Commit | Line | Data |
---|---|---|
cbfadd3d WY |
1 | ACT8865 regulator |
2 | ------------------- | |
3 | ||
4 | Required properties: | |
5 | - compatible: "active-semi,act8865" | |
6 | - reg: I2C slave address | |
7 | ||
8 | Any standard regulator properties can be used to configure the single regulator. | |
9 | ||
10 | The valid names for regulators are: | |
11 | DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. | |
12 | ||
13 | Example: | |
14 | -------- | |
15 | ||
16 | i2c1: i2c@f0018000 { | |
17 | pmic: act8865@5b { | |
18 | compatible = "active-semi,act8865"; | |
19 | reg = <0x5b>; | |
20 | status = "disabled"; | |
21 | ||
22 | regulators { | |
23 | vcc_1v8_reg: DCDC_REG1 { | |
24 | regulator-name = "VCC_1V8"; | |
25 | regulator-min-microvolt = <1800000>; | |
26 | regulator-max-microvolt = <1800000>; | |
27 | regulator-always-on; | |
28 | }; | |
29 | ||
30 | vcc_1v2_reg: DCDC_REG2 { | |
31 | regulator-name = "VCC_1V2"; | |
32 | regulator-min-microvolt = <1100000>; | |
33 | regulator-max-microvolt = <1300000>; | |
34 | regulator-suspend-mem-microvolt = <1150000>; | |
35 | regulator-suspend-standby-microvolt = <1150000>; | |
36 | regulator-always-on; | |
37 | }; | |
38 | ||
39 | vcc_3v3_reg: DCDC_REG3 { | |
40 | regulator-name = "VCC_3V3"; | |
41 | regulator-min-microvolt = <3300000>; | |
42 | regulator-max-microvolt = <3300000>; | |
43 | regulator-always-on; | |
44 | }; | |
45 | ||
46 | vddana_reg: LDO_REG1 { | |
47 | regulator-name = "VDDANA"; | |
48 | regulator-min-microvolt = <3300000>; | |
49 | regulator-max-microvolt = <3300000>; | |
50 | regulator-always-on; | |
51 | }; | |
52 | ||
53 | vddfuse_reg: LDO_REG2 { | |
54 | regulator-name = "FUSE_2V5"; | |
55 | regulator-min-microvolt = <2500000>; | |
56 | regulator-max-microvolt = <2500000>; | |
57 | }; | |
58 | }; | |
59 | }; | |
60 | }; |