Commit | Line | Data |
---|---|---|
4453d736 GR |
1 | Kernel driver jc42 |
2 | ================== | |
3 | ||
4 | Supported chips: | |
5 | * Analog Devices ADT7408 | |
4453d736 GR |
6 | Datasheets: |
7 | http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf | |
175c490c | 8 | * Atmel AT30TS00, AT30TS002A/B, AT30TSE004A |
4453d736 | 9 | Datasheets: |
1bd612a2 | 10 | http://www.atmel.com/Images/doc8585.pdf |
175c490c GR |
11 | http://www.atmel.com/Images/doc8711.pdf |
12 | http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf | |
13 | http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf | |
0ea2f1db GR |
14 | * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2, |
15 | TS3001GB2 | |
1bd612a2 | 16 | Datasheets: |
0ea2f1db | 17 | Available from IDT web site |
4453d736 | 18 | * Maxim MAX6604 |
4453d736 GR |
19 | Datasheets: |
20 | http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf | |
d4768280 | 21 | * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843 |
4453d736 | 22 | Datasheets: |
1bd612a2 | 23 | http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf |
4453d736 GR |
24 | http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf |
25 | http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf | |
26 | http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf | |
d4768280 | 27 | http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf |
86dda176 | 28 | * NXP Semiconductors SE97, SE97B, SE98, SE98A |
4453d736 GR |
29 | Datasheets: |
30 | http://www.nxp.com/documents/data_sheet/SE97.pdf | |
31 | http://www.nxp.com/documents/data_sheet/SE97B.pdf | |
4453d736 | 32 | http://www.nxp.com/documents/data_sheet/SE98.pdf |
86dda176 | 33 | http://www.nxp.com/documents/data_sheet/SE98A.pdf |
4453d736 | 34 | * ON Semiconductor CAT34TS02, CAT6095 |
4453d736 GR |
35 | Datasheet: |
36 | http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF | |
37 | http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF | |
175c490c | 38 | * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000 |
4de86126 | 39 | Datasheets: |
175c490c GR |
40 | http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf |
41 | http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf | |
42 | http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf | |
43 | http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf | |
44 | http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf | |
4453d736 | 45 | * JEDEC JC 42.4 compliant temperature sensor chips |
d5622f5b CL |
46 | Datasheet: |
47 | http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf | |
4453d736 | 48 | |
86dda176 GR |
49 | Common for all chips: |
50 | Prefix: 'jc42' | |
51 | Addresses scanned: I2C 0x18 - 0x1f | |
52 | ||
4453d736 | 53 | Author: |
e3333e57 | 54 | Guenter Roeck <linux@roeck-us.net> |
4453d736 GR |
55 | |
56 | ||
57 | Description | |
58 | ----------- | |
59 | ||
d5622f5b CL |
60 | This driver implements support for JEDEC JC 42.4 compliant temperature sensors, |
61 | which are used on many DDR3 memory modules for mobile devices and servers. Some | |
62 | systems use the sensor to prevent memory overheating by automatically throttling | |
63 | the memory controller. | |
64 | ||
4453d736 GR |
65 | The driver auto-detects the chips listed above, but can be manually instantiated |
66 | to support other JC 42.4 compliant chips. | |
67 | ||
68 | Example: the following will load the driver for a generic JC 42.4 compliant | |
69 | temperature sensor at address 0x18 on I2C bus #1: | |
70 | ||
71 | # modprobe jc42 | |
72 | # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device | |
73 | ||
74 | A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum, | |
75 | and critical temperature can be configured. There are alarms for high, low, | |
76 | and critical thresholds. | |
77 | ||
78 | There is also an hysteresis to control the thresholds for resetting alarms. | |
79 | Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5, | |
80 | 3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those | |
81 | limits. The chip supports only a single register to configure the hysteresis, | |
82 | which applies to all limits. This register can be written by writing into | |
83 | temp1_crit_hyst. Other hysteresis attributes are read-only. | |
84 | ||
2c6315da CL |
85 | If the BIOS has configured the sensor for automatic temperature management, it |
86 | is likely that it has locked the registers, i.e., that the temperature limits | |
87 | cannot be changed. | |
88 | ||
4453d736 GR |
89 | Sysfs entries |
90 | ------------- | |
91 | ||
92 | temp1_input Temperature (RO) | |
2c6315da CL |
93 | temp1_min Minimum temperature (RO or RW) |
94 | temp1_max Maximum temperature (RO or RW) | |
95 | temp1_crit Critical high temperature (RO or RW) | |
4453d736 | 96 | |
2c6315da | 97 | temp1_crit_hyst Critical hysteresis temperature (RO or RW) |
4453d736 GR |
98 | temp1_max_hyst Maximum hysteresis temperature (RO) |
99 | ||
100 | temp1_min_alarm Temperature low alarm | |
101 | temp1_max_alarm Temperature high alarm | |
102 | temp1_crit_alarm Temperature critical alarm |