Commit | Line | Data |
---|---|---|
18b4bad3 AT |
1 | * Marvell PXA168 Ethernet Controller |
2 | ||
3 | Required properties: | |
4 | - compatible: should be "marvell,pxa168-eth". | |
5 | - reg: address and length of the register set for the device. | |
6 | - interrupts: interrupt for the device. | |
7 | - clocks: pointer to the clock for the device. | |
8 | ||
9 | Optional properties: | |
10 | - port-id: Ethernet port number. Should be '0','1' or '2'. | |
11 | - #address-cells: must be 1 when using sub-nodes. | |
12 | - #size-cells: must be 0 when using sub-nodes. | |
13 | - phy-handle: see ethernet.txt file in the same directory. | |
14 | - local-mac-address: see ethernet.txt file in the same directory. | |
15 | ||
16 | Sub-nodes: | |
17 | Each PHY can be represented as a sub-node. This is not mandatory. | |
18 | ||
19 | Sub-nodes required properties: | |
20 | - reg: the MDIO address of the PHY. | |
21 | ||
22 | Example: | |
23 | ||
24 | eth0: ethernet@f7b90000 { | |
25 | compatible = "marvell,pxa168-eth"; | |
26 | reg = <0xf7b90000 0x10000>; | |
27 | clocks = <&chip CLKID_GETH0>; | |
28 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; | |
29 | #address-cells = <1>; | |
30 | #size-cells = <0>; | |
31 | phy-handle = <ðphy0>; | |
32 | ||
33 | ethphy0: ethernet-phy@0 { | |
34 | reg = <0>; | |
35 | }; | |
36 | }; |