Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux Kernel Configuration" | |
7 | ||
8 | config ARM | |
9 | bool | |
10 | default y | |
2064c946 | 11 | select HAVE_IDE |
12b824fb | 12 | select RTC_LIB |
75e7153a | 13 | select SYS_SUPPORTS_APM_EMULATION |
42d4b839 | 14 | select HAVE_OPROFILE |
5cbad0eb | 15 | select HAVE_ARCH_KGDB |
3f550096 | 16 | select HAVE_KPROBES if (!XIP_KERNEL) |
9edddaa2 | 17 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
014c257c AS |
18 | select HAVE_FTRACE if (!XIP_KERNEL) |
19 | select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE) | |
1fe53268 | 20 | select HAVE_GENERIC_DMA_COHERENT |
1da177e4 LT |
21 | help |
22 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 23 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 24 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 25 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
26 | Europe. There is an ARM Linux project with a web page at |
27 | <http://www.arm.linux.org.uk/>. | |
28 | ||
1a189b97 RK |
29 | config HAVE_PWM |
30 | bool | |
31 | ||
75e7153a RB |
32 | config SYS_SUPPORTS_APM_EMULATION |
33 | bool | |
34 | ||
0a938b97 DB |
35 | config GENERIC_GPIO |
36 | bool | |
37 | default n | |
38 | ||
746140c7 KH |
39 | config GENERIC_TIME |
40 | bool | |
41 | default n | |
42 | ||
0567a0c0 KH |
43 | config GENERIC_CLOCKEVENTS |
44 | bool | |
45 | default n | |
46 | ||
a8655e83 CM |
47 | config GENERIC_CLOCKEVENTS_BROADCAST |
48 | bool | |
49 | depends on GENERIC_CLOCKEVENTS | |
50 | default y if SMP && !LOCAL_TIMERS | |
51 | ||
1da177e4 LT |
52 | config MMU |
53 | bool | |
54 | default y | |
55 | ||
5ea81769 AV |
56 | config NO_IOPORT |
57 | bool | |
58 | default n | |
59 | ||
1da177e4 LT |
60 | config EISA |
61 | bool | |
62 | ---help--- | |
63 | The Extended Industry Standard Architecture (EISA) bus was | |
64 | developed as an open alternative to the IBM MicroChannel bus. | |
65 | ||
66 | The EISA bus provided some of the features of the IBM MicroChannel | |
67 | bus while maintaining backward compatibility with cards made for | |
68 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
69 | 1995 when it was made obsolete by the PCI bus. | |
70 | ||
71 | Say Y here if you are building a kernel for an EISA-based machine. | |
72 | ||
73 | Otherwise, say N. | |
74 | ||
75 | config SBUS | |
76 | bool | |
77 | ||
78 | config MCA | |
79 | bool | |
80 | help | |
81 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
82 | laptops. It is a bus system similar to PCI or ISA. See | |
83 | <file:Documentation/mca.txt> (and especially the web page given | |
84 | there) before attempting to build an MCA bus kernel. | |
85 | ||
4a2581a0 TG |
86 | config GENERIC_HARDIRQS |
87 | bool | |
88 | default y | |
89 | ||
f16fb1ec RK |
90 | config STACKTRACE_SUPPORT |
91 | bool | |
92 | default y | |
93 | ||
f76e9154 NP |
94 | config HAVE_LATENCYTOP_SUPPORT |
95 | bool | |
96 | depends on !SMP | |
97 | default y | |
98 | ||
f16fb1ec RK |
99 | config LOCKDEP_SUPPORT |
100 | bool | |
101 | default y | |
102 | ||
7ad1bcb2 RK |
103 | config TRACE_IRQFLAGS_SUPPORT |
104 | bool | |
105 | default y | |
106 | ||
4a2581a0 TG |
107 | config HARDIRQS_SW_RESEND |
108 | bool | |
109 | default y | |
110 | ||
111 | config GENERIC_IRQ_PROBE | |
112 | bool | |
113 | default y | |
114 | ||
95c354fe NP |
115 | config GENERIC_LOCKBREAK |
116 | bool | |
117 | default y | |
118 | depends on SMP && PREEMPT | |
119 | ||
1da177e4 LT |
120 | config RWSEM_GENERIC_SPINLOCK |
121 | bool | |
122 | default y | |
123 | ||
124 | config RWSEM_XCHGADD_ALGORITHM | |
125 | bool | |
126 | ||
f0d1b0b3 DH |
127 | config ARCH_HAS_ILOG2_U32 |
128 | bool | |
129 | default n | |
130 | ||
131 | config ARCH_HAS_ILOG2_U64 | |
132 | bool | |
133 | default n | |
134 | ||
b89c3b16 AM |
135 | config GENERIC_HWEIGHT |
136 | bool | |
137 | default y | |
138 | ||
1da177e4 LT |
139 | config GENERIC_CALIBRATE_DELAY |
140 | bool | |
141 | default y | |
142 | ||
b0b933c0 DH |
143 | config ARCH_SUPPORTS_AOUT |
144 | def_bool y | |
145 | ||
a08b6b79 Z |
146 | config ARCH_MAY_HAVE_PC_FDC |
147 | bool | |
148 | ||
5ac6da66 CL |
149 | config ZONE_DMA |
150 | bool | |
151 | default y | |
152 | ||
1da177e4 LT |
153 | config GENERIC_ISA_DMA |
154 | bool | |
155 | ||
1da177e4 LT |
156 | config FIQ |
157 | bool | |
158 | ||
034d2f5a AV |
159 | config ARCH_MTD_XIP |
160 | bool | |
161 | ||
60a752ef PZ |
162 | config GENERIC_HARDIRQS_NO__DO_IRQ |
163 | bool | |
164 | def_bool y | |
165 | ||
c0ffa3a9 MD |
166 | if OPROFILE |
167 | ||
168 | config OPROFILE_ARMV6 | |
169 | def_bool y | |
170 | depends on CPU_V6 && !SMP | |
171 | select OPROFILE_ARM11_CORE | |
172 | ||
173 | config OPROFILE_MPCORE | |
174 | def_bool y | |
175 | depends on CPU_V6 && SMP | |
176 | select OPROFILE_ARM11_CORE | |
177 | ||
178 | config OPROFILE_ARM11_CORE | |
179 | bool | |
180 | ||
181 | endif | |
182 | ||
c760fc19 HC |
183 | config VECTORS_BASE |
184 | hex | |
6afd6fae | 185 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
186 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
187 | default 0x00000000 | |
188 | help | |
189 | The base address of exception vectors. | |
190 | ||
1da177e4 LT |
191 | source "init/Kconfig" |
192 | ||
193 | menu "System Type" | |
194 | ||
195 | choice | |
196 | prompt "ARM system type" | |
6a0e2430 | 197 | default ARCH_VERSATILE |
1da177e4 | 198 | |
4af6fee1 DS |
199 | config ARCH_AAEC2000 |
200 | bool "Agilent AAEC-2000 based" | |
201 | select ARM_AMBA | |
9483a578 | 202 | select HAVE_CLK |
4af6fee1 DS |
203 | help |
204 | This enables support for systems based on the Agilent AAEC-2000 | |
205 | ||
206 | config ARCH_INTEGRATOR | |
