Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # For a description of the syntax of this configuration file, | |
3 | # see Documentation/kbuild/kconfig-language.txt. | |
4 | # | |
5 | ||
6 | mainmenu "Linux Kernel Configuration" | |
7 | ||
8 | config ARM | |
9 | bool | |
10 | default y | |
11 | help | |
12 | The ARM series is a line of low-power-consumption RISC chip designs | |
f6c8965a | 13 | licensed by ARM Ltd and targeted at embedded applications and |
1da177e4 | 14 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
f6c8965a | 15 | manufactured, but legacy ARM-based PC hardware remains popular in |
1da177e4 LT |
16 | Europe. There is an ARM Linux project with a web page at |
17 | <http://www.arm.linux.org.uk/>. | |
18 | ||
19 | config MMU | |
20 | bool | |
21 | default y | |
22 | ||
23 | config EISA | |
24 | bool | |
25 | ---help--- | |
26 | The Extended Industry Standard Architecture (EISA) bus was | |
27 | developed as an open alternative to the IBM MicroChannel bus. | |
28 | ||
29 | The EISA bus provided some of the features of the IBM MicroChannel | |
30 | bus while maintaining backward compatibility with cards made for | |
31 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
32 | 1995 when it was made obsolete by the PCI bus. | |
33 | ||
34 | Say Y here if you are building a kernel for an EISA-based machine. | |
35 | ||
36 | Otherwise, say N. | |
37 | ||
38 | config SBUS | |
39 | bool | |
40 | ||
41 | config MCA | |
42 | bool | |
43 | help | |
44 | MicroChannel Architecture is found in some IBM PS/2 machines and | |
45 | laptops. It is a bus system similar to PCI or ISA. See | |
46 | <file:Documentation/mca.txt> (and especially the web page given | |
47 | there) before attempting to build an MCA bus kernel. | |
48 | ||
1da177e4 LT |
49 | config RWSEM_GENERIC_SPINLOCK |
50 | bool | |
51 | default y | |
52 | ||
53 | config RWSEM_XCHGADD_ALGORITHM | |
54 | bool | |
55 | ||
b89c3b16 AM |
56 | config GENERIC_HWEIGHT |
57 | bool | |
58 | default y | |
59 | ||
1da177e4 LT |
60 | config GENERIC_CALIBRATE_DELAY |
61 | bool | |
62 | default y | |
63 | ||
64 | config GENERIC_BUST_SPINLOCK | |
65 | bool | |
66 | ||
a08b6b79 Z |
67 | config ARCH_MAY_HAVE_PC_FDC |
68 | bool | |
69 | ||
1da177e4 LT |
70 | config GENERIC_ISA_DMA |
71 | bool | |
72 | ||
1da177e4 LT |
73 | config FIQ |
74 | bool | |
75 | ||
034d2f5a AV |
76 | config ARCH_MTD_XIP |
77 | bool | |
78 | ||
1da177e4 LT |
79 | source "init/Kconfig" |
80 | ||
81 | menu "System Type" | |
82 | ||
83 | choice | |
84 | prompt "ARM system type" | |
6a0e2430 | 85 | default ARCH_VERSATILE |
1da177e4 LT |
86 | |
87 | config ARCH_CLPS7500 | |
88 | bool "Cirrus-CL-PS7500FE" | |
89 | select TIMER_ACORN | |
f7e68bbf | 90 | select ISA |
f999b8bd MM |
91 | help |
92 | Support for the Cirrus Logic PS7500FE system-on-a-chip. | |
1da177e4 LT |
93 | |
94 | config ARCH_CLPS711X | |
95 | bool "CLPS711x/EP721x-based" | |
f999b8bd MM |
96 | help |
97 | Support for Cirrus Logic 711x/721x based boards. | |
1da177e4 LT |
98 | |
99 | config ARCH_CO285 | |
100 | bool "Co-EBSA285" | |
101 | select FOOTBRIDGE | |
102 | select FOOTBRIDGE_ADDIN | |
f999b8bd MM |
103 | help |
104 | Support for Intel's EBSA285 companion chip. | |
1da177e4 LT |
105 | |
106 | config ARCH_EBSA110 | |
107 | bool "EBSA-110" | |
f7e68bbf | 108 | select ISA |
1da177e4 LT |
109 | help |
110 | This is an evaluation board for the StrongARM processor available | |
f6c8965a | 111 | from Digital. It has limited hardware on-board, including an |
1da177e4 LT |
112 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
113 | parallel port. | |
114 | ||
e7736d47 LB |
115 | config ARCH_EP93XX |
116 | bool "EP93xx-based" | |
117 | select ARM_AMBA | |
118 | select ARM_VIC | |
119 | help | |
120 | This enables support for the Cirrus EP93xx series of CPUs. | |
121 | ||
1da177e4 LT |
122 | config ARCH_FOOTBRIDGE |
123 | bool "FootBridge" | |
124 | select FOOTBRIDGE | |
f999b8bd MM |
125 | help |
126 | Support for systems based on the DC21285 companion chip | |
127 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. | |
1da177e4 LT |
128 | |
