Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config ARM |
2 | bool | |
3 | default y | |
7563bbf8 | 4 | select ARCH_HAVE_CUSTOM_GPIO_H |
e17c6d56 | 5 | select HAVE_AOUT |
24056f52 | 6 | select HAVE_DMA_API_DEBUG |
d0ee9f40 | 7 | select HAVE_IDE if PCI || ISA || PCMCIA |
2dc6a016 | 8 | select HAVE_DMA_ATTRS |
e092705b | 9 | select HAVE_DMA_CONTIGUOUS if MMU |
2778f620 | 10 | select HAVE_MEMBLOCK |
12b824fb | 11 | select RTC_LIB |
75e7153a | 12 | select SYS_SUPPORTS_APM_EMULATION |
a41297a0 | 13 | select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) |
7463449b | 14 | select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
fe166148 | 15 | select HAVE_OPROFILE if (HAVE_PERF_EVENTS) |
09f05d85 | 16 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL |
5cbad0eb | 17 | select HAVE_ARCH_KGDB |
0693bf68 | 18 | select HAVE_ARCH_TRACEHOOK |
856bc356 | 19 | select HAVE_KPROBES if !XIP_KERNEL |
9edddaa2 | 20 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
606576ce | 21 | select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) |
80be7a7f RV |
22 | select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) |
23 | select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) | |
0e341af8 | 24 | select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) |
e39f5602 | 25 | select ARCH_BINFMT_ELF_RANDOMIZE_PIE |
1fe53268 | 26 | select HAVE_GENERIC_DMA_COHERENT |
e7db7b42 AT |
27 | select HAVE_KERNEL_GZIP |
28 | select HAVE_KERNEL_LZO | |
6e8699f7 | 29 | select HAVE_KERNEL_LZMA |
a7f464f3 | 30 | select HAVE_KERNEL_XZ |
e360adbe | 31 | select HAVE_IRQ_WORK |
7ada189f JI |
32 | select HAVE_PERF_EVENTS |
33 | select PERF_USE_VMALLOC | |
e513f8bf | 34 | select HAVE_REGS_AND_STACK_ACCESS_API |
e399b1a4 | 35 | select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) |
ed60453f | 36 | select HAVE_C_RECORDMCOUNT |
e2a93ecc | 37 | select HAVE_GENERIC_HARDIRQS |
37e74beb SB |
38 | select HARDIRQS_SW_RESEND |
39 | select GENERIC_IRQ_PROBE | |
25a5662a | 40 | select GENERIC_IRQ_SHOW |
c1d7e01d | 41 | select ARCH_WANT_IPC_PARSE_VERSION |
d4aa8b15 | 42 | select HARDIRQS_SW_RESEND |
1fb90263 | 43 | select CPU_PM if (SUSPEND || CPU_IDLE) |
e5bfb72c | 44 | select GENERIC_PCI_IOMAP |
e47b65b0 | 45 | select HAVE_BPF_JIT |
84ec6d57 | 46 | select GENERIC_SMP_IDLE_THREAD |
3d92a71a AMG |
47 | select KTIME_SCALAR |
48 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP | |
8c56cc8b WD |
49 | select GENERIC_STRNCPY_FROM_USER |
50 | select GENERIC_STRNLEN_USER | |
b9a50f74 | 51 | select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN |
1da177e4 LT |
52 | help |
53 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 54 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 55 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 56 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
57 | Europe. There is an ARM Linux project with a web page at |
58 | <http://www.arm.linux.org.uk/>. | |
59 | ||
74facffe RK |
60 | config ARM_HAS_SG_CHAIN |
61 | bool | |
62 | ||
4ce63fcd MS |
63 | config NEED_SG_DMA_LENGTH |
64 | bool | |
65 | ||
66 | config ARM_DMA_USE_IOMMU | |
67 | select NEED_SG_DMA_LENGTH | |
68 | select ARM_HAS_SG_CHAIN | |
69 | bool | |
70 | ||
1a189b97 RK |
71 | config HAVE_PWM |
72 | bool | |
73 | ||
0b05da72 HUK |
74 | config MIGHT_HAVE_PCI |
75 | bool | |
76 | ||
75e7153a RB |
77 | config SYS_SUPPORTS_APM_EMULATION |
78 | bool | |
79 | ||
0a938b97 DB |
80 | config GENERIC_GPIO |
81 | bool | |
0a938b97 | 82 | |
bc581770 LW |
83 | config HAVE_TCM |
84 | bool | |
85 | select GENERIC_ALLOCATOR | |
86 | ||
e119bfff RK |
87 | config HAVE_PROC_CPU |
88 | bool | |
89 | ||
5ea81769 AV |
90 | config NO_IOPORT |
91 | bool | |
5ea81769 | 92 | |
1da177e4 LT |
93 | config EISA |
94 | bool | |
95 | ---help--- | |
96 | The Extended Industry Standard Architecture (EISA) bus was | |
97 | developed as an open alternative to the IBM MicroChannel bus. | |
98 | ||
99 | The EISA bus provided some of the features of the IBM MicroChannel | |
100 | bus while maintaining backward compatibility with cards made for | |
101 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
102 | 1995 when it was made obsolete by the PCI bus. | |
103 | ||
104 | Say Y here if you are building a kernel for an EISA-based machine. | |
105 | ||
106 | Otherwise, say N. | |
107 | ||
108 | config SBUS | |
109 | bool | |
110 | ||
f16fb1ec RK |
111 | config STACKTRACE_SUPPORT |
112 | bool | |
113 | default y | |
114 | ||
f76e9154 NP |
115 | config HAVE_LATENCYTOP_SUPPORT |
116 | bool | |
117 | depends on !SMP | |
118 | default y | |
119 | ||
f16fb1ec RK |
120 | config LOCKDEP_SUPPORT |
121 | bool | |
122 | default y | |
123 | ||
7ad1bcb2 RK |
124 | config TRACE_IRQFLAGS_SUPPORT |
125 | bool | |
126 | default y | |
127 | ||
1da177e4 LT |
128 | config RWSEM_GENERIC_SPINLOCK |
129 | bool | |
130 | default y | |
131 | ||
132 | config RWSEM_XCHGADD_ALGORITHM | |
133 | bool | |
134 | ||
f0d1b0b3 DH |
135 | config ARCH_HAS_ILOG2_U32 |
136 | bool | |
f0d1b0b3 DH |
137 | |
138 | config ARCH_HAS_ILOG2_U64 | |
139 | bool | |
f0d1b0b3 | 140 | |
89c52ed4 BD |
141 | config ARCH_HAS_CPUFREQ |
142 | bool | |
143 | help | |
144 | Internal node to signify that the ARCH has CPUFREQ support | |
145 | and that the relevant menu configurations are displayed for | |
146 | it. | |
147 | ||
b89c3b16 AM |
148 | config GENERIC_HWEIGHT |
149 | bool | |
150 | default y | |
151 | ||
1da177e4 LT |
152 | config GENERIC_CALIBRATE_DELAY |
153 | bool | |
154 | default y | |
155 | ||
a08b6b79 Z |
156 | config ARCH_MAY_HAVE_PC_FDC |
157 | bool | |
158 | ||
5ac6da66 CL |
159 | config ZONE_DMA |
160 | bool | |
5ac6da66 | 161 | |
ccd7ab7f FT |
162 | config NEED_DMA_MAP_STATE |
163 | def_bool y | |
164 | ||
58af4a24 RH |
165 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
166 | bool | |
167 | ||
1da177e4 LT |
168 | config GENERIC_ISA_DMA |
169 | bool | |
170 | ||
1da177e4 LT |
171 | config FIQ |
172 | bool | |
173 | ||
13a5045d RH |
174 | config NEED_RET_TO_USER |
175 | bool | |
176 | ||
034d2f5a AV |
177 | config ARCH_MTD_XIP |
178 | bool | |
179 | ||
c760fc19 HC |
180 | config VECTORS_BASE |
181 | hex | |
6afd6fae | 182 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
c760fc19 HC |
183 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
184 | default 0x00000000 | |
185 | help | |
186 | The base address of exception vectors. | |
187 | ||
dc21af99 | 188 | config ARM_PATCH_PHYS_VIRT |
c1becedc RK |
189 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
190 | default y | |
b511d75d | 191 | depends on !XIP_KERNEL && MMU |
dc21af99 RK |
192 | depends on !ARCH_REALVIEW || !SPARSEMEM |
193 | help | |
111e9a5c RK |
194 | Patch phys-to-virt and virt-to-phys translation functions at |
195 | boot and module load time according to the position of the | |
196 | kernel in system memory. | |
dc21af99 | 197 | |
111e9a5c | 198 | This can only be used with non-XIP MMU kernels where the base |
daece596 | 199 | of physical memory is at a 16MB boundary. |
dc21af99 | 200 | |
c1becedc RK |
201 | Only disable this option if you know that you do not require |
202 | this feature (eg, building a kernel for a single machine) and | |
203 | you need to shrink the kernel to the minimal size. | |
dc21af99 | 204 | |
c334bc15 RH |
205 | config NEED_MACH_IO_H |
206 | bool | |
207 | help | |
208 | Select this when mach/io.h is required to provide special | |
209 | definitions for this platform. The need for mach/io.h should | |
210 | be avoided when possible. | |
211 | ||
0cdc8b92 | 212 | config NEED_MACH_MEMORY_H |
1b9f95f8 NP |
213 | bool |
214 | help | |
0cdc8b92 NP |
215 | Select this when mach/memory.h is required to provide special |
216 | definitions for this platform. The need for mach/memory.h should | |
217 | be avoided when possible. | |
dc21af99 | 218 | |
1b9f95f8 | 219 | config PHYS_OFFSET |
974c0724 | 220 | hex "Physical address of main memory" if MMU |
0cdc8b92 | 221 | depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H |
974c0724 | 222 | default DRAM_BASE if !MMU |
111e9a5c | 223 | help |
1b9f95f8 NP |
224 | Please provide the physical address corresponding to the |
225 | location of main memory in your system. | |
cada3c08 | 226 | |
87e040b6 SG |
227 | config GENERIC_BUG |
228 | def_bool y | |
229 | depends on BUG | |
230 | ||
1da177e4 LT |
231 | source "init/Kconfig" |
232 | ||
dc52ddc0 MH |
233 | source "kernel/Kconfig.freezer" |
234 | ||
1da177e4 LT |
235 | menu "System Type" |
236 | ||
3c427975 HC |
237 | config MMU |
238 | bool "MMU-based Paged Memory Management Support" | |
239 | default y | |
240 | help | |
241 | Select if you want MMU-based virtualised addressing space | |
242 | support by paged memory management. If unsure, say 'Y'. | |
243 | ||
ccf50e23 RK |
244 | # |
245 | # The "ARM system type" choice list is ordered alphabetically by option | |
246 | # text. Please add new entries in the option alphabetic order. | |
247 | # | |
1da177e4 LT |
248 | choice |
249 | prompt "ARM system type" | |
6a0e2430 | 250 | default ARCH_VERSATILE |
1da177e4 | 251 | |
66314223 DN |
252 | config ARCH_SOCFPGA |
253 | bool "Altera SOCFPGA family" | |
254 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
255 | select ARM_AMBA | |
256 | select ARM_GIC | |
257 | select CACHE_L2X0 | |
258 | select CLKDEV_LOOKUP | |
259 | select COMMON_CLK | |
260 | select CPU_V7 | |
261 | select DW_APB_TIMER | |
262 | select DW_APB_TIMER_OF | |
263 | select GENERIC_CLOCKEVENTS | |
264 | select GPIO_PL061 if GPIOLIB | |
265 | select HAVE_ARM_SCU | |
266 | select SPARSE_IRQ | |
267 | select USE_OF | |
268 | help | |
269 | This enables support for Altera SOCFPGA Cyclone V platform | |
270 | ||
4af6fee1 DS |
271 | config ARCH_INTEGRATOR |
272 | bool "ARM Ltd. Integrator family" | |
273 | select ARM_AMBA | |
89c52ed4 | 274 | select ARCH_HAS_CPUFREQ |
a613163d LW |
275 | select COMMON_CLK |
276 | select CLK_VERSATILE | |
9904f793 | 277 | select HAVE_TCM |
c5a0adb5 | 278 | select ICST |
13edd86d | 279 | select GENERIC_CLOCKEVENTS |
f4b8b319 | 280 | select PLAT_VERSATILE |
c41b16f8 | 281 | select PLAT_VERSATILE_FPGA_IRQ |
c334bc15 | 282 | select NEED_MACH_IO_H |
0cdc8b92 | 283 | select NEED_MACH_MEMORY_H |
695436e3 | 284 | select SPARSE_IRQ |
3108e6ab | 285 | select MULTI_IRQ_HANDLER |
4af6fee1 DS |
286 | help |
287 | Support for ARM's Integrator platform. | |
288 | ||
289 | config ARCH_REALVIEW | |
290 | bool "ARM Ltd. RealView family" | |
291 | select ARM_AMBA | |
6d803ba7 | 292 | select CLKDEV_LOOKUP |
aa3831cf | 293 | select HAVE_MACH_CLKDEV |
c5a0adb5 | 294 | select ICST |
ae30ceac | 295 | select GENERIC_CLOCKEVENTS |
eb7fffa3 | 296 | select ARCH_WANT_OPTIONAL_GPIOLIB |
f4b8b319 | 297 | select PLAT_VERSATILE |
56a34b03 | 298 | select PLAT_VERSATILE_CLOCK |
3cb5ee49 | 299 | select PLAT_VERSATILE_CLCD |
e3887714 | 300 | select ARM_TIMER_SP804 |
b56ba8aa | 301 | select GPIO_PL061 if GPIOLIB |
0cdc8b92 | 302 | select NEED_MACH_MEMORY_H |
4af6fee1 DS |
303 | help |
304 | This enables support for ARM Ltd RealView boards. | |
305 | ||
306 | config ARCH_VERSATILE | |
307 | bool "ARM Ltd. Versatile family" | |
308 | select ARM_AMBA | |
309 | select ARM_VIC | |
6d803ba7 | 310 | select CLKDEV_LOOKUP |
aa3831cf | 311 | select HAVE_MACH_CLKDEV |
c5a0adb5 | 312 | select ICST |
89df1272 | 313 | select GENERIC_CLOCKEVENTS |
bbeddc43 | 314 | select ARCH_WANT_OPTIONAL_GPIOLIB |
9b0f7e39 | 315 | select NEED_MACH_IO_H if PCI |
f4b8b319 | 316 | select PLAT_VERSATILE |
56a34b03 | 317 | select PLAT_VERSATILE_CLOCK |
3414ba8c | 318 | select PLAT_VERSATILE_CLCD |
c41b16f8 | 319 | select PLAT_VERSATILE_FPGA_IRQ |
e3887714 | 320 | select ARM_TIMER_SP804 |
4af6fee1 DS |
321 | help |
322 | This enables support for ARM Ltd Versatile board. | |
323 | ||
ceade897 RK |
324 | config ARCH_VEXPRESS |
325 | bool "ARM Ltd. Versatile Express family" | |
326 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
327 | select ARM_AMBA | |
328 | select ARM_TIMER_SP804 | |
6d803ba7 | 329 | select CLKDEV_LOOKUP |
d1b8a775 | 330 | select COMMON_CLK |
ceade897 | 331 | select GENERIC_CLOCKEVENTS |
ceade897 | 332 | select HAVE_CLK |
95c34f83 | 333 | select HAVE_PATA_PLATFORM |
ceade897 | 334 | select ICST |
ba81f502 | 335 | select NO_IOPORT |
ceade897 | 336 | select PLAT_VERSATILE |