207 | bool "ARM Ltd. Integrator family" | |
208 | select ARM_AMBA | |
9483a578 | 209 | select HAVE_CLK |
4af6fee1 DS |
210 | select ICST525 |
211 | help | |
212 | Support for ARM's Integrator platform. | |
213 | ||
214 | config ARCH_REALVIEW | |
215 | bool "ARM Ltd. RealView family" | |
216 | select ARM_AMBA | |
9483a578 | 217 | select HAVE_CLK |
4af6fee1 | 218 | select ICST307 |
85802afe | 219 | select GENERIC_TIME |
ae30ceac | 220 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
221 | help |
222 | This enables support for ARM Ltd RealView boards. | |
223 | ||
224 | config ARCH_VERSATILE | |
225 | bool "ARM Ltd. Versatile family" | |
226 | select ARM_AMBA | |
227 | select ARM_VIC | |
9483a578 | 228 | select HAVE_CLK |
4af6fee1 | 229 | select ICST307 |
b49c87c2 | 230 | select GENERIC_TIME |
89df1272 | 231 | select GENERIC_CLOCKEVENTS |
4af6fee1 DS |
232 | help |
233 | This enables support for ARM Ltd Versatile board. | |
234 | ||
8fc5ffa0 AV |
235 | config ARCH_AT91 |
236 | bool "Atmel AT91" | |
0a938b97 | 237 | select GENERIC_GPIO |
93686ae8 | 238 | select HAVE_CLK |
4af6fee1 | 239 | help |
2b3b3516 AV |
240 | This enables support for systems based on the Atmel AT91RM9200, |
241 | AT91SAM9 and AT91CAP9 processors. | |
4af6fee1 | 242 | |
1da177e4 | 243 | config ARCH_CLPS7500 |
4af6fee1 | 244 | bool "Cirrus CL-PS7500FE" |
1da177e4 | 245 | select TIMER_ACORN |
f7e68bbf | 246 | select ISA |
e4169889 | 247 | select NO_IOPORT |
f999b8bd MM |
248 | help |
249 | Support for the Cirrus Logic PS7500FE system-on-a-chip. | |
1da177e4 LT |
250 | |
251 | config ARCH_CLPS711X | |
4af6fee1 | 252 | bool "Cirrus Logic CLPS711x/EP721x-based" |
f999b8bd MM |
253 | help |
254 | Support for Cirrus Logic 711x/721x based boards. | |
1da177e4 | 255 | |
1da177e4 LT |
256 | config ARCH_EBSA110 |
257 | bool "EBSA-110" | |
f7e68bbf | 258 | select ISA |
c5eb2a2b | 259 | select NO_IOPORT |
1da177e4 LT |
260 | help |
261 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 262 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
263 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
264 | parallel port. | |
265 | ||
e7736d47 LB |
266 | config ARCH_EP93XX |
267 | bool "EP93xx-based" | |
268 | select ARM_AMBA | |
269 | select ARM_VIC | |
4e9f9fd5 | 270 | select GENERIC_GPIO |
9483a578 | 271 | select HAVE_CLK |
7444a72e | 272 | select ARCH_REQUIRE_GPIOLIB |
e7736d47 LB |
273 | help |
274 | This enables support for the Cirrus EP93xx series of CPUs. | |
275 | ||
1da177e4 LT |
276 | config ARCH_FOOTBRIDGE |
277 | bool "FootBridge" | |
278 | select FOOTBRIDGE | |
f999b8bd MM |
279 | help |
280 | Support for systems based on the DC21285 companion chip | |
281 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 282 | |
4af6fee1 DS |
283 | config ARCH_NETX |
284 | bool "Hilscher NetX based" | |
285 | select ARM_VIC | |
f999b8bd | 286 | help |
4af6fee1 DS |
287 | This enables support for systems based on the Hilscher NetX Soc |
288 | ||
289 | config ARCH_H720X | |
290 | bool "Hynix HMS720x-based" | |
291 | select ISA_DMA_API | |
292 | help | |
293 | This enables support for systems based on the Hynix HMS720x | |
294 | ||
295 | config ARCH_IMX | |
296 | bool "IMX" | |
b3e6a508 | 297 | select GENERIC_GPIO |
89bba435 PP |
298 | select GENERIC_TIME |
299 | select GENERIC_CLOCKEVENTS | |
4af6fee1 DS |
300 | help |
301 | Support for Motorola's i.MX family of processors (MX1, MXL). | |
1da177e4 | 302 | |
3b938be6 RK |
303 | config ARCH_IOP13XX |
304 | bool "IOP13xx-based" | |
305 | depends on MMU | |
306 | select PLAT_IOP | |
307 | select PCI | |
308 | select ARCH_SUPPORTS_MSI | |
309 | help | |
310 | Support for Intel's IOP13XX (XScale) family of processors. | |
311 | ||
3f7e5815 LB |
312 | config ARCH_IOP32X |
313 | bool "IOP32x-based" | |
a4f7e763 | 314 | depends on MMU |
7ae1f7ec | 315 | select PLAT_IOP |
f7e68bbf | 316 | select PCI |
63f385cd | 317 | select GENERIC_GPIO |
bb2b180c | 318 | select ARCH_REQUIRE_GPIOLIB |
f999b8bd | 319 | help |
3f7e5815 LB |
320 | Support for Intel's 80219 and IOP32X (XScale) family of |
321 | processors. | |
322 | ||
323 | config ARCH_IOP33X | |
324 | bool "IOP33x-based" | |
325 | depends on MMU | |
7ae1f7ec | 326 | select PLAT_IOP |
3f7e5815 | 327 | select PCI |
63f385cd | 328 | select GENERIC_GPIO |
bb2b180c | 329 | select ARCH_REQUIRE_GPIOLIB |
3f7e5815 LB |
330 | help |
331 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 332 | |
3b938be6 RK |
333 | config ARCH_IXP23XX |
334 | bool "IXP23XX-based" | |
a4f7e763 | 335 | depends on MMU |
3b938be6 | 336 | select PCI |
f999b8bd | 337 | help |
3b938be6 | 338 | Support for Intel's IXP23xx (XScale) family of processors. |
1da177e4 LT |
339 | |
340 | config ARCH_IXP2000 | |
341 | bool "IXP2400/2800-based" | |
a4f7e763 | 342 | depends on MMU |
f7e68bbf | 343 | select PCI |
f999b8bd MM |
344 | help |
345 | Support for Intel's IXP2400/2800 (XScale) family of processors. | |
1da177e4 | 346 | |
3b938be6 RK |
347 | config ARCH_IXP4XX |
348 | bool "IXP4xx-based" | |
a4f7e763 | 349 | depends on MMU |
8858e9af | 350 | select GENERIC_GPIO |
3b938be6 RK |
351 | select GENERIC_TIME |
352 | select GENERIC_CLOCKEVENTS | |
c4713074 | 353 | help |
3b938be6 | 354 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 355 | |
1da177e4 LT |
356 | config ARCH_L7200 |
357 | bool "LinkUp-L7200" | |
358 | select FIQ | |
359 | help | |
360 | Say Y here if you intend to run this kernel on a LinkUp Systems | |
361 | L7200 Software Development Board which uses an ARM720T processor. | |
362 | Information on this board can be obtained at: | |
363 | ||
364 | <http://www.linkupsys.com/> | |
365 | ||