129 | config ARCH_INTEGRATOR | |
130 | bool "Integrator" | |
131 | select ARM_AMBA | |
132 | select ICST525 | |
f999b8bd MM |
133 | help |
134 | Support for ARM's Integrator platform. | |
1da177e4 LT |
135 | |
136 | config ARCH_IOP3XX | |
137 | bool "IOP3xx-based" | |
f7e68bbf | 138 | select PCI |
f999b8bd MM |
139 | help |
140 | Support for Intel's IOP3XX (XScale) family of processors. | |
1da177e4 LT |
141 | |
142 | config ARCH_IXP4XX | |
143 | bool "IXP4xx-based" | |
144 | select DMABOUNCE | |
f7e68bbf | 145 | select PCI |
f999b8bd MM |
146 | help |
147 | Support for Intel's IXP4XX (XScale) family of processors. | |
1da177e4 LT |
148 | |
149 | config ARCH_IXP2000 | |
150 | bool "IXP2400/2800-based" | |
f7e68bbf | 151 | select PCI |
f999b8bd MM |
152 | help |
153 | Support for Intel's IXP2400/2800 (XScale) family of processors. | |
1da177e4 LT |
154 | |
155 | config ARCH_L7200 | |
156 | bool "LinkUp-L7200" | |
157 | select FIQ | |
158 | help | |
159 | Say Y here if you intend to run this kernel on a LinkUp Systems | |
160 | L7200 Software Development Board which uses an ARM720T processor. | |
161 | Information on this board can be obtained at: | |
162 | ||
163 | <http://www.linkupsys.com/> | |
164 | ||
165 | If you have any questions or comments about the Linux kernel port | |
166 | to this board, send e-mail to <sjhill@cotw.com>. | |
167 | ||
168 | config ARCH_PXA | |
169 | bool "PXA2xx-based" | |
034d2f5a | 170 | select ARCH_MTD_XIP |
f999b8bd MM |
171 | help |
172 | Support for Intel's PXA2XX processor line. | |
1da177e4 LT |
173 | |
174 | config ARCH_RPC | |
175 | bool "RiscPC" | |
176 | select ARCH_ACORN | |
177 | select FIQ | |
178 | select TIMER_ACORN | |
a08b6b79 | 179 | select ARCH_MAY_HAVE_PC_FDC |
065909b9 | 180 | select ISA_DMA_API |
1da177e4 LT |
181 | help |
182 | On the Acorn Risc-PC, Linux can support the internal IDE disk and | |
183 | CD-ROM interface, serial and parallel port, and the floppy drive. | |
184 | ||
185 | config ARCH_SA1100 | |
186 | bool "SA1100-based" | |
f7e68bbf | 187 | select ISA |
3cd9e19e | 188 | select ARCH_DISCONTIGMEM_ENABLE |
034d2f5a | 189 | select ARCH_MTD_XIP |
f999b8bd MM |
190 | help |
191 | Support for StrongARM 11x0 based boards. | |
1da177e4 LT |
192 | |
193 | config ARCH_S3C2410 | |
194 | bool "Samsung S3C2410" | |
195 | help | |
196 | Samsung S3C2410X CPU based systems, such as the Simtec Electronics | |
197 | BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or | |
f6c8965a | 198 | the Samsung SMDK2410 development board (and derivatives). |
1da177e4 LT |
199 | |
200 | config ARCH_SHARK | |
201 | bool "Shark" | |
f7e68bbf RK |
202 | select ISA |
203 | select ISA_DMA | |
204 | select PCI | |
f999b8bd MM |
205 | help |
206 | Support for the StrongARM based Digital DNARD machine, also known | |
207 | as "Shark" (<http://www.shark-linux.de/shark.html>). | |
1da177e4 LT |
208 | |
209 | config ARCH_LH7A40X | |
210 | bool "Sharp LH7A40X" | |
211 | help | |
212 | Say Y here for systems based on one of the Sharp LH7A40X | |
213 | System on a Chip processors. These CPUs include an ARM922T | |
214 | core with a wide array of integrated devices for | |
215 | hand-held and low-power applications. | |
216 | ||
217 | config ARCH_OMAP | |
218 | bool "TI OMAP" | |
f999b8bd MM |
219 | help |
220 | Support for TI's OMAP platform (OMAP1 and OMAP2). | |
1da177e4 LT |
221 | |
222 | config ARCH_VERSATILE | |
223 | bool "Versatile" | |
224 | select ARM_AMBA | |
fa0fe48f | 225 | select ARM_VIC |
1da177e4 LT |
226 | select ICST307 |
227 | help | |
228 | This enables support for ARM Ltd Versatile board. | |
229 | ||
8ad68bbf CM |
230 | config ARCH_REALVIEW |
231 | bool "RealView" | |
232 | select ARM_AMBA | |
233 | select ICST307 | |
234 | help | |
235 | This enables support for ARM Ltd RealView boards. | |
236 | ||
1da177e4 LT |
237 | config ARCH_IMX |
238 | bool "IMX" | |
f999b8bd MM |
239 | help |
240 | Support for Motorola's i.MX family of processors (MX1, MXL). | |
1da177e4 LT |
241 | |
242 | config ARCH_H720X | |
243 | bool "Hynix-HMS720x-based" | |
065909b9 | 244 | select ISA_DMA_API |
1da177e4 LT |