0fb44b91 | 337 | select PLAT_VERSATILE_CLCD |
b2a54ff0 | 338 | select REGULATOR_FIXED_VOLTAGE if REGULATOR |
ceade897 RK |
339 | help |
340 | This enables support for the ARM Ltd Versatile Express boards. | |
341 | ||
8fc5ffa0 AV |
342 | config ARCH_AT91 |
343 | bool "Atmel AT91" | |
f373e8c0 | 344 | select ARCH_REQUIRE_GPIOLIB |
93686ae8 | 345 | select HAVE_CLK |
bd602995 | 346 | select CLKDEV_LOOKUP |
e261501d | 347 | select IRQ_DOMAIN |
1ac02d79 | 348 | select NEED_MACH_IO_H if PCCARD |
4af6fee1 | 349 | help |
929e994f NF |
350 | This enables support for systems based on Atmel |
351 | AT91RM9200 and AT91SAM9* processors. | |
4af6fee1 | 352 | |
ec9653b8 SA |
353 | config ARCH_BCM2835 |
354 | bool "Broadcom BCM2835 family" | |
355 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
356 | select ARM_AMBA | |
357 | select ARM_ERRATA_411920 | |
358 | select ARM_TIMER_SP804 | |
359 | select CLKDEV_LOOKUP | |
360 | select COMMON_CLK | |
361 | select CPU_V6 | |
362 | select GENERIC_CLOCKEVENTS | |
363 | select MULTI_IRQ_HANDLER | |
364 | select SPARSE_IRQ | |
365 | select USE_OF | |
366 | help | |
367 | This enables support for the Broadcom BCM2835 SoC. This SoC is | |
368 | use in the Raspberry Pi, and Roku 2 devices. | |
369 | ||
ccf50e23 RK |
370 | config ARCH_BCMRING |
371 | bool "Broadcom BCMRING" | |
372 | depends on MMU | |
373 | select CPU_V6 | |
374 | select ARM_AMBA | |
82d63734 | 375 | select ARM_TIMER_SP804 |
6d803ba7 | 376 | select CLKDEV_LOOKUP |
ccf50e23 RK |
377 | select GENERIC_CLOCKEVENTS |
378 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
379 | help | |
380 | Support for Broadcom's BCMRing platform. | |
381 | ||
220e6cf7 RH |
382 | config ARCH_HIGHBANK |
383 | bool "Calxeda Highbank-based" | |
384 | select ARCH_WANT_OPTIONAL_GPIOLIB | |
385 | select ARM_AMBA | |
386 | select ARM_GIC | |
387 | select ARM_TIMER_SP804 | |
22d80379 | 388 | select CACHE_L2X0 |
220e6cf7 | 389 | select CLKDEV_LOOKUP |
8d4d9f52 | 390 | select COMMON_CLK |
220e6cf7 RH |
391 | select CPU_V7 |
392 | select GENERIC_CLOCKEVENTS | |
393 | select HAVE_ARM_SCU | |
3b55658a | 394 | select HAVE_SMP |
fdfa64a4 | 395 | select SPARSE_IRQ |
220e6cf7 RH |
396 | select USE_OF |
397 | help | |
398 | Support for the Calxeda Highbank SoC based boards. | |
399 | ||
1da177e4 | 400 | config ARCH_CLPS711X |
0e2fce59 | 401 | bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" |
c750815e | 402 | select CPU_ARM720T |
5cfc8ee0 | 403 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 404 | select NEED_MACH_MEMORY_H |
f999b8bd | 405 | help |
0e2fce59 | 406 | Support for Cirrus Logic 711x/721x/731x based boards. |
1da177e4 | 407 | |
d94f944e AV |
408 | config ARCH_CNS3XXX |
409 | bool "Cavium Networks CNS3XXX family" | |
00d2711d | 410 | select CPU_V6K |
d94f944e AV |
411 | select GENERIC_CLOCKEVENTS |
412 | select ARM_GIC | |
ce5ea9f3 | 413 | select MIGHT_HAVE_CACHE_L2X0 |
0b05da72 | 414 | select MIGHT_HAVE_PCI |
5f32f7a0 | 415 | select PCI_DOMAINS if PCI |
d94f944e AV |
416 | help |
417 | Support for Cavium Networks CNS3XXX platform. | |
418 | ||
788c9700 RK |
419 | config ARCH_GEMINI |
420 | bool "Cortina Systems Gemini" | |
421 | select CPU_FA526 | |
788c9700 | 422 | select ARCH_REQUIRE_GPIOLIB |
5cfc8ee0 | 423 | select ARCH_USES_GETTIMEOFFSET |
788c9700 RK |
424 | help |
425 | Support for the Cortina Systems Gemini family SoCs | |
426 | ||
3a6cb8ce AB |
427 | config ARCH_PRIMA2 |
428 | bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" | |
429 | select CPU_V7 | |
3a6cb8ce | 430 | select NO_IOPORT |
f6387092 | 431 | select ARCH_REQUIRE_GPIOLIB |
3a6cb8ce AB |
432 | select GENERIC_CLOCKEVENTS |
433 | select CLKDEV_LOOKUP | |
434 | select GENERIC_IRQ_CHIP | |
ce5ea9f3 | 435 | select MIGHT_HAVE_CACHE_L2X0 |
cbd8d842 BS |
436 | select PINCTRL |
437 | select PINCTRL_SIRF | |
3a6cb8ce AB |
438 | select USE_OF |
439 | select ZONE_DMA | |
440 | help | |
441 | Support for CSR SiRFSoC ARM Cortex A9 Platform | |
442 | ||
1da177e4 LT |
443 | config ARCH_EBSA110 |
444 | bool "EBSA-110" | |
c750815e | 445 | select CPU_SA110 |
f7e68bbf | 446 | select ISA |
c5eb2a2b | 447 | select NO_IOPORT |
5cfc8ee0 | 448 | select ARCH_USES_GETTIMEOFFSET |
c334bc15 | 449 | select NEED_MACH_IO_H |
0cdc8b92 | 450 | select NEED_MACH_MEMORY_H |
1da177e4 LT |
451 | help |
452 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 453 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
454 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
455 | parallel port. | |
456 | ||
e7736d47 LB |
457 | config ARCH_EP93XX |
458 | bool "EP93xx-based" | |
c750815e | 459 | select CPU_ARM920T |
e7736d47 LB |
460 | select ARM_AMBA |
461 | select ARM_VIC | |
6d803ba7 | 462 | select CLKDEV_LOOKUP |
7444a72e | 463 | select ARCH_REQUIRE_GPIOLIB |
eb33575c | 464 | select ARCH_HAS_HOLES_MEMORYMODEL |
5cfc8ee0 | 465 | select ARCH_USES_GETTIMEOFFSET |
5725aeae | 466 | select NEED_MACH_MEMORY_H |
e7736d47 LB |
467 | help |
468 | This enables support for the Cirrus EP93xx series of CPUs. | |
469 | ||
1da177e4 LT |
470 | config ARCH_FOOTBRIDGE |
471 | bool "FootBridge" | |
c750815e | 472 | select CPU_SA110 |
1da177e4 | 473 | select FOOTBRIDGE |
4e8d7637 | 474 | select GENERIC_CLOCKEVENTS |
d0ee9f40 | 475 | select HAVE_IDE |
c334bc15 | 476 | select NEED_MACH_IO_H |
0cdc8b92 | 477 | select NEED_MACH_MEMORY_H |
f999b8bd MM |
478 | help |
479 | Support for systems based on the DC21285 companion chip | |
480 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 | 481 | |
788c9700 RK |
482 | config ARCH_MXC |
483 | bool "Freescale MXC/iMX-based" | |
788c9700 | 484 | select GENERIC_CLOCKEVENTS |
788c9700 | 485 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 486 | select CLKDEV_LOOKUP |
234b6ced | 487 | select CLKSRC_MMIO |
8b6c44f1 | 488 | select GENERIC_IRQ_CHIP |
ffa2ea3f | 489 | select MULTI_IRQ_HANDLER |
8842a9e2 | 490 | select SPARSE_IRQ |
3e62af82 | 491 | select USE_OF |
788c9700 RK |
492 | help |
493 | Support for Freescale MXC/iMX-based family of processors | |
494 | ||
1d3f33d5 SG |
495 | config ARCH_MXS |
496 | bool "Freescale MXS-based" | |
497 | select GENERIC_CLOCKEVENTS | |
498 | select ARCH_REQUIRE_GPIOLIB | |
b9214b97 | 499 | select CLKDEV_LOOKUP |
5c61ddcf | 500 | select CLKSRC_MMIO |
2664681f | 501 | select COMMON_CLK |
6abda3e1 | 502 | select HAVE_CLK_PREPARE |
a0f5e363 | 503 | select PINCTRL |
6c4d4efb | 504 | select USE_OF |
1d3f33d5 SG |
505 | help |
506 | Support for Freescale MXS-based family of processors | |
507 | ||
4af6fee1 DS |
508 | config ARCH_NETX |
509 | bool "Hilscher NetX based" | |
234b6ced | 510 | select CLKSRC_MMIO |
c750815e | 511 | select CPU_ARM926T |
4af6fee1 | 512 | select ARM_VIC |
2fcfe6b8 | 513 | select GENERIC_CLOCKEVENTS |
f999b8bd | 514 | help |
4af6fee1 DS |
515 | This enables support for systems based on the Hilscher NetX Soc |
516 | ||
517 | config ARCH_H720X | |
518 | bool "Hynix HMS720x-based" | |
c750815e | 519 | select CPU_ARM720T |
4af6fee1 | 520 | select ISA_DMA_API |
5cfc8ee0 | 521 | select ARCH_USES_GETTIMEOFFSET |
4af6fee1 DS |
522 | help |
523 | This enables support for systems based on the Hynix HMS720x | |
524 | ||
3b938be6 RK |
525 | config ARCH_IOP13XX |
526 | bool "IOP13xx-based" | |
527 | depends on MMU | |
c750815e | 528 | select CPU_XSC3 |
3b938be6 RK |
529 | select PLAT_IOP |
530 | select PCI | |
531 | select ARCH_SUPPORTS_MSI | |
8d5796d2 | 532 | select VMSPLIT_1G |
c334bc15 | 533 | select NEED_MACH_IO_H |
0cdc8b92 | 534 | select NEED_MACH_MEMORY_H |
13a5045d | 535 | select NEED_RET_TO_USER |
3b938be6 RK |
536 | help |
537 | Support for Intel's IOP13XX (XScale) family of processors. | |
538 | ||
3f7e5815 LB |
539 | config ARCH_IOP32X |
540 | bool "IOP32x-based" | |
a4f7e763 | 541 | depends on MMU |
c750815e | 542 | select CPU_XSCALE |
c334bc15 | 543 | select NEED_MACH_IO_H |
13a5045d | 544 | select NEED_RET_TO_USER |
7ae1f7ec | 545 | select PLAT_IOP |
f7e68bbf | 546 | select PCI |
bb2b180c | 547 | select ARCH_REQUIRE_GPIOLIB |
f999b8bd | 548 | help |
3f7e5815 LB |
549 | Support for Intel's 80219 and IOP32X (XScale) family of |
550 | processors. | |
551 | ||
552 | config ARCH_IOP33X | |
553 | bool "IOP33x-based" | |
554 | depends on MMU | |
c750815e | 555 | select CPU_XSCALE |
c334bc15 | 556 | select NEED_MACH_IO_H |
13a5045d | 557 | select NEED_RET_TO_USER |
7ae1f7ec | 558 | select PLAT_IOP |
3f7e5815 | 559 | select PCI |
bb2b180c | 560 | select ARCH_REQUIRE_GPIOLIB |
3f7e5815 LB |
561 | help |
562 | Support for Intel's IOP33X (XScale) family of processors. | |
1da177e4 | 563 | |
3b938be6 RK |
564 | config ARCH_IXP4XX |
565 | bool "IXP4xx-based" | |
a4f7e763 | 566 | depends on MMU |
58af4a24 | 567 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
234b6ced | 568 | select CLKSRC_MMIO |
c750815e | 569 | select CPU_XSCALE |
9dde0ae3 | 570 | select ARCH_REQUIRE_GPIOLIB |
3b938be6 | 571 | select GENERIC_CLOCKEVENTS |
0b05da72 | 572 | select MIGHT_HAVE_PCI |
c334bc15 | 573 | select NEED_MACH_IO_H |
485bdde7 | 574 | select DMABOUNCE if PCI |
c4713074 | 575 | help |
3b938be6 | 576 | Support for Intel's IXP4XX (XScale) family of processors. |
c4713074 | 577 | |
3e93a22b GC |
578 | config ARCH_MVEBU |
579 | bool "Marvell SOCs with Device Tree support" | |
580 | select GENERIC_CLOCKEVENTS | |
581 | select MULTI_IRQ_HANDLER | |
582 | select SPARSE_IRQ | |
583 | select CLKSRC_MMIO | |
584 | select GENERIC_IRQ_CHIP | |
585 | select IRQ_DOMAIN | |
586 | select COMMON_CLK | |
587 | help | |
588 | Support for the Marvell SoC Family with device tree support | |
589 | ||
edabd38e SB |
590 | config ARCH_DOVE |
591 | bool "Marvell Dove" | |
7b769bb3 | 592 | select CPU_V7 |
edabd38e | 593 | select PCI |
edabd38e | 594 | select ARCH_REQUIRE_GPIOLIB |
edabd38e | 595 | select GENERIC_CLOCKEVENTS |
c334bc15 | 596 | select NEED_MACH_IO_H |
edabd38e SB |
597 | select PLAT_ORION |
598 | help | |
599 | Support for the Marvell Dove SoC 88AP510 | |
600 | ||
651c74c7 SB |
601 | config ARCH_KIRKWOOD |
602 | bool "Marvell Kirkwood" | |
c750815e | 603 | select CPU_FEROCEON |
651c74c7 | 604 | select PCI |
a8865655 | 605 | select ARCH_REQUIRE_GPIOLIB |
651c74c7 | 606 | select GENERIC_CLOCKEVENTS |
c334bc15 | 607 | select NEED_MACH_IO_H |
651c74c7 SB |
608 | select PLAT_ORION |
609 | help | |
610 | Support for the following Marvell Kirkwood series SoCs: | |
611 | 88F6180, 88F6192 and 88F6281. | |
612 | ||
40805949 KW |
613 | config ARCH_LPC32XX |
614 | bool "NXP LPC32XX" | |
234b6ced | 615 | select CLKSRC_MMIO |
40805949 KW |
616 | select CPU_ARM926T |
617 | select ARCH_REQUIRE_GPIOLIB | |
618 | select HAVE_IDE | |
619 | select ARM_AMBA | |
620 | select USB_ARCH_HAS_OHCI | |
6d803ba7 | 621 | select CLKDEV_LOOKUP |
40805949 | 622 | select GENERIC_CLOCKEVENTS |
f5c42271 | 623 | select USE_OF |
c49a1830 | 624 | select HAVE_PWM |
40805949 KW |
625 | help |
626 | Support for the NXP LPC32XX family of processors | |
627 | ||
794d15b2 SS |
628 | config ARCH_MV78XX0 |
629 | bool "Marvell MV78xx0" | |
c750815e | 630 | select CPU_FEROCEON |
794d15b2 | 631 | select PCI |
a8865655 | 632 | select ARCH_REQUIRE_GPIOLIB |
794d15b2 | 633 | select GENERIC_CLOCKEVENTS |
c334bc15 | 634 | select NEED_MACH_IO_H |
794d15b2 SS |
635 | select PLAT_ORION |
636 | help | |
637 | Support for the following Marvell MV78xx0 series SoCs: | |
638 | MV781x0, MV782x0. | |
639 | ||
9dd0b194 | 640 | config ARCH_ORION5X |
585cf175 TP |
641 | bool "Marvell Orion" |
642 | depends on MMU | |
c750815e | 643 | select CPU_FEROCEON |
038ee083 | 644 | select PCI |
a8865655 | 645 | select ARCH_REQUIRE_GPIOLIB |
51cbff1d | 646 | select GENERIC_CLOCKEVENTS |
b5e12229 | 647 | select NEED_MACH_IO_H |
69b02f6a | 648 | select PLAT_ORION |
585cf175 | 649 | help |
9dd0b194 | 650 | Support for the following Marvell Orion 5x series SoCs: |
d2b2a6bb | 651 | Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
d323ade1 | 652 | Orion-2 (5281), Orion-1-90 (6183). |
585cf175 | 653 | |
788c9700 | 654 | config ARCH_MMP |
2f7e8fae | 655 | bool "Marvell PXA168/910/MMP2" |
788c9700 | 656 | depends on MMU |
788c9700 | 657 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 658 | select CLKDEV_LOOKUP |
788c9700 | 659 | select GENERIC_CLOCKEVENTS |
157d2644 | 660 | select GPIO_PXA |
c24b3114 | 661 | select IRQ_DOMAIN |
788c9700 | 662 | select PLAT_PXA |
