Commit | Line | Data |
---|---|---|
22b5a0f7 NF |
1 | /* |
2 | * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board | |
3 | * | |
4 | * Copyright (C) 2015 Atmel, | |
5 | * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> | |
6 | * | |
7 | * This file is dual-licensed: you can use it either under the terms | |
8 | * of the GPL or the X11 license, at your option. Note that this dual | |
9 | * licensing only applies to this file, and not this project as a | |
10 | * whole. | |
11 | * | |
12 | * a) This file is free software; you can redistribute it and/or | |
13 | * modify it under the terms of the GNU General Public License as | |
14 | * published by the Free Software Foundation; either version 2 of the | |
15 | * License, or (at your option) any later version. | |
16 | * | |
17 | * This file is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * Or, alternatively, | |
23 | * | |
24 | * b) Permission is hereby granted, free of charge, to any person | |
25 | * obtaining a copy of this software and associated documentation | |
26 | * files (the "Software"), to deal in the Software without | |
27 | * restriction, including without limitation the rights to use, | |
28 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
29 | * sell copies of the Software, and to permit persons to whom the | |
30 | * Software is furnished to do so, subject to the following | |
31 | * conditions: | |
32 | * | |
33 | * The above copyright notice and this permission notice shall be | |
34 | * included in all copies or substantial portions of the Software. | |
35 | * | |
36 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
37 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
38 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
39 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
40 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
41 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
42 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
43 | * OTHER DEALINGS IN THE SOFTWARE. | |
44 | */ | |
45 | /dts-v1/; | |
46 | #include "sama5d2.dtsi" | |
a9b672a6 | 47 | #include "sama5d2-pinfunc.h" |
13e2a6fd | 48 | #include <dt-bindings/mfd/atmel-flexcom.h> |
ff964962 | 49 | #include <dt-bindings/gpio/gpio.h> |
22b5a0f7 NF |
50 | |
51 | / { | |
52 | model = "Atmel SAMA5D2 Xplained"; | |
53 | compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; | |
54 | ||
55 | chosen { | |
56 | stdout-path = "serial0:115200n8"; | |
57 | }; | |
58 | ||
59 | memory { | |
60 | reg = <0x20000000 0x80000>; | |
61 | }; | |
62 | ||
63 | clocks { | |
22b5a0f7 NF |
64 | slow_xtal { |
65 | clock-frequency = <32768>; | |
66 | }; | |
67 | ||
68 | main_xtal { | |
69 | clock-frequency = <12000000>; | |
70 | }; | |
71 | }; | |
72 | ||
73 | ahb { | |
74 | usb0: gadget@00300000 { | |
ff964962 CP |
75 | atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; |
76 | pinctrl-names = "default"; | |
77 | pinctrl-0 = <&pinctrl_usba_vbus>; | |
22b5a0f7 NF |
78 | status = "okay"; |
79 | }; | |
80 | ||
81 | usb1: ohci@00400000 { | |
82 | num-ports = <3>; | |
ff964962 CP |
83 | atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ |
84 | &pioA 42 GPIO_ACTIVE_HIGH | |
85 | 0 | |
86 | >; | |
87 | pinctrl-names = "default"; | |
88 | pinctrl-0 = <&pinctrl_usb_default>; | |
22b5a0f7 NF |
89 | status = "okay"; |
90 | }; | |
91 | ||
92 | usb2: ehci@00500000 { | |
93 | status = "okay"; | |
94 | }; | |
95 | ||
13e2a6fd LD |
96 | sdmmc0: sdio-host@a0000000 { |
97 | bus-width = <8>; | |
98 | pinctrl-names = "default"; | |
99 | pinctrl-0 = <&pinctrl_sdmmc0_default>; | |
100 | non-removable; | |
101 | mmc-ddr-1_8v; | |
102 | status = "okay"; | |
103 | }; | |
104 | ||
105 | sdmmc1: sdio-host@b0000000 { | |
106 | bus-width = <4>; | |
107 | pinctrl-names = "default"; | |
108 | pinctrl-0 = <&pinctrl_sdmmc1_default>; | |
109 | status = "okay"; /* conflict with qspi0 */ | |
110 | }; | |
111 | ||
22b5a0f7 NF |
112 | apb { |
113 | spi0: spi@f8000000 { | |
a9b672a6 LD |
114 | pinctrl-names = "default"; |
115 | pinctrl-0 = <&pinctrl_spi0_default>; | |
22b5a0f7 NF |
116 | status = "okay"; |
117 | ||
118 | m25p80@0 { | |
119 | compatible = "atmel,at25df321a"; | |
120 | reg = <0>; | |