366 | If you have any questions or comments about the Linux kernel port | |
367 | to this board, send e-mail to <sjhill@cotw.com>. | |
368 | ||
651c74c7 SB |
369 | config ARCH_KIRKWOOD |
370 | bool "Marvell Kirkwood" | |
371 | select PCI | |
372 | select GENERIC_TIME | |
373 | select GENERIC_CLOCKEVENTS | |
374 | select PLAT_ORION | |
375 | help | |
376 | Support for the following Marvell Kirkwood series SoCs: | |
377 | 88F6180, 88F6192 and 88F6281. | |
378 | ||
c53c9cf6 AV |
379 | config ARCH_KS8695 |
380 | bool "Micrel/Kendin KS8695" | |
8a87a996 | 381 | select GENERIC_GPIO |
c53c9cf6 AV |
382 | help |
383 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
384 | System-on-Chip devices. | |
385 | ||
9918cda5 UKK |
386 | config ARCH_NS9XXX |
387 | bool "NetSilicon NS9xxx" | |
689f2a01 | 388 | select GENERIC_GPIO |
cef5975d | 389 | select GENERIC_TIME |
c0bb87f7 | 390 | select GENERIC_CLOCKEVENTS |
9483a578 | 391 | select HAVE_CLK |
9918cda5 UKK |
392 | help |
393 | Say Y here if you intend to run this kernel on a NetSilicon NS9xxx | |
394 | System. | |
395 | ||
396 | <http://www.digi.com/products/microprocessors/index.jsp> | |
397 | ||
777f9beb LB |
398 | config ARCH_LOKI |
399 | bool "Marvell Loki (88RC8480)" | |
400 | select GENERIC_TIME | |
401 | select GENERIC_CLOCKEVENTS | |
402 | select PLAT_ORION | |
403 | help | |
404 | Support for the Marvell Loki (88RC8480) SoC. | |
405 | ||
794d15b2 SS |
406 | config ARCH_MV78XX0 |
407 | bool "Marvell MV78xx0" | |
408 | select PCI | |
409 | select GENERIC_TIME | |
410 | select GENERIC_CLOCKEVENTS | |
411 | select PLAT_ORION | |
412 | help | |
413 | Support for the following Marvell MV78xx0 series SoCs: | |
414 | MV781x0, MV782x0. | |
415 | ||
52c543f9 QJ |
416 | config ARCH_MXC |
417 | bool "Freescale MXC/iMX-based" | |
d0f349fb JB |
418 | select GENERIC_TIME |
419 | select GENERIC_CLOCKEVENTS | |
52c543f9 | 420 | select ARCH_MTD_XIP |
07bd1a6c | 421 | select GENERIC_GPIO |
bb2b180c | 422 | select ARCH_REQUIRE_GPIOLIB |
52c543f9 QJ |
423 | help |
424 | Support for Freescale MXC/iMX-based family of processors | |
425 | ||
9dd0b194 | 426 | config ARCH_ORION5X |
585cf175 TP |
427 | bool "Marvell Orion" |
428 | depends on MMU | |
038ee083 | 429 | select PCI |
01af72e4 | 430 | select GENERIC_GPIO |
51cbff1d TP |
431 | select GENERIC_TIME |
432 | select GENERIC_CLOCKEVENTS | |
69b02f6a | 433 | select PLAT_ORION |
585cf175 | 434 | help |
9dd0b194 | 435 | Support for the following Marvell Orion 5x series SoCs: |
d2b2a6bb LB |
436 | Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
437 | Orion-2 (5281). | |
585cf175 | 438 | |
4af6fee1 DS |
439 | config ARCH_PNX4008 |
440 | bool "Philips Nexperia PNX4008 Mobile" | |
9483a578 | 441 | select HAVE_CLK |
4af6fee1 DS |
442 | help |
443 | This enables support for Philips PNX4008 mobile platform. | |
444 | ||
1da177e4 | 445 | config ARCH_PXA |
2c8086a5 | 446 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 447 | depends on MMU |
034d2f5a | 448 | select ARCH_MTD_XIP |
0a938b97 | 449 | select GENERIC_GPIO |
9483a578 | 450 | select HAVE_CLK |
7444a72e | 451 | select ARCH_REQUIRE_GPIOLIB |
45cf5eef | 452 | select GENERIC_TIME |
981d0f39 | 453 | select GENERIC_CLOCKEVENTS |
a88264c2 | 454 | select TICK_ONESHOT |
f999b8bd | 455 | help |
2c8086a5 | 456 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 LT |
457 | |
458 | config ARCH_RPC | |
459 | bool "RiscPC" | |
460 | select ARCH_ACORN | |
461 | select FIQ | |
462 | select TIMER_ACORN | |
a08b6b79 | 463 | select ARCH_MAY_HAVE_PC_FDC |
341eb781 | 464 | select HAVE_PATA_PLATFORM |
065909b9 | 465 | select ISA_DMA_API |
5ea81769 | 466 | select NO_IOPORT |
1da177e4 LT |
467 | help |
468 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
469 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
470 | ||
471 | config ARCH_SA1100 | |
472 | bool "SA1100-based" | |
f7e68bbf | 473 | select ISA |
3cd9e19e | 474 | select ARCH_DISCONTIGMEM_ENABLE |
05944d74 RK |
475 | select ARCH_SPARSEMEM_ENABLE |
476 | select ARCH_SELECT_MEMORY_MODEL | |
034d2f5a | 477 | select ARCH_MTD_XIP |
0a938b97 | 478 | select GENERIC_GPIO |
d142b6e7 | 479 | select GENERIC_TIME |
3e238be2 | 480 | select GENERIC_CLOCKEVENTS |
9483a578 | 481 | select HAVE_CLK |
3e238be2 | 482 | select TICK_ONESHOT |
7444a72e | 483 | select ARCH_REQUIRE_GPIOLIB |
f999b8bd MM |
484 | help |
485 | Support for StrongARM 11x0 based boards. | |
1da177e4 LT |
486 | |
487 | config ARCH_S3C2410 | |
e4d06e39 | 488 | bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" |
0a938b97 | 489 | select GENERIC_GPIO |
9483a578 | 490 | select HAVE_CLK |
1da177e4 LT |
491 | help |
492 | Samsung S3C2410X CPU based systems, such as the Simtec Electronics | |
493 | BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or | |
f6c8965a | 494 | the Samsung SMDK2410 development board (and derivatives). |
1da177e4 LT |
495 | |
496 | config ARCH_SHARK | |
497 | bool "Shark" | |
f7e68bbf RK |
498 | select ISA |
499 | select ISA_DMA | |
500 | select PCI | |
f999b8bd MM |
501 | help |
502 | Support for the StrongARM based Digital DNARD machine, also known | |
503 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 LT |
504 | |
505 | config ARCH_LH7A40X | |
506 | bool "Sharp LH7A40X" | |
507 | help | |
508 | Say Y here for systems based on one of the Sharp LH7A40X | |
509 | System on a Chip processors. These CPUs include an ARM922T | |
510 | core with a wide array of integrated devices for | |
511 | hand-held and low-power applications. | |
512 | ||
7c6337e2 KH |
513 | config ARCH_DAVINCI |
514 | bool "TI DaVinci" | |
515 | select GENERIC_TIME | |
516 | select GENERIC_CLOCKEVENTS | |
3d9edf09 | 517 | select GENERIC_GPIO |