0bd86961 | 663 | select SPARSE_IRQ |
3c7241bd | 664 | select GENERIC_ALLOCATOR |
788c9700 | 665 | help |
2f7e8fae | 666 | Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. |
788c9700 RK |
667 | |
668 | config ARCH_KS8695 | |
669 | bool "Micrel/Kendin KS8695" | |
670 | select CPU_ARM922T | |
98830bc9 | 671 | select ARCH_REQUIRE_GPIOLIB |
5cfc8ee0 | 672 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 673 | select NEED_MACH_MEMORY_H |
788c9700 RK |
674 | help |
675 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based | |
676 | System-on-Chip devices. | |
677 | ||
788c9700 RK |
678 | config ARCH_W90X900 |
679 | bool "Nuvoton W90X900 CPU" | |
680 | select CPU_ARM926T | |
c52d3d68 | 681 | select ARCH_REQUIRE_GPIOLIB |
6d803ba7 | 682 | select CLKDEV_LOOKUP |
6fa5d5f7 | 683 | select CLKSRC_MMIO |
58b5369e | 684 | select GENERIC_CLOCKEVENTS |
788c9700 | 685 | help |
a8bc4ead | 686 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
687 | At present, the w90x900 has been renamed nuc900, regarding | |
688 | the ARM series product line, you can login the following | |
689 | link address to know more. | |
690 | ||
691 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ | |
692 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> | |
788c9700 | 693 | |
c5f80065 EG |
694 | config ARCH_TEGRA |
695 | bool "NVIDIA Tegra" | |
4073723a | 696 | select CLKDEV_LOOKUP |
234b6ced | 697 | select CLKSRC_MMIO |
c5f80065 EG |
698 | select GENERIC_CLOCKEVENTS |
699 | select GENERIC_GPIO | |
700 | select HAVE_CLK | |
3b55658a | 701 | select HAVE_SMP |
ce5ea9f3 | 702 | select MIGHT_HAVE_CACHE_L2X0 |
c334bc15 | 703 | select NEED_MACH_IO_H if PCI |
7056d423 | 704 | select ARCH_HAS_CPUFREQ |
2c95b7e0 | 705 | select USE_OF |
92fe58f0 | 706 | select COMMON_CLK |
c5f80065 EG |
707 | help |
708 | This enables support for NVIDIA Tegra based systems (Tegra APX, | |
709 | Tegra 6xx and Tegra 2 series). | |
710 | ||
af75655c JI |
711 | config ARCH_PICOXCELL |
712 | bool "Picochip picoXcell" | |
713 | select ARCH_REQUIRE_GPIOLIB | |
714 | select ARM_PATCH_PHYS_VIRT | |
715 | select ARM_VIC | |
716 | select CPU_V6K | |
717 | select DW_APB_TIMER | |
cfda5901 | 718 | select DW_APB_TIMER_OF |
af75655c JI |
719 | select GENERIC_CLOCKEVENTS |
720 | select GENERIC_GPIO | |
af75655c JI |
721 | select HAVE_TCM |
722 | select NO_IOPORT | |
98e27a5c | 723 | select SPARSE_IRQ |
af75655c JI |
724 | select USE_OF |
725 | help | |
726 | This enables support for systems based on the Picochip picoXcell | |
727 | family of Femtocell devices. The picoxcell support requires device tree | |
728 | for all boards. | |
729 | ||
4af6fee1 DS |
730 | config ARCH_PNX4008 |
731 | bool "Philips Nexperia PNX4008 Mobile" | |
c750815e | 732 | select CPU_ARM926T |
6d803ba7 | 733 | select CLKDEV_LOOKUP |
5cfc8ee0 | 734 | select ARCH_USES_GETTIMEOFFSET |
4af6fee1 DS |
735 | help |
736 | This enables support for Philips PNX4008 mobile platform. | |
737 | ||
1da177e4 | 738 | config ARCH_PXA |
2c8086a5 | 739 | bool "PXA2xx/PXA3xx-based" |
a4f7e763 | 740 | depends on MMU |
034d2f5a | 741 | select ARCH_MTD_XIP |
89c52ed4 | 742 | select ARCH_HAS_CPUFREQ |
6d803ba7 | 743 | select CLKDEV_LOOKUP |
234b6ced | 744 | select CLKSRC_MMIO |
7444a72e | 745 | select ARCH_REQUIRE_GPIOLIB |
981d0f39 | 746 | select GENERIC_CLOCKEVENTS |
157d2644 | 747 | select GPIO_PXA |
bd5ce433 | 748 | select PLAT_PXA |
6ac6b817 | 749 | select SPARSE_IRQ |
4e234cc0 | 750 | select AUTO_ZRELADDR |
8a97ae2f | 751 | select MULTI_IRQ_HANDLER |
15e0d9e3 | 752 | select ARM_CPU_SUSPEND if PM |
d0ee9f40 | 753 | select HAVE_IDE |
f999b8bd | 754 | help |
2c8086a5 | 755 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
1da177e4 | 756 | |
788c9700 RK |
757 | config ARCH_MSM |
758 | bool "Qualcomm MSM" | |
4b536b8d | 759 | select HAVE_CLK |
49cbe786 | 760 | select GENERIC_CLOCKEVENTS |
923a081c | 761 | select ARCH_REQUIRE_GPIOLIB |
bd32344a | 762 | select CLKDEV_LOOKUP |
49cbe786 | 763 | help |
4b53eb4f DW |
764 | Support for Qualcomm MSM/QSD based systems. This runs on the |
765 | apps processor of the MSM/QSD and depends on a shared memory | |
766 | interface to the modem processor which runs the baseband | |
767 | stack and controls some vital subsystems | |
768 | (clock and power control, etc). | |
49cbe786 | 769 | |
c793c1b0 | 770 | config ARCH_SHMOBILE |
6d72ad35 PM |
771 | bool "Renesas SH-Mobile / R-Mobile" |
772 | select HAVE_CLK | |
5e93c6b4 | 773 | select CLKDEV_LOOKUP |
aa3831cf | 774 | select HAVE_MACH_CLKDEV |
3b55658a | 775 | select HAVE_SMP |
6d72ad35 | 776 | select GENERIC_CLOCKEVENTS |
ce5ea9f3 | 777 | select MIGHT_HAVE_CACHE_L2X0 |
6d72ad35 PM |
778 | select NO_IOPORT |
779 | select SPARSE_IRQ | |
60f1435c | 780 | select MULTI_IRQ_HANDLER |
e3e01091 | 781 | select PM_GENERIC_DOMAINS if PM |
0cdc8b92 | 782 | select NEED_MACH_MEMORY_H |
c793c1b0 | 783 | help |
6d72ad35 | 784 | Support for Renesas's SH-Mobile and R-Mobile ARM platforms. |
c793c1b0 | 785 | |
1da177e4 LT |
786 | config ARCH_RPC |
787 | bool "RiscPC" | |
788 | select ARCH_ACORN | |
789 | select FIQ | |
a08b6b79 | 790 | select ARCH_MAY_HAVE_PC_FDC |
341eb781 | 791 | select HAVE_PATA_PLATFORM |
065909b9 | 792 | select ISA_DMA_API |
5ea81769 | 793 | select NO_IOPORT |
07f841b7 | 794 | select ARCH_SPARSEMEM_ENABLE |
5cfc8ee0 | 795 | select ARCH_USES_GETTIMEOFFSET |
d0ee9f40 | 796 | select HAVE_IDE |
c334bc15 | 797 | select NEED_MACH_IO_H |
0cdc8b92 | 798 | select NEED_MACH_MEMORY_H |
1da177e4 LT |
799 | help |
800 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
801 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
802 | ||
803 | config ARCH_SA1100 | |
804 | bool "SA1100-based" | |
234b6ced | 805 | select CLKSRC_MMIO |
c750815e | 806 | select CPU_SA1100 |
f7e68bbf | 807 | select ISA |
05944d74 | 808 | select ARCH_SPARSEMEM_ENABLE |
034d2f5a | 809 | select ARCH_MTD_XIP |
89c52ed4 | 810 | select ARCH_HAS_CPUFREQ |
1937f5b9 | 811 | select CPU_FREQ |
3e238be2 | 812 | select GENERIC_CLOCKEVENTS |
4a8f8340 | 813 | select CLKDEV_LOOKUP |
7444a72e | 814 | select ARCH_REQUIRE_GPIOLIB |
d0ee9f40 | 815 | select HAVE_IDE |
0cdc8b92 | 816 | select NEED_MACH_MEMORY_H |
375dec92 | 817 | select SPARSE_IRQ |
f999b8bd MM |
818 | help |
819 | Support for StrongARM 11x0 based boards. | |
1da177e4 | 820 | |
b130d5c2 KK |
821 | config ARCH_S3C24XX |
822 | bool "Samsung S3C24XX SoCs" | |
0a938b97 | 823 | select GENERIC_GPIO |
9d56c02a | 824 | select ARCH_HAS_CPUFREQ |
9483a578 | 825 | select HAVE_CLK |
e83626f2 | 826 | select CLKDEV_LOOKUP |
5cfc8ee0 | 827 | select ARCH_USES_GETTIMEOFFSET |
20676c15 | 828 | select HAVE_S3C2410_I2C if I2C |
b130d5c2 KK |
829 | select HAVE_S3C_RTC if RTC_CLASS |
830 | select HAVE_S3C2410_WATCHDOG if WATCHDOG | |
c334bc15 | 831 | select NEED_MACH_IO_H |
1da177e4 | 832 | help |
b130d5c2 KK |
833 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
834 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST | |
835 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the | |
836 | Samsung SMDK2410 development board (and derivatives). | |
63b1f51b | 837 | |
a08ab637 BD |
838 | config ARCH_S3C64XX |
839 | bool "Samsung S3C64XX" | |
89f1fa08 | 840 | select PLAT_SAMSUNG |
89f0ce72 | 841 | select CPU_V6 |
89f0ce72 | 842 | select ARM_VIC |
a08ab637 | 843 | select HAVE_CLK |
6700397a | 844 | select HAVE_TCM |
226e85f4 | 845 | select CLKDEV_LOOKUP |
89f0ce72 | 846 | select NO_IOPORT |
5cfc8ee0 | 847 | select ARCH_USES_GETTIMEOFFSET |
89c52ed4 | 848 | select ARCH_HAS_CPUFREQ |
89f0ce72 BD |
849 | select ARCH_REQUIRE_GPIOLIB |
850 | select SAMSUNG_CLKSRC | |
851 | select SAMSUNG_IRQ_VIC_TIMER | |
89f0ce72 | 852 | select S3C_GPIO_TRACK |
89f0ce72 BD |
853 | select S3C_DEV_NAND |
854 | select USB_ARCH_HAS_OHCI | |
855 | select SAMSUNG_GPIOLIB_4BIT | |
20676c15 | 856 | select HAVE_S3C2410_I2C if I2C |
c39d8d55 | 857 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
a08ab637 BD |
858 | help |
859 | Samsung S3C64XX series based systems | |
860 | ||
49b7a491 KK |
861 | config ARCH_S5P64X0 |
862 | bool "Samsung S5P6440 S5P6450" | |
c4ffccdd KK |
863 | select CPU_V6 |
864 | select GENERIC_GPIO | |
865 | select HAVE_CLK | |
d8b22d25 | 866 | select CLKDEV_LOOKUP |
0665ccc4 | 867 | select CLKSRC_MMIO |
c39d8d55 | 868 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
9e65bbf2 | 869 | select GENERIC_CLOCKEVENTS |
20676c15 | 870 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 871 | select HAVE_S3C_RTC if RTC_CLASS |
c4ffccdd | 872 | help |
49b7a491 KK |
873 | Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, |
874 | SMDK6450. | |
c4ffccdd | 875 | |
acc84707 MS |
876 | config ARCH_S5PC100 |
877 | bool "Samsung S5PC100" | |
5a7652f2 BM |
878 | select GENERIC_GPIO |
879 | select HAVE_CLK | |
29e8eb0f | 880 | select CLKDEV_LOOKUP |
5a7652f2 | 881 | select CPU_V7 |
925c68cd | 882 | select ARCH_USES_GETTIMEOFFSET |
20676c15 | 883 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 884 | select HAVE_S3C_RTC if RTC_CLASS |
c39d8d55 | 885 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
5a7652f2 | 886 | help |
acc84707 | 887 | Samsung S5PC100 series based systems |
5a7652f2 | 888 | |
170f4e42 KK |
889 | config ARCH_S5PV210 |
890 | bool "Samsung S5PV210/S5PC110" | |
891 | select CPU_V7 | |
eecb6a84 | 892 | select ARCH_SPARSEMEM_ENABLE |
0f75a96b | 893 | select ARCH_HAS_HOLES_MEMORYMODEL |
170f4e42 KK |
894 | select GENERIC_GPIO |
895 | select HAVE_CLK | |
b2a9dd46 | 896 | select CLKDEV_LOOKUP |
0665ccc4 | 897 | select CLKSRC_MMIO |
d8144aea | 898 | select ARCH_HAS_CPUFREQ |
9e65bbf2 | 899 | select GENERIC_CLOCKEVENTS |
20676c15 | 900 | select HAVE_S3C2410_I2C if I2C |
754961a8 | 901 | select HAVE_S3C_RTC if RTC_CLASS |
c39d8d55 | 902 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
0cdc8b92 | 903 | select NEED_MACH_MEMORY_H |
170f4e42 KK |
904 | help |
905 | Samsung S5PV210/S5PC110 series based systems | |
906 | ||
83014579 KK |
907 | config ARCH_EXYNOS |
908 | bool "SAMSUNG EXYNOS" | |
cc0e72b8 | 909 | select CPU_V7 |
f567fa6f | 910 | select ARCH_SPARSEMEM_ENABLE |
0f75a96b | 911 | select ARCH_HAS_HOLES_MEMORYMODEL |
cc0e72b8 CY |
912 | select GENERIC_GPIO |
913 | select HAVE_CLK | |
badc4f2d | 914 | select CLKDEV_LOOKUP |
b333fb16 | 915 | select ARCH_HAS_CPUFREQ |
cc0e72b8 | 916 | select GENERIC_CLOCKEVENTS |
754961a8 | 917 | select HAVE_S3C_RTC if RTC_CLASS |
20676c15 | 918 | select HAVE_S3C2410_I2C if I2C |
c39d8d55 | 919 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
0cdc8b92 | 920 | select NEED_MACH_MEMORY_H |
cc0e72b8 | 921 | help |
83014579 | 922 | Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) |
cc0e72b8 | 923 | |
1da177e4 LT |
924 | config ARCH_SHARK |
925 | bool "Shark" | |
c750815e | 926 | select CPU_SA110 |
f7e68bbf RK |
927 | select ISA |
928 | select ISA_DMA | |
3bca103a | 929 | select ZONE_DMA |
f7e68bbf | 930 | select PCI |
5cfc8ee0 | 931 | select ARCH_USES_GETTIMEOFFSET |
0cdc8b92 | 932 | select NEED_MACH_MEMORY_H |
c334bc15 | 933 | select NEED_MACH_IO_H |
f999b8bd MM |
934 | help |
935 | Support for the StrongARM based Digital DNARD machine, also known | |
936 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 | 937 | |
d98aac75 LW |
938 | config ARCH_U300 |
939 | bool "ST-Ericsson U300 Series" | |
940 | depends on MMU | |
234b6ced | 941 | select CLKSRC_MMIO |
d98aac75 | 942 | select CPU_ARM926T |
bc581770 | 943 | select HAVE_TCM |
d98aac75 | 944 | select ARM_AMBA |
5485c1e0 | 945 | select ARM_PATCH_PHYS_VIRT |
d98aac75 | 946 | select ARM_VIC |
d98aac75 | 947 | select GENERIC_CLOCKEVENTS |
6d803ba7 | 948 | select CLKDEV_LOOKUP |
50667d63 | 949 | select COMMON_CLK |
d98aac75 | 950 | select GENERIC_GPIO |
cc890cd7 | 951 | select ARCH_REQUIRE_GPIOLIB |
d98aac75 LW |
952 | help |
953 | Support for ST-Ericsson U300 series mobile platforms. | |
954 | ||
ccf50e23 RK |
955 | config ARCH_U8500 |
956 | bool "ST-Ericsson U8500 Series" | |
67ae14fc | 957 | depends on MMU |
ccf50e23 RK |
958 | select CPU_V7 |
959 | select ARM_AMBA | |
ccf50e23 | 960 | select GENERIC_CLOCKEVENTS |
6d803ba7 | 961 | select CLKDEV_LOOKUP |
94bdc0e2 | 962 | select ARCH_REQUIRE_GPIOLIB |
7c1a70e9 | 963 | select ARCH_HAS_CPUFREQ |
3b55658a | 964 | select HAVE_SMP |
ce5ea9f3 | 965 | select MIGHT_HAVE_CACHE_L2X0 |
ccf50e23 RK |
966 | help |