245 | help |
246 | This enables support for systems based on the Hynix HMS720x | |
247 | ||
038c5b60 BN |
248 | config ARCH_AAEC2000 |
249 | bool "Agilent AAEC-2000 based" | |
049eb329 | 250 | select ARM_AMBA |
038c5b60 BN |
251 | help |
252 | This enables support for systems based on the Agilent AAEC-2000 | |
253 | ||
73a59c1c SP |
254 | config ARCH_AT91RM9200 |
255 | bool "AT91RM9200" | |
256 | help | |
f999b8bd MM |
257 | Say Y here if you intend to run this kernel on an Atmel |
258 | AT91RM9200-based board. | |
73a59c1c | 259 | |
1da177e4 LT |
260 | endchoice |
261 | ||
262 | source "arch/arm/mach-clps711x/Kconfig" | |
263 | ||
e7736d47 LB |
264 | source "arch/arm/mach-ep93xx/Kconfig" |
265 | ||
1da177e4 LT |
266 | source "arch/arm/mach-footbridge/Kconfig" |
267 | ||
268 | source "arch/arm/mach-integrator/Kconfig" | |
269 | ||
270 | source "arch/arm/mach-iop3xx/Kconfig" | |
271 | ||
272 | source "arch/arm/mach-ixp4xx/Kconfig" | |
273 | ||
274 | source "arch/arm/mach-ixp2000/Kconfig" | |
275 | ||
276 | source "arch/arm/mach-pxa/Kconfig" | |
277 | ||
278 | source "arch/arm/mach-sa1100/Kconfig" | |
279 | ||
d48af15e TL |
280 | source "arch/arm/plat-omap/Kconfig" |
281 | ||
282 | source "arch/arm/mach-omap1/Kconfig" | |
1da177e4 | 283 | |
1dbae815 TL |
284 | source "arch/arm/mach-omap2/Kconfig" |
285 | ||
1da177e4 LT |
286 | source "arch/arm/mach-s3c2410/Kconfig" |
287 | ||
288 | source "arch/arm/mach-lh7a40x/Kconfig" | |
289 | ||
290 | source "arch/arm/mach-imx/Kconfig" | |
291 | ||
292 | source "arch/arm/mach-h720x/Kconfig" | |
293 | ||
294 | source "arch/arm/mach-versatile/Kconfig" | |
295 | ||
038c5b60 BN |
296 | source "arch/arm/mach-aaec2000/Kconfig" |
297 | ||
8ad68bbf CM |
298 | source "arch/arm/mach-realview/Kconfig" |
299 | ||
73a59c1c SP |
300 | source "arch/arm/mach-at91rm9200/Kconfig" |
301 | ||
1da177e4 LT |
302 | # Definitions to make life easier |
303 | config ARCH_ACORN | |
304 | bool | |
305 | ||
306 | source arch/arm/mm/Kconfig | |
307 | ||
308 | # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER | |
309 | config XSCALE_PMU | |
310 | bool | |
311 | depends on CPU_XSCALE && !XSCALE_PMU_TIMER | |
312 | default y | |
313 | ||
314 | endmenu | |
315 | ||
316 | source "arch/arm/common/Kconfig" | |
317 | ||
318 | config FORCE_MAX_ZONEORDER | |
319 | int | |
320 | depends on SA1111 | |
321 | default "9" | |
322 | ||
323 | menu "Bus support" | |
324 | ||
325 | config ARM_AMBA | |
326 | bool | |
327 | ||
328 | config ISA | |
329 | bool | |
1da177e4 LT |
330 | help |
331 | Find out whether you have ISA slots on your motherboard. ISA is the | |
332 | name of a bus system, i.e. the way the CPU talks to the other stuff | |
333 | inside your box. Other bus systems are PCI, EISA, MicroChannel | |
334 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; | |
335 | newer boards don't support it. If you have ISA, say Y, otherwise N. | |
336 | ||
065909b9 | 337 | # Select ISA DMA controller support |
1da177e4 LT |
338 | config ISA_DMA |
339 | bool | |
065909b9 | 340 | select ISA_DMA_API |
1da177e4 | 341 | |
065909b9 | 342 | # Select ISA DMA interface |
5cae841b AV |
343 | config ISA_DMA_API |
344 | bool | |
5cae841b | 345 | |
1da177e4 | 346 | config PCI |
c0da085a | 347 | bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB |
1da177e4 LT |
348 | help |
349 | Find out whether you have a PCI motherboard. PCI is the name of a | |
350 | bus system, i.e. the way the CPU talks to the other stuff inside | |
351 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
352 | VESA. If you have PCI, say Y, otherwise N. | |
353 | ||
354 | The PCI-HOWTO, available from | |
355 | <http://www.tldp.org/docs.html#howto>, contains valuable | |
356 | information about which PCI hardware does work under Linux and which | |
357 | doesn't. | |
358 | ||
359 | # Select the host bridge type | |
360 | config PCI_HOST_VIA82C505 | |
361 | bool | |
362 | depends on PCI && ARCH_SHARK | |
363 | default y | |
364 | ||
365 | source "drivers/pci/Kconfig" | |
366 | ||
367 | source "drivers/pcmcia/Kconfig" | |
368 | ||
369 | endmenu | |
370 | ||
371 | menu "Kernel Features" | |
