Commit | Line | Data |
---|---|---|
e415245c EBS |
1 | /* |
2 | * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x | |
3 | * | |
4 | * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | /dts-v1/; | |
12 | ||
13 | #include "am33xx.dtsi" | |
14 | ||
15 | / { | |
16 | cpus { | |
17 | cpu@0 { | |
18 | cpu0-supply = <&vdd1_reg>; | |
19 | }; | |
20 | }; | |
21 | ||
22 | memory { | |
23 | device_type = "memory"; | |
24 | reg = <0x80000000 0x10000000>; /* 256 MB */ | |
25 | }; | |
26 | ||
27 | leds { | |
28 | pinctrl-names = "default"; | |
29 | pinctrl-0 = <&leds_pins>; | |
30 | ||
31 | compatible = "gpio-leds"; | |
32 | ||
33 | led@0 { | |
34 | label = "com:green:user"; | |
35 | gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; | |
36 | default-state = "on"; | |
37 | }; | |
38 | }; | |
39 | ||
40 | vbat: fixedregulator@0 { | |
41 | compatible = "regulator-fixed"; | |
42 | regulator-name = "vbat"; | |
43 | regulator-min-microvolt = <5000000>; | |
44 | regulator-max-microvolt = <5000000>; | |
45 | regulator-boot-on; | |
46 | }; | |
0ae6f9ee EBS |
47 | |
48 | vmmc: fixedregulator@0 { | |
49 | compatible = "regulator-fixed"; | |
50 | regulator-name = "vmmc"; | |
51 | regulator-min-microvolt = <3300000>; | |
52 | regulator-max-microvolt = <3300000>; | |
53 | }; | |
e415245c EBS |
54 | }; |
55 | ||
56 | &am33xx_pinmux { | |
57 | i2c0_pins: pinmux_i2c0_pins { | |
58 | pinctrl-single,pins = < | |
8a3ecb21 JMC |
59 | AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ |
60 | AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ | |
e415245c EBS |
61 | >; |
62 | }; | |
63 | ||
64 | nandflash_pins: pinmux_nandflash_pins { | |
65 | pinctrl-single,pins = < | |
8a3ecb21 JMC |
66 | AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ |
67 | AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ | |
68 | AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ | |
69 | AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ | |
70 | AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ | |
71 | AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ | |
72 | AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ | |
73 | AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ | |
74 | AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ | |
75 | AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ | |
76 | AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ | |
77 | AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ | |
78 | AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ | |
79 | AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ | |
80 | AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ | |
e415245c EBS |
81 | >; |
82 | }; | |
83 | ||
84 | uart0_pins: pinmux_uart0_pins { | |
85 | pinctrl-single,pins = < | |
8a3ecb21 JMC |
86 | AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ |
87 | AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ | |
e415245c EBS |
88 | >; |
89 | }; | |
90 | ||
91 | leds_pins: pinmux_leds_pins { | |
92 | pinctrl-single,pins = < | |
8a3ecb21 | 93 | AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ |
e415245c EBS |
94 | >; |
95 | }; | |
96 | }; | |
97 | ||
16c75a13 JH |
98 | &mac { |
99 | status = "okay"; | |
100 | }; | |
101 | ||
102 | &davinci_mdio { | |
103 | status = "okay"; | |
104 | }; | |
105 | ||
e415245c EBS |
106 | &cpsw_emac0 { |
107 | phy_id = <&davinci_mdio>, <0>; | |
24faebd6 | 108 | phy-mode = "rmii"; |
e415245c EBS |
109 | }; |
110 | ||
111 | &cpsw_emac1 { | |
112 | phy_id = <&davinci_mdio>, <1>; | |
24faebd6 EBS |
113 | phy-mode = "rmii"; |
114 | }; | |
115 | ||
116 | &phy_sel { | |
117 | rmii-clock-ext; | |
e415245c EBS |
118 | }; |
119 | ||
120 | &elm { | |
121 | status = "okay"; | |
122 | }; | |
123 | ||
124 | &gpmc { | |
125 | status = "okay"; | |
126 | pinctrl-names = "default"; | |
127 | pinctrl-0 = <&nandflash_pins>; | |
128 | ||
e2c5eb78 | 129 | ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ |
e415245c EBS |
130 | |
131 | nand@0,0 { | |
e2c5eb78 | 132 | reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
e415245c EBS |
133 | nand-bus-width = <8>; |
134 | ti,nand-ecc-opt = "bch8"; | |
e415245c EBS |
135 | gpmc,device-width = <1>; |
136 | gpmc,sync-clk-ps = <0>; | |
137 | gpmc,cs-on-ns = <0>; | |
138 | gpmc,cs-rd-off-ns = <44>; | |
139 | gpmc,cs-wr-off-ns = <44>; | |
140 | gpmc,adv-on-ns = <6>; | |
141 | gpmc,adv-rd-off-ns = <34>; | |
142 | gpmc,adv-wr-off-ns = <44>; | |
143 | gpmc,we-on-ns = <0>; | |