967 | Support for ST-Ericsson's Ux500 architecture | |
968 | ||
969 | config ARCH_NOMADIK | |
970 | bool "STMicroelectronics Nomadik" | |
971 | select ARM_AMBA | |
972 | select ARM_VIC | |
973 | select CPU_ARM926T | |
4a31bd28 | 974 | select COMMON_CLK |
ccf50e23 | 975 | select GENERIC_CLOCKEVENTS |
0fa7be40 | 976 | select PINCTRL |
ce5ea9f3 | 977 | select MIGHT_HAVE_CACHE_L2X0 |
ccf50e23 RK |
978 | select ARCH_REQUIRE_GPIOLIB |
979 | help | |
980 | Support for the Nomadik platform by ST-Ericsson | |
981 | ||
7c6337e2 KH |
982 | config ARCH_DAVINCI |
983 | bool "TI DaVinci" | |
7c6337e2 | 984 | select GENERIC_CLOCKEVENTS |
dce1115b | 985 | select ARCH_REQUIRE_GPIOLIB |
3bca103a | 986 | select ZONE_DMA |
9232fcc9 | 987 | select HAVE_IDE |
6d803ba7 | 988 | select CLKDEV_LOOKUP |
20e9969b | 989 | select GENERIC_ALLOCATOR |
dc7ad3b3 | 990 | select GENERIC_IRQ_CHIP |
ae88e05a | 991 | select ARCH_HAS_HOLES_MEMORYMODEL |
7c6337e2 KH |
992 | help |
993 | Support for TI's DaVinci platform. | |
994 | ||
3b938be6 RK |
995 | config ARCH_OMAP |
996 | bool "TI OMAP" | |
00a36698 | 997 | depends on MMU |
9483a578 | 998 | select HAVE_CLK |
7444a72e | 999 | select ARCH_REQUIRE_GPIOLIB |
89c52ed4 | 1000 | select ARCH_HAS_CPUFREQ |
354a183f | 1001 | select CLKSRC_MMIO |
06cad098 | 1002 | select GENERIC_CLOCKEVENTS |
9af915da | 1003 | select ARCH_HAS_HOLES_MEMORYMODEL |
3b938be6 | 1004 | help |
6e457bb0 | 1005 | Support for TI's OMAP platform (OMAP1/2/3/4). |
3b938be6 | 1006 | |
cee37e50 | 1007 | config PLAT_SPEAR |
1008 | bool "ST SPEAr" | |
1009 | select ARM_AMBA | |
1010 | select ARCH_REQUIRE_GPIOLIB | |
6d803ba7 | 1011 | select CLKDEV_LOOKUP |
5df33a62 | 1012 | select COMMON_CLK |
d6e15d78 | 1013 | select CLKSRC_MMIO |
cee37e50 | 1014 | select GENERIC_CLOCKEVENTS |
cee37e50 | 1015 | select HAVE_CLK |
1016 | help | |
1017 | Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). | |
1018 | ||
21f47fbc AC |
1019 | config ARCH_VT8500 |
1020 | bool "VIA/WonderMedia 85xx" | |
1021 | select CPU_ARM926T | |
1022 | select GENERIC_GPIO | |
1023 | select ARCH_HAS_CPUFREQ | |
1024 | select GENERIC_CLOCKEVENTS | |
1025 | select ARCH_REQUIRE_GPIOLIB | |
21f47fbc AC |
1026 | help |
1027 | Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. | |
02c981c0 | 1028 | |
b85a3ef4 JL |
1029 | config ARCH_ZYNQ |
1030 | bool "Xilinx Zynq ARM Cortex A9 Platform" | |
02c981c0 | 1031 | select CPU_V7 |
02c981c0 BD |
1032 | select GENERIC_CLOCKEVENTS |
1033 | select CLKDEV_LOOKUP | |
b85a3ef4 JL |
1034 | select ARM_GIC |
1035 | select ARM_AMBA | |
1036 | select ICST | |
ce5ea9f3 | 1037 | select MIGHT_HAVE_CACHE_L2X0 |
02c981c0 | 1038 | select USE_OF |
02c981c0 | 1039 | help |
b85a3ef4 | 1040 | Support for Xilinx Zynq ARM Cortex A9 Platform |
1da177e4 LT |
1041 | endchoice |
1042 | ||
ccf50e23 RK |
1043 | # |
1044 | # This is sorted alphabetically by mach-* pathname. However, plat-* | |
1045 | # Kconfigs may be included either alphabetically (according to the | |
1046 | # plat- suffix) or along side the corresponding mach-* source. | |
1047 | # | |
3e93a22b GC |
1048 | source "arch/arm/mach-mvebu/Kconfig" |
1049 | ||
95b8f20f RK |
1050 | source "arch/arm/mach-at91/Kconfig" |
1051 | ||
1052 | source "arch/arm/mach-bcmring/Kconfig" | |
1053 | ||
1da177e4 LT |
1054 | source "arch/arm/mach-clps711x/Kconfig" |
1055 | ||
d94f944e AV |
1056 | source "arch/arm/mach-cns3xxx/Kconfig" |
1057 | ||
95b8f20f RK |
1058 | source "arch/arm/mach-davinci/Kconfig" |
1059 | ||
1060 | source "arch/arm/mach-dove/Kconfig" | |
1061 | ||
e7736d47 LB |
1062 | source "arch/arm/mach-ep93xx/Kconfig" |
1063 | ||
1da177e4 LT |
1064 | source "arch/arm/mach-footbridge/Kconfig" |
1065 | ||
59d3a193 PZ |
1066 | source "arch/arm/mach-gemini/Kconfig" |
1067 | ||
95b8f20f RK |
1068 | source "arch/arm/mach-h720x/Kconfig" |
1069 | ||
1da177e4 LT |
1070 | source "arch/arm/mach-integrator/Kconfig" |
1071 | ||
3f7e5815 LB |
1072 | source "arch/arm/mach-iop32x/Kconfig" |
1073 | ||
1074 | source "arch/arm/mach-iop33x/Kconfig" | |
1da177e4 | 1075 | |
285f5fa7 DW |
1076 | source "arch/arm/mach-iop13xx/Kconfig" |
1077 | ||
1da177e4 LT |
1078 | source "arch/arm/mach-ixp4xx/Kconfig" |
1079 | ||
95b8f20f RK |
1080 | source "arch/arm/mach-kirkwood/Kconfig" |
1081 | ||
1082 | source "arch/arm/mach-ks8695/Kconfig" | |
1083 | ||
95b8f20f RK |
1084 | source "arch/arm/mach-msm/Kconfig" |
1085 | ||
794d15b2 SS |
1086 | source "arch/arm/mach-mv78xx0/Kconfig" |
1087 | ||
95b8f20f | 1088 | source "arch/arm/plat-mxc/Kconfig" |
1da177e4 | 1089 | |
1d3f33d5 SG |
1090 | source "arch/arm/mach-mxs/Kconfig" |
1091 | ||
95b8f20f | 1092 | source "arch/arm/mach-netx/Kconfig" |
49cbe786 | 1093 | |
95b8f20f RK |
1094 | source "arch/arm/mach-nomadik/Kconfig" |
1095 | source "arch/arm/plat-nomadik/Kconfig" | |
1096 | ||
d48af15e TL |
1097 | source "arch/arm/plat-omap/Kconfig" |
1098 | ||
1099 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 1100 | |
1dbae815 TL |
1101 | source "arch/arm/mach-omap2/Kconfig" |
1102 | ||
9dd0b194 | 1103 | source "arch/arm/mach-orion5x/Kconfig" |
585cf175 | 1104 | |
95b8f20f RK |
1105 | source "arch/arm/mach-pxa/Kconfig" |
1106 | source "arch/arm/plat-pxa/Kconfig" | |
585cf175 | 1107 | |
95b8f20f RK |
1108 | source "arch/arm/mach-mmp/Kconfig" |
1109 | ||
1110 | source "arch/arm/mach-realview/Kconfig" | |
1111 | ||
1112 | source "arch/arm/mach-sa1100/Kconfig" | |
edabd38e | 1113 | |
cf383678 | 1114 | source "arch/arm/plat-samsung/Kconfig" |
a21765a7 BD |
1115 | source "arch/arm/plat-s3c24xx/Kconfig" |
1116 | ||
cee37e50 | 1117 | source "arch/arm/plat-spear/Kconfig" |
a21765a7 | 1118 | |
85fd6d63 | 1119 | source "arch/arm/mach-s3c24xx/Kconfig" |
b130d5c2 | 1120 | if ARCH_S3C24XX |
a21765a7 BD |
1121 | source "arch/arm/mach-s3c2412/Kconfig" |
1122 | source "arch/arm/mach-s3c2440/Kconfig" | |
a21765a7 | 1123 | endif |
1da177e4 | 1124 | |
a08ab637 | 1125 | if ARCH_S3C64XX |
431107ea | 1126 | source "arch/arm/mach-s3c64xx/Kconfig" |
a08ab637 BD |
1127 | endif |
1128 | ||
49b7a491 | 1129 | source "arch/arm/mach-s5p64x0/Kconfig" |
c4ffccdd | 1130 | |
5a7652f2 | 1131 | source "arch/arm/mach-s5pc100/Kconfig" |
5a7652f2 | 1132 | |
170f4e42 KK |
1133 | source "arch/arm/mach-s5pv210/Kconfig" |
1134 | ||
83014579 | 1135 | source "arch/arm/mach-exynos/Kconfig" |
cc0e72b8 | 1136 | |
882d01f9 | 1137 | source "arch/arm/mach-shmobile/Kconfig" |
52c543f9 | 1138 | |
c5f80065 EG |
1139 | source "arch/arm/mach-tegra/Kconfig" |
1140 | ||
95b8f20f | 1141 | source "arch/arm/mach-u300/Kconfig" |
1da177e4 | 1142 | |
95b8f20f | 1143 | source "arch/arm/mach-ux500/Kconfig" |
1da177e4 LT |
1144 | |
1145 | source "arch/arm/mach-versatile/Kconfig" | |
1146 | ||
ceade897 | 1147 | source "arch/arm/mach-vexpress/Kconfig" |
420c34e4 | 1148 | source "arch/arm/plat-versatile/Kconfig" |
ceade897 | 1149 | |
21f47fbc AC |
1150 | source "arch/arm/mach-vt8500/Kconfig" |
1151 | ||
7ec80ddf | 1152 | source "arch/arm/mach-w90x900/Kconfig" |
1153 | ||
1da177e4 LT |
1154 | # Definitions to make life easier |
1155 | config ARCH_ACORN | |
1156 | bool | |
1157 | ||
7ae1f7ec LB |
1158 | config PLAT_IOP |
1159 | bool | |
469d3044 | 1160 | select GENERIC_CLOCKEVENTS |
7ae1f7ec | 1161 | |
69b02f6a LB |
1162 | config PLAT_ORION |
1163 | bool | |
bfe45e0b | 1164 | select CLKSRC_MMIO |
dc7ad3b3 | 1165 | select GENERIC_IRQ_CHIP |
278b45b0 | 1166 | select IRQ_DOMAIN |
2f129bf4 | 1167 | select COMMON_CLK |
69b02f6a | 1168 | |
bd5ce433 EM |
1169 | config PLAT_PXA |
1170 | bool | |
1171 | ||
f4b8b319 RK |
1172 | config PLAT_VERSATILE |
1173 | bool | |
1174 | ||
e3887714 RK |
1175 | config ARM_TIMER_SP804 |
1176 | bool | |
bfe45e0b | 1177 | select CLKSRC_MMIO |
a7bf6162 | 1178 | select HAVE_SCHED_CLOCK |
e3887714 | 1179 | |
1da177e4 LT |
1180 | source arch/arm/mm/Kconfig |
1181 | ||
958cab0f RK |
1182 | config ARM_NR_BANKS |
1183 | int | |
1184 | default 16 if ARCH_EP93XX | |
1185 | default 8 | |
1186 | ||
afe4b25e LB |
1187 | config IWMMXT |
1188 | bool "Enable iWMMXt support" | |
ef6c8445 HZ |
1189 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 |
1190 | default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP | |
afe4b25e LB |
1191 | help |
1192 | Enable support for iWMMXt context switching at run time if | |
1193 | running on a CPU that supports it. | |
1194 | ||
1da177e4 LT |
1195 | config XSCALE_PMU |
1196 | bool | |
bfc994b5 | 1197 | depends on CPU_XSCALE |
1da177e4 LT |
1198 | default y |
1199 | ||
52108641 | 1200 | config MULTI_IRQ_HANDLER |
1201 | bool | |
1202 | help | |
1203 | Allow each machine to specify it's own IRQ handler at run time. | |
1204 | ||
3b93e7b0 HC |
1205 | if !MMU |
1206 | source "arch/arm/Kconfig-nommu" | |
1207 | endif | |
1208 | ||
f0c4b8d6 WD |
1209 | config ARM_ERRATA_326103 |
1210 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" | |
1211 | depends on CPU_V6 | |
1212 | help | |
1213 | Executing a SWP instruction to read-only memory does not set bit 11 | |
1214 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to | |
1215 | treat the access as a read, preventing a COW from occurring and | |
1216 | causing the faulting task to livelock. | |
1217 | ||
9cba3ccc CM |
1218 | config ARM_ERRATA_411920 |
1219 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" | |
e399b1a4 | 1220 | depends on CPU_V6 || CPU_V6K |
9cba3ccc CM |
1221 | help |
1222 | Invalidation of the Instruction Cache operation can | |
1223 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. | |
1224 | It does not affect the MPCore. This option enables the ARM Ltd. | |
1225 | recommended workaround. | |
1226 | ||
7ce236fc CM |
1227 | config ARM_ERRATA_430973 |
1228 | bool "ARM errata: Stale prediction on replaced interworking branch" | |
1229 | depends on CPU_V7 | |
1230 | help | |
1231 | This option enables the workaround for the 430973 Cortex-A8 | |
1232 | (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb | |
1233 | interworking branch is replaced with another code sequence at the | |
1234 | same virtual address, whether due to self-modifying code or virtual | |
1235 | to physical address re-mapping, Cortex-A8 does not recover from the | |
1236 | stale interworking branch prediction. This results in Cortex-A8 | |
1237 | executing the new code sequence in the incorrect ARM or Thumb state. | |
1238 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE | |
1239 | and also flushes the branch target cache at every context switch. | |
1240 | Note that setting specific bits in the ACTLR register may not be | |
1241 | available in non-secure mode. | |
1242 | ||
855c551f CM |
1243 | config ARM_ERRATA_458693 |
1244 | bool "ARM errata: Processor deadlock when a false hazard is created" | |
1245 | depends on CPU_V7 | |
1246 | help | |
1247 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) | |
1248 | erratum. For very specific sequences of memory operations, it is | |
1249 | possible for a hazard condition intended for a cache line to instead | |
1250 | be incorrectly associated with a different cache line. This false | |
1251 | hazard might then cause a processor deadlock. The workaround enables | |
1252 | the L1 caching of the NEON accesses and disables the PLD instruction | |
1253 | in the ACTLR register. Note that setting specific bits in the ACTLR | |
1254 | register may not be available in non-secure mode. | |
1255 | ||
0516e464 CM |
1256 | config ARM_ERRATA_460075 |
1257 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" | |
1258 | depends on CPU_V7 | |
1259 | help | |
1260 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) | |
1261 | erratum. Any asynchronous access to the L2 cache may encounter a | |
1262 | situation in which recent store transactions to the L2 cache are lost | |
1263 | and overwritten with stale memory contents from external memory. The | |
1264 | workaround disables the write-allocate mode for the L2 cache via the | |
1265 | ACTLR register. Note that setting specific bits in the ACTLR register | |
1266 | may not be available in non-secure mode. | |
1267 | ||
9f05027c WD |
1268 | config ARM_ERRATA_742230 |
1269 | bool "ARM errata: DMB operation may be faulty" | |
1270 | depends on CPU_V7 && SMP | |
1271 | help | |
1272 | This option enables the workaround for the 742230 Cortex-A9 | |
1273 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction | |
1274 | between two write operations may not ensure the correct visibility | |
1275 | ordering of the two writes. This workaround sets a specific bit in | |
1276 | the diagnostic register of the Cortex-A9 which causes the DMB | |
1277 | instruction to behave as a DSB, ensuring the correct behaviour of | |
1278 | the two writes. | |
1279 | ||
a672e99b WD |
1280 | config ARM_ERRATA_742231 |
1281 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" | |
1282 | depends on CPU_V7 && SMP | |
1283 | help | |
1284 | This option enables the workaround for the 742231 Cortex-A9 | |
1285 | (r2p0..r2p2) erratum. Under certain conditions, specific to the | |
1286 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, | |
1287 | accessing some data located in the same cache line, may get corrupted | |
1288 | data due to bad handling of the address hazard when the line gets | |
1289 | replaced from one of the CPUs at the same time as another CPU is | |
1290 | accessing it. This workaround sets specific bits in the diagnostic | |
1291 | register of the Cortex-A9 which reduces the linefill issuing | |
1292 | capabilities of the processor. | |
1293 | ||
9e65582a | 1294 | config PL310_ERRATA_588369 |
fa0ce403 | 1295 | bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" |
2839e06c | 1296 | depends on CACHE_L2X0 |
9e65582a SS |
1297 | help |
1298 | The PL310 L2 cache controller implements three types of Clean & | |
1299 | Invalidate maintenance operations: by Physical Address | |
1300 | (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). | |
1301 | They are architecturally defined to behave as the execution of a | |
1302 | clean operation followed immediately by an invalidate operation, | |
1303 | both performing to the same memory location. This functionality | |
1304 | is not correctly implemented in PL310 as clean lines are not | |
2839e06c | 1305 | invalidated as a result of these operations. |
cdf357f1 WD |
1306 | |
1307 | config ARM_ERRATA_720789 | |
1308 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" | |
e66dc745 | 1309 | depends on CPU_V7 |
cdf357f1 WD |
1310 | help |
1311 | This option enables the workaround for the 720789 Cortex-A9 (prior to | |
1312 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the | |
1313 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. | |
1314 | As a consequence of this erratum, some TLB entries which should be | |
1315 | invalidated are not, resulting in an incoherency in the system page | |
1316 | tables. The workaround changes the TLB flushing routines to invalidate | |
1317 | entries regardless of the ASID. | |
475d92fc | 1318 | |
1f0090a1 | 1319 | config PL310_ERRATA_727915 |
fa0ce403 | 1320 | bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" |
1f0090a1 RK |
1321 | depends on CACHE_L2X0 |
1322 | help | |
1323 | PL310 implements the Clean & Invalidate by Way L2 cache maintenance | |
1324 | operation (offset 0x7FC). This operation runs in background so that | |
1325 | PL310 can handle normal accesses while it is in progress. Under very | |
1326 | rare circumstances, due to this erratum, write data can be lost when | |
1327 | PL310 treats a cacheable write transaction during a Clean & | |
1328 | Invalidate by Way operation. | |
1329 | ||
475d92fc WD |
1330 | config ARM_ERRATA_743622 |
1331 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" | |
1332 | depends on CPU_V7 | |
1333 | help | |
1334 | This option enables the workaround for the 743622 Cortex-A9 | |
efbc74ac | 1335 | (r2p*) erratum. Under very rare conditions, a faulty |
475d92fc WD |
1336 | optimisation in the Cortex-A9 Store Buffer may lead to data |
1337 | corruption. This workaround sets a specific bit in the diagnostic | |
1338 | register of the Cortex-A9 which disables the Store Buffer | |
1339 | optimisation, preventing the defect from occurring. This has no | |
1340 | visible impact on the overall performance or power consumption of the | |
1341 | processor. | |
1342 | ||
9a27c27c WD |
1343 | config ARM_ERRATA_751472 |
1344 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" | |
ba90c516 | 1345 | depends on CPU_V7 |
9a27c27c WD |
1346 | help |
1347 | This option enables the workaround for the 751472 Cortex-A9 (prior | |
1348 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the | |
1349 | completion of a following broadcasted operation if the second | |
1350 | operation is received by a CPU before the ICIALLUIS has completed, | |
1351 | potentially leading to corrupted entries in the cache or TLB. | |
1352 | ||
fa0ce403 WD |
1353 | config PL310_ERRATA_753970 |
1354 | bool "PL310 errata: cache sync operation may be faulty" | |
885028e4 SK |
1355 | depends on CACHE_PL310 |
1356 | help | |
1357 | This option enables the workaround for the 753970 PL310 (r3p0) erratum. | |
1358 | ||
1359 | Under some condition the effect of cache sync operation on | |
1360 | the store buffer still remains when the operation completes. | |
1361 | This means that the store buffer is always asked to drain and | |
1362 | this prevents it from merging any further writes. The workaround | |
1363 | is to replace the normal offset of cache sync operation (0x730) | |
1364 | by another offset targeting an unmapped PL310 register 0x740. | |
1365 | This has the same effect as the cache sync operation: store buffer | |
1366 | drain and waiting for all buffers empty. | |
1367 | ||
fcbdc5fe WD |
1368 | config ARM_ERRATA_754322 |
1369 | bool "ARM errata: possible faulty MMU translations following an ASID switch" | |
1370 | depends on CPU_V7 | |
1371 | help | |
1372 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, | |
1373 | r3p*) erratum. A speculative memory access may cause a page table walk | |
1374 | which starts prior to an ASID switch but completes afterwards. This | |
1375 | can populate the micro-TLB with a stale entry which may be hit with | |
1376 | the new ASID. This workaround places two dsb instructions in the mm | |
1377 | switching code so that no page table walks can cross the ASID switch. | |
1378 | ||
5dab26af WD |
1379 | config ARM_ERRATA_754327 |
1380 | bool "ARM errata: no automatic Store Buffer drain" | |
1381 | depends on CPU_V7 && SMP | |
1382 | help | |
1383 | This option enables the workaround for the 754327 Cortex-A9 (prior to | |
1384 | r2p0) erratum. The Store Buffer does not have any automatic draining | |
1385 | mechanism and therefore a livelock may occur if an external agent | |
1386 | continuously polls a memory location waiting to observe an update. | |
1387 | This workaround defines cpu_relax() as smp_mb(), preventing correctly | |
1388 | written polling loops from denying visibility of updates to memory. | |
1389 | ||
145e10e1 CM |
1390 | config ARM_ERRATA_364296 |
1391 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" | |
1392 | depends on CPU_V6 && !SMP | |
1393 | help | |
1394 | This options enables the workaround for the 364296 ARM1136 | |
1395 | r0p2 erratum (possible cache data corruption with | |
1396 | hit-under-miss enabled). It sets the undocumented bit 31 in | |
1397 | the auxiliary control register and the FI bit in the control | |
1398 | register, thus disabling hit-under-miss without putting the | |
1399 | processor into full low interrupt latency mode. ARM11MPCore | |
1400 | is not affected. | |
1401 | ||
f630c1bd WD |
1402 | config ARM_ERRATA_764369 |
1403 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" | |
1404 | depends on CPU_V7 && SMP | |
1405 | help | |
1406 | This option enables the workaround for erratum 764369 | |
1407 | affecting Cortex-A9 MPCore with two or more processors (all | |
1408 | current revisions). Under certain timing circumstances, a data | |
1409 | cache line maintenance operation by MVA targeting an Inner | |
1410 | Shareable memory region may fail to proceed up to either the | |
1411 | Point of Coherency or to the Point of Unification of the | |
1412 | system. This workaround adds a DSB instruction before the | |
1413 | relevant cache maintenance functions and sets a specific bit | |
1414 | in the diagnostic control register of the SCU. | |
1415 | ||
11ed0ba1 WD |
1416 | config PL310_ERRATA_769419 |
1417 | bool "PL310 errata: no automatic Store Buffer drain" | |
1418 | depends on CACHE_L2X0 | |
1419 | help | |
1420 | On revisions of the PL310 prior to r3p2, the Store Buffer does | |
1421 | not automatically drain. This can cause normal, non-cacheable | |
1422 | writes to be retained when the memory system is idle, leading | |
1423 | to suboptimal I/O performance for drivers using coherent DMA. | |
1424 | This option adds a write barrier to the cpu_idle loop so that, | |
1425 | on systems with an outer cache, the store buffer is drained | |
1426 | explicitly. | |
1427 | ||
1da177e4 LT |
1428 | endmenu |
1429 | ||
1430 | source "arch/arm/common/Kconfig" | |
1431 | ||
1da177e4 LT |
1432 | menu "Bus support" |
1433 | ||
1434 | config ARM_AMBA | |
1435 | bool | |
1436 | ||
1437 | config ISA | |
1438 | bool | |
1da177e4 LT |
1439 | help |
1440 | Find out whether you have ISA slots on your motherboard. ISA is the | |
1441 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
1442 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
1443 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
1444 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
1445 | ||
065909b9 | 1446 | # Select ISA DMA controller support |
1da177e4 LT |
1447 | config ISA_DMA |
1448 | bool | |
065909b9 | 1449 | select ISA_DMA_API |
1da177e4 | 1450 | |
065909b9 | 1451 | # Select ISA DMA interface |
5cae841b AV |
1452 | config ISA_DMA_API |
1453 | bool | |
5cae841b | 1454 | |
1da177e4 | 1455 | config PCI |
0b05da72 | 1456 | bool "PCI support" if MIGHT_HAVE_PCI |
1da177e4 LT |
1457 | help |
1458 | Find out whether you have a PCI motherboard. PCI is the name of a | |
1459 | bus system, i.e. the way the CPU talks to the other stuff inside | |
1460 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
1461 | VESA. If you have PCI, say Y, otherwise N. | |
1462 | ||
52882173 AV |
1463 | config PCI_DOMAINS |
1464 | bool | |
1465 | depends on PCI | |
1466 | ||
b080ac8a MRJ |
1467 | config PCI_NANOENGINE |
1468 | bool "BSE nanoEngine PCI support" | |
1469 | depends on SA1100_NANOENGINE | |
1470 | help | |
1471 | Enable PCI on the BSE nanoEngine board. | |
1472 | ||
36e23590 MW |
1473 | config PCI_SYSCALL |
1474 | def_bool PCI | |
1475 | ||
1da177e4 LT |
1476 | # Select the host bridge type |
1477 | config PCI_HOST_VIA82C505 | |
1478 | bool | |
1479 | depends on PCI && ARCH_SHARK | |
1480 | default y | |
1481 | ||
a0113a99 MR |
1482 | config PCI_HOST_ITE8152 |
1483 | bool | |
1484 | depends on PCI && MACH_ARMCORE | |
1485 | default y | |
1486 | select DMABOUNCE | |
1487 | ||
1da177e4 LT |
1488 | source "drivers/pci/Kconfig" |
1489 | ||
1490 | source "drivers/pcmcia/Kconfig" | |
1491 | ||
1492 | endmenu | |
1493 | ||
1494 | menu "Kernel Features" | |
1495 | ||
3b55658a DM |
1496 | config HAVE_SMP |
1497 | bool | |
1498 | help | |
1499 | This option should be selected by machines which have an SMP- | |
1500 | capable CPU. | |
1501 | ||
1502 | The only effect of this option is to make the SMP-related | |
1503 | options available to the user for configuration. | |
1504 | ||
1da177e4 | 1505 | config SMP |
bb2d8130 | 1506 | bool "Symmetric Multi-Processing" |
fbb4ddac | 1507 | depends on CPU_V6K || CPU_V7 |
bc28248e | 1508 | depends on GENERIC_CLOCKEVENTS |
3b55658a | 1509 | depends on HAVE_SMP |
9934ebb8 | 1510 | depends on MMU |
f6dd9fa5 | 1511 | select USE_GENERIC_SMP_HELPERS |
89c3dedf | 1512 | select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP |
1da177e4 LT |
1513 | help |
1514 | This enables support for systems with more than one CPU. If you have | |
1515 | a system with only one CPU, like most personal computers, say N. If | |
1516 | you have a system with more than one CPU, say Y. | |
1517 | ||
1518 | If you say N here, the kernel will run on single and multiprocessor | |
1519 | machines, but will use only one CPU of a multiprocessor machine. If | |
1520 | you say Y here, the kernel will run on many, but not all, single | |
1521 | processor machines. On a single processor machine, the kernel will | |
1522 | run faster if you say N here. | |
1523 | ||
395cf969 | 1524 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
