Commit | Line | Data |
---|---|---|
5a0f93c6 NM |
1 | /* |
2 | * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
10 | #include "dra74x.dtsi" | |
5a0f93c6 NM |
11 | #include <dt-bindings/gpio/gpio.h> |
12 | #include <dt-bindings/interrupt-controller/irq.h> | |
13 | ||
14 | / { | |
15 | model = "TI AM5728 BeagleBoard-X15"; | |
16 | compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; | |
17 | ||
18 | aliases { | |
19 | rtc0 = &mcp_rtc; | |
20 | rtc1 = &tps659038_rtc; | |
00edd317 | 21 | rtc2 = &rtc; |
0c534938 | 22 | display0 = &hdmi0; |
5a0f93c6 NM |
23 | }; |
24 | ||
25 | memory { | |
26 | device_type = "memory"; | |
27 | reg = <0x80000000 0x80000000>; | |
28 | }; | |
29 | ||
30 | vdd_3v3: fixedregulator-vdd_3v3 { | |
31 | compatible = "regulator-fixed"; | |
32 | regulator-name = "vdd_3v3"; | |
33 | vin-supply = <®en1>; | |
34 | regulator-min-microvolt = <3300000>; | |
35 | regulator-max-microvolt = <3300000>; | |
36 | }; | |
37 | ||
38 | vtt_fixed: fixedregulator-vtt { | |
39 | /* TPS51200 */ | |
40 | compatible = "regulator-fixed"; | |
41 | regulator-name = "vtt_fixed"; | |
42 | vin-supply = <&smps3_reg>; | |
43 | regulator-min-microvolt = <3300000>; | |
44 | regulator-max-microvolt = <3300000>; | |
45 | regulator-always-on; | |
46 | regulator-boot-on; | |
47 | enable-active-high; | |
48 | gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; | |
49 | }; | |
50 | ||
51 | leds { | |
52 | compatible = "gpio-leds"; | |
53 | pinctrl-names = "default"; | |
54 | pinctrl-0 = <&leds_pins_default>; | |
55 | ||
56 | led@0 { | |
57 | label = "beagle-x15:usr0"; | |
58 | gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; | |
59 | linux,default-trigger = "heartbeat"; | |
60 | default-state = "off"; | |
61 | }; | |
62 | ||
63 | led@1 { | |
64 | label = "beagle-x15:usr1"; | |
65 | gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; | |
66 | linux,default-trigger = "cpu0"; | |
67 | default-state = "off"; | |
68 | }; | |
69 | ||
70 | led@2 { | |
71 | label = "beagle-x15:usr2"; | |
72 | gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; | |
73 | linux,default-trigger = "mmc0"; | |
74 | default-state = "off"; | |
75 | }; | |
76 | ||
77 | led@3 { | |
78 | label = "beagle-x15:usr3"; | |
79 | gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; | |
80 | linux,default-trigger = "ide-disk"; | |
81 | default-state = "off"; | |
82 | }; | |
83 | }; | |
7a03f2c0 NM |
84 | |
85 | gpio_fan: gpio_fan { | |
86 | /* Based on 5v 500mA AFB02505HHB */ | |
87 | compatible = "gpio-fan"; | |
ed12f102 | 88 | gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; |
7a03f2c0 NM |
89 | gpio-fan,speed-map = <0 0>, |
90 | <13000 1>; | |
d723cfea | 91 | #cooling-cells = <2>; |
7a03f2c0 | 92 | }; |
f60db98e RQ |
93 | |
94 | extcon_usb1: extcon_usb1 { | |
95 | compatible = "linux,extcon-usb-gpio"; | |
96 | id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; | |
97 | pinctrl-names = "default"; | |
98 | pinctrl-0 = <&extcon_usb1_pins>; | |
99 | }; | |
100 | ||
101 | extcon_usb2: extcon_usb2 { | |
102 | compatible = "linux,extcon-usb-gpio"; | |
103 | id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; | |
104 | pinctrl-names = "default"; | |
105 | pinctrl-0 = <&extcon_usb2_pins>; | |
106 | }; | |
0c534938 TV |
107 | |
108 | hdmi0: connector { | |
109 | compatible = "hdmi-connector"; | |
110 | label = "hdmi"; | |
111 | ||
112 | type = "a"; | |
113 | ||
114 | port { | |
115 | hdmi_connector_in: endpoint { | |
116 | remote-endpoint = <&tpd12s015_out>; | |
117 | }; | |
118 | }; | |
119 | }; | |
120 | ||
121 | tpd12s015: encoder { | |
122 | compatible = "ti,tpd12s015"; | |
123 | ||
124 | pinctrl-names = "default"; | |
