[deliverable/linux.git] / arch / arm / boot / dts / am335x-bone-common.dtsi

/*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/ {
	model = "TI AM335x BeagleBone";
	compatible = "ti,am335x-bone", "ti,am33xx";

	cpus {
		cpu@0 {
			cpu0-supply = <&dcdc2_reg>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	ocp {
		uart0: serial@44e09000 {
			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pins>;

			status = "okay";
		};

		musb: usb@47400000 {
			status = "okay";

			control@44e10000 {
				status = "okay";
			};

			usb-phy@47401300 {
				status = "okay";
			};

			usb-phy@47401b00 {
				status = "okay";
			};

			usb@47401000 {
				status = "okay";
			};

			usb@47401800 {
				status = "okay";
				dr_mode = "host";
			};

			dma-controller@07402000  {
				status = "okay";
			};
		};

		i2c0: i2c@44e0b000 {
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins>;

			status = "okay";
			clock-frequency = <400000>;

			tps: tps@24 {
				reg = <0x24>;
			};

		};
	};

	leds {
		pinctrl-names = "default";
		pinctrl-0 = <&user_leds_s0>;

		compatible = "gpio-leds";

		led@2 {
			label = "beaglebone:green:heartbeat";
			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
			default-state = "off";
		};

		led@3 {
			label = "beaglebone:green:mmc0";
			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
			default-state = "off";
		};

		led@4 {
			label = "beaglebone:green:usr2";
			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "cpu0";
			default-state = "off";
		};

		led@5 {
			label = "beaglebone:green:usr3";
			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc1";
			default-state = "off";
		};
	};
};

&am33xx_pinmux {
	pinctrl-names = "default";
	pinctrl-0 = <&clkout2_pin>;

	user_leds_s0: user_leds_s0 {
		pinctrl-single,pins = <
			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
		>;
	};

	i2c0_pins: pinmux_i2c0_pins {
		pinctrl-single,pins = <
			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
		>;
	};

	uart0_pins: pinmux_uart0_pins {
		pinctrl-single,pins = <
			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
		>;
	};

	clkout2_pin: pinmux_clkout2_pin {
		pinctrl-single,pins = <
			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
		>;
	};

	cpsw_default: cpsw_default {
		pinctrl-single,pins = <
			/* Slave 1 */
			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
		>;
	};

	cpsw_sleep: cpsw_sleep {
		pinctrl-single,pins = <
			/* Slave 1 reset value */
			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	davinci_mdio_default: davinci_mdio_default {
		pinctrl-single,pins = <
			/* MDIO */
			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
		>;
	};

	davinci_mdio_sleep: davinci_mdio_sleep {
		pinctrl-single,pins = <
			/* MDIO reset value */
			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
		>;
	};

	emmc_pins: pinmux_emmc_pins {
		pinctrl-single,pins = <
			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
			0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */
			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
		>;
	};
};

/include/ "tps65217.dtsi"

&tps {
	regulators {
		dcdc1_reg: regulator@0 {
			regulator-always-on;
		};

		dcdc2_reg: regulator@1 {
			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
			regulator-name = "vdd_mpu";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1325000>;
			regulator-boot-on;
			regulator-always-on;
		};

		dcdc3_reg: regulator@2 {
			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
			regulator-name = "vdd_core";
			regulator-min-microvolt = <925000>;
			regulator-max-microvolt = <1150000>;
			regulator-boot-on;
			regulator-always-on;
		};

		ldo1_reg: regulator@3 {
			regulator-always-on;
		};

		ldo2_reg: regulator@4 {
			regulator-always-on;
		};

		ldo3_reg: regulator@5 {
			regulator-always-on;
		};

		ldo4_reg: regulator@6 {
			regulator-always-on;
		};
	};

	vmmcsd_fixed: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "vmmcsd_fixed";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};
};

&cpsw_emac0 {
	phy_id = <&davinci_mdio>, <0>;
	phy-mode = "mii";
};

&cpsw_emac1 {
	phy_id = <&davinci_mdio>, <1>;
	phy-mode = "mii";
};

&mac {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&cpsw_default>;
	pinctrl-1 = <&cpsw_sleep>;

};

&davinci_mdio {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&davinci_mdio_default>;
	pinctrl-1 = <&davinci_mdio_sleep>;
};

