Commit | Line | Data |
---|---|---|
c51ce403 LD |
1 | TPS51632 Voltage regulators |
2 | ||
3 | Required properties: | |
4 | - compatible: Must be "ti,tps51632" | |
5 | - reg: I2C slave address | |
6 | ||
7 | Optional properties: | |
8 | - ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. | |
9 | - ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this | |
10 | will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage | |
11 | step is 10mV as per datasheet. | |
12 | ||
13 | Any property defined as part of the core regulator binding, defined in | |
14 | regulator.txt, can also be used. | |
15 | ||
16 | Example: | |
17 | ||
18 | tps51632 { | |
19 | compatible = "ti,tps51632"; | |
20 | reg = <0x43>; | |
21 | regulator-name = "tps51632-vout"; | |
22 | regulator-min-microvolt = <500000>; | |
23 | regulator-max-microvolt = <1500000>; | |
24 | regulator-boot-on; | |
25 | ti,enable-pwm-dvfs; | |
26 | ti,dvfs-step-20mV; | |
27 | }; |