[deliverable/linux.git] / arch / arm / boot / dts / am335x-bone-common.dtsi

/*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/ {
	cpus {
		cpu@0 {
			cpu0-supply = <&dcdc2_reg>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	leds {
		pinctrl-names = "default";
		pinctrl-0 = <&user_leds_s0>;

		compatible = "gpio-leds";

		led@2 {
			label = "beaglebone:green:heartbeat";
			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
			default-state = "off";
		};

		led@3 {
			label = "beaglebone:green:mmc0";
			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
			default-state = "off";
		};

		led@4 {
			label = "beaglebone:green:usr2";
			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "cpu0";
			default-state = "off";
		};

		led@5 {
			label = "beaglebone:green:usr3";
			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc1";
			default-state = "off";
		};
	};

	vmmcsd_fixed: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "vmmcsd_fixed";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};
};

&am33xx_pinmux {
	pinctrl-names = "default";
	pinctrl-0 = <&clkout2_pin>;

	user_leds_s0: user_leds_s0 {
		pinctrl-single,pins = <
			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
		>;
	};

	i2c0_pins: pinmux_i2c0_pins {
		pinctrl-single,pins = <
			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
		>;
	};

	uart0_pins: pinmux_uart0_pins {
		pinctrl-single,pins = <
			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
		>;
	};

	clkout2_pin: pinmux_clkout2_pin {
		pinctrl-single,pins = <
			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
		>;
	};

	cpsw_default: cpsw_default {
		pinctrl-single,pins = <
			/* Slave 1 */
			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
		>;
	};

	cpsw_sleep: cpsw_sleep {
		pinctrl-single,pins = <
			/* Slave 1 reset value */
			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	davinci_mdio_default: davinci_mdio_default {
		pinctrl-single,pins = <
			/* MDIO */
			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
		>;
	};

	davinci_mdio_sleep: davinci_mdio_sleep {
		pinctrl-single,pins = <
			/* MDIO reset value */
			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
		>;
	};

	emmc_pins: pinmux_emmc_pins {
		pinctrl-single,pins = <
			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
		>;
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;

	status = "okay";
};

&usb {
	status = "okay";
};

&usb_ctrl_mod {
	status = "okay";
};

&usb0_phy {
	status = "okay";
};

&usb1_phy {
	status = "okay";
};

&usb0 {
	status = "okay";
};

&usb1 {
	status = "okay";
	dr_mode = "host";
};

&cppi41dma  {
	status = "okay";
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;

	status = "okay";
	clock-frequency = <400000>;

	tps: tps@24 {
		reg = <0x24>;
	};

};

/include/ "tps65217.dtsi"

&tps {
	regulators {
		dcdc1_reg: regulator@0 {
			regulator-name = "vdds_dpr";
			regulator-always-on;
		};

		dcdc2_reg: regulator@1 {
			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
			regulator-name = "vdd_mpu";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1325000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc3_reg: regulator@2 {
			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
			regulator-name = "vdd_core";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1150000>;
			regulator-boot-on;
			regulator-always-on;
		};

		ldo1_reg: regulator@3 {
			regulator-name = "vio,vrtc,vdds";
			regulator-always-on;
		};

		ldo2_reg: regulator@4 {
			regulator-name = "vdd_3v3aux";
			regulator-always-on;
		};

		ldo3_reg: regulator@5 {
			regulator-name = "vdd_1v8";
			regulator-always-on;
		};

		ldo4_reg: regulator@6 {
			regulator-name = "vdd_3v3a";
			regulator-always-on;
		};
	};
};

&cpsw_emac0 {
	phy_id = <&davinci_mdio>, <0>;
	phy-mode = "mii";
};

&cpsw_emac1 {
	phy_id = <&davinci_mdio>, <1>;
	phy-mode = "mii";
};

&mac {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&cpsw_default>;
	pinctrl-1 = <&cpsw_sleep>;
	status = "okay";
};

&davinci_mdio {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&davinci_mdio_default>;
	pinctrl-1 = <&davinci_mdio_sleep>;
	status = "okay";
};