1da177e4 | 1525 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
50a23e6e | 1526 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
1da177e4 LT |
1527 | |
1528 | If you don't know what to do here, say N. | |
1529 | ||
f00ec48f RK |
1530 | config SMP_ON_UP |
1531 | bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" | |
1532 | depends on EXPERIMENTAL | |
4d2692a7 | 1533 | depends on SMP && !XIP_KERNEL |
f00ec48f RK |
1534 | default y |
1535 | help | |
1536 | SMP kernels contain instructions which fail on non-SMP processors. | |
1537 | Enabling this option allows the kernel to modify itself to make | |
1538 | these instructions safe. Disabling it allows about 1K of space | |
1539 | savings. | |
1540 | ||
1541 | If you don't know what to do here, say Y. | |
1542 | ||
c9018aab VG |
1543 | config ARM_CPU_TOPOLOGY |
1544 | bool "Support cpu topology definition" | |
1545 | depends on SMP && CPU_V7 | |
1546 | default y | |
1547 | help | |
1548 | Support ARM cpu topology definition. The MPIDR register defines | |
1549 | affinity between processors which is then used to describe the cpu | |
1550 | topology of an ARM System. | |
1551 | ||
1552 | config SCHED_MC | |
1553 | bool "Multi-core scheduler support" | |
1554 | depends on ARM_CPU_TOPOLOGY | |
1555 | help | |
1556 | Multi-core scheduler support improves the CPU scheduler's decision | |
1557 | making when dealing with multi-core CPU chips at a cost of slightly | |
1558 | increased overhead in some places. If unsure say N here. | |
1559 | ||
1560 | config SCHED_SMT | |
1561 | bool "SMT scheduler support" | |
1562 | depends on ARM_CPU_TOPOLOGY | |
1563 | help | |
1564 | Improves the CPU scheduler's decision making when dealing with | |
1565 | MultiThreading at a cost of slightly increased overhead in some | |
1566 | places. If unsure say N here. | |
1567 | ||
a8cbcd92 RK |
1568 | config HAVE_ARM_SCU |
1569 | bool | |
a8cbcd92 RK |
1570 | help |
1571 | This option enables support for the ARM system coherency unit | |
1572 | ||
022c03a2 MZ |
1573 | config ARM_ARCH_TIMER |
1574 | bool "Architected timer support" | |
1575 | depends on CPU_V7 | |
1576 | help | |
1577 | This option enables support for the ARM architected timer | |
1578 | ||
f32f4ce2 RK |
1579 | config HAVE_ARM_TWD |
1580 | bool | |
1581 | depends on SMP | |
1582 | help | |
1583 | This options enables support for the ARM timer and watchdog unit | |
1584 | ||
8d5796d2 LB |
1585 | choice |
1586 | prompt "Memory split" | |
1587 | default VMSPLIT_3G | |
1588 | help | |
1589 | Select the desired split between kernel and user memory. | |
1590 | ||
1591 | If you are not absolutely sure what you are doing, leave this | |
1592 | option alone! | |
1593 | ||
1594 | config VMSPLIT_3G | |
1595 | bool "3G/1G user/kernel split" | |
1596 | config VMSPLIT_2G | |
1597 | bool "2G/2G user/kernel split" | |
1598 | config VMSPLIT_1G | |
1599 | bool "1G/3G user/kernel split" | |
1600 | endchoice | |
1601 | ||
1602 | config PAGE_OFFSET | |
1603 | hex | |
1604 | default 0x40000000 if VMSPLIT_1G | |
1605 | default 0x80000000 if VMSPLIT_2G | |
1606 | default 0xC0000000 | |
1607 | ||
1da177e4 LT |
1608 | config NR_CPUS |
1609 | int "Maximum number of CPUs (2-32)" | |
1610 | range 2 32 | |
1611 | depends on SMP | |
1612 | default "4" | |
1613 | ||
a054a811 RK |
1614 | config HOTPLUG_CPU |
1615 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
1616 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
1617 | help | |
1618 | Say Y here to experiment with turning CPUs off and on. CPUs | |
1619 | can be controlled through /sys/devices/system/cpu. | |
1620 | ||
37ee16ae RK |
1621 | config LOCAL_TIMERS |
1622 | bool "Use local timer interrupts" | |
971acb9b | 1623 | depends on SMP |
37ee16ae | 1624 | default y |
30d8bead | 1625 | select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) |
37ee16ae RK |
1626 | help |
1627 | Enable support for local timers on SMP platforms, rather then the | |
1628 | legacy IPI broadcast method. Local timers allows the system | |
1629 | accounting to be spread across the timer interval, preventing a | |
1630 | "thundering herd" at every timer tick. | |
1631 | ||
44986ab0 PDSN |
1632 | config ARCH_NR_GPIO |
1633 | int | |
3dea19e8 | 1634 | default 1024 if ARCH_SHMOBILE || ARCH_TEGRA |
70227a45 | 1635 | default 355 if ARCH_U8500 |
9a01ec30 | 1636 | default 264 if MACH_H4700 |
39f47d9f | 1637 | default 512 if SOC_OMAP5 |
44986ab0 PDSN |
1638 | default 0 |
1639 | help | |
1640 | Maximum number of GPIOs in the system. | |
1641 | ||
1642 | If unsure, leave the default value. | |
1643 | ||
d45a398f | 1644 | source kernel/Kconfig.preempt |
1da177e4 | 1645 | |
f8065813 RK |
1646 | config HZ |
1647 | int | |
b130d5c2 | 1648 | default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ |
a73ddc61 | 1649 | ARCH_S5PV210 || ARCH_EXYNOS4 |
bfe65704 | 1650 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
5248c657 | 1651 | default AT91_TIMER_HZ if ARCH_AT91 |
5da3e714 | 1652 | default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE |
f8065813 RK |
1653 | default 100 |
1654 | ||
16c79651 | 1655 | config THUMB2_KERNEL |
4a50bfe3 | 1656 | bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" |
e399b1a4 | 1657 | depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL |
16c79651 CM |
1658 | select AEABI |
1659 | select ARM_ASM_UNIFIED | |
89bace65 | 1660 | select ARM_UNWIND |
16c79651 CM |
1661 | help |
1662 | By enabling this option, the kernel will be compiled in | |
1663 | Thumb-2 mode. A compiler/assembler that understand the unified | |
1664 | ARM-Thumb syntax is needed. | |
1665 | ||
1666 | If unsure, say N. | |
1667 | ||
6f685c5c DM |
1668 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
1669 | bool "Work around buggy Thumb-2 short branch relocations in gas" | |
1670 | depends on THUMB2_KERNEL && MODULES | |
1671 | default y | |
1672 | help | |
1673 | Various binutils versions can resolve Thumb-2 branches to | |
1674 | locally-defined, preemptible global symbols as short-range "b.n" | |
1675 | branch instructions. | |
1676 | ||
1677 | This is a problem, because there's no guarantee the final | |
1678 | destination of the symbol, or any candidate locations for a | |
1679 | trampoline, are within range of the branch. For this reason, the | |
1680 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) | |
1681 | relocation in modules at all, and it makes little sense to add | |
1682 | support. | |
1683 | ||
1684 | The symptom is that the kernel fails with an "unsupported | |
1685 | relocation" error when loading some modules. | |
1686 | ||
1687 | Until fixed tools are available, passing | |
1688 | -fno-optimize-sibling-calls to gcc should prevent gcc generating | |
1689 | code which hits this problem, at the cost of a bit of extra runtime | |
1690 | stack usage in some cases. | |
1691 | ||
1692 | The problem is described in more detail at: | |
1693 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 | |
1694 | ||
1695 | Only Thumb-2 kernels are affected. | |
1696 | ||
1697 | Unless you are sure your tools don't have this problem, say Y. | |
1698 | ||
0becb088 CM |
1699 | config ARM_ASM_UNIFIED |
1700 | bool | |
1701 | ||
704bdda0 NP |
1702 | config AEABI |
1703 | bool "Use the ARM EABI to compile the kernel" | |
1704 | help | |
1705 | This option allows for the kernel to be compiled using the latest | |
1706 | ARM ABI (aka EABI). This is only useful if you are using a user | |
1707 | space environment that is also compiled with EABI. | |
1708 | ||
1709 | Since there are major incompatibilities between the legacy ABI and | |
1710 | EABI, especially with regard to structure member alignment, this | |
1711 | option also changes the kernel syscall calling convention to | |
1712 | disambiguate both ABIs and allow for backward compatibility support | |
1713 | (selected with CONFIG_OABI_COMPAT). | |
1714 | ||
1715 | To use this you need GCC version 4.0.0 or later. | |
1716 | ||
6c90c872 | 1717 | config OABI_COMPAT |
a73a3ff1 | 1718 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
9bc433a1 | 1719 | depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL |
6c90c872 NP |
1720 | default y |
1721 | help | |
1722 | This option preserves the old syscall interface along with the | |
1723 | new (ARM EABI) one. It also provides a compatibility layer to | |
1724 | intercept syscalls that have structure arguments which layout | |
1725 | in memory differs between the legacy ABI and the new ARM EABI | |
1726 | (only for non "thumb" binaries). This option adds a tiny | |
1727 | overhead to all syscalls and produces a slightly larger kernel. | |
1728 | If you know you'll be using only pure EABI user space then you | |
1729 | can say N here. If this option is not selected and you attempt | |
1730 | to execute a legacy ABI binary then the result will be | |
1731 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
1732 | at all). If in doubt say Y. | |
1733 | ||
eb33575c | 1734 | config ARCH_HAS_HOLES_MEMORYMODEL |
e80d6a24 | 1735 | bool |
e80d6a24 | 1736 | |
05944d74 RK |
1737 | config ARCH_SPARSEMEM_ENABLE |
1738 | bool | |
1739 | ||
07a2f737 RK |
1740 | config ARCH_SPARSEMEM_DEFAULT |
1741 | def_bool ARCH_SPARSEMEM_ENABLE | |
1742 | ||
05944d74 | 1743 | config ARCH_SELECT_MEMORY_MODEL |
be370302 | 1744 | def_bool ARCH_SPARSEMEM_ENABLE |
c80d79d7 | 1745 | |
7b7bf499 WD |
1746 | config HAVE_ARCH_PFN_VALID |
1747 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM | |
1748 | ||
053a96ca | 1749 | config HIGHMEM |
e8db89a2 RK |
1750 | bool "High Memory Support" |
1751 | depends on MMU | |
053a96ca NP |
1752 | help |
1753 | The address space of ARM processors is only 4 Gigabytes large | |
1754 | and it has to accommodate user address space, kernel address | |
1755 | space as well as some memory mapped IO. That means that, if you | |
1756 | have a large amount of physical memory and/or IO, not all of the | |
1757 | memory can be "permanently mapped" by the kernel. The physical | |
1758 | memory that is not permanently mapped is called "high memory". | |
1759 | ||
1760 | Depending on the selected kernel/user memory split, minimum | |
1761 | vmalloc space and actual amount of RAM, you may not need this | |
1762 | option which should result in a slightly faster kernel. | |
1763 | ||
1764 | If unsure, say n. | |
1765 | ||
65cec8e3 RK |
1766 | config HIGHPTE |
1767 | bool "Allocate 2nd-level pagetables from highmem" | |
1768 | depends on HIGHMEM | |
65cec8e3 | 1769 | |
1b8873a0 JI |
1770 | config HW_PERF_EVENTS |
1771 | bool "Enable hardware performance counter support for perf events" | |
f0d1bc47 | 1772 | depends on PERF_EVENTS |
1b8873a0 JI |
1773 | default y |
1774 | help | |
1775 | Enable hardware performance counter support for perf events. If | |
1776 | disabled, perf events will use software events only. | |
1777 | ||
3f22ab27 DH |
1778 | source "mm/Kconfig" |
1779 | ||
c1b2d970 MD |
1780 | config FORCE_MAX_ZONEORDER |
1781 | int "Maximum zone order" if ARCH_SHMOBILE | |
1782 | range 11 64 if ARCH_SHMOBILE | |
1783 | default "9" if SA1111 | |
1784 | default "11" | |
1785 | help | |
1786 | The kernel memory allocator divides physically contiguous memory | |
1787 | blocks into "zones", where each zone is a power of two number of | |
1788 | pages. This option selects the largest power of two that the kernel | |
1789 | keeps in the memory allocator. If you need to allocate very large | |
1790 | blocks of physically contiguous memory, then you may need to | |
1791 | increase this value. | |
1792 | ||
1793 | This config option is actually maximum order plus one. For example, | |
1794 | a value of 11 means that the largest free memory block is 2^10 pages. | |
1795 | ||
1da177e4 LT |
1796 | config LEDS |
1797 | bool "Timer and CPU usage LEDs" | |
e055d5bf | 1798 | depends on ARCH_CDB89712 || ARCH_EBSA110 || \ |
8c8fdbc9 | 1799 | ARCH_EBSA285 || ARCH_INTEGRATOR || \ |
1da177e4 LT |
1800 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ |
1801 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c | 1802 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
25329671 | 1803 | ARCH_AT91 || ARCH_DAVINCI || \ |
ff3042fb | 1804 | ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW |
1da177e4 LT |
1805 | help |
