[deliverable/linux.git] / Documentation / devicetree / bindings / phy / pxa1928-usb-phy.txt

* Marvell PXA1928 USB and HSIC PHYs

Required properties:
- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
- reg: base address and length of the registers
- clocks - A single clock. From common clock binding.
- #phys-cells: should be 0. From commmon phy binding.
- resets: reference to the reset controller

Example:

	usbphy: phy@7000 {
		compatible = "marvell,pxa1928-usb-phy";
		reg = <0x7000 0xe0>;
		clocks = <&apmu_clocks PXA1928_CLK_USB>;
		#phy-cells = <0>;
	};
Commit	Line	Data
6c95ff9c RH	1	* Marvell PXA1928 USB and HSIC PHYs
	2
	3	Required properties:
	4	- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
	5	- reg: base address and length of the registers
	6	- clocks - A single clock. From common clock binding.
	7	- #phys-cells: should be 0. From commmon phy binding.
	8	- resets: reference to the reset controller
	9
	10	Example:
	11
	12	usbphy: phy@7000 {
	13	compatible = "marvell,pxa1928-usb-phy";
	14	reg = <0x7000 0xe0>;
	15	clocks = <&apmu_clocks PXA1928_CLK_USB>;
	16	#phy-cells = <0>;
	17	};
	18