&mmc1 {
	status = "okay";
	bus-width = <0x4>;
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	cd-inverted;
};
Commit	Line	Data
2ba35493 KK	1	/*
	2	* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8
	9	/ {
	10	model = "TI AM335x BeagleBone";
	11	compatible = "ti,am335x-bone", "ti,am33xx";
	12
	13	cpus {
	14	cpu@0 {
	15	cpu0-supply = <&dcdc2_reg>;
	16	};
	17	};
	18
	19	memory {
	20	device_type = "memory";
	21	reg = <0x80000000 0x10000000>; /* 256 MB */
	22	};
	23
2ba35493 KK	24	ocp {
	25	uart0: serial@44e09000 {
	26	pinctrl-names = "default";
	27	pinctrl-0 = <&uart0_pins>;
	28
	29	status = "okay";
	30	};
	31
	32	musb: usb@47400000 {
	33	status = "okay";
	34
	35	control@44e10000 {
	36	status = "okay";
	37	};
	38
	39	usb-phy@47401300 {
	40	status = "okay";
	41	};
	42
	43	usb-phy@47401b00 {
	44	status = "okay";
	45	};
	46
	47	usb@47401000 {
	48	status = "okay";
	49	};
	50
	51	usb@47401800 {
	52	status = "okay";
	53	dr_mode = "host";
	54	};
	55
	56	dma-controller@07402000 {
	57	status = "okay";
	58	};
	59	};
	60
	61	i2c0: i2c@44e0b000 {
	62	pinctrl-names = "default";
	63	pinctrl-0 = <&i2c0_pins>;
	64
	65	status = "okay";
	66	clock-frequency = <400000>;
	67
	68	tps: tps@24 {
	69	reg = <0x24>;
	70	};
	71
	72	};
	73	};
	74
	75	leds {
	76	pinctrl-names = "default";
	77	pinctrl-0 = <&user_leds_s0>;
	78
	79	compatible = "gpio-leds";
	80
	81	led@2 {
	82	label = "beaglebone:green:heartbeat";
	83	gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
	84	linux,default-trigger = "heartbeat";
	85	default-state = "off";
	86	};
	87
88	led@3 {
89	label = "beaglebone:green:mmc0";
90	gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
91	linux,default-trigger = "mmc0";
92	default-state = "off";
93	};
94
95	led@4 {
96	label = "beaglebone:green:usr2";
97	gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
ec8a7597	98	linux,default-trigger = "cpu0";
2ba35493 KK	99	default-state = "off";
	100	};
	101
	102	led@5 {
	103	label = "beaglebone:green:usr3";
	104	gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
ec8a7597	105	linux,default-trigger = "mmc1";
2ba35493 KK	106	default-state = "off";
	107	};
	108	};
	109	};
	110
82d75afc JMC	111	&am33xx_pinmux {
	112	pinctrl-names = "default";
	113	pinctrl-0 = <&clkout2_pin>;
	114
	115	user_leds_s0: user_leds_s0 {
	116	pinctrl-single,pins = <
	117	0x54 (PIN_OUTPUT_PULLDOWN \| MUX_MODE7) /* gpmc_a5.gpio1_21 */
	118	0x58 (PIN_OUTPUT_PULLUP \| MUX_MODE7) /* gpmc_a6.gpio1_22 */
	119	0x5c (PIN_OUTPUT_PULLDOWN \| MUX_MODE7) /* gpmc_a7.gpio1_23 */
	120	0x60 (PIN_OUTPUT_PULLUP \| MUX_MODE7) /* gpmc_a8.gpio1_24 */
	121	>;
	122	};
	123
	124	i2c0_pins: pinmux_i2c0_pins {
	125	pinctrl-single,pins = <
	126	0x188 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_sda.i2c0_sda */
	127	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c0_scl.i2c0_scl */
	128	>;
	129	};
	130
	131	uart0_pins: pinmux_uart0_pins {
	132	pinctrl-single,pins = <
	133	0x170 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart0_rxd.uart0_rxd */
	134	0x174 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* uart0_txd.uart0_txd */
	135	>;
	136	};
	137
	138	clkout2_pin: pinmux_clkout2_pin {
	139	pinctrl-single,pins = <
	140	0x1b4 (PIN_OUTPUT_PULLDOWN \| MUX_MODE3) /* xdma_event_intr1.clkout2 */
	141	>;
	142	};
	143
	144	cpsw_default: cpsw_default {
	145	pinctrl-single,pins = <
	146	/* Slave 1 */
	147	0x110 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
	148	0x114 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txen.mii1_txen */
	149	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
	150	0x11c (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd3.mii1_txd3 */
	151	0x120 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd2.mii1_txd2 */
	152	0x124 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd1.mii1_txd1 */
	153	0x128 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* mii1_txd0.mii1_txd0 */
	154	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_txclk.mii1_txclk */
	155	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
	156	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
	157	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
	158	0x13c (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
	159	0x140 (PIN_INPUT_PULLUP \| MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