372 | ||
373 | config SMP | |
374 | bool "Symmetric Multi-Processing (EXPERIMENTAL)" | |
f6db449c | 375 | depends on EXPERIMENTAL && REALVIEW_MPCORE |
1da177e4 LT |
376 | help |
377 | This enables support for systems with more than one CPU. If you have | |
378 | a system with only one CPU, like most personal computers, say N. If | |
379 | you have a system with more than one CPU, say Y. | |
380 | ||
381 | If you say N here, the kernel will run on single and multiprocessor | |
382 | machines, but will use only one CPU of a multiprocessor machine. If | |
383 | you say Y here, the kernel will run on many, but not all, single | |
384 | processor machines. On a single processor machine, the kernel will | |
385 | run faster if you say N here. | |
386 | ||
12c62c2e AO |
387 | See also the <file:Documentation/smp.txt>, |
388 | <file:Documentation/i386/IO-APIC.txt>, | |
1da177e4 LT |
389 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
390 | <http://www.linuxdoc.org/docs.html#howto>. | |
391 | ||
392 | If you don't know what to do here, say N. | |
393 | ||
394 | config NR_CPUS | |
395 | int "Maximum number of CPUs (2-32)" | |
396 | range 2 32 | |
397 | depends on SMP | |
398 | default "4" | |
399 | ||
a054a811 RK |
400 | config HOTPLUG_CPU |
401 | bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" | |
402 | depends on SMP && HOTPLUG && EXPERIMENTAL | |
403 | help | |
404 | Say Y here to experiment with turning CPUs off and on. CPUs | |
405 | can be controlled through /sys/devices/system/cpu. | |
406 | ||
37ee16ae RK |
407 | config LOCAL_TIMERS |
408 | bool "Use local timer interrupts" | |
2a98beb6 | 409 | depends on SMP && REALVIEW_MPCORE |
37ee16ae RK |
410 | default y |
411 | help | |
412 | Enable support for local timers on SMP platforms, rather then the | |
413 | legacy IPI broadcast method. Local timers allows the system | |
414 | accounting to be spread across the timer interval, preventing a | |
415 | "thundering herd" at every timer tick. | |
416 | ||
1da177e4 LT |
417 | config PREEMPT |
418 | bool "Preemptible Kernel (EXPERIMENTAL)" | |
419 | depends on EXPERIMENTAL | |
420 | help | |
421 | This option reduces the latency of the kernel when reacting to | |
422 | real-time or interactive events by allowing a low priority process to | |
423 | be preempted even if it is in kernel mode executing a system call. | |
424 | This allows applications to run more reliably even when the system is | |
425 | under load. | |
426 | ||
427 | Say Y here if you are building a kernel for a desktop, embedded | |
428 | or real-time system. Say N if you are unsure. | |
429 | ||
8749af68 RK |
430 | config NO_IDLE_HZ |
431 | bool "Dynamic tick timer" | |
432 | help | |
433 | Select this option if you want to disable continuous timer ticks | |
434 | and have them programmed to occur as required. This option saves | |
435 | power as the system can remain in idle state for longer. | |
436 | ||
437 | By default dynamic tick is disabled during the boot, and can be | |
438 | manually enabled with: | |
439 | ||
440 | echo 1 > /sys/devices/system/timer/timer0/dyn_tick | |
441 | ||
442 | Alternatively, if you want dynamic tick automatically enabled | |
443 | during boot, pass "dyntick=enable" via the kernel command string. | |
444 | ||
f2be64b3 TL |
445 | Please note that dynamic tick may affect the accuracy of |
446 | timekeeping on some platforms depending on the implementation. | |
569d2c34 NP |
447 | Currently at least OMAP, PXA2xx and SA11x0 platforms are known |
448 | to have accurate timekeeping with dynamic tick. | |
f2be64b3 | 449 | |
f8065813 RK |
450 | config HZ |
451 | int | |
452 | default 128 if ARCH_L7200 | |
453 | default 200 if ARCH_EBSA110 || ARCH_S3C2410 | |
bfe65704 | 454 | default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER |
f8065813 RK |
455 | default 100 |
456 | ||
704bdda0 NP |
457 | config AEABI |
458 | bool "Use the ARM EABI to compile the kernel" | |
459 | help | |
460 | This option allows for the kernel to be compiled using the latest | |
461 | ARM ABI (aka EABI). This is only useful if you are using a user | |