125 | pinctrl-0 = <&tpd12s015_pins>; | |
126 | ||
127 | gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ | |
128 | <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ | |
129 | <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ | |
130 | ||
131 | ports { | |
132 | #address-cells = <1>; | |
133 | #size-cells = <0>; | |
134 | ||
135 | port@0 { | |
136 | reg = <0>; | |
137 | ||
138 | tpd12s015_in: endpoint { | |
139 | remote-endpoint = <&hdmi_out>; | |
140 | }; | |
141 | }; | |
142 | ||
143 | port@1 { | |
144 | reg = <1>; | |
145 | ||
146 | tpd12s015_out: endpoint { | |
147 | remote-endpoint = <&hdmi_connector_in>; | |
148 | }; | |
149 | }; | |
150 | }; | |
151 | }; | |
5a0f93c6 NM |
152 | }; |
153 | ||
154 | &dra7_pmx_core { | |
155 | leds_pins_default: leds_pins_default { | |
156 | pinctrl-single,pins = < | |
157 | 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ | |
158 | 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ | |
159 | 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ | |
160 | 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ | |
161 | >; | |
162 | }; | |
163 | ||
164 | i2c1_pins_default: i2c1_pins_default { | |
165 | pinctrl-single,pins = < | |
166 | 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ | |
167 | 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ | |
168 | >; | |
169 | }; | |
170 | ||
0c534938 TV |
171 | hdmi_pins: pinmux_hdmi_pins { |
172 | pinctrl-single,pins = < | |
173 | 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ | |
174 | 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ | |
175 | >; | |
176 | }; | |
177 | ||
5a0f93c6 NM |
178 | i2c3_pins_default: i2c3_pins_default { |
179 | pinctrl-single,pins = < | |
180 | 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ | |
181 | 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ | |
182 | >; | |
183 | }; | |
184 | ||
185 | uart3_pins_default: uart3_pins_default { | |
186 | pinctrl-single,pins = < | |
5eb67198 NM |
187 | 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ |
188 | 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ | |
5a0f93c6 NM |
189 | >; |
190 | }; | |
191 | ||
192 | mmc1_pins_default: mmc1_pins_default { | |
193 | pinctrl-single,pins = < | |
194 | 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ | |
195 | 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ | |
196 | 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ | |
197 | 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ | |
198 | 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ | |
199 | 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ | |
200 | 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ | |
201 | >; | |
202 | }; | |
203 | ||
204 | mmc2_pins_default: mmc2_pins_default { | |
205 | pinctrl-single,pins = < | |
206 | 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ | |
207 | 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ | |
208 | 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ | |
209 | 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ | |
210 | 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ | |
211 | 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ | |
212 | 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ | |
213 | 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ | |
214 | 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ | |
215 | 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ | |
216 | >; | |
217 | }; | |
218 | ||
a75dacf8 FB |
219 | cpsw_pins_default: cpsw_pins_default { |
220 | pinctrl-single,pins = < | |
221 | /* Slave 1 */ | |
222 | 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ | |
223 | 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ | |
224 | 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ | |
225 | 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ | |
226 | 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ | |
227 | 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ | |
228 | 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ | |
229 | 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ | |
230 | 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ | |
231 | 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ | |
232 | 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ | |
233 | 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ | |
234 | ||
235 | /* Slave 2 */ | |
236 | 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ | |
237 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ | |
238 | 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ | |
239 | 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ | |
240 | 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ | |
241 | 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ | |
242 | 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ | |
243 | 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ | |
244 | 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ | |
245 | 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ | |
246 | 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ | |
247 | 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ | |
248 | >; | |
249 | ||
250 | }; | |
251 | ||
252 | cpsw_pins_sleep: cpsw_pins_sleep { | |
253 | pinctrl-single,pins = < | |
254 | /* Slave 1 */ | |
255 | 0x250 (PIN_INPUT | MUX_MODE15) | |
256 | 0x254 (PIN_INPUT | MUX_MODE15) | |
257 | 0x258 (PIN_INPUT | MUX_MODE15) | |
258 | 0x25c (PIN_INPUT | MUX_MODE15) | |
259 | 0x260 (PIN_INPUT | MUX_MODE15) | |
260 | 0x264 (PIN_INPUT | MUX_MODE15) | |
261 | 0x268 (PIN_INPUT | MUX_MODE15) | |
262 | 0x26c (PIN_INPUT | MUX_MODE15) | |
263 | 0x270 (PIN_INPUT | MUX_MODE15) | |
264 | 0x274 (PIN_INPUT | MUX_MODE15) | |
265 | 0x278 (PIN_INPUT | MUX_MODE15) | |
266 | 0x27c (PIN_INPUT | MUX_MODE15) | |
267 | ||
268 | /* Slave 2 */ | |
269 | 0x198 (PIN_INPUT | MUX_MODE15) | |
270 | 0x19c (PIN_INPUT | MUX_MODE15) | |
271 | 0x1a0 (PIN_INPUT | MUX_MODE15) | |
272 | 0x1a4 (PIN_INPUT | MUX_MODE15) | |
273 | 0x1a8 (PIN_INPUT | MUX_MODE15) | |
274 | 0x1ac (PIN_INPUT | MUX_MODE15) | |
275 | 0x1b0 (PIN_INPUT | MUX_MODE15) | |
276 | 0x1b4 (PIN_INPUT | MUX_MODE15) | |
277 | 0x1b8 (PIN_INPUT | MUX_MODE15) | |
278 | 0x1bc (PIN_INPUT | MUX_MODE15) | |
279 | 0x1c0 (PIN_INPUT | MUX_MODE15) | |
280 | 0x1c4 (PIN_INPUT | MUX_MODE15) | |
281 | >; | |
282 | }; | |
283 | ||
284 | davinci_mdio_pins_default: davinci_mdio_pins_default { | |
285 | pinctrl-single,pins = < | |
286 | /* MDIO */ | |
287 | 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ | |
288 | 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ | |
289 | >; | |
290 | }; | |
291 | ||
292 | davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { | |
293 | pinctrl-single,pins = < | |
294 | 0x23c (PIN_INPUT | MUX_MODE15) | |
295 | 0x240 (PIN_INPUT | MUX_MODE15) | |
296 | >; | |
297 | }; | |
298 | ||
5a0f93c6 NM |
299 | tps659038_pins_default: tps659038_pins_default { |
300 | pinctrl-single,pins = < | |
301 | 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ | |
302 | >; | |
303 | }; | |
304 | ||
305 | tmp102_pins_default: tmp102_pins_default { | |
306 | pinctrl-single,pins = < | |
307 | 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ | |
308 | >; | |
309 | }; | |
310 | ||
311 | mcp79410_pins_default: mcp79410_pins_default { | |
