Commit | Line | Data |
---|---|---|
3e3b8c34 HG |
1 | Texas Instruments McASP controller |
2 | ||
3 | Required properties: | |
4 | - compatible : | |
5 | "ti,dm646x-mcasp-audio" : for DM646x platforms | |
6 | "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms | |
a42efd97 | 7 | "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) |
453c4990 | 8 | "ti,dra7-mcasp-audio" : for DRA7xx platforms |
3e3b8c34 | 9 | |
256ba181 JS |
10 | - reg : Should contain reg specifiers for the entries in the reg-names property. |
11 | - reg-names : Should contain: | |
12 | * "mpu" for the main registers (required). For compatibility with | |
13 | existing software, it is recommended this is the first entry. | |
14 | * "dat" for separate data port register access (optional). | |
62561b39 JS |
15 | - op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF, |
16 | IEC60958-1, and AES-3 formats. | |
17 | - tdm-slots : Slots for TDM operation. Indicates number of channels transmitted | |
18 | or received over one serializer. | |
62561b39 JS |
19 | - serial-dir : A list of serializer configuration. Each entry is a number |
20 | indication for serializer pin direction. | |
21 | (0 - INACTIVE, 1 - TX, 2 - RX) | |
4023fe6f JS |
22 | - dmas: two element list of DMA controller phandles and DMA request line |
23 | ordered pairs. | |
24 | - dma-names: identifier string for each DMA request line in the dmas property. | |
25 | These strings correspond 1:1 with the ordered pairs in dmas. The dma | |
26 | identifiers must be "rx" and "tx". | |
3e3b8c34 | 27 | |
3e3b8c34 HG |
28 | Optional properties: |
29 | ||
30 | - ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 | |
31 | - tx-num-evt : FIFO levels. | |
32 | - rx-num-evt : FIFO levels. | |
33 | - sram-size-playback : size of sram to be allocated during playback | |
34 | - sram-size-capture : size of sram to be allocated during capture | |
a7a3324a | 35 | - interrupts : Interrupt numbers for McASP |
62561b39 JS |
36 | - interrupt-names : Known interrupt names are "tx" and "rx" |
37 | - pinctrl-0: Should specify pin control group used for this controller. | |
38 | - pinctrl-names: Should contain only one value - "default", for more details | |
39 | please refer to pinctrl-bindings.txt | |
ae726e93 PU |
40 | - fck_parent : Should contain a valid clock name which will be used as parent |
41 | for the McASP fck | |
3e3b8c34 HG |
42 | |
43 | Example: | |
44 | ||
45 | mcasp0: mcasp0@1d00000 { | |
46 | compatible = "ti,da830-mcasp-audio"; | |
3e3b8c34 | 47 | reg = <0x100000 0x3000>; |
256ba181 | 48 | reg-names "mpu"; |
62561b39 | 49 | interrupts = <82>, <83>; |
ae107d06 | 50 | interrupt-names = "tx", "rx"; |
3e3b8c34 HG |
51 | op-mode = <0>; /* MCASP_IIS_MODE */ |
52 | tdm-slots = <2>; | |
3e3b8c34 HG |
53 | serial-dir = < |
54 | 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ | |
55 | 0 0 0 0 | |
56 | 0 0 0 1 | |
57 | 2 0 0 0 >; | |
58 | tx-num-evt = <1>; | |
59 | rx-num-evt = <1>; | |
60 | }; |