462 | space environment that is also compiled with EABI. | |
463 | ||
464 | Since there are major incompatibilities between the legacy ABI and | |
465 | EABI, especially with regard to structure member alignment, this | |
466 | option also changes the kernel syscall calling convention to | |
467 | disambiguate both ABIs and allow for backward compatibility support | |
468 | (selected with CONFIG_OABI_COMPAT). | |
469 | ||
470 | To use this you need GCC version 4.0.0 or later. | |
471 | ||
6c90c872 | 472 | config OABI_COMPAT |
a73a3ff1 | 473 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
61c484d4 | 474 | depends on AEABI && EXPERIMENTAL |
6c90c872 NP |
475 | default y |
476 | help | |
477 | This option preserves the old syscall interface along with the | |
478 | new (ARM EABI) one. It also provides a compatibility layer to | |
479 | intercept syscalls that have structure arguments which layout | |
480 | in memory differs between the legacy ABI and the new ARM EABI | |
481 | (only for non "thumb" binaries). This option adds a tiny | |
482 | overhead to all syscalls and produces a slightly larger kernel. | |
483 | If you know you'll be using only pure EABI user space then you | |
484 | can say N here. If this option is not selected and you attempt | |
485 | to execute a legacy ABI binary then the result will be | |
486 | UNPREDICTABLE (in fact it can be predicted that it won't work | |
487 | at all). If in doubt say Y. | |
488 | ||
3f22ab27 | 489 | config ARCH_DISCONTIGMEM_ENABLE |
1da177e4 | 490 | bool |
f7e68bbf | 491 | default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) |
1da177e4 LT |
492 | help |
493 | Say Y to support efficient handling of discontiguous physical memory, | |
494 | for architectures which are either NUMA (Non-Uniform Memory Access) | |
495 | or have huge holes in the physical address space for other reasons. | |
496 | See <file:Documentation/vm/numa> for more. | |
497 | ||
3f22ab27 DH |
498 | source "mm/Kconfig" |
499 | ||
1da177e4 LT |
500 | config LEDS |
501 | bool "Timer and CPU usage LEDs" | |
502 | depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ | |
503 | ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ | |
504 | ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ | |
505 | ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ | |
73a59c1c SP |
506 | ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ |
507 | ARCH_AT91RM9200 | |
1da177e4 LT |
508 | help |
509 | If you say Y here, the LEDs on your machine will be used | |
510 | to provide useful information about your current system status. | |
511 | ||
512 | If you are compiling a kernel for a NetWinder or EBSA-285, you will | |
513 | be able to select which LEDs are active using the options below. If | |
514 | you are compiling a kernel for the EBSA-110 or the LART however, the | |
515 | red LED will simply flash regularly to indicate that the system is | |
516 | still functional. It is safe to say Y here if you have a CATS | |
517 | system, but the driver will do nothing. | |
518 | ||
519 | config LEDS_TIMER | |
520 | bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ | |
521 | MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 | |
522 | depends on LEDS | |
523 | default y if ARCH_EBSA110 | |
524 | help | |
525 | If you say Y here, one of the system LEDs (the green one on the | |
526 | NetWinder, the amber one on the EBSA285, or the red one on the LART) | |
527 | will flash regularly to indicate that the system is still | |
528 | operational. This is mainly useful to kernel hackers who are | |
529 | debugging unstable kernels. | |
530 | ||
531 | The LART uses the same LED for both Timer LED and CPU usage LED | |
532 | functions. You may choose to use both, but the Timer LED function | |
533 | will overrule the CPU usage LED. | |
534 | ||
535 | config LEDS_CPU | |
536 | bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ | |
537 | !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 | |
538 | depends on LEDS | |
539 | help | |
540 | If you say Y here, the red LED will be used to give a good real | |