	160	>;
	161	};
	162
	163	cpsw_sleep: cpsw_sleep {
	164	pinctrl-single,pins = <
	165	/* Slave 1 reset value */
	166	0x110 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	167	0x114 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	168	0x118 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	169	0x11c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	170	0x120 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	171	0x124 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	172	0x128 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	173	0x12c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
	174	0x130 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
175	0x134 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
176	0x138 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
177	0x13c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
178	0x140 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
179	>;
180	};
181
182	davinci_mdio_default: davinci_mdio_default {
183	pinctrl-single,pins = <
184	/* MDIO */
185	0x148 (PIN_INPUT_PULLUP \| SLEWCTRL_FAST \| MUX_MODE0) /* mdio_data.mdio_data */
186	0x14c (PIN_OUTPUT_PULLUP \| MUX_MODE0) /* mdio_clk.mdio_clk */
187	>;
188	};
189
190	davinci_mdio_sleep: davinci_mdio_sleep {
191	pinctrl-single,pins = <
192	/* MDIO reset value */
193	0x148 (PIN_INPUT_PULLDOWN \| MUX_MODE7)
194	0x14c (PIN_INPUT_PULLDOWN \| MUX_MODE7)
195	>;
196	};
197
198	mmc1_pins: pinmux_mmc1_pins {
199	pinctrl-single,pins = <
200	0x160 (PIN_INPUT \| MUX_MODE7) /* GPIO0_6 */
201	>;
202	};
203
204	emmc_pins: pinmux_emmc_pins {
205	pinctrl-single,pins = <
206	0x80 (PIN_INPUT_PULLUP \| MUX_MODE2) /* gpmc_csn1.mmc1_clk */
207	0x84 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_csn2.mmc1_cmd */
208	0x00 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
209	0x04 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
210	0x08 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
211	0x0c (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
212	0x10 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
213	0x14 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
214	0x18 (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
215	0x1c (PIN_INPUT_PULLUP \| MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
216	>;
217	};
218	};
219
2ba35493 KK	220	/include/ "tps65217.dtsi"
	221
	222	&tps {
	223	regulators {
	224	dcdc1_reg: regulator@0 {
	225	regulator-always-on;
	226	};
	227
	228	dcdc2_reg: regulator@1 {
	229	/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
	230	regulator-name = "vdd_mpu";
	231	regulator-min-microvolt = <925000>;
	232	regulator-max-microvolt = <1325000>;
	233	regulator-boot-on;
	234	regulator-always-on;
	235	};
	236
	237	dcdc3_reg: regulator@2 {
	238	/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
	239	regulator-name = "vdd_core";
	240	regulator-min-microvolt = <925000>;
	241	regulator-max-microvolt = <1150000>;
	242	regulator-boot-on;
	243	regulator-always-on;
	244	};
	245
	246	ldo1_reg: regulator@3 {
	247	regulator-always-on;
	248	};
	249
	250	ldo2_reg: regulator@4 {
	251	regulator-always-on;
	252	};
	253
	254	ldo3_reg: regulator@5 {
	255	regulator-always-on;
	256	};
	257
	258	ldo4_reg: regulator@6 {
	259	regulator-always-on;
	260	};
	261	};
1aac4a99 KK	262
	263	vmmcsd_fixed: fixedregulator@0 {
	264	compatible = "regulator-fixed";
	265	regulator-name = "vmmcsd_fixed";
	266	regulator-min-microvolt = <3300000>;
	267	regulator-max-microvolt = <3300000>;
	268	};
2ba35493 KK	269	};
	270
	271	&cpsw_emac0 {
	272	phy_id = <&davinci_mdio>, <0>;
	273	phy-mode = "mii";
	274	};
	275
	276	&cpsw_emac1 {
	277	phy_id = <&davinci_mdio>, <1>;
	278	phy-mode = "mii";
	279	};
	280
	281	&mac {
	282	pinctrl-names = "default", "sleep";
	283	pinctrl-0 = <&cpsw_default>;
	284	pinctrl-1 = <&cpsw_sleep>;
	285
	286	};
	287
	288	&davinci_mdio {
	289	pinctrl-names = "default", "sleep";
	290	pinctrl-0 = <&davinci_mdio_default>;
	291	pinctrl-1 = <&davinci_mdio_sleep>;
	292	};
3045ffff AH	293
	294	&mmc1 {
	295	status = "okay";
757a90e6	296	bus-width = <0x4>;
3045ffff AH	297	pinctrl-names = "default";
	298	pinctrl-0 = <&mmc1_pins>;
	299	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	300	cd-inverted;
	301	};