144 | gpmc,we-off-ns = <40>; | |
145 | gpmc,oe-on-ns = <0>; | |
146 | gpmc,oe-off-ns = <54>; | |
147 | gpmc,access-ns = <64>; | |
148 | gpmc,rd-cycle-ns = <82>; | |
149 | gpmc,wr-cycle-ns = <82>; | |
150 | gpmc,wait-on-read = "true"; | |
151 | gpmc,wait-on-write = "true"; | |
152 | gpmc,bus-turnaround-ns = <0>; | |
153 | gpmc,cycle2cycle-delay-ns = <0>; | |
154 | gpmc,clk-activation-ns = <0>; | |
155 | gpmc,wait-monitoring-ns = <0>; | |
156 | gpmc,wr-access-ns = <40>; | |
157 | gpmc,wr-data-mux-bus-ns = <0>; | |
158 | ||
159 | #address-cells = <1>; | |
160 | #size-cells = <1>; | |
161 | elm_id = <&elm>; | |
162 | ||
163 | /* MTD partition table */ | |
164 | partition@0 { | |
165 | label = "SPL"; | |
166 | reg = <0x00000000 0x000080000>; | |
167 | }; | |
168 | ||
169 | partition@1 { | |
170 | label = "U-boot"; | |
171 | reg = <0x00080000 0x001e0000>; | |
172 | }; | |
173 | ||
174 | partition@2 { | |
175 | label = "U-Boot Env"; | |
176 | reg = <0x00260000 0x00020000>; | |
177 | }; | |
178 | ||
179 | partition@3 { | |
180 | label = "Kernel"; | |
181 | reg = <0x00280000 0x00500000>; | |
182 | }; | |
183 | ||
184 | partition@4 { | |
185 | label = "File System"; | |
186 | reg = <0x00780000 0x007880000>; | |
187 | }; | |
188 | }; | |
189 | }; | |
190 | ||
191 | &i2c0 { | |
192 | status = "okay"; | |
193 | pinctrl-names = "default"; | |
194 | pinctrl-0 = <&i2c0_pins>; | |
195 | ||
196 | clock-frequency = <400000>; | |
197 | ||
198 | tps: tps@2d { | |
199 | reg = <0x2d>; | |
200 | }; | |
201 | }; | |
202 | ||
0ae6f9ee EBS |
203 | &mmc1 { |
204 | status = "okay"; | |
205 | vmmc-supply = <&vmmc>; | |
206 | bus-width = <4>; | |
207 | }; | |
208 | ||
e415245c EBS |
209 | &uart0 { |
210 | status = "okay"; | |
211 | pinctrl-names = "default"; | |
212 | pinctrl-0 = <&uart0_pins>; | |
213 | }; | |
214 | ||
caa73370 EBS |
215 | &usb { |
216 | status = "okay"; | |
2cd1de1c | 217 | }; |
caa73370 | 218 | |
2cd1de1c GM |
219 | &usb_ctrl_mod { |
220 | status = "okay"; | |
221 | }; | |
caa73370 | 222 | |
2cd1de1c GM |
223 | &usb0_phy { |
224 | status = "okay"; | |
225 | }; | |
caa73370 | 226 | |
2cd1de1c GM |
227 | &usb1_phy { |
228 | status = "okay"; | |
229 | }; | |
caa73370 | 230 | |
2cd1de1c GM |
231 | &usb0 { |
232 | status = "okay"; | |
233 | }; | |
caa73370 | 234 | |
2cd1de1c GM |
235 | &usb1 { |
236 | status = "okay"; | |
237 | dr_mode = "host"; | |
238 | }; | |
caa73370 | 239 | |
2cd1de1c GM |
240 | &cppi41dma { |
241 | status = "okay"; | |
caa73370 EBS |
242 | }; |
243 | ||
e415245c EBS |
244 | #include "tps65910.dtsi" |
245 | ||
246 | &tps { | |
247 | vcc1-supply = <&vbat>; | |
248 | vcc2-supply = <&vbat>; | |
249 | vcc3-supply = <&vbat>; | |
250 | vcc4-supply = <&vbat>; | |
251 | vcc5-supply = <&vbat>; | |
252 | vcc6-supply = <&vbat>; | |
253 | vcc7-supply = <&vbat>; | |
254 | vccio-supply = <&vbat>; | |
255 | ||
256 | regulators { | |
257 | vrtc_reg: regulator@0 { | |
258 | regulator-always-on; | |
259 | }; | |
260 | ||
261 | vio_reg: regulator@1 { | |
262 | regulator-always-on; | |
263 | }; | |
264 | ||
265 | vdd1_reg: regulator@2 { | |
266 | /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ | |
267 | regulator-name = "vdd_mpu"; | |
268 | regulator-min-microvolt = <912500>; | |
269 | regulator-max-microvolt = <1312500>; | |
270 | regulator-boot-on; | |
271 | regulator-always-on; | |
272 | }; | |
273 | ||
274 | vdd2_reg: regulator@3 { | |
275 | /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ | |
276 | regulator-name = "vdd_core"; | |
277 | regulator-min-microvolt = <912500>; | |
278 | regulator-max-microvolt = <1150000>; | |
279 | regulator-boot-on; | |
280 | regulator-always-on; | |
281 | }; | |
282 | ||
283 | vdd3_reg: regulator@4 { | |
284 | regulator-always-on; | |
285 | }; | |
286 | ||
287 | vdig1_reg: regulator@5 { | |
288 | regulator-always-on; | |
289 | }; | |
290 | ||
291 | vdig2_reg: regulator@6 { | |
292 | regulator-always-on; | |
293 | }; | |
294 | ||
295 | vpll_reg: regulator@7 { | |
296 | regulator-always-on; | |
297 | }; | |
298 | ||
299 | vdac_reg: regulator@8 { | |
300 | regulator-always-on; | |
301 | }; | |
302 | ||
303 | vaux1_reg: regulator@9 { | |
304 | regulator-always-on; | |
305 | }; | |
306 | ||
307 | vaux2_reg: regulator@10 { | |
308 | regulator-always-on; | |
309 | }; | |
310 | ||
311 | vaux33_reg: regulator@11 { | |
312 | regulator-always-on; | |
313 | }; | |
314 | ||
315 | vmmc_reg: regulator@12 { | |
316 | regulator-always-on; | |
317 | }; | |
318 | }; | |
319 | }; | |
320 |