&mmc1 {
	status = "okay";
	bus-width = <0x4>;
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	cd-inverted;
};
Commit	Line	Data
2ba35493 KK	1	/*
	2	* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8
	9	/ {
2ba35493 KK	10	cpus {
	11	cpu@0 {
	12	cpu0-supply = <&dcdc2_reg>;
	13	};
	14	};
	15
	16	memory {
	17	device_type = "memory";
	18	reg = <0x80000000 0x10000000>; /* 256 MB */
	19	};
	20
2ba35493 KK	21	leds {
	22	pinctrl-names = "default";
	23	pinctrl-0 = <&user_leds_s0>;
	24
	25	compatible = "gpio-leds";
	26
	27	led@2 {
	28	label = "beaglebone:green:heartbeat";
	29	gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
	30	linux,default-trigger = "heartbeat";
	31	default-state = "off";
	32	};
	33
	34	led@3 {
	35	label = "beaglebone:green:mmc0";
	36	gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
	37	linux,default-trigger = "mmc0";
	38	default-state = "off";
	39	};
	40
	41	led@4 {
	42	label = "beaglebone:green:usr2";
	43	gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
ec8a7597	44	linux,default-trigger = "cpu0";
2ba35493 KK	45	default-state = "off";
	46	};
	47
	48	led@5 {
	49	label = "beaglebone:green:usr3";
	50	gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
ec8a7597	51	linux,default-trigger = "mmc1";
2ba35493 KK	52	default-state = "off";
	53	};
	54	};
ea5b7c10 NM	55
	56	vmmcsd_fixed: fixedregulator@0 {
	57	compatible = "regulator-fixed";
	58	regulator-name = "vmmcsd_fixed";
	59	regulator-min-microvolt = <3300000>;
	60	regulator-max-microvolt = <3300000>;
	61	};
2ba35493 KK	62	};
2ba35493 KK	63
82d75afc JMC	64	&am33xx_pinmux {
	65	pinctrl-names = "default";
	66	pinctrl-0 = <&clkout2_pin>;
	67
	68	user_leds_s0: user_leds_s0 {
	69	pinctrl-single,pins = <
	70	0x54 (PIN_OUTPUT_PULLDOWN \| MUX_MODE7) /* gpmc_a5.gpio1_21 */
	71	0x58 (PIN_OUTPUT_PULLUP \| MUX_MODE7) /* gpmc_a6.gpio1_22 */
	72	0x5c (PIN_OUTPUT_PULLDOWN \| MUX_MODE7) /* gpmc_a7.gpio1_23 */
	73	0x60 (PIN_OUTPUT_PULLUP \| MUX_MODE7) /* gpmc_a8.gpio1_24 */
	74	>;
	75	};
	76
	77	i2c0_pins: pinmux_i2c0_pins {
	78	pinctrl-single,pins = <
	79	0x188 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_sda.i2c0_sda */
	80	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_scl.i2c0_scl */
	81	>;
	82	};
	83
	84	uart0_pins: pinmux_uart0_pins {
	85	pinctrl-single,pins = <
	86	0x170 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart0_rxd.uart0_rxd */
	87	0x174 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* uart0_txd.uart0_txd */
	88	>;
	89	};
	90
	91	clkout2_pin: pinmux_clkout2_pin {
	92	pinctrl-single,pins = <
	93	0x1b4 (PIN_OUTPUT_PULLDOWN \| MUX_MODE3) /* xdma_event_intr1.clkout2 */
	94	>;
	95	};
	96
	97	cpsw_default: cpsw_default {
	98	pinctrl-single,pins = <
	99	/* Slave 1 */
	100	0x110 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
	101	0x114 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txen.mii1_txen */
	102	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
	103	0x11c (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd3.mii1_txd3 */
	104	0x120 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd2.mii1_txd2 */
	105	0x124 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd1.mii1_txd1 */
	106	0x128 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd0.mii1_txd0 */
	107	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_txclk.mii1_txclk */
	108	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
	109	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
	110	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
	111	0x13c (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
	112	0x140 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
	113	>;
	114	};
	115
	116	cpsw_sleep: cpsw_sleep {
	117	pinctrl-single,pins = <
	118	/* Slave 1 reset value */
	119	0x110 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	120	0x114 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	121	0x118 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	122	0x11c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	123	0x120 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	124	0x124 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	125	0x128 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	126	0x12c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	127	0x130 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
128	0x134 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
129	0x138 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