9483a578 | 518 | select HAVE_CLK |
7c6337e2 KH |
519 | help |
520 | Support for TI's DaVinci platform. | |
521 | ||
3b938be6 RK |
522 | config ARCH_OMAP |
523 | bool "TI OMAP" | |
524 | select GENERIC_GPIO | |
9483a578 | 525 | select HAVE_CLK |
7444a72e | 526 | select ARCH_REQUIRE_GPIOLIB |
3b938be6 | 527 | select GENERIC_TIME |
06cad098 | 528 | select GENERIC_CLOCKEVENTS |
3b938be6 RK |
529 | help |
530 | Support for TI's OMAP platform (OMAP1 and OMAP2). | |
531 | ||
3042102a BS |
532 | config ARCH_MSM7X00A |
533 | bool "Qualcomm MSM7X00A" | |
534 | select GENERIC_TIME | |
535 | select GENERIC_CLOCKEVENTS | |
536 | help | |
537 | Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 | |
538 | apps processor of the MSM7X00A and depends on a shared memory | |
539 | interface to the ARM9 modem processor which runs the baseband stack | |
540 | and controls some vital subsystems (clock and power control, etc). | |
541 | <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> | |
542 | ||
1da177e4 LT |
543 | endchoice |
544 | ||
545 | source "arch/arm/mach-clps711x/Kconfig" | |
546 | ||
e7736d47 LB |
547 | source "arch/arm/mach-ep93xx/Kconfig" |
548 | ||
1da177e4 LT |
549 | source "arch/arm/mach-footbridge/Kconfig" |
550 | ||
551 | source "arch/arm/mach-integrator/Kconfig" | |
552 | ||
3f7e5815 LB |
553 | source "arch/arm/mach-iop32x/Kconfig" |
554 | ||
555 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 556 | |
285f5fa7 DW |
557 | source "arch/arm/mach-iop13xx/Kconfig" |
558 | ||
1da177e4 LT |
559 | source "arch/arm/mach-ixp4xx/Kconfig" |
560 | ||
561 | source "arch/arm/mach-ixp2000/Kconfig" | |
562 | ||
c4713074 LB |
563 | source "arch/arm/mach-ixp23xx/Kconfig" |
564 | ||
777f9beb LB |
565 | source "arch/arm/mach-loki/Kconfig" |
566 | ||
794d15b2 SS |
567 | source "arch/arm/mach-mv78xx0/Kconfig" |
568 | ||
1da177e4 LT |
569 | source "arch/arm/mach-pxa/Kconfig" |
570 | ||
571 | source "arch/arm/mach-sa1100/Kconfig" | |
572 | ||
d48af15e TL |
573 | source "arch/arm/plat-omap/Kconfig" |
574 | ||
575 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 576 | |
1dbae815 TL |
577 | source "arch/arm/mach-omap2/Kconfig" |
578 | ||
9dd0b194 | 579 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 580 | |
651c74c7 | 581 | source "arch/arm/mach-kirkwood/Kconfig" |
585cf175 | 582 | |
a21765a7 | 583 | source "arch/arm/plat-s3c24xx/Kconfig" |
d58153d8 | 584 | source "arch/arm/plat-s3c/Kconfig" |
a21765a7 BD |
585 | |
586 | if ARCH_S3C2410 | |
587 | source "arch/arm/mach-s3c2400/Kconfig" | |
1da177e4 | 588 | source "arch/arm/mach-s3c2410/Kconfig" |
a21765a7 BD |
589 | source "arch/arm/mach-s3c2412/Kconfig" |
590 | source "arch/arm/mach-s3c2440/Kconfig" | |
591 | source "arch/arm/mach-s3c2442/Kconfig" | |
e4d06e39 | 592 | source "arch/arm/mach-s3c2443/Kconfig" |
a21765a7 | 593 | endif |
1da177e4 LT |
594 | |
595 | source "arch/arm/mach-lh7a40x/Kconfig" | |
596 | ||
597 | source "arch/arm/mach-imx/Kconfig" | |
598 | ||
599 | source "arch/arm/mach-h720x/Kconfig" | |
600 | ||
601 | source "arch/arm/mach-versatile/Kconfig" | |
602 | ||
038c5b60 BN |
603 | source "arch/arm/mach-aaec2000/Kconfig" |
604 | ||
8ad68bbf CM |
605 | source "arch/arm/mach-realview/Kconfig" |
606 | ||
9d041268 | 607 | source "arch/arm/mach-at91/Kconfig" |
73a59c1c | 608 | |
52c543f9 QJ |
609 | source "arch/arm/plat-mxc/Kconfig" |
610 | ||
bb6d8c88 SH |
611 | source "arch/arm/mach-netx/Kconfig" |
612 | ||
9918cda5 UKK |
613 | source "arch/arm/mach-ns9xxx/Kconfig" |
614 | ||
7c6337e2 KH |
615 | source "arch/arm/mach-davinci/Kconfig" |
616 | ||
c53c9cf6 AV |
617 | source "arch/arm/mach-ks8695/Kconfig" |
618 | ||
9e73c84c BS |
619 | source "arch/arm/mach-msm/Kconfig" |
620 | ||
1da177e4 LT |
621 | # Definitions to make life easier |
622 | config ARCH_ACORN | |
623 | bool | |
624 | ||
7ae1f7ec LB |
625 | config PLAT_IOP |
626 | bool | |
627 | ||
69b02f6a LB |
628 | config PLAT_ORION |
629 | bool | |
630 | ||
1da177e4 LT |
631 | source arch/arm/mm/Kconfig |
632 | ||
afe4b25e LB |
633 | config IWMMXT |
634 | bool "Enable iWMMXt support" | |
6340aa61 | 635 | depends on CPU_XSCALE || CPU_XSC3 |
2c8086a5 | 636 | default y if PXA27x || PXA3xx |
afe4b25e LB |
637 | help |
638 | Enable support for iWMMXt context switching at run time if | |
639 | running on a CPU that supports it. | |
640 | ||
1da177e4 LT |
641 | # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER |
642 | config XSCALE_PMU | |
643 | bool | |
644 | depends on CPU_XSCALE && !XSCALE_PMU_TIMER | |
645 | default y | |
646 | ||
3b93e7b0 HC |
647 | if !MMU |
648 | source "arch/arm/Kconfig-nommu" | |
649 | endif | |
650 | ||
1da177e4 LT |
651 | endmenu |
652 | ||
653 | source "arch/arm/common/Kconfig" | |
654 | ||
655 | config FORCE_MAX_ZONEORDER | |
656 | int | |
657 | depends on SA1111 | |
658 | default "9" | |
659 | ||
660 | menu "Bus support" | |
661 | ||
662 | config ARM_AMBA | |
663 | bool | |
664 | ||
665 | config ISA | |
666 | bool | |
1da177e4 LT |
667 | help |
668 | Find out whether you have ISA slots on your motherboard. ISA is the | |
669 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
670 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
671 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
672 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
673 | ||
065909b9 | 674 | # Select ISA DMA controller support |
1da177e4 LT |
675 | config ISA_DMA |
676 | bool | |
065909b9 | 677 | select ISA_DMA_API |
1da177e4 | 678 | |
065909b9 | 679 | # Select ISA DMA interface |
5cae841b AV |
680 | config ISA_DMA_API |
681 | bool | |
5cae841b | 682 | |
1da177e4 | 683 | config PCI |
a0113a99 | 684 | bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE |
1da177e4 LT |
685 | help |
686 | Find out whether you have a PCI motherboard. PCI is the name of a | |
687 | bus system, i.e. the way the CPU talks to the other stuff inside | |
688 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
689 | VESA. If you have PCI, say Y, otherwise N. | |
690 | ||
36e23590 MW |
691 | config PCI_SYSCALL |
692 | def_bool PCI | |
693 | ||
1da177e4 LT |
694 | # Select the host bridge type |
695 | config PCI_HOST_VIA82C505 | |
696 | bool | |
697 | depends on PCI && ARCH_SHARK | |
698 | default y | |
699 | ||
a0113a99 MR |
700 | config PCI_HOST_ITE8152 |
701 | bool | |
702 | depends on PCI && MACH_ARMCORE | |
703 | default y | |
704 | select DMABOUNCE | |
705 | ||
1da177e4 LT |
706 | source "drivers/pci/Kconfig" |
707 | ||
708 | source "drivers/pcmcia/Kconfig" | |
709 | ||
710 | endmenu | |
711 | ||
712 | menu "Kernel Features" | |
713 | ||
0567a0c0 KH |
714 | source "kernel/time/Kconfig" |
715 | ||
1da177e4 LT |
716 | config SMP |
717 | bool "Symmetric Multi-Processing (EXPERIMENTAL)" | |
78fdcb42 | 718 | depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) |
f6dd9fa5 | 719 | select USE_GENERIC_SMP_HELPERS |
1da177e4 LT |
720 | help |
721 | This enables support for systems with more than one CPU. If you have | |
722 | a system with only one CPU, like most personal computers, say N. If | |
723 | you have a system with more than one CPU, say Y. | |
724 | ||
725 | If you say N here, the kernel will run on single and multiprocessor | |
726 | machines, but will use only one CPU of a multiprocessor machine. If | |
727 | you say Y here, the kernel will run on many, but not all, single | |
728 | processor machines. On a single processor machine, the kernel will | |
729 | run faster if you say N here. | |
730 | ||
03502faa | 731 | See also <file:Documentation/i386/IO-APIC.txt>, |
1da177e4 LT |
732 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
733 | <http://www.linuxdoc.org/docs.html#howto>. | |
734 | ||
735 | If you don't know what to do here, say N. | |
736 | ||
737 | config NR_CPUS | |
738 | int "Maximum number of CPUs (2-32)" | |
739 | range 2 32 | |
740 | depends on SMP | |
741 | default "4" | |
742 | ||
a054a811 RK |
743 | config HOTPLUG_CPU |
744 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
745 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
746 | help | |
747 | Say Y here to experiment with turning CPUs off and on. CPUs | |
748 | can be controlled through /sys/devices/system/cpu. | |
749 | ||
37ee16ae RK |
750 | config LOCAL_TIMERS |
751 | bool "Use local timer interrupts" | |
78fdcb42 | 752 | depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) |
37ee16ae RK |
753 | default y |
754 | help | |
755 | Enable support for local timers on SMP platforms, rather then the | |
756 | legacy IPI broadcast method. Local timers allows the system | |
757 | accounting to be spread across the timer interval, preventing a | |
758 | "thundering herd" at every timer tick. | |
759 | ||
1da177e4 LT |
760 | config PREEMPT |
761 | bool "Preemptible Kernel (EXPERIMENTAL)" | |
762 | depends on EXPERIMENTAL | |
763 | help | |
764 | This option reduces the latency of the kernel when reacting to | |
765 | real-time or interactive events by allowing a low priority process to | |
766 | be preempted even if it is in kernel mode executing a system call. | |
767 | This allows applications to run more reliably even when the system is | |
768 | under load. | |
769 | ||
770 | Say Y here if you are building a kernel for a desktop, embedded | |
771 | or real-time system. Say N if you are unsure. | |
772 | ||
f8065813 RK |
773 | config HZ |
774 | int | |
775 | default 128 if ARCH_L7200 | |
776 | default 200 if ARCH_EBSA110 || ARCH_S3C2410 | |
bfe65704 | 777 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
5248c657 | 778 | default AT91_TIMER_HZ if ARCH_AT91 |
f8065813 RK |
779 | default 100 |
780 | ||
704bdda0 NP |
781 | config AEABI |
782 | bool "Use the ARM EABI to compile the kernel" | |
783 | help | |
784 | This option allows for the kernel to be compiled using the latest | |
785 | ARM ABI (aka EABI). This is only useful if you are using a user | |
786 | space environment that is also compiled with EABI. | |
787 | ||
788 | Since there are major incompatibilities between the legacy ABI and | |
789 | EABI, especially with regard to structure member alignment, this | |
790 | option also changes the kernel syscall calling convention to | |
791 | disambiguate both ABIs and allow for backward compatibility support | |
792 | (selected with CONFIG_OABI_COMPAT). | |
793 | ||
794 | To use this you need GCC version 4.0.0 or later. | |
795 | ||
6c90c872 | 796 | config OABI_COMPAT |
a73a3ff1 | 797 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
61c484d4 | 798 | depends on AEABI && EXPERIMENTAL |
6c90c872 NP |
799 | default y |
800 | help | |
801 | This option preserves the old syscall interface along with the | |
802 | new (ARM EABI) one. It also provides a compatibility layer to | |
803 | intercept syscalls that have structure arguments which layout | |
804 | in memory differs between the legacy ABI and the new ARM EABI | |
805 | (only for non "thumb" binaries). This option adds a tiny | |
806 | overhead to all syscalls and produces a slightly larger kernel. | |
807 | If you know you'll be using only pure EABI user space then you | |
808 | can say N here. If this option is not selected and you attempt | |
809 | to execute a legacy ABI binary then the result will be | |
810 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
811 | at all). If in doubt say Y. | |
812 | ||
e80d6a24 MG |
813 | config ARCH_FLATMEM_HAS_HOLES |
