projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| c448303e SG |
1 | Freescale i.MX audio complex with SGTL5000 codec |
| 2 | ||
| 3 | Required properties: | |
| 4 | - compatible : "fsl,imx-audio-sgtl5000" | |
| 5 | - model : The user-visible name of this sound complex | |
| 6 | - ssi-controller : The phandle of the i.MX SSI controller | |
| 7 | - audio-codec : The phandle of the SGTL5000 audio codec | |
| 172b4c5c SG |
8 | - audio-routing : A list of the connections between audio components. |
| 9 | Each entry is a pair of strings, the first being the connection's sink, | |
| 10 | the second being the connection's source. Valid names could be power | |
| 11 | supplies, SGTL5000 pins, and the jacks on the board: | |
| 12 | ||
| 13 | Power supplies: | |
| 14 | * Mic Bias | |
| 15 | ||
| 16 | SGTL5000 pins: | |
| 17 | * MIC_IN | |
| 18 | * LINE_IN | |
| 19 | * HP_OUT | |
| 20 | * LINE_OUT | |
| 21 | ||
| 22 | Board connectors: | |
| 23 | * Mic Jack | |
| 24 | * Line In Jack | |
| 25 | * Headphone Jack | |
| 26 | * Line Out Jack | |
| 27 | * Ext Spk | |
| 28 | ||
| c448303e SG |
29 | - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) |
| 30 | - mux-ext-port : The external port of the i.MX audio muxer | |
| 31 | ||
| 32 | Note: The AUDMUX port numbering should start at 1, which is consistent with | |
| 33 | hardware manual. | |
| 34 | ||
| 35 | Example: | |
| 36 | ||
| 37 | sound { | |
| 38 | compatible = "fsl,imx51-babbage-sgtl5000", | |
| 39 | "fsl,imx-audio-sgtl5000"; | |
| 40 | model = "imx51-babbage-sgtl5000"; | |
| 41 | ssi-controller = <&ssi1>; | |
| 42 | audio-codec = <&sgtl5000>; | |
| 172b4c5c | 43 | audio-routing = |
| 065899c9 | 44 | "MIC_IN", "Mic Jack", |
| 172b4c5c | 45 | "Mic Jack", "Mic Bias", |
| 172b4c5c | 46 | "Headphone Jack", "HP_OUT"; |
| c448303e SG |
47 | mux-int-port = <1>; |
| 48 | mux-ext-port = <3>; | |
| 49 | }; |