1806 | If you say Y here, the LEDs on your machine will be used | |
1807 | to provide useful information about your current system status. | |
1808 | ||
1809 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
1810 | be able to select which LEDs are active using the options below. If | |
1811 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
1812 | red LED will simply flash regularly to indicate that the system is | |
1813 | still functional. It is safe to say Y here if you have a CATS | |
1814 | system, but the driver will do nothing. | |
1815 | ||
1816 | config LEDS_TIMER | |
1817 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
eebdf7d7 DB |
1818 | OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ |
1819 | || MACH_OMAP_PERSEUS2 | |
1da177e4 | 1820 | depends on LEDS |
0567a0c0 | 1821 | depends on !GENERIC_CLOCKEVENTS |
1da177e4 LT |
1822 | default y if ARCH_EBSA110 |
1823 | help | |
1824 | If you say Y here, one of the system LEDs (the green one on the | |
1825 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
1826 | will flash regularly to indicate that the system is still | |
1827 | operational. This is mainly useful to kernel hackers who are | |
1828 | debugging unstable kernels. | |
1829 | ||
1830 | The LART uses the same LED for both Timer LED and CPU usage LED | |
1831 | functions. You may choose to use both, but the Timer LED function | |
1832 | will overrule the CPU usage LED. | |
1833 | ||
1834 | config LEDS_CPU | |
1835 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
eebdf7d7 DB |
1836 | !ARCH_OMAP) \ |
1837 | || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ | |
1838 | || MACH_OMAP_PERSEUS2 | |
1da177e4 LT |
1839 | depends on LEDS |
1840 | help | |
1841 | If you say Y here, the red LED will be used to give a good real | |
1842 | time indication of CPU usage, by lighting whenever the idle task | |
1843 | is not currently executing. | |
1844 | ||
1845 | The LART uses the same LED for both Timer LED and CPU usage LED | |
1846 | functions. You may choose to use both, but the Timer LED function | |
1847 | will overrule the CPU usage LED. | |
1848 | ||
1849 | config ALIGNMENT_TRAP | |
1850 | bool | |
f12d0d7c | 1851 | depends on CPU_CP15_MMU |
1da177e4 | 1852 | default y if !ARCH_EBSA110 |
e119bfff | 1853 | select HAVE_PROC_CPU if PROC_FS |
1da177e4 | 1854 | help |
84eb8d06 | 1855 | ARM processors cannot fetch/store information which is not |
1da177e4 LT |
1856 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
1857 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
1858 | fetch/store instructions will be emulated in software if you say | |
1859 | here, which has a severe performance impact. This is necessary for | |
1860 | correct operation of some network protocols. With an IP-only | |
1861 | configuration it is safe to say N, otherwise say Y. | |
1862 | ||
39ec58f3 LB |
1863 | config UACCESS_WITH_MEMCPY |
1864 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" | |
1865 | depends on MMU && EXPERIMENTAL | |
1866 | default y if CPU_FEROCEON | |
1867 | help | |
1868 | Implement faster copy_to_user and clear_user methods for CPU | |
1869 | cores where a 8-word STM instruction give significantly higher | |
1870 | memory write throughput than a sequence of individual 32bit stores. | |
1871 | ||
1872 | A possible side effect is a slight increase in scheduling latency | |
1873 | between threads sharing the same address space if they invoke | |
1874 | such copy operations with large buffers. | |
1875 | ||
1876 | However, if the CPU data cache is using a write-allocate mode, | |
1877 | this option is unlikely to provide any performance gain. | |
1878 | ||
70c70d97 NP |
1879 | config SECCOMP |
1880 | bool | |
1881 | prompt "Enable seccomp to safely compute untrusted bytecode" | |
1882 | ---help--- | |
1883 | This kernel feature is useful for number crunching applications | |
1884 | that may need to compute untrusted bytecode during their | |
1885 | execution. By using pipes or other transports made available to | |
1886 | the process as file descriptors supporting the read/write | |
1887 | syscalls, it's possible to isolate those applications in | |
1888 | their own address space using seccomp. Once seccomp is | |
1889 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled | |
1890 | and the task is only allowed to execute a few safe syscalls | |
1891 | defined by each seccomp mode. | |
1892 | ||
c743f380 NP |
1893 | config CC_STACKPROTECTOR |
1894 | bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" | |
4a50bfe3 | 1895 | depends on EXPERIMENTAL |
c743f380 NP |
1896 | help |
1897 | This option turns on the -fstack-protector GCC feature. This | |
1898 | feature puts, at the beginning of functions, a canary value on | |
1899 | the stack just before the return address, and validates | |
1900 | the value just before actually returning. Stack based buffer | |
1901 | overflows (that need to overwrite this return address) now also | |
1902 | overwrite the canary, which gets detected and the attack is then | |
1903 | neutralized via a kernel panic. | |
1904 | This feature requires gcc version 4.2 or above. | |
1905 | ||
73a65b3f UKK |
1906 | config DEPRECATED_PARAM_STRUCT |
1907 | bool "Provide old way to pass kernel parameters" | |
1908 | help | |
1909 | This was deprecated in 2001 and announced to live on for 5 years. | |
1910 | Some old boot loaders still use this way. | |
1911 | ||
1da177e4 LT |
1912 | endmenu |
1913 | ||
1914 | menu "Boot options" | |
1915 | ||
9eb8f674 GL |
1916 | config USE_OF |
1917 | bool "Flattened Device Tree support" | |
1918 | select OF | |
1919 | select OF_EARLY_FLATTREE | |
08a543ad | 1920 | select IRQ_DOMAIN |
9eb8f674 GL |
1921 | help |
1922 | Include support for flattened device tree machine descriptions. | |
1923 | ||
1da177e4 LT |
1924 | # Compressed boot loader in ROM. Yes, we really want to ask about |
1925 | # TEXT and BSS so we preserve their values in the config files. | |
1926 | config ZBOOT_ROM_TEXT | |
1927 | hex "Compressed ROM boot loader base address" | |
1928 | default "0" | |
1929 | help | |
1930 | The physical address at which the ROM-able zImage is to be | |
1931 | placed in the target. Platforms which normally make use of | |
1932 | ROM-able zImage formats normally set this to a suitable | |
1933 | value in their defconfig file. | |
1934 | ||
1935 | If ZBOOT_ROM is not enabled, this has no effect. | |
1936 | ||
1937 | config ZBOOT_ROM_BSS | |
1938 | hex "Compressed ROM boot loader BSS address" | |
1939 | default "0" | |
1940 | help | |
f8c440b2 DF |
1941 | The base address of an area of read/write memory in the target |
1942 | for the ROM-able zImage which must be available while the | |
1943 | decompressor is running. It must be large enough to hold the | |
1944 | entire decompressed kernel plus an additional 128 KiB. | |
1945 | Platforms which normally make use of ROM-able zImage formats | |
1946 | normally set this to a suitable value in their defconfig file. | |
1da177e4 LT |
1947 | |
1948 | If ZBOOT_ROM is not enabled, this has no effect. | |
1949 | ||
1950 | config ZBOOT_ROM | |
1951 | bool "Compressed boot loader in ROM/flash" | |
1952 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
1953 | help | |
1954 | Say Y here if you intend to execute your compressed kernel image | |
1955 | (zImage) directly from ROM or flash. If unsure, say N. | |
1956 | ||
090ab3ff SH |
1957 | choice |
1958 | prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" | |
1959 | depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL | |
1960 | default ZBOOT_ROM_NONE | |
1961 | help | |
1962 | Include experimental SD/MMC loading code in the ROM-able zImage. | |
59bf8964 | 1963 | With this enabled it is possible to write the ROM-able zImage |
090ab3ff SH |
1964 | kernel image to an MMC or SD card and boot the kernel straight |
1965 | from the reset vector. At reset the processor Mask ROM will load | |
59bf8964 | 1966 | the first part of the ROM-able zImage which in turn loads the |
090ab3ff SH |
1967 | rest the kernel image to RAM. |
1968 | ||
1969 | config ZBOOT_ROM_NONE | |
1970 | bool "No SD/MMC loader in zImage (EXPERIMENTAL)" | |
1971 | help | |
1972 | Do not load image from SD or MMC | |
1973 | ||
f45b1149 SH |
1974 | config ZBOOT_ROM_MMCIF |
1975 | bool "Include MMCIF loader in zImage (EXPERIMENTAL)" | |
f45b1149 | 1976 | help |
090ab3ff SH |
1977 | Load image from MMCIF hardware block. |
1978 | ||
1979 | config ZBOOT_ROM_SH_MOBILE_SDHI | |
1980 | bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" | |
1981 | help | |
1982 | Load image from SDHI hardware block | |
1983 | ||
1984 | endchoice | |
f45b1149 | 1985 | |
e2a6a3aa JB |
1986 | config ARM_APPENDED_DTB |
1987 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" | |
1988 | depends on OF && !ZBOOT_ROM && EXPERIMENTAL | |
1989 | help | |
1990 | With this option, the boot code will look for a device tree binary | |
1991 | (DTB) appended to zImage | |
1992 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). | |
1993 | ||
1994 | This is meant as a backward compatibility convenience for those | |
1995 | systems with a bootloader that can't be upgraded to accommodate | |
1996 | the documented boot protocol using a device tree. | |
1997 | ||
1998 | Beware that there is very little in terms of protection against | |
1999 | this option being confused by leftover garbage in memory that might | |
2000 | look like a DTB header after a reboot if no actual DTB is appended | |
2001 | to zImage. Do not leave this option active in a production kernel | |
2002 | if you don't intend to always append a DTB. Proper passing of the | |
2003 | location into r2 of a bootloader provided DTB is always preferable | |
2004 | to this option. | |
2005 | ||
b90b9a38 NP |
2006 | config ARM_ATAG_DTB_COMPAT |
2007 | bool "Supplement the appended DTB with traditional ATAG information" | |
2008 | depends on ARM_APPENDED_DTB | |
2009 | help | |
2010 | Some old bootloaders can't be updated to a DTB capable one, yet | |
2011 | they provide ATAGs with memory configuration, the ramdisk address, | |
2012 | the kernel cmdline string, etc. Such information is dynamically | |
2013 | provided by the bootloader and can't always be stored in a static | |
2014 | DTB. To allow a device tree enabled kernel to be used with such | |
2015 | bootloaders, this option allows zImage to extract the information | |
2016 | from the ATAG list and store it at run time into the appended DTB. | |
2017 | ||
d0f34a11 GR |
2018 | choice |
2019 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT | |
2020 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
2021 | ||
2022 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER | |
2023 | bool "Use bootloader kernel arguments if available" | |
2024 | help | |
2025 | Uses the command-line options passed by the boot loader instead of | |
2026 | the device tree bootargs property. If the boot loader doesn't provide | |
2027 | any, the device tree bootargs property will be used. | |
2028 | ||
2029 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND | |
2030 | bool "Extend with bootloader kernel arguments" | |
2031 | help | |
2032 | The command-line arguments provided by the boot loader will be | |
2033 | appended to the the device tree bootargs property. | |
2034 | ||
2035 | endchoice | |
2036 | ||
1da177e4 LT |
2037 | config CMDLINE |
2038 | string "Default kernel command string" | |
2039 | default "" | |
2040 | help | |
2041 | On some architectures (EBSA110 and CATS), there is currently no way | |
2042 | for the boot loader to pass arguments to the kernel. For these | |
2043 | architectures, you should supply some command-line options at build | |
2044 | time by entering them here. As a minimum, you should specify the | |
2045 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
2046 | ||
4394c124 VB |
2047 | choice |
2048 | prompt "Kernel command line type" if CMDLINE != "" | |
2049 | default CMDLINE_FROM_BOOTLOADER | |
2050 | ||
2051 | config CMDLINE_FROM_BOOTLOADER | |
2052 | bool "Use bootloader kernel arguments if available" | |
2053 | help | |
2054 | Uses the command-line options passed by the boot loader. If | |
2055 | the boot loader doesn't provide any, the default kernel command | |