814 | bool | |
815 | default y | |
816 | depends on FLATMEM | |
817 | ||
3f22ab27 | 818 | config ARCH_DISCONTIGMEM_ENABLE |
1da177e4 | 819 | bool |
f7e68bbf | 820 | default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) |
1da177e4 LT |
821 | help |
822 | Say Y to support efficient handling of discontiguous physical memory, | |
823 | for architectures which are either NUMA (Non-Uniform Memory Access) | |
824 | or have huge holes in the physical address space for other reasons. | |
825 | See <file:Documentation/vm/numa> for more. | |
826 | ||
05944d74 RK |
827 | config ARCH_SPARSEMEM_ENABLE |
828 | bool | |
829 | ||
830 | config ARCH_SELECT_MEMORY_MODEL | |
831 | bool | |
832 | ||
c80d79d7 YG |
833 | config NODES_SHIFT |
834 | int | |
835 | default "4" if ARCH_LH7A40X | |
836 | default "2" | |
837 | depends on NEED_MULTIPLE_NODES | |
838 | ||
3f22ab27 DH |
839 | source "mm/Kconfig" |
840 | ||
1da177e4 LT |
841 | config LEDS |
842 | bool "Timer and CPU usage LEDs" | |
e055d5bf | 843 | depends on ARCH_CDB89712 || ARCH_EBSA110 || \ |
1da177e4 LT |
844 | ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ |
845 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ | |
846 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 847 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
c53c9cf6 | 848 | ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ |
817eb210 | 849 | ARCH_KS8695 || MACH_RD88F5182 |
1da177e4 LT |
850 | help |
851 | If you say Y here, the LEDs on your machine will be used | |
852 | to provide useful information about your current system status. | |
853 | ||
854 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
855 | be able to select which LEDs are active using the options below. If | |
856 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
857 | red LED will simply flash regularly to indicate that the system is | |
858 | still functional. It is safe to say Y here if you have a CATS | |
859 | system, but the driver will do nothing. | |
860 | ||
861 | config LEDS_TIMER | |
862 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
eebdf7d7 DB |
863 | OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ |
864 | || MACH_OMAP_PERSEUS2 | |
1da177e4 | 865 | depends on LEDS |
0567a0c0 | 866 | depends on !GENERIC_CLOCKEVENTS |
1da177e4 LT |
867 | default y if ARCH_EBSA110 |
868 | help | |
869 | If you say Y here, one of the system LEDs (the green one on the | |
870 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
871 | will flash regularly to indicate that the system is still | |
872 | operational. This is mainly useful to kernel hackers who are | |
873 | debugging unstable kernels. | |
874 | ||
875 | The LART uses the same LED for both Timer LED and CPU usage LED | |
876 | functions. You may choose to use both, but the Timer LED function | |
877 | will overrule the CPU usage LED. | |
878 | ||
879 | config LEDS_CPU | |
880 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
eebdf7d7 DB |
881 | !ARCH_OMAP) \ |
882 | || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ | |
883 | || MACH_OMAP_PERSEUS2 | |
1da177e4 LT |
884 | depends on LEDS |
885 | help | |
886 | If you say Y here, the red LED will be used to give a good real | |
887 | time indication of CPU usage, by lighting whenever the idle task | |
888 | is not currently executing. | |
889 | ||
890 | The LART uses the same LED for both Timer LED and CPU usage LED | |
891 | functions. You may choose to use both, but the Timer LED function | |
892 | will overrule the CPU usage LED. | |
893 | ||
894 | config ALIGNMENT_TRAP | |
895 | bool | |
f12d0d7c | 896 | depends on CPU_CP15_MMU |
1da177e4 LT |
897 | default y if !ARCH_EBSA110 |
898 | help | |
84eb8d06 | 899 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
900 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
901 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
902 | fetch/store instructions will be emulated in software if you say | |
903 | here, which has a severe performance impact. This is necessary for | |
904 | correct operation of some network protocols. With an IP-only | |
905 | configuration it is safe to say N, otherwise say Y. | |
906 | ||
907 | endmenu | |
908 | ||
909 | menu "Boot options" | |
910 | ||
911 | # Compressed boot loader in ROM. Yes, we really want to ask about | |
912 | # TEXT and BSS so we preserve their values in the config files. | |
913 | config ZBOOT_ROM_TEXT | |
914 | hex "Compressed ROM boot loader base address" | |
915 | default "0" | |
916 | help | |
917 | The physical address at which the ROM-able zImage is to be | |
918 | placed in the target. Platforms which normally make use of | |
919 | ROM-able zImage formats normally set this to a suitable | |
920 | value in their defconfig file. | |
921 | ||
922 | If ZBOOT_ROM is not enabled, this has no effect. | |
923 | ||
924 | config ZBOOT_ROM_BSS | |
925 | hex "Compressed ROM boot loader BSS address" | |
926 | default "0" | |
927 | help | |
f8c440b2 DF |
928 | The base address of an area of read/write memory in the target |
929 | for the ROM-able zImage which must be available while the | |
930 | decompressor is running. It must be large enough to hold the | |
931 | entire decompressed kernel plus an additional 128 KiB. | |
932 | Platforms which normally make use of ROM-able zImage formats | |
933 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
934 | |
935 | If ZBOOT_ROM is not enabled, this has no effect. | |
936 | ||
937 | config ZBOOT_ROM | |
938 | bool "Compressed boot loader in ROM/flash" | |
939 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
940 | help | |
941 | Say Y here if you intend to execute your compressed kernel image | |
