projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 2344a29a AE |
1 | /* |
| 2 | * Device Tree file for NETGEAR ReadyNAS 102 | |
| 3 | * | |
| 4 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> | |
| 5 | * | |
| 6 | * This program is free software; you can redistribute it and/or | |
| 7 | * modify it under the terms of the GNU General Public License | |
| 8 | * as published by the Free Software Foundation; either version | |
| 9 | * 2 of the License, or (at your option) any later version. | |
| 10 | */ | |
| 11 | ||
| 12 | /dts-v1/; | |
| 13 | ||
| 3d0ed759 | 14 | #include "armada-370.dtsi" |
| 2344a29a AE |
15 | |
| 16 | / { | |
| 17 | model = "NETGEAR ReadyNAS 102"; | |
| 18 | compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; | |
| 19 | ||
| 20 | chosen { | |
| 21 | bootargs = "console=ttyS0,115200 earlyprintk"; | |
| 22 | }; | |
| 23 | ||
| 24 | memory { | |
| 25 | device_type = "memory"; | |
| 26 | reg = <0x00000000 0x20000000>; /* 512 MB */ | |
| 27 | }; | |
| 28 | ||
| 29 | soc { | |
| b643f858 AE |
30 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
| 31 | MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; | |
| 32 | ||
| 33 | pcie-controller { | |
| 34 | status = "okay"; | |
| 35 | ||
| 36 | /* Connected to Marvell SATA controller */ | |
| 37 | pcie@1,0 { | |
| 38 | /* Port 0, Lane 0 */ | |
| 39 | status = "okay"; | |
| 40 | }; | |
| 41 | ||
| 42 | /* Connected to FL1009 USB 3.0 controller */ | |
| 43 | pcie@2,0 { | |
| 44 | /* Port 1, Lane 0 */ | |
| 45 | status = "okay"; | |
| 46 | }; | |
| 47 | }; | |
| 48 | ||
| 2344a29a AE |
49 | internal-regs { |
| 50 | serial@12000 { | |
| 51 | clock-frequency = <200000000>; | |
| 52 | status = "okay"; | |
| 53 | }; | |
| 54 | ||
| 55 | sata@a0000 { | |
| 56 | nr-ports = <2>; | |
| 57 | status = "okay"; | |
| 58 | }; | |
| 59 | ||
| 60 | pinctrl { | |
| 61 | power_led_pin: power-led-pin { | |
| 62 | marvell,pins = "mpp57"; | |
| 63 | marvell,function = "gpio"; | |
| 64 | }; | |
| 65 | sata1_led_pin: sata1-led-pin { | |
| 66 | marvell,pins = "mpp15"; | |
| 67 | marvell,function = "gpio"; | |
| 68 | }; | |
| 69 | ||
| 70 | sata2_led_pin: sata2-led-pin { | |
| 71 | marvell,pins = "mpp14"; | |
| 72 | marvell,function = "gpio"; | |
| 73 | }; | |
| 74 | ||
| 75 | backup_led_pin: backup-led-pin { | |
| 76 | marvell,pins = "mpp56"; | |
| 77 | marvell,function = "gpio"; | |
| 78 | }; | |
| 2832cf25 AE |
79 | |
| 80 | poweroff: poweroff { | |
| 81 | marvell,pins = "mpp8"; | |
| 82 | marvell,function = "gpio"; | |
| 83 | }; | |
| 2344a29a AE |
84 | }; |
| 85 | ||
| 86 | mdio { | |
| 87 | phy0: ethernet-phy@0 { | |
| 88 | reg = <0>; | |
| 89 | }; | |
| 90 | }; | |
| 91 | ||
| 92 | ethernet@74000 { | |
| 93 | status = "okay"; | |
| 94 | phy = <&phy0>; | |
| 95 | phy-mode = "rgmii-id"; | |
| 96 | }; | |