2056 | string provided in CMDLINE will be used. | |
2057 | ||
2058 | config CMDLINE_EXTEND | |
2059 | bool "Extend bootloader kernel arguments" | |
2060 | help | |
2061 | The command-line arguments provided by the boot loader will be | |
2062 | appended to the default kernel command string. | |
2063 | ||
92d2040d AH |
2064 | config CMDLINE_FORCE |
2065 | bool "Always use the default kernel command string" | |
92d2040d AH |
2066 | help |
2067 | Always use the default kernel command string, even if the boot | |
2068 | loader passes other arguments to the kernel. | |
2069 | This is useful if you cannot or don't want to change the | |
2070 | command-line options your boot loader passes to the kernel. | |
4394c124 | 2071 | endchoice |
92d2040d | 2072 | |
1da177e4 LT |
2073 | config XIP_KERNEL |
2074 | bool "Kernel Execute-In-Place from ROM" | |
497b7e94 | 2075 | depends on !ZBOOT_ROM && !ARM_LPAE |
1da177e4 LT |
2076 | help |
2077 | Execute-In-Place allows the kernel to run from non-volatile storage | |
2078 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
2079 | space since the text section of the kernel is not loaded from flash | |
2080 | to RAM. Read-write sections, such as the data section and stack, | |
2081 | are still copied to RAM. The XIP kernel is not compressed since | |
2082 | it has to run directly from flash, so it will take more space to | |
2083 | store it. The flash address used to link the kernel object files, | |
2084 | and for storing it, is configuration dependent. Therefore, if you | |
2085 | say Y here, you must know the proper physical address where to | |
2086 | store the kernel image depending on your own flash memory usage. | |
2087 | ||
2088 | Also note that the make target becomes "make xipImage" rather than | |
2089 | "make zImage" or "make Image". The final kernel binary to put in | |
2090 | ROM memory will be arch/arm/boot/xipImage. | |
2091 | ||
2092 | If unsure, say N. | |
2093 | ||
2094 | config XIP_PHYS_ADDR | |
2095 | hex "XIP Kernel Physical Location" | |
2096 | depends on XIP_KERNEL | |
2097 | default "0x00080000" | |
2098 | help | |
2099 | This is the physical address in your flash memory the kernel will | |
2100 | be linked for and stored to. This address is dependent on your | |
2101 | own flash usage. | |
2102 | ||
c587e4a6 RP |
2103 | config KEXEC |
2104 | bool "Kexec system call (EXPERIMENTAL)" | |
02b73e2e | 2105 | depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) |
c587e4a6 RP |
2106 | help |
2107 | kexec is a system call that implements the ability to shutdown your | |
2108 | current kernel, and to start another kernel. It is like a reboot | |
01dd2fbf | 2109 | but it is independent of the system firmware. And like a reboot |
c587e4a6 RP |
2110 | you can start any kernel with it, not just Linux. |
2111 | ||
2112 | It is an ongoing process to be certain the hardware in a machine | |
2113 | is properly shutdown, so do not be surprised if this code does not | |
2114 | initially work for you. It may help to enable device hotplugging | |
2115 | support. | |
2116 | ||
4cd9d6f7 RP |
2117 | config ATAGS_PROC |
2118 | bool "Export atags in procfs" | |
b98d7291 UL |
2119 | depends on KEXEC |
2120 | default y | |
4cd9d6f7 RP |
2121 | help |
2122 | Should the atags used to boot the kernel be exported in an "atags" | |
2123 | file in procfs. Useful with kexec. | |
2124 | ||
cb5d39b3 MW |
2125 | config CRASH_DUMP |
2126 | bool "Build kdump crash kernel (EXPERIMENTAL)" | |
2127 | depends on EXPERIMENTAL | |
2128 | help | |
2129 | Generate crash dump after being started by kexec. This should | |
2130 | be normally only set in special crash dump kernels which are | |
2131 | loaded in the main kernel with kexec-tools into a specially | |
2132 | reserved region and then later executed after a crash by | |
2133 | kdump/kexec. The crash dump kernel must be compiled to a | |
2134 | memory address not used by the main kernel | |
2135 | ||
2136 | For more details see Documentation/kdump/kdump.txt | |
2137 | ||
e69edc79 EM |
2138 | config AUTO_ZRELADDR |
2139 | bool "Auto calculation of the decompressed kernel image address" | |
2140 | depends on !ZBOOT_ROM && !ARCH_U300 | |
2141 | help | |
2142 | ZRELADDR is the physical address where the decompressed kernel | |
2143 | image will be placed. If AUTO_ZRELADDR is selected, the address | |
2144 | will be determined at run-time by masking the current IP with | |
2145 | 0xf8000000. This assumes the zImage being placed in the first 128MB | |
2146 | from start of memory. | |
2147 | ||
1da177e4 LT |
2148 | endmenu |
2149 | ||
ac9d7efc | 2150 | menu "CPU Power Management" |
1da177e4 | 2151 | |
89c52ed4 | 2152 | if ARCH_HAS_CPUFREQ |
1da177e4 LT |
2153 | |
2154 | source "drivers/cpufreq/Kconfig" | |
2155 | ||
64f102b6 YS |
2156 | config CPU_FREQ_IMX |
2157 | tristate "CPUfreq driver for i.MX CPUs" | |
2158 | depends on ARCH_MXC && CPU_FREQ | |
f637c4c9 | 2159 | select CPU_FREQ_TABLE |
64f102b6 YS |
2160 | help |
2161 | This enables the CPUfreq driver for i.MX CPUs. | |
2162 | ||
1da177e4 LT |
2163 | config CPU_FREQ_SA1100 |
2164 | bool | |
1da177e4 LT |
2165 | |
2166 | config CPU_FREQ_SA1110 | |
2167 | bool | |
1da177e4 LT |
2168 | |
2169 | config CPU_FREQ_INTEGRATOR | |
2170 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
2171 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
2172 | default y | |
2173 | help | |
2174 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
2175 | ||
2176 | For details, take a look at <file:Documentation/cpu-freq>. | |
2177 | ||
2178 | If in doubt, say Y. | |
2179 | ||
9e2697ff RK |
2180 | config CPU_FREQ_PXA |
2181 | bool | |
2182 | depends on CPU_FREQ && ARCH_PXA && PXA25x | |
2183 | default y | |
ca7d156e | 2184 | select CPU_FREQ_TABLE |
9e2697ff RK |
2185 | select CPU_FREQ_DEFAULT_GOV_USERSPACE |
2186 | ||
9d56c02a BD |
2187 | config CPU_FREQ_S3C |
2188 | bool | |
2189 | help | |
2190 | Internal configuration node for common cpufreq on Samsung SoC | |
2191 | ||
2192 | config CPU_FREQ_S3C24XX | |
4a50bfe3 | 2193 | bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" |
b130d5c2 | 2194 | depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL |
9d56c02a BD |
2195 | select CPU_FREQ_S3C |
2196 | help | |
2197 | This enables the CPUfreq driver for the Samsung S3C24XX family | |
2198 | of CPUs. | |
2199 | ||
2200 | For details, take a look at <file:Documentation/cpu-freq>. | |
2201 | ||
2202 | If in doubt, say N. | |
2203 | ||
2204 | config CPU_FREQ_S3C24XX_PLL | |
4a50bfe3 | 2205 | bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" |
9d56c02a BD |
2206 | depends on CPU_FREQ_S3C24XX && EXPERIMENTAL |
2207 | help | |
2208 | Compile in support for changing the PLL frequency from the | |
2209 | S3C24XX series CPUfreq driver. The PLL takes time to settle | |
2210 | after a frequency change, so by default it is not enabled. | |
2211 | ||
2212 | This also means that the PLL tables for the selected CPU(s) will | |
2213 | be built which may increase the size of the kernel image. | |
2214 | ||
2215 | config CPU_FREQ_S3C24XX_DEBUG | |
2216 | bool "Debug CPUfreq Samsung driver core" | |
2217 | depends on CPU_FREQ_S3C24XX | |
2218 | help | |
2219 | Enable s3c_freq_dbg for the Samsung S3C CPUfreq core | |
2220 | ||
2221 | config CPU_FREQ_S3C24XX_IODEBUG | |
2222 | bool "Debug CPUfreq Samsung driver IO timing" | |
2223 | depends on CPU_FREQ_S3C24XX | |
2224 | help | |
2225 | Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core | |
2226 | ||
e6d197a6 BD |
2227 | config CPU_FREQ_S3C24XX_DEBUGFS |
2228 | bool "Export debugfs for CPUFreq" | |
2229 | depends on CPU_FREQ_S3C24XX && DEBUG_FS | |
2230 | help | |
2231 | Export status information via debugfs. | |
2232 | ||
1da177e4 LT |
2233 | endif |
2234 | ||
ac9d7efc RK |
2235 | source "drivers/cpuidle/Kconfig" |
2236 | ||
2237 | endmenu | |
2238 | ||
1da177e4 LT |
2239 | menu "Floating point emulation" |
2240 | ||
2241 | comment "At least one emulation must be selected" | |
2242 | ||
2243 | config FPE_NWFPE | |
2244 | bool "NWFPE math emulation" | |
593c252a | 2245 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
1da177e4 LT |
2246 | ---help--- |
2247 | Say Y to include the NWFPE floating point emulator in the kernel. | |
2248 | This is necessary to run most binaries. Linux does not currently | |
2249 | support floating point hardware so you need to say Y here even if | |
2250 | your machine has an FPA or floating point co-processor podule. | |
2251 | ||
2252 | You may say N here if you are going to load the Acorn FPEmulator | |
2253 | early in the bootup. | |
2254 | ||
2255 | config FPE_NWFPE_XP | |
2256 | bool "Support extended precision" | |
bedf142b | 2257 | depends on FPE_NWFPE |
1da177e4 LT |
2258 | help |
2259 | Say Y to include 80-bit support in the kernel floating-point | |
2260 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
2261 | Note that gcc does not generate 80-bit operations by default, | |
2262 | so in most cases this option only enlarges the size of the | |
2263 | floating point emulator without any good reason. | |
2264 | ||
2265 | You almost surely want to say N here. | |
2266 | ||
2267 | config FPE_FASTFPE | |
2268 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 2269 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
2270 | ---help--- |
2271 | Say Y here to include the FAST floating point emulator in the kernel. | |
2272 | This is an experimental much faster emulator which now also has full | |
2273 | precision for the mantissa. It does not support any exceptions. | |
2274 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
2275 | ||
2276 | It should be sufficient for most programs. It may be not suitable | |
2277 | for scientific calculations, but you have to check this for yourself. | |
2278 | If you do not feel you need a faster FP emulation you should better | |
2279 | choose NWFPE. | |
2280 | ||
2281 | config VFP | |
2282 | bool "VFP-format floating point maths" | |
e399b1a4 | 2283 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
1da177e4 LT |
2284 | help |
2285 | Say Y to include VFP support code in the kernel. This is needed | |
2286 | if your hardware includes a VFP unit. | |
2287 | ||
2288 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
2289 | release notes and additional status information. | |
2290 | ||
2291 | Say N if your target does not have VFP hardware. | |
2292 | ||
25ebee02 CM |
2293 | config VFPv3 |
2294 | bool | |
2295 | depends on VFP | |
2296 | default y if CPU_V7 | |
2297 | ||
b5872db4 CM |
2298 | config NEON |
2299 | bool "Advanced SIMD (NEON) Extension support" | |
2300 | depends on VFPv3 && CPU_V7 | |
2301 | help | |
2302 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD | |
2303 | Extension. | |
2304 | ||
1da177e4 LT |
2305 | endmenu |
2306 | ||
2307 | menu "Userspace binary formats" | |
2308 | ||
2309 | source "fs/Kconfig.binfmt" | |
2310 | ||
2311 | config ARTHUR | |
2312 | tristate "RISC OS personality" | |
704bdda0 | 2313 | depends on !AEABI |
1da177e4 LT |
2314 | help |
2315 | Say Y here to include the kernel code necessary if you want to run | |
2316 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
2317 | experimental; if this sounds frightening, say N and sleep in peace. | |
2318 | You can also say M here to compile this support as a module (which | |
2319 | will be called arthur). | |
2320 | ||
2321 | endmenu | |
2322 | ||
2323 | menu "Power management options" | |
2324 | ||
eceab4ac | 2325 | source "kernel/power/Kconfig" |
1da177e4 | 2326 | |
f4cb5700 | 2327 | config ARCH_SUSPEND_POSSIBLE |
3d5e8af4 | 2328 | depends on !ARCH_S5PC100 && !ARCH_TEGRA |
6a786182 | 2329 | depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ |
3f5d0819 | 2330 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
f4cb5700 JB |
2331 | def_bool y |
2332 | ||
15e0d9e3 AB |
2333 | config ARM_CPU_SUSPEND |
2334 | def_bool PM_SLEEP | |
2335 | ||
1da177e4 LT |
2336 | endmenu |
2337 | ||
d5950b43 SR |
2338 | source "net/Kconfig" |
2339 | ||
ac25150f | 2340 | source "drivers/Kconfig" |
1da177e4 LT |
2341 | |
2342 | source "fs/Kconfig" | |
2343 | ||
1da177e4 LT |
2344 | source "arch/arm/Kconfig.debug" |
2345 | ||
2346 | source "security/Kconfig" | |
2347 | ||
2348 | source "crypto/Kconfig" | |
2349 | ||
2350 | source "lib/Kconfig" |