942 | (zImage) directly from ROM or flash. If unsure, say N. | |
943 | ||
944 | config CMDLINE | |
945 | string "Default kernel command string" | |
946 | default "" | |
947 | help | |
948 | On some architectures (EBSA110 and CATS), there is currently no way | |
949 | for the boot loader to pass arguments to the kernel. For these | |
950 | architectures, you should supply some command-line options at build | |
951 | time by entering them here. As a minimum, you should specify the | |
952 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
953 | ||
954 | config XIP_KERNEL | |
955 | bool "Kernel Execute-In-Place from ROM" | |
956 | depends on !ZBOOT_ROM | |
957 | help | |
958 | Execute-In-Place allows the kernel to run from non-volatile storage | |
959 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
960 | space since the text section of the kernel is not loaded from flash | |
961 | to RAM. Read-write sections, such as the data section and stack, | |
962 | are still copied to RAM. The XIP kernel is not compressed since | |
963 | it has to run directly from flash, so it will take more space to | |
964 | store it. The flash address used to link the kernel object files, | |
965 | and for storing it, is configuration dependent. Therefore, if you | |
966 | say Y here, you must know the proper physical address where to | |
967 | store the kernel image depending on your own flash memory usage. | |
968 | ||
969 | Also note that the make target becomes "make xipImage" rather than | |
970 | "make zImage" or "make Image". The final kernel binary to put in | |
971 | ROM memory will be arch/arm/boot/xipImage. | |
972 | ||
973 | If unsure, say N. | |
974 | ||
975 | config XIP_PHYS_ADDR | |
976 | hex "XIP Kernel Physical Location" | |
977 | depends on XIP_KERNEL | |
978 | default "0x00080000" | |
979 | help | |
980 | This is the physical address in your flash memory the kernel will | |
981 | be linked for and stored to. This address is dependent on your | |
982 | own flash usage. | |
983 | ||
c587e4a6 RP |
984 | config KEXEC |
985 | bool "Kexec system call (EXPERIMENTAL)" | |
986 | depends on EXPERIMENTAL | |
987 | help | |
988 | kexec is a system call that implements the ability to shutdown your | |
989 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 990 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
991 | you can start any kernel with it, not just Linux. |
992 | ||
993 | It is an ongoing process to be certain the hardware in a machine | |
994 | is properly shutdown, so do not be surprised if this code does not | |
995 | initially work for you. It may help to enable device hotplugging | |
996 | support. | |
997 | ||
4cd9d6f7 RP |
998 | config ATAGS_PROC |
999 | bool "Export atags in procfs" | |
b98d7291 UL |
1000 | depends on KEXEC |
1001 | default y | |
4cd9d6f7 RP |
1002 | help |
1003 | Should the atags used to boot the kernel be exported in an "atags" | |
1004 | file in procfs. Useful with kexec. | |
1005 | ||
1da177e4 LT |
1006 | endmenu |
1007 | ||
9e2697ff | 1008 | if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) |
1da177e4 LT |
1009 | |
1010 | menu "CPU Frequency scaling" | |
1011 | ||
1012 | source "drivers/cpufreq/Kconfig" | |
1013 | ||
1014 | config CPU_FREQ_SA1100 | |
1015 | bool | |
07c6d48f | 1016 | depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) |
1da177e4 LT |
1017 | default y |
1018 | ||
1019 | config CPU_FREQ_SA1110 | |
1020 | bool | |
1021 | depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) | |
1022 | default y | |
1023 | ||
1024 | config CPU_FREQ_INTEGRATOR | |
1025 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
1026 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
1027 | default y | |
1028 | help | |
1029 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
1030 | ||
1031 | For details, take a look at <file:Documentation/cpu-freq>. | |
1032 | ||
1033 | If in doubt, say Y. | |
1034 | ||
3c8cd0cc PP |
1035 | config CPU_FREQ_IMX |
1036 | tristate "CPUfreq driver for i.MX CPUs" | |
1037 | depends on ARCH_IMX && CPU_FREQ | |
1038 | default n | |
1039 | help | |
1040 | This enables the CPUfreq driver for i.MX CPUs. | |
1041 | ||
1042 | If in doubt, say N. | |
1043 | ||
9e2697ff RK |
1044 | config CPU_FREQ_PXA |
1045 | bool | |
1046 | depends on CPU_FREQ && ARCH_PXA && PXA25x | |
1047 | default y | |
1048 | select CPU_FREQ_DEFAULT_GOV_USERSPACE | |
1049 | ||
1da177e4 LT |
1050 | endmenu |
1051 | ||
1052 | endif | |
1053 | ||
1054 | menu "Floating point emulation" | |
1055 | ||
1056 | comment "At least one emulation must be selected" | |
1057 | ||
1058 | config FPE_NWFPE | |
1059 | bool "NWFPE math emulation" | |
8993a44c | 1060 | depends on !AEABI || OABI_COMPAT |
1da177e4 LT |
1061 | ---help--- |
1062 | Say Y to include the NWFPE floating point emulator in the kernel. | |
1063 | This is necessary to run most binaries. Linux does not currently | |
1064 | support floating point hardware so you need to say Y here even if | |
1065 | your machine has an FPA or floating point co-processor podule. | |
1066 | ||
1067 | You may say N here if you are going to load the Acorn FPEmulator | |
1068 | early in the bootup. | |
1069 | ||
1070 | config FPE_NWFPE_XP | |
1071 | bool "Support extended precision" | |
bedf142b | 1072 | depends on FPE_NWFPE |
1da177e4 LT |
1073 | help |
1074 | Say Y to include 80-bit support in the kernel floating-point | |
1075 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
1076 | Note that gcc does not generate 80-bit operations by default, | |
1077 | so in most cases this option only enlarges the size of the | |
1078 | floating point emulator without any good reason. | |
