Commit | Line | Data |
---|---|---|
f9f6a592 AP |
1 | RT5677 audio CODEC |
2 | ||
3 | This device supports I2C only. | |
4 | ||
5 | Required properties: | |
6 | ||
7 | - compatible : "realtek,rt5677". | |
8 | ||
9 | - reg : The I2C address of the device. | |
10 | ||
11 | - interrupts : The CODEC's interrupt output. | |
12 | ||
0e612ff1 AP |
13 | - gpio-controller : Indicates this device is a GPIO controller. |
14 | ||
15 | - #gpio-cells : Should be two. The first cell is the pin number and the | |
16 | second cell is used to specify optional parameters (currently unused). | |
17 | ||
f9f6a592 AP |
18 | Optional properties: |
19 | ||
20 | - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. | |
21 | ||
6f67c380 AP |
22 | - realtek,in1-differential |
23 | - realtek,in2-differential | |
24 | - realtek,lout1-differential | |
25 | - realtek,lout2-differential | |
26 | - realtek,lout3-differential | |
27 | Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential, | |
28 | rather than single-ended. | |
29 | ||
40eb90a1 AP |
30 | - realtek,gpio-config |
31 | Array of six 8bit elements that configures GPIO. | |
32 | 0 - floating (reset value) | |
33 | 1 - pull down | |
34 | 2 - pull up | |
35 | ||
5e3363ad OC |
36 | - realtek,jd1-gpio |
37 | Configures GPIO Mic Jack detection 1. | |
38 | Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively. | |
39 | ||
40 | - realtek,jd2-gpio | |
41 | - realtek,jd3-gpio | |
42 | Configures GPIO Mic Jack detection 2 and 3. | |
43 | Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively. | |
44 | ||
f9f6a592 AP |
45 | Pins on the device (for linking into audio routes): |
46 | ||
47 | * IN1P | |
48 | * IN1N | |
49 | * IN2P | |
50 | * IN2N | |
51 | * MICBIAS1 | |
52 | * DMIC1 | |
53 | * DMIC2 | |
54 | * DMIC3 | |
55 | * DMIC4 | |
56 | * LOUT1 | |
57 | * LOUT2 | |
58 | * LOUT3 | |
59 | ||
60 | Example: | |
61 | ||
62 | rt5677 { | |
63 | compatible = "realtek,rt5677"; | |
64 | reg = <0x2c>; | |
65 | interrupt-parent = <&gpio>; | |
66 | interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; | |
0e612ff1 AP |
67 | |
68 | gpio-controller; | |
69 | #gpio-cells = <2>; | |
70 | ||
f9f6a592 AP |
71 | realtek,pow-ldo2-gpio = |
72 | <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; | |
6f67c380 | 73 | realtek,in1-differential = "true"; |
40eb90a1 | 74 | realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ |
5e3363ad | 75 | realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */ |
f9f6a592 | 76 | }; |