[deliverable/linux.git] / Documentation / devicetree / bindings / sound / rockchip-i2s.txt

* Rockchip I2S controller

The I2S bus (Inter-IC sound bus) is a serial link for digital
audio data transfer between devices in the system.

Required properties:

- compatible: should be one of the followings
   - "rockchip,rk3066-i2s": for rk3066
   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
- reg: physical base address of the controller and length of memory mapped
  region.
- interrupts: should contain the I2S interrupt.
- #address-cells: should be 1.
- #size-cells: should be 0.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
	Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain followings:
   - "i2s_hclk": clock for I2S BUS
   - "i2s_clk" : clock for I2S controller

Example for rk3288 I2S controller:

i2s@ff890000 {
	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
	reg = <0xff890000 0x10000>;
	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;
	dmas = <&pdma1 0>, <&pdma1 1>;
	dma-names = "tx", "rx";
	clock-names = "i2s_hclk", "i2s_clk";
	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
};
Commit	Line	Data
d4796e35 JX	1	* Rockchip I2S controller
	2
	3	The I2S bus (Inter-IC sound bus) is a serial link for digital
	4	audio data transfer between devices in the system.
	5
	6	Required properties:
	7
	8	- compatible: should be one of the followings
	9	- "rockchip,rk3066-i2s": for rk3066
	10	- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
	11	- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
	12	- reg: physical base address of the controller and length of memory mapped
	13	region.
	14	- interrupts: should contain the I2S interrupt.
	15	- #address-cells: should be 1.
	16	- #size-cells: should be 0.
	17	- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
	18	Documentation/devicetree/bindings/dma/dma.txt
	19	- dma-names: should include "tx" and "rx".
	20	- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
	21	- clock-names: should contain followings:
	22	- "i2s_hclk": clock for I2S BUS
	23	- "i2s_clk" : clock for I2S controller
	24
	25	Example for rk3288 I2S controller:
	26
	27	i2s@ff890000 {
	28	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
	29	reg = <0xff890000 0x10000>;
	30	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
	31	#address-cells = <1>;
	32	#size-cells = <0>;
	33	dmas = <&pdma1 0>, <&pdma1 1>;
d67f660e	34	dma-names = "tx", "rx";
d4796e35 JX	35	clock-names = "i2s_hclk", "i2s_clk";
	36	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
	37	};