Commit | Line | Data |
---|---|---|
aa1facbd AL |
1 | * Marvell MVEBU SATA PHY |
2 | ||
3 | Power control for the SATA phy found on Marvell MVEBU SoCs. | |
4 | ||
5 | This document extends the binding described in phy-bindings.txt | |
6 | ||
7 | Required properties : | |
8 | ||
9 | - reg : Offset and length of the register set for the SATA device | |
10 | - compatible : Should be "marvell,mvebu-sata-phy" | |
11 | - clocks : phandle of clock and specifier that supplies the device | |
12 | - clock-names : Should be "sata" | |
13 | ||
14 | Example: | |
15 | sata-phy@84000 { | |
16 | compatible = "marvell,mvebu-sata-phy"; | |
17 | reg = <0x84000 0x0334>; | |
18 | clocks = <&gate_clk 15>; | |
19 | clock-names = "sata"; | |
20 | #phy-cells = <0>; | |
21 | status = "ok"; | |
22 | }; | |
1a6ab1c0 GC |
23 | |
24 | Armada 375 USB cluster | |
25 | ---------------------- | |
26 | ||
27 | Armada 375 comes with an USB2 host and device controller and an USB3 | |
28 | controller. The USB cluster control register allows to manage common | |
29 | features of both USB controllers. | |
30 | ||
31 | Required properties: | |
32 | ||
33 | - compatible: "marvell,armada-375-usb-cluster" | |
34 | - reg: Should contain usb cluster register location and length. | |
35 | - #phy-cells : from the generic phy bindings, must be 1. Possible | |
36 | values are 1 (USB2), 2 (USB3). | |
37 | ||
38 | Example: | |
39 | usbcluster: usb-cluster@18400 { | |
40 | compatible = "marvell,armada-375-usb-cluster"; | |
41 | reg = <0x18400 0x4>; | |
42 | #phy-cells = <1> | |
43 | }; |