| 97 | ||
| 98 | usb@50000 { | |
| 99 | status = "okay"; | |
| 100 | }; | |
| 101 | ||
| 102 | i2c@11000 { | |
| 103 | compatible = "marvell,mv64xxx-i2c"; | |
| 104 | clock-frequency = <100000>; | |
| 105 | status = "okay"; | |
| 106 | ||
| 107 | g762: g762@3e { | |
| 108 | compatible = "gmt,g762"; | |
| 109 | reg = <0x3e>; | |
| 110 | clocks = <&g762_clk>; /* input clock */ | |
| 111 | fan_gear_mode = <0>; | |
| 112 | fan_startv = <1>; | |
| 113 | pwm_polarity = <0>; | |
| 114 | }; | |
| 115 | }; | |
| 2344a29a AE |
116 | }; |
| 117 | }; | |
| 118 | ||
| 119 | clocks { | |
| 120 | #address-cells = <1>; | |
| 121 | #size-cells = <0>; | |
| 122 | ||
| 123 | g762_clk: fixedclk { | |
| 124 | compatible = "fixed-clock"; | |
| 125 | #clock-cells = <0>; | |
| 126 | clock-frequency = <8192>; | |
| 127 | }; | |
| 128 | }; | |
| 129 | ||
| 130 | gpio_leds { | |
| 131 | compatible = "gpio-leds"; | |
| 132 | pinctrl-0 = < &power_led_pin | |
| 133 | &sata1_led_pin | |
| 134 | &sata2_led_pin | |
| 135 | &backup_led_pin >; | |
| 136 | pinctrl-names = "default"; | |
| 137 | ||
| 138 | blue_power_led { | |
| 139 | label = "rn102:blue:pwr"; | |
| 140 | gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ | |
| 141 | linux,default-trigger = "heartbeat"; | |
| 142 | }; | |
| 143 | ||
| 144 | green_sata1_led { | |
| 145 | label = "rn102:green:sata1"; | |
| 146 | gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ | |
| 147 | default-state = "on"; | |
| 148 | }; | |
| 149 | ||
| 150 | green_sata2_led { | |
| 151 | label = "rn102:green:sata2"; | |
| 152 | gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ | |
| 153 | default-state = "on"; | |
| 154 | }; | |
| 155 | ||
| 156 | green_backup_led { | |
| 157 | label = "rn102:green:backup"; | |
| 158 | gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ | |
| 159 | default-state = "on"; | |
| 160 | }; | |
| 161 | }; | |
| 162 | ||
| 163 | gpio_keys { | |
| 164 | compatible = "gpio-keys"; | |
| 165 | #address-cells = <1>; | |
| 166 | #size-cells = <0>; | |
| 167 | ||
| 168 | button@1 { | |
| 169 | label = "Power Button"; | |
| 170 | linux,code = <116>; /* KEY_POWER */ | |
| aa06a5ad | 171 | gpios = <&gpio1 30 0>; |
| 2344a29a AE |
172 | }; |
| 173 | ||
| 174 | button@2 { | |
| 175 | label = "Reset Button"; | |
| 176 | linux,code = <0x198>; /* KEY_RESTART */ | |
| 177 | gpios = <&gpio0 6 1>; | |
| 178 | }; | |
| 179 | ||
| 180 | button@3 { | |
| 181 | label = "Backup Button"; | |
| 182 | linux,code = <133>; /* KEY_COPY */ | |
| 183 | gpios = <&gpio1 26 1>; | |
| 184 | }; | |
| 185 | }; | |
| 186 | ||
| 2832cf25 AE |
187 | gpio_poweroff { |
| 188 | compatible = "gpio-poweroff"; | |
| 189 | pinctrl-0 = <&poweroff>; | |
| 190 | pinctrl-names = "default"; | |
| 191 | gpios = <&gpio0 8 1>; | |
| 192 | }; | |
| 193 | ||
| 2344a29a | 194 | }; |