541 | time indication of CPU usage, by lighting whenever the idle task | |
542 | is not currently executing. | |
543 | ||
544 | The LART uses the same LED for both Timer LED and CPU usage LED | |
545 | functions. You may choose to use both, but the Timer LED function | |
546 | will overrule the CPU usage LED. | |
547 | ||
548 | config ALIGNMENT_TRAP | |
549 | bool | |
550 | default y if !ARCH_EBSA110 | |
551 | help | |
552 | ARM processors can not fetch/store information which is not | |
553 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an | |
554 | address divisible by 4. On 32-bit ARM processors, these non-aligned | |
555 | fetch/store instructions will be emulated in software if you say | |
556 | here, which has a severe performance impact. This is necessary for | |
557 | correct operation of some network protocols. With an IP-only | |
558 | configuration it is safe to say N, otherwise say Y. | |
559 | ||
560 | endmenu | |
561 | ||
562 | menu "Boot options" | |
563 | ||
564 | # Compressed boot loader in ROM. Yes, we really want to ask about | |
565 | # TEXT and BSS so we preserve their values in the config files. | |
566 | config ZBOOT_ROM_TEXT | |
567 | hex "Compressed ROM boot loader base address" | |
568 | default "0" | |
569 | help | |
570 | The physical address at which the ROM-able zImage is to be | |
571 | placed in the target. Platforms which normally make use of | |
572 | ROM-able zImage formats normally set this to a suitable | |
573 | value in their defconfig file. | |
574 | ||
575 | If ZBOOT_ROM is not enabled, this has no effect. | |
576 | ||
577 | config ZBOOT_ROM_BSS | |
578 | hex "Compressed ROM boot loader BSS address" | |
579 | default "0" | |
580 | help | |
581 | The base address of 64KiB of read/write memory in the target | |
582 | for the ROM-able zImage, which must be available while the | |
583 | decompressor is running. Platforms which normally make use of | |
584 | ROM-able zImage formats normally set this to a suitable | |
585 | value in their defconfig file. | |
586 | ||
587 | If ZBOOT_ROM is not enabled, this has no effect. | |
588 | ||
589 | config ZBOOT_ROM | |
590 | bool "Compressed boot loader in ROM/flash" | |
591 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS | |
592 | help | |
593 | Say Y here if you intend to execute your compressed kernel image | |
594 | (zImage) directly from ROM or flash. If unsure, say N. | |
595 | ||
596 | config CMDLINE | |
597 | string "Default kernel command string" | |
598 | default "" | |
599 | help | |
600 | On some architectures (EBSA110 and CATS), there is currently no way | |
601 | for the boot loader to pass arguments to the kernel. For these | |
602 | architectures, you should supply some command-line options at build | |
603 | time by entering them here. As a minimum, you should specify the | |
604 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
605 | ||
606 | config XIP_KERNEL | |
607 | bool "Kernel Execute-In-Place from ROM" | |
608 | depends on !ZBOOT_ROM | |
609 | help | |
610 | Execute-In-Place allows the kernel to run from non-volatile storage | |
611 | directly addressable by the CPU, such as NOR flash. This saves RAM | |
612 | space since the text section of the kernel is not loaded from flash | |
613 | to RAM. Read-write sections, such as the data section and stack, | |
614 | are still copied to RAM. The XIP kernel is not compressed since | |
615 | it has to run directly from flash, so it will take more space to | |
616 | store it. The flash address used to link the kernel object files, | |
617 | and for storing it, is configuration dependent. Therefore, if you | |
618 | say Y here, you must know the proper physical address where to | |
619 | store the kernel image depending on your own flash memory usage. | |
620 | ||
621 | Also note that the make target becomes "make xipImage" rather than | |
622 | "make zImage" or "make Image". The final kernel binary to put in | |
623 | ROM memory will be arch/arm/boot/xipImage. | |
624 | ||
625 | If unsure, say N. | |
626 | ||
627 | config XIP_PHYS_ADDR | |
628 | hex "XIP Kernel Physical Location" | |
