projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 8d561b60 K |
1 | * palmas regulator IP block devicetree bindings |
| 2 | ||
| 3 | Required properties: | |
| 4 | - compatible : Should be from the list | |
| 5 | ti,twl6035-pmic | |
| 6 | ti,twl6036-pmic | |
| 7 | ti,twl6037-pmic | |
| 8 | ti,tps65913-pmic | |
| 9 | ti,tps65914-pmic | |
| 10 | and also the generic series names | |
| 11 | ti,palmas-pmic | |
| 12 | - interrupt-parent : The parent interrupt controller which is palmas. | |
| 13 | - interrupts : The interrupt number and the type which can be looked up here: | |
| 14 | arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h | |
| 15 | - interrupts-name: The names of the individual interrupts. | |
| 16 | ||
| 17 | Optional properties: | |
| 18 | - ti,ldo6-vibrator : ldo6 is in vibrator mode | |
| 19 | ||
| 20 | Optional nodes: | |
| 21 | - regulators : Must contain a sub-node per regulator from the list below. | |
| 22 | Each sub-node should contain the constraints and initialization | |
| 23 | information for that regulator. See regulator.txt for a | |
| 24 | description of standard properties for these sub-nodes. | |
| 25 | Additional custom properties are listed below. | |
| 26 | ||
| 27 | For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, | |
| 28 | smps45, smps457, smps7 depending on variant, smps6, smps[8-10], | |
| 29 | ldo[1-9], ldoln, ldousb. | |
| 30 | ||
| 31 | Optional sub-node properties: | |
| 32 | ti,warm-reset - maintain voltage during warm reset(boolean) | |
| 33 | ti,roof-floor - control voltage selection by pin(boolean) | |
| 34 | ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, | |
| 35 | 2 - eco, 3 - forced pwm | |
| 36 | ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us | |
| 37 | ti,smps-range - OTP has the wrong range set for the hardware so override | |
| 38 | 0 - low range, 1 - high range. | |
| 39 | ||
| 40 | Example: | |
| 41 | ||
| 42 | #include <dt-bindings/interrupt-controller/irq.h> | |
| 43 | ||
| 44 | pmic { | |
| 45 | compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; | |
| 46 | interrupt-parent = <&palmas>; | |
| 47 | interrupts = <14 IRQ_TYPE_NONE>; | |
| 48 | interrupts-name = "short-irq"; | |
| 49 | ||
| 50 | ti,ldo6-vibrator; | |
| 51 | ||
| 52 | regulators { | |
| 53 | smps12_reg : smps12 { | |
| 54 | regulator-name = "smps12"; | |
| 55 | regulator-min-microvolt = < 600000>; | |
| 56 | regulator-max-microvolt = <1500000>; | |
| 57 | regulator-always-on; | |
| 58 | regulator-boot-on; | |
| 59 | ti,warm-reset; | |
| 60 | ti,roof-floor; | |
| 61 | ti,mode-sleep = <0>; | |
| 62 | ti,tstep = <0>; | |
| 63 | ti,smps-range = <1>; | |
| 64 | }; | |
| 65 | ||
| 66 | ldo1_reg: ldo1 { | |
| 67 | regulator-name = "ldo1"; | |
| 68 | regulator-min-microvolt = <2800000>; | |
| 69 | regulator-max-microvolt = <2800000>; | |
| 70 | }; | |
| 71 | }; | |
| 72 | }; |