Commit | Line | Data |
---|---|---|
0b8eebc0 | 1 | ACT88xx regulators |
cbfadd3d WY |
2 | ------------------- |
3 | ||
4 | Required properties: | |
df3a950e | 5 | - compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" |
cbfadd3d WY |
6 | - reg: I2C slave address |
7 | ||
7a5f5d7b | 8 | Optional properties: |
8f73110f RP |
9 | - system-power-controller: Telling whether or not this pmic is controlling |
10 | the system power. See Documentation/devicetree/bindings/power/power-controller.txt . | |
1f37cbe2 WY |
11 | - active-semi,vsel-high: Indicates the VSEL pin is high. |
12 | If this property is missing, assume the VSEL pin is low(0). | |
7a5f5d7b | 13 | |
c8b263cc HS |
14 | Optional input supply properties: |
15 | - for act8600: | |
16 | - vp1-supply: The input supply for DCDC_REG1 | |
17 | - vp2-supply: The input supply for DCDC_REG2 | |
18 | - vp3-supply: The input supply for DCDC_REG3 | |
19 | - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 | |
20 | SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. | |
21 | - for act8846: | |
22 | - vp1-supply: The input supply for REG1 | |
23 | - vp2-supply: The input supply for REG2 | |
24 | - vp3-supply: The input supply for REG3 | |
25 | - vp4-supply: The input supply for REG4 | |
26 | - inl1-supply: The input supply for REG5, REG6 and REG7 | |
27 | - inl2-supply: The input supply for REG8 and LDO_REG9 | |
28 | - inl3-supply: The input supply for REG10, REG11 and REG12 | |
29 | - for act8865: | |
30 | - vp1-supply: The input supply for DCDC_REG1 | |
31 | - vp2-supply: The input supply for DCDC_REG2 | |
32 | - vp3-supply: The input supply for DCDC_REG3 | |
33 | - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 | |
34 | - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 | |
35 | ||
cbfadd3d WY |
36 | Any standard regulator properties can be used to configure the single regulator. |
37 | ||
38 | The valid names for regulators are: | |
0b8eebc0 BG |
39 | - for act8846: |
40 | REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 | |
41 | - for act8865: | |
cbfadd3d | 42 | DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. |
df3a950e ZLK |
43 | - for act8600: |
44 | DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, | |
45 | LDO_REG8, LDO_REG9, LDO_REG10, | |
cbfadd3d WY |
46 | |
47 | Example: | |
48 | -------- | |
49 | ||
50 | i2c1: i2c@f0018000 { | |
51 | pmic: act8865@5b { | |
52 | compatible = "active-semi,act8865"; | |
53 | reg = <0x5b>; | |
1f37cbe2 | 54 | active-semi,vsel-high; |
cbfadd3d WY |
55 | status = "disabled"; |
56 | ||
57 | regulators { | |
58 | vcc_1v8_reg: DCDC_REG1 { | |
59 | regulator-name = "VCC_1V8"; | |
60 | regulator-min-microvolt = <1800000>; | |
61 | regulator-max-microvolt = <1800000>; | |
62 | regulator-always-on; | |
63 | }; | |
64 | ||
65 | vcc_1v2_reg: DCDC_REG2 { | |
66 | regulator-name = "VCC_1V2"; | |
67 | regulator-min-microvolt = <1100000>; | |
68 | regulator-max-microvolt = <1300000>; | |
69 | regulator-suspend-mem-microvolt = <1150000>; | |
70 | regulator-suspend-standby-microvolt = <1150000>; | |
71 | regulator-always-on; | |
72 | }; | |
73 | ||
74 | vcc_3v3_reg: DCDC_REG3 { | |
75 | regulator-name = "VCC_3V3"; | |
76 | regulator-min-microvolt = <3300000>; | |
77 | regulator-max-microvolt = <3300000>; | |
78 | regulator-always-on; | |
79 | }; | |
80 | ||
81 | vddana_reg: LDO_REG1 { | |
82 | regulator-name = "VDDANA"; | |
83 | regulator-min-microvolt = <3300000>; | |
84 | regulator-max-microvolt = <3300000>; | |
85 | regulator-always-on; | |
86 | }; | |
87 | ||
88 | vddfuse_reg: LDO_REG2 { | |
89 | regulator-name = "FUSE_2V5"; | |
90 | regulator-min-microvolt = <2500000>; | |
91 | regulator-max-microvolt = <2500000>; | |
92 | }; | |
93 | }; | |
94 | }; | |
95 | }; |