629 | depends on XIP_KERNEL | |
630 | default "0x00080000" | |
631 | help | |
632 | This is the physical address in your flash memory the kernel will | |
633 | be linked for and stored to. This address is dependent on your | |
634 | own flash usage. | |
635 | ||
636 | endmenu | |
637 | ||
ec6bced6 | 638 | if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1) |
1da177e4 LT |
639 | |
640 | menu "CPU Frequency scaling" | |
641 | ||
642 | source "drivers/cpufreq/Kconfig" | |
643 | ||
644 | config CPU_FREQ_SA1100 | |
645 | bool | |
07c6d48f | 646 | depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) |
1da177e4 LT |
647 | default y |
648 | ||
649 | config CPU_FREQ_SA1110 | |
650 | bool | |
651 | depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) | |
652 | default y | |
653 | ||
654 | config CPU_FREQ_INTEGRATOR | |
655 | tristate "CPUfreq driver for ARM Integrator CPUs" | |
656 | depends on ARCH_INTEGRATOR && CPU_FREQ | |
657 | default y | |
658 | help | |
659 | This enables the CPUfreq driver for ARM Integrator CPUs. | |
660 | ||
661 | For details, take a look at <file:Documentation/cpu-freq>. | |
662 | ||
663 | If in doubt, say Y. | |
664 | ||
665 | endmenu | |
666 | ||
667 | endif | |
668 | ||
669 | menu "Floating point emulation" | |
670 | ||
671 | comment "At least one emulation must be selected" | |
672 | ||
673 | config FPE_NWFPE | |
674 | bool "NWFPE math emulation" | |
8993a44c | 675 | depends on !AEABI || OABI_COMPAT |
1da177e4 LT |
676 | ---help--- |
677 | Say Y to include the NWFPE floating point emulator in the kernel. | |
678 | This is necessary to run most binaries. Linux does not currently | |
679 | support floating point hardware so you need to say Y here even if | |
680 | your machine has an FPA or floating point co-processor podule. | |
681 | ||
682 | You may say N here if you are going to load the Acorn FPEmulator | |
683 | early in the bootup. | |
684 | ||
685 | config FPE_NWFPE_XP | |
686 | bool "Support extended precision" | |
bedf142b | 687 | depends on FPE_NWFPE |
1da177e4 LT |
688 | help |
689 | Say Y to include 80-bit support in the kernel floating-point | |
690 | emulator. Otherwise, only 32 and 64-bit support is compiled in. | |
691 | Note that gcc does not generate 80-bit operations by default, | |
692 | so in most cases this option only enlarges the size of the | |
693 | floating point emulator without any good reason. | |
694 | ||
695 | You almost surely want to say N here. | |
696 | ||
697 | config FPE_FASTFPE | |
698 | bool "FastFPE math emulation (EXPERIMENTAL)" | |
8993a44c | 699 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL |
1da177e4 LT |
700 | ---help--- |
701 | Say Y here to include the FAST floating point emulator in the kernel. | |
702 | This is an experimental much faster emulator which now also has full | |
703 | precision for the mantissa. It does not support any exceptions. | |
704 | It is very simple, and approximately 3-6 times faster than NWFPE. | |
705 | ||
706 | It should be sufficient for most programs. It may be not suitable | |
707 | for scientific calculations, but you have to check this for yourself. | |
708 | If you do not feel you need a faster FP emulation you should better | |
709 | choose NWFPE. | |
710 | ||
711 | config VFP | |
712 | bool "VFP-format floating point maths" | |
713 | depends on CPU_V6 || CPU_ARM926T | |
714 | help | |
715 | Say Y to include VFP support code in the kernel. This is needed | |
716 | if your hardware includes a VFP unit. | |
717 | ||
718 | Please see <file:Documentation/arm/VFP/release-notes.txt> for | |
719 | release notes and additional status information. | |
720 | ||
721 | Say N if your target does not have VFP hardware. | |
722 | ||
723 | endmenu | |
724 | ||
725 | menu "Userspace binary formats" | |
726 | ||
727 | source "fs/Kconfig.binfmt" | |
728 | ||
729 | config ARTHUR | |
730 | tristate "RISC OS personality" | |
704bdda0 | 731 | depends on !AEABI |
1da177e4 LT |
732 | help |
733 | Say Y here to include the kernel code necessary if you want to run | |
734 | Acorn RISC OS/Arthur binaries under Linux. This code is still very | |