312 | pinctrl-single,pins = < | |
313 | 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ | |
314 | >; | |
315 | }; | |
316 | ||
317 | usb1_pins: pinmux_usb1_pins { | |
318 | pinctrl-single,pins = < | |
319 | 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ | |
320 | >; | |
321 | }; | |
322 | ||
f60db98e RQ |
323 | extcon_usb1_pins: extcon_usb1_pins { |
324 | pinctrl-single,pins = < | |
325 | 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ | |
326 | >; | |
327 | }; | |
328 | ||
329 | extcon_usb2_pins: extcon_usb2_pins { | |
330 | pinctrl-single,pins = < | |
331 | 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ | |
332 | >; | |
333 | }; | |
0c534938 TV |
334 | |
335 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
336 | pinctrl-single,pins = < | |
337 | 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ | |
338 | 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ | |
339 | 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ | |
340 | >; | |
341 | }; | |
5a0f93c6 NM |
342 | }; |
343 | ||
344 | &i2c1 { | |
345 | status = "okay"; | |
346 | pinctrl-names = "default"; | |
347 | pinctrl-0 = <&i2c1_pins_default>; | |
348 | clock-frequency = <400000>; | |
349 | ||
350 | tps659038: tps659038@58 { | |
351 | compatible = "ti,tps659038"; | |
352 | reg = <0x58>; | |
353 | interrupt-parent = <&gpio1>; | |
354 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
355 | ||
356 | pinctrl-names = "default"; | |
357 | pinctrl-0 = <&tps659038_pins_default>; | |
358 | ||
359 | #interrupt-cells = <2>; | |
360 | interrupt-controller; | |
361 | ||
362 | ti,system-power-controller; | |
363 | ||
364 | tps659038_pmic { | |
365 | compatible = "ti,tps659038-pmic"; | |
366 | ||
367 | regulators { | |
368 | smps12_reg: smps12 { | |
369 | /* VDD_MPU */ | |
370 | regulator-name = "smps12"; | |
371 | regulator-min-microvolt = < 850000>; | |
372 | regulator-max-microvolt = <1250000>; | |
373 | regulator-always-on; | |
374 | regulator-boot-on; | |
375 | }; | |
376 | ||
377 | smps3_reg: smps3 { | |
378 | /* VDD_DDR */ | |
379 | regulator-name = "smps3"; | |
380 | regulator-min-microvolt = <1350000>; | |
381 | regulator-max-microvolt = <1350000>; | |
382 | regulator-always-on; | |
383 | regulator-boot-on; | |
384 | }; | |
385 | ||
386 | smps45_reg: smps45 { | |
387 | /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ | |
388 | regulator-name = "smps45"; | |
389 | regulator-min-microvolt = < 850000>; | |
390 | regulator-max-microvolt = <1150000>; | |
391 | regulator-always-on; | |
392 | regulator-boot-on; | |
393 | }; | |
394 | ||
395 | smps6_reg: smps6 { | |
396 | /* VDD_CORE */ | |
397 | regulator-name = "smps6"; | |
398 | regulator-min-microvolt = <850000>; | |
399 | regulator-max-microvolt = <1030000>; | |
400 | regulator-always-on; | |
401 | regulator-boot-on; | |
402 | }; | |
403 | ||
404 | /* SMPS7 unused */ | |
405 | ||
406 | smps8_reg: smps8 { | |
407 | /* VDD_1V8 */ | |
408 | regulator-name = "smps8"; | |
409 | regulator-min-microvolt = <1800000>; | |
410 | regulator-max-microvolt = <1800000>; | |
411 | regulator-always-on; | |
412 | regulator-boot-on; | |
413 | }; | |
414 | ||
415 | /* SMPS9 unused */ | |
416 | ||
417 | ldo1_reg: ldo1 { | |
418 | /* VDD_SD */ | |
419 | regulator-name = "ldo1"; | |
420 | regulator-min-microvolt = <1800000>; | |
421 | regulator-max-microvolt = <3300000>; | |
422 | regulator-boot-on; | |
423 | }; | |
424 | ||
425 | ldo2_reg: ldo2 { | |
426 | /* VDD_SHV5 */ | |
427 | regulator-name = "ldo2"; | |
428 | regulator-min-microvolt = <3300000>; | |
429 | regulator-max-microvolt = <3300000>; | |
430 | regulator-always-on; | |
431 | regulator-boot-on; | |
432 | }; | |
433 | ||