1079 | ||
1080 | You almost surely want to say N here. | |
1081 | ||
1082 | config FPE_FASTFPE | |
1083 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 1084 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
1085 | ---help--- |
1086 | Say Y here to include the FAST floating point emulator in the kernel. | |
1087 | This is an experimental much faster emulator which now also has full | |
1088 | precision for the mantissa. It does not support any exceptions. | |
1089 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
1090 | ||
1091 | It should be sufficient for most programs. It may be not suitable | |
1092 | for scientific calculations, but you have to check this for yourself. | |
1093 | If you do not feel you need a faster FP emulation you should better | |
1094 | choose NWFPE. | |
1095 | ||
1096 | config VFP | |
1097 | bool "VFP-format floating point maths" | |
c00d4ffd | 1098 | depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
1099 | help |
1100 | Say Y to include VFP support code in the kernel. This is needed | |
1101 | if your hardware includes a VFP unit. | |
1102 | ||
1103 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
1104 | release notes and additional status information. | |
1105 | ||
1106 | Say N if your target does not have VFP hardware. | |
1107 | ||
25ebee02 CM |
1108 | config VFPv3 |
1109 | bool | |
1110 | depends on VFP | |
1111 | default y if CPU_V7 | |
1112 | ||
b5872db4 CM |
1113 | config NEON |
1114 | bool "Advanced SIMD (NEON) Extension support" | |
1115 | depends on VFPv3 && CPU_V7 | |
1116 | help | |
1117 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
1118 | Extension. | |
1119 | ||
1da177e4 LT |
1120 | endmenu |
1121 | ||
1122 | menu "Userspace binary formats" | |
1123 | ||
1124 | source "fs/Kconfig.binfmt" | |
1125 | ||
1126 | config ARTHUR | |
1127 | tristate "RISC OS personality" | |
704bdda0 | 1128 | depends on !AEABI |
1da177e4 LT |
1129 | help |
1130 | Say Y here to include the kernel code necessary if you want to run | |
1131 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
1132 | experimental; if this sounds frightening, say N and sleep in peace. | |
1133 | You can also say M here to compile this support as a module (which | |
1134 | will be called arthur). | |
1135 | ||
1136 | endmenu | |
1137 | ||
1138 | menu "Power management options" | |
1139 | ||
eceab4ac | 1140 | source "kernel/power/Kconfig" |
1da177e4 | 1141 | |
f4cb5700 JB |
1142 | config ARCH_SUSPEND_POSSIBLE |
1143 | def_bool y | |
1144 | ||
1da177e4 LT |
1145 | endmenu |
1146 | ||
d5950b43 SR |
1147 | source "net/Kconfig" |
1148 | ||
1da177e4 LT |
1149 | menu "Device Drivers" |
1150 | ||
1151 | source "drivers/base/Kconfig" | |
1152 | ||
c35bf4a5 PM |
1153 | source "drivers/connector/Kconfig" |
1154 | ||
f12d0d7c | 1155 | if ALIGNMENT_TRAP || !CPU_CP15_MMU |
1da177e4 LT |
1156 | source "drivers/mtd/Kconfig" |
1157 | endif | |
1158 | ||
1159 | source "drivers/parport/Kconfig" | |
1160 | ||
1161 | source "drivers/pnp/Kconfig" | |
1162 | ||
1163 | source "drivers/block/Kconfig" | |
1164 | ||
58273e55 RK |
1165 | # misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 |
1166 | ||
1167 | source "drivers/misc/Kconfig" | |
1168 | ||
1da177e4 | 1169 | source "drivers/ide/Kconfig" |
1da177e4 LT |
1170 | |
1171 | source "drivers/scsi/Kconfig" | |
1172 | ||
eb370f0b MM |
1173 | source "drivers/ata/Kconfig" |
1174 | ||
1da177e4 LT |
1175 | source "drivers/md/Kconfig" |
1176 | ||
1177 | source "drivers/message/fusion/Kconfig" | |
1178 | ||
1179 | source "drivers/ieee1394/Kconfig" | |
1180 | ||
1181 | source "drivers/message/i2o/Kconfig" | |
1182 | ||
d5950b43 | 1183 | source "drivers/net/Kconfig" |
1da177e4 LT |
1184 | |
1185 | source "drivers/isdn/Kconfig" | |
1186 | ||
1187 | # input before char - char/joystick depends on it. As does USB. | |
1188 | ||
1189 | source "drivers/input/Kconfig" | |
1190 | ||
1191 | source "drivers/char/Kconfig" | |
1192 | ||
1193 | source "drivers/i2c/Kconfig" | |
1194 | ||
8ae12a0d DB |
1195 | source "drivers/spi/Kconfig" |
1196 | ||
a9c5fff5 DB |
1197 | source "drivers/gpio/Kconfig" |
1198 | ||
04916c0e AZ |
1199 | source "drivers/w1/Kconfig" |
1200 | ||
58273e55 RK |
1201 | source "drivers/power/Kconfig" |
1202 | ||
ad2f931d JD |
1203 | source "drivers/hwmon/Kconfig" |
1204 | ||
70dfa3f8 RK |
1205 | source "drivers/watchdog/Kconfig" |
1206 | ||
58273e55 | 1207 | source "drivers/ssb/Kconfig" |
1da177e4 | 1208 | |
58273e55 | 1209 | #source "drivers/l3/Kconfig" |
1da177e4 | 1210 | |
a4e137ab RK |
1211 | source "drivers/mfd/Kconfig" |
1212 | ||
1da177e4 LT |
1213 | source "drivers/media/Kconfig" |
1214 | ||
1215 | source "drivers/video/Kconfig" | |
1216 | ||
1217 | source "sound/Kconfig" | |
1218 | ||
c2dade51 SH |
1219 | source "drivers/hid/Kconfig" |
1220 | ||
1da177e4 LT |
1221 | source "drivers/usb/Kconfig" |
1222 | ||
2f86c3e6 GKH |
1223 | source "drivers/uwb/Kconfig" |
1224 | ||
1da177e4 LT |
1225 | source "drivers/mmc/Kconfig" |
1226 | ||
58273e55 RK |
1227 | source "drivers/leds/Kconfig" |
1228 | ||
12b824fb AZ |
1229 | source "drivers/rtc/Kconfig" |
1230 | ||
5816815f DW |
1231 | source "drivers/dma/Kconfig" |
1232 | ||
abf07b19 DW |
1233 | source "drivers/dca/Kconfig" |
1234 | ||
ba7e4763 LG |
1235 | source "drivers/regulator/Kconfig" |
1236 | ||
2dc034a8 HJK |
1237 | source "drivers/uio/Kconfig" |
1238 | ||
1da177e4 LT |
1239 | endmenu |
1240 | ||
1241 | source "fs/Kconfig" | |
1242 | ||
1da177e4 LT |
1243 | source "arch/arm/Kconfig.debug" |
1244 | ||
1245 | source "security/Kconfig" | |
1246 | ||
1247 | source "crypto/Kconfig" | |
1248 | ||
1249 | source "lib/Kconfig" |