds |
25 | - col-scan-delay-us: delay, measured in microseconds, that is needed | |
26 | before we can scan keypad after activating column gpio | |
27 | ||
28 | Example: | |
29 | matrix-keypad { | |
30 | compatible = "gpio-matrix-keypad"; | |
31 | debounce-delay-ms = <5>; | |
32 | col-scan-delay-us = <2>; | |
33 | ||
34 | row-gpios = <&gpio2 25 0 | |
35 | &gpio2 26 0 | |
36 | &gpio2 27 0>; | |
37 | ||
38 | col-gpios = <&gpio2 21 0 | |
39 | &gpio2 22 0>; | |
40 | ||
41 | linux,keymap = <0x0000008B | |
42 | 0x0100009E | |
43 | 0x02000069 | |
44 | 0x0001006A | |
45 | 0x0101001C | |
46 | 0x0201006C>; | |
47 | }; |