434 | ldo3_reg: ldo3 { | |
435 | /* VDDA_1V8_PHY */ | |
436 | regulator-name = "ldo3"; | |
437 | regulator-min-microvolt = <1800000>; | |
438 | regulator-max-microvolt = <1800000>; | |
439 | regulator-always-on; | |
440 | regulator-boot-on; | |
441 | }; | |
442 | ||
443 | ldo9_reg: ldo9 { | |
444 | /* VDD_RTC */ | |
445 | regulator-name = "ldo9"; | |
446 | regulator-min-microvolt = <1050000>; | |
447 | regulator-max-microvolt = <1050000>; | |
448 | regulator-always-on; | |
449 | regulator-boot-on; | |
450 | }; | |
451 | ||
452 | ldoln_reg: ldoln { | |
453 | /* VDDA_1V8_PLL */ | |
454 | regulator-name = "ldoln"; | |
455 | regulator-min-microvolt = <1800000>; | |
456 | regulator-max-microvolt = <1800000>; | |
457 | regulator-always-on; | |
458 | regulator-boot-on; | |
459 | }; | |
460 | ||
461 | ldousb_reg: ldousb { | |
462 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
463 | regulator-name = "ldousb"; | |
464 | regulator-min-microvolt = <3300000>; | |
465 | regulator-max-microvolt = <3300000>; | |
466 | regulator-boot-on; | |
467 | }; | |
468 | ||
469 | regen1: regen1 { | |
470 | /* VDD_3V3_ON */ | |
471 | regulator-name = "regen1"; | |
472 | regulator-boot-on; | |
473 | regulator-always-on; | |
474 | }; | |
475 | }; | |
476 | }; | |
477 | ||
478 | tps659038_rtc: tps659038_rtc { | |
479 | compatible = "ti,palmas-rtc"; | |
480 | interrupt-parent = <&tps659038>; | |
481 | interrupts = <8 IRQ_TYPE_EDGE_FALLING>; | |
482 | wakeup-source; | |
483 | }; | |
484 | ||
485 | tps659038_pwr_button: tps659038_pwr_button { | |
486 | compatible = "ti,palmas-pwrbutton"; | |
487 | interrupt-parent = <&tps659038>; | |
488 | interrupts = <1 IRQ_TYPE_EDGE_FALLING>; | |
489 | wakeup-source; | |
490 | ti,palmas-long-press-seconds = <12>; | |
491 | }; | |
7a03f2c0 NM |
492 | |
493 | tps659038_gpio: tps659038_gpio { | |
494 | compatible = "ti,palmas-gpio"; | |
495 | gpio-controller; | |
496 | #gpio-cells = <2>; | |
497 | }; | |
5a0f93c6 NM |
498 | }; |
499 | ||
500 | tmp102: tmp102@48 { | |
501 | compatible = "ti,tmp102"; | |
502 | reg = <0x48>; | |
503 | pinctrl-names = "default"; | |
504 | pinctrl-0 = <&tmp102_pins_default>; | |
505 | interrupt-parent = <&gpio7>; | |
506 | interrupts = <16 IRQ_TYPE_LEVEL_LOW>; | |
d723cfea | 507 | #thermal-sensor-cells = <1>; |
5a0f93c6 NM |
508 | }; |
509 | }; | |
510 | ||
511 | &i2c3 { | |
512 | status = "okay"; | |
513 | pinctrl-names = "default"; | |
514 | pinctrl-0 = <&i2c3_pins_default>; | |
515 | clock-frequency = <400000>; | |
516 | ||
517 | mcp_rtc: rtc@6f { | |
518 | compatible = "microchip,mcp7941x"; | |
519 | reg = <0x6f>; | |
e7a73573 | 520 | interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ |
5a0f93c6 NM |
521 | |
522 | pinctrl-names = "default"; | |
523 | pinctrl-0 = <&mcp79410_pins_default>; | |
524 | ||
525 | vcc-supply = <&vdd_3v3>; | |
526 | wakeup-source; | |
527 | }; | |
528 | }; | |
529 | ||
530 | &gpio7 { | |
531 | ti,no-reset-on-init; | |
532 | ti,no-idle-on-init; | |
533 | }; | |
534 | ||
535 | &cpu0 { | |
536 | cpu0-supply = <&smps12_reg>; | |
537 | voltage-tolerance = <1>; | |
538 | }; | |
539 | ||
540 | &uart3 { | |
541 | status = "okay"; | |
783d3186 | 542 | interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
5eb67198 | 543 | <&dra7_pmx_core 0x3f8>; |
5a0f93c6 NM |
544 | |
545 | pinctrl-names = "default"; | |
546 | pinctrl-0 = <&uart3_pins_default>; | |
547 | }; | |
548 | ||
a75dacf8 FB |
549 | &mac { |
550 | status = "okay"; | |
551 | pinctrl-names = "default", "sleep"; | |
552 | pinctrl-0 = <&cpsw_pins_default>; | |
553 | pinctrl-1 = <&cpsw_pins_sleep>; | |
554 | dual_emac; | |
555 | }; | |
556 | ||
557 | &cpsw_emac0 { | |