735 | experimental; if this sounds frightening, say N and sleep in peace. | |
736 | You can also say M here to compile this support as a module (which | |
737 | will be called arthur). | |
738 | ||
739 | endmenu | |
740 | ||
741 | menu "Power management options" | |
742 | ||
eceab4ac | 743 | source "kernel/power/Kconfig" |
1da177e4 | 744 | |
1da177e4 LT |
745 | config APM |
746 | tristate "Advanced Power Management Emulation" | |
1da177e4 LT |
747 | ---help--- |
748 | APM is a BIOS specification for saving power using several different | |
749 | techniques. This is mostly useful for battery powered laptops with | |
750 | APM compliant BIOSes. If you say Y here, the system time will be | |
751 | reset after a RESUME operation, the /proc/apm device will provide | |
752 | battery status information, and user-space programs will receive | |
753 | notification of APM "events" (e.g. battery status change). | |
754 | ||
1da177e4 LT |
755 | In order to use APM, you will need supporting software. For location |
756 | and more information, read <file:Documentation/pm.txt> and the | |
757 | Battery Powered Linux mini-HOWTO, available from | |
758 | <http://www.tldp.org/docs.html#howto>. | |
759 | ||
760 | This driver does not spin down disk drives (see the hdparm(8) | |
761 | manpage ("man 8 hdparm") for that), and it doesn't turn off | |
762 | VESA-compliant "green" monitors. | |
763 | ||
1da177e4 LT |
764 | Generally, if you don't have a battery in your machine, there isn't |
765 | much point in using this driver and you should say N. If you get | |
766 | random kernel OOPSes or reboots that don't seem to be related to | |
767 | anything, try disabling/enabling this option (or disabling/enabling | |
768 | APM in your BIOS). | |
769 | ||
1da177e4 LT |
770 | endmenu |
771 | ||
d5950b43 SR |
772 | source "net/Kconfig" |
773 | ||
1da177e4 LT |
774 | menu "Device Drivers" |
775 | ||
776 | source "drivers/base/Kconfig" | |
777 | ||
c35bf4a5 PM |
778 | source "drivers/connector/Kconfig" |
779 | ||
1da177e4 LT |
780 | if ALIGNMENT_TRAP |
781 | source "drivers/mtd/Kconfig" | |
782 | endif | |
783 | ||
784 | source "drivers/parport/Kconfig" | |
785 | ||
786 | source "drivers/pnp/Kconfig" | |
787 | ||
788 | source "drivers/block/Kconfig" | |
789 | ||
790 | source "drivers/acorn/block/Kconfig" | |
791 | ||
bb011b8e DB |
792 | if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ |
793 | || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ | |
d56c524a | 794 | || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE |
1da177e4 LT |
795 | source "drivers/ide/Kconfig" |
796 | endif | |
797 | ||
798 | source "drivers/scsi/Kconfig" | |
799 | ||
800 | source "drivers/md/Kconfig" | |
801 | ||
802 | source "drivers/message/fusion/Kconfig" | |
803 | ||
804 | source "drivers/ieee1394/Kconfig" | |
805 | ||
806 | source "drivers/message/i2o/Kconfig" | |
807 | ||
d5950b43 | 808 | source "drivers/net/Kconfig" |
1da177e4 LT |
809 | |
810 | source "drivers/isdn/Kconfig" | |
811 | ||
812 | # input before char - char/joystick depends on it. As does USB. | |
813 | ||
814 | source "drivers/input/Kconfig" | |
815 | ||
816 | source "drivers/char/Kconfig" | |
817 | ||
818 | source "drivers/i2c/Kconfig" | |
819 | ||
8ae12a0d DB |
820 | source "drivers/spi/Kconfig" |
821 | ||
04916c0e AZ |
822 | source "drivers/w1/Kconfig" |
823 | ||
ad2f931d JD |
824 | source "drivers/hwmon/Kconfig" |
825 | ||
1da177e4 LT |
826 | #source "drivers/l3/Kconfig" |
827 | ||
828 | source "drivers/misc/Kconfig" | |
829 | ||
a4e137ab RK |
830 | source "drivers/mfd/Kconfig" |
831 | ||
1da177e4 LT |
832 | source "drivers/media/Kconfig" |
833 | ||
834 | source "drivers/video/Kconfig" | |
835 | ||
836 | source "sound/Kconfig" | |
837 | ||
838 | source "drivers/usb/Kconfig" | |
839 | ||
840 | source "drivers/mmc/Kconfig" | |
841 | ||
842 | endmenu | |
843 | ||
844 | source "fs/Kconfig" | |
845 | ||
846 | source "arch/arm/oprofile/Kconfig" | |
847 | ||
848 | source "arch/arm/Kconfig.debug" | |
849 | ||
850 | source "security/Kconfig" | |
851 | ||
852 | source "crypto/Kconfig" | |
853 | ||
854 | source "lib/Kconfig" |