130	0x13c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
131	0x140 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
132	>;
133	};
134
135	davinci_mdio_default: davinci_mdio_default {
136	pinctrl-single,pins = <
137	/* MDIO */
138	0x148 (PIN_INPUT_PULLUP \| SLEWCTRL_FAST \| MUX_MODE0) /* mdio_data.mdio_data */
139	0x14c (PIN_OUTPUT_PULLUP \| MUX_MODE0) /* mdio_clk.mdio_clk */
140	>;
141	};
142
143	davinci_mdio_sleep: davinci_mdio_sleep {
144	pinctrl-single,pins = <
145	/* MDIO reset value */
146	0x148 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
147	0x14c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
148	>;
149	};
150
151	mmc1_pins: pinmux_mmc1_pins {
152	pinctrl-single,pins = <
153	0x160 (PIN_INPUT \| MUX_MODE7) /* GPIO0_6 */
154	>;
155	};
156
157	emmc_pins: pinmux_emmc_pins {
158	pinctrl-single,pins = <
159	0x80 (PIN_INPUT_PULLUP \| MUX_MODE2) /* gpmc_csn1.mmc1_clk */
af905b22	160	0x84 (PIN_INPUT_PULLUP \| MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
82d75afc JMC	161	0x00 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
	162	0x04 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
	163	0x08 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
	164	0x0c (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
	165	0x10 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
	166	0x14 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
	167	0x18 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
	168	0x1c (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
	169	>;
	170	};
	171	};
	172
e0efaafb JMC	173	&uart0 {
	174	pinctrl-names = "default";
	175	pinctrl-0 = <&uart0_pins>;
	176
	177	status = "okay";
	178	};
	179
	180	&usb {
	181	status = "okay";
081df89d	182	};
e0efaafb	183
081df89d GM	184	&usb_ctrl_mod {
	185	status = "okay";
	186	};
e0efaafb	187
081df89d GM	188	&usb0_phy {
	189	status = "okay";
	190	};
e0efaafb	191
081df89d GM	192	&usb1_phy {
	193	status = "okay";
	194	};
e0efaafb	195
081df89d GM	196	&usb0 {
	197	status = "okay";
	198	};
e0efaafb	199
081df89d GM	200	&usb1 {
	201	status = "okay";
	202	dr_mode = "host";
	203	};
e0efaafb	204
081df89d GM	205	&cppi41dma {
081df89d GM	206	status = "okay";
e0efaafb JMC	207	};
	208
	209	&i2c0 {
	210	pinctrl-names = "default";
	211	pinctrl-0 = <&i2c0_pins>;
	212
	213	status = "okay";
	214	clock-frequency = <400000>;
	215
	216	tps: tps@24 {
	217	reg = <0x24>;
	218	};
	219
	220	};
	221
2ba35493 KK	222	/include/ "tps65217.dtsi"
	223
	224	&tps {
	225	regulators {
	226	dcdc1_reg: regulator@0 {
83c9b2af	227	regulator-name = "vdds_dpr";
2ba35493 KK	228	regulator-always-on;
	229	};
	230
	231	dcdc2_reg: regulator@1 {
	232	/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
	233	regulator-name = "vdd_mpu";
	234	regulator-min-microvolt = <925000>;
	235	regulator-max-microvolt = <1325000>;
	236	regulator-boot-on;
	237	regulator-always-on;
	238	};
	239
	240	dcdc3_reg: regulator@2 {
	241	/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
	242	regulator-name = "vdd_core";
	243	regulator-min-microvolt = <925000>;
	244	regulator-max-microvolt = <1150000>;
	245	regulator-boot-on;
	246	regulator-always-on;
	247	};
	248
	249	ldo1_reg: regulator@3 {
83c9b2af	250	regulator-name = "vio,vrtc,vdds";
2ba35493 KK	251	regulator-always-on;
	252	};
	253
	254	ldo2_reg: regulator@4 {
83c9b2af	255	regulator-name = "vdd_3v3aux";
2ba35493 KK	256	regulator-always-on;
	257	};
	258
	259	ldo3_reg: regulator@5 {
83c9b2af	260	regulator-name = "vdd_1v8";
2ba35493 KK	261	regulator-always-on;
	262	};
	263
	264	ldo4_reg: regulator@6 {
83c9b2af	265	regulator-name = "vdd_3v3a";
2ba35493 KK	266	regulator-always-on;
	267	};
	268	};
	269	};
	270
	271	&cpsw_emac0 {
	272	phy_id = <&davinci_mdio>, <0>;
	273	phy-mode = "mii";
	274	};
	275
	276	&cpsw_emac1 {
	277	phy_id = <&davinci_mdio>, <1>;
	278	phy-mode = "mii";
	279	};
	280
	281	&mac {
	282	pinctrl-names = "default", "sleep";
	283	pinctrl-0 = <&cpsw_default>;
	284	pinctrl-1 = <&cpsw_sleep>;
16c75a13	285	status = "okay";
2ba35493 KK	286	};
	287
	288	&davinci_mdio {
	289	pinctrl-names = "default", "sleep";
	290	pinctrl-0 = <&davinci_mdio_default>;
	291	pinctrl-1 = <&davinci_mdio_sleep>;
16c75a13	292	status = "okay";
2ba35493	293	};
3045ffff AH	294
	295	&mmc1 {
	296	status = "okay";
757a90e6	297	bus-width = <0x4>;
3045ffff AH	298	pinctrl-names = "default";
	299	pinctrl-0 = <&mmc1_pins>;
	300	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	301	cd-inverted;
	302	};