558 | phy_id = <&davinci_mdio>, <1>; | |
559 | phy-mode = "rgmii"; | |
560 | dual_emac_res_vlan = <1>; | |
561 | }; | |
562 | ||
563 | &cpsw_emac1 { | |
564 | phy_id = <&davinci_mdio>, <2>; | |
565 | phy-mode = "rgmii"; | |
566 | dual_emac_res_vlan = <2>; | |
567 | }; | |
568 | ||
569 | &davinci_mdio { | |
570 | pinctrl-names = "default", "sleep"; | |
571 | pinctrl-0 = <&davinci_mdio_pins_default>; | |
572 | pinctrl-1 = <&davinci_mdio_pins_sleep>; | |
573 | }; | |
574 | ||
5a0f93c6 NM |
575 | &mmc1 { |
576 | status = "okay"; | |
577 | ||
578 | pinctrl-names = "default"; | |
579 | pinctrl-0 = <&mmc1_pins_default>; | |
580 | ||
581 | vmmc-supply = <&ldo1_reg>; | |
582 | vmmc_aux-supply = <&vdd_3v3>; | |
5a0f93c6 NM |
583 | bus-width = <4>; |
584 | cd-gpios = <&gpio6 27 0>; /* gpio 219 */ | |
585 | }; | |
586 | ||
587 | &mmc2 { | |
588 | status = "okay"; | |
589 | ||
590 | pinctrl-names = "default"; | |
591 | pinctrl-0 = <&mmc2_pins_default>; | |
592 | ||
593 | vmmc-supply = <&vdd_3v3>; | |
594 | bus-width = <8>; | |
595 | ti,non-removable; | |
596 | cap-mmc-dual-data-rate; | |
597 | }; | |
598 | ||
599 | &sata { | |
600 | status = "okay"; | |
601 | }; | |
602 | ||
603 | &usb2_phy1 { | |
604 | phy-supply = <&ldousb_reg>; | |
605 | }; | |
606 | ||
9ab402ae RQ |
607 | &usb2_phy2 { |
608 | phy-supply = <&ldousb_reg>; | |
609 | }; | |
610 | ||
5a0f93c6 NM |
611 | &usb1 { |
612 | dr_mode = "host"; | |
613 | pinctrl-names = "default"; | |
614 | pinctrl-0 = <&usb1_pins>; | |
615 | }; | |
f60db98e | 616 | |
a7b0aa19 RQ |
617 | &omap_dwc3_1 { |
618 | extcon = <&extcon_usb1>; | |
619 | }; | |
620 | ||
621 | &omap_dwc3_2 { | |
622 | extcon = <&extcon_usb2>; | |
623 | }; | |
624 | ||
726806ad RQ |
625 | &usb2 { |
626 | dr_mode = "peripheral"; | |
627 | }; | |
d723cfea NM |
628 | |
629 | &cpu_trips { | |
630 | cpu_alert1: cpu_alert1 { | |
631 | temperature = <50000>; /* millicelsius */ | |
632 | hysteresis = <2000>; /* millicelsius */ | |
633 | type = "active"; | |
634 | }; | |
635 | }; | |
636 | ||
637 | &cpu_cooling_maps { | |
638 | map1 { | |
639 | trip = <&cpu_alert1>; | |
640 | cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
641 | }; | |
642 | }; | |
643 | ||
644 | &thermal_zones { | |
645 | board_thermal: board_thermal { | |
646 | polling-delay-passive = <1250>; /* milliseconds */ | |
647 | polling-delay = <1500>; /* milliseconds */ | |
648 | ||
649 | /* sensor ID */ | |
650 | thermal-sensors = <&tmp102 0>; | |
651 | ||
652 | board_trips: trips { | |
653 | board_alert0: board_alert { | |
654 | temperature = <40000>; /* millicelsius */ | |
655 | hysteresis = <2000>; /* millicelsius */ | |
656 | type = "active"; | |
657 | }; | |
658 | ||
659 | board_crit: board_crit { | |
660 | temperature = <105000>; /* millicelsius */ | |
661 | hysteresis = <0>; /* millicelsius */ | |
662 | type = "critical"; | |
663 | }; | |
664 | }; | |
665 | ||
666 | board_cooling_maps: cooling-maps { | |
667 | map0 { | |
668 | trip = <&board_alert0>; | |
669 | cooling-device = | |
670 | <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
671 | }; | |
672 | }; | |
673 | }; | |
674 | }; | |
0c534938 TV |
675 | |
676 | &dss { | |
677 | status = "ok"; | |
678 | ||
679 | vdda_video-supply = <&ldoln_reg>; | |
680 | }; | |
681 | ||
682 | &hdmi { | |
683 | status = "ok"; | |
684 | vdda-supply = <&ldo3_reg>; | |
685 | ||
686 | pinctrl-names = "default"; | |
687 | pinctrl-0 = <&hdmi_pins>; | |
688 | ||
689 | port { | |
690 | hdmi_out: endpoint { | |
691 | remote-endpoint = <&tpd12s015_in>; | |
692 | }; | |
693 | }; | |
694 | }; | |
73c8f0cb KVA |
695 | |
696 | &pcie1 { | |
697 | gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; | |
698 | }; |