Commit | Line | Data |
---|---|---|
b0e68674 LJ |
1 | STMicroelectronics Low Power Controller (LPC) - Watchdog |
2 | ======================================================== | |
3 | ||
4 | LPC currently supports Watchdog OR Real Time Clock functionality. | |
5 | ||
6 | [See: ../rtc/rtc-st-lpc.txt for RTC options] | |
7 | ||
8 | Required properties | |
9 | ||
10 | - compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" | |
11 | "st,stih415-lpc" "st,stid127-lpc" | |
12 | - reg : LPC registers base address + size | |
13 | - interrupts : LPC interrupt line number and associated flags | |
14 | - clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) | |
15 | - st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or | |
16 | ST_LPC_MODE_WDT [1]. One (and only one) mode must be | |
17 | selected. | |
18 | ||
19 | Required properties [watchdog mode] | |
20 | ||
21 | - st,syscfg : Phandle to syscfg node used to enable watchdog and configure | |
22 | CPU reset type. | |
23 | - timeout-sec : Watchdog timeout in seconds | |
24 | ||
25 | Optional properties [watchdog mode] | |
26 | ||
27 | - st,warm-reset : If present reset type will be 'warm' - if not it will be cold | |
28 | ||
29 | Example: | |
30 | lpc@fde05000 { | |
31 | compatible = "st,stih407-lpc"; | |
32 | reg = <0xfde05000 0x1000>; | |
33 | clocks = <&clk_s_d3_flexgen CLK_LPC_0>; | |
34 | st,syscfg = <&syscfg_core>; | |
35 | timeout-sec = <120>; | |
36 | st,lpc-mode = <ST_LPC_MODE_WDT>; | |
37 | st,warm-reset; | |
38 | }; |