121 | spi-max-frequency = <50000000>; | |
122 | }; | |
123 | }; | |
124 | ||
125 | macb0: ethernet@f8008000 { | |
a9b672a6 | 126 | pinctrl-names = "default"; |
6c482fd1 | 127 | pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; |
22b5a0f7 NF |
128 | phy-mode = "rmii"; |
129 | status = "okay"; | |
6c482fd1 NF |
130 | |
131 | ethernet-phy@1 { | |
132 | reg = <0x1>; | |
133 | interrupt-parent = <&pioA>; | |
134 | interrupts = <73 IRQ_TYPE_LEVEL_LOW>; | |
135 | }; | |
22b5a0f7 NF |
136 | }; |
137 | ||
ca6349a8 SW |
138 | pdmic@f8018000 { |
139 | pinctrl-names = "default"; | |
140 | pinctrl-0 = <&pinctrl_pdmic_default>; | |
141 | atmel,model = "PDMIC @ sama5d2_xplained"; | |
142 | atmel,mic-min-freq = <1000000>; | |
143 | atmel,mic-max-freq = <3246000>; | |
144 | atmel,mic-offset = <0x0>; | |
145 | status = "okay"; | |
146 | }; | |
147 | ||
22b5a0f7 | 148 | uart1: serial@f8020000 { |
a9b672a6 LD |
149 | pinctrl-names = "default"; |
150 | pinctrl-0 = <&pinctrl_uart1_default>; | |
22b5a0f7 NF |
151 | status = "okay"; |
152 | }; | |
153 | ||
154 | i2c0: i2c@f8028000 { | |
155 | dmas = <0>, <0>; | |
a9b672a6 LD |
156 | pinctrl-names = "default"; |
157 | pinctrl-0 = <&pinctrl_i2c0_default>; | |
0a804b57 | 158 | i2c-sda-hold-time-ns = <350>; |
22b5a0f7 | 159 | status = "okay"; |
143877e6 WY |
160 | |
161 | pmic: act8865@5b { | |
162 | compatible = "active-semi,act8865"; | |
163 | reg = <0x5b>; | |
164 | active-semi,vsel-high; | |
165 | status = "okay"; | |
166 | ||
167 | regulators { | |
168 | vdd_1v35_reg: DCDC_REG1 { | |
169 | regulator-name = "VDD_1V35"; | |
170 | regulator-min-microvolt = <1350000>; | |
171 | regulator-max-microvolt = <1350000>; | |
172 | regulator-always-on; | |
173 | }; | |
174 | ||
175 | vdd_1v2_reg: DCDC_REG2 { | |
176 | regulator-name = "VDD_1V2"; | |
177 | regulator-min-microvolt = <1100000>; | |
178 | regulator-max-microvolt = <1300000>; | |
179 | regulator-always-on; | |
180 | }; | |
181 | ||
182 | vdd_3v3_reg: DCDC_REG3 { | |
183 | regulator-name = "VDD_3V3"; | |
184 | regulator-min-microvolt = <3300000>; | |
185 | regulator-max-microvolt = <3300000>; | |
186 | regulator-always-on; | |
187 | }; | |
188 | ||
189 | vdd_fuse_reg: LDO_REG1 { | |
190 | regulator-name = "VDD_FUSE"; | |
191 | regulator-min-microvolt = <2500000>; | |
192 | regulator-max-microvolt = <2500000>; | |
193 | regulator-always-on; | |
194 | }; | |
195 | ||
196 | vdd_3v3_lp_reg: LDO_REG2 { | |
197 | regulator-name = "VDD_3V3_LP"; | |
198 | regulator-min-microvolt = <3300000>; | |
199 | regulator-max-microvolt = <3300000>; | |
200 | regulator-always-on; | |
201 | }; | |
202 | ||
203 | vdd_led_reg: LDO_REG3 { | |
204 | regulator-name = "VDD_LED"; | |
205 | regulator-min-microvolt = <3300000>; | |
206 | regulator-max-microvolt = <3300000>; | |
207 | regulator-always-on; | |
208 | }; | |
209 | ||
210 | vdd_sdhc_1v8_reg: LDO_REG4 { | |
211 | regulator-name = "VDD_SDHC_1V8"; | |
212 | regulator-min-microvolt = <1800000>; | |
213 | regulator-max-microvolt = <1800000>; | |
863c1ca7 | 214 | regulator-always-on; |
143877e6 WY |
215 | }; |
216 | }; | |
217 | }; | |
22b5a0f7 NF |
218 | }; |
219 | ||
13e2a6fd LD |
220 | flx0: flexcom@f8034000 { |
221 | atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; | |
222 | status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ | |
223 | ||
224 | uart5: serial@200 { | |
225 | compatible = "atmel,at91sam9260-usart"; | |
226 | reg = <0x200 0x200>; | |
227 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; | |
228 | clocks = <&flx0_clk>; | |
229 | clock-names = "usart"; | |
230 | pinctrl-names = "default"; | |
231 | pinctrl-0 = <&pinctrl_flx0_default>; | |
232 | atmel,fifo-size = <32>; | |
233 | status = "okay"; | |
234 | }; | |
235 | }; | |
236 | ||
e4b9a21b NF |
237 | shdwc@f8048010 { |
238 | atmel,shdwc-debouncer = <976>; | |
239 | ||
240 | input@0 { | |
241 | reg = <0>; | |
242 | atmel,wakeup-type = "low"; | |
243 | }; | |
244 | }; | |
245 | ||
92bd7aa4 WY |
246 | watchdog@f8048040 { |
247 | status = "okay"; | |
248 | }; | |
249 | ||
22b5a0f7 | 250 | uart3: serial@fc008000 { |
a9b672a6 LD |
251 | pinctrl-names = "default"; |
252 | pinctrl-0 = <&pinctrl_uart3_default>; | |
22b5a0f7 NF |
253 | status = "okay"; |
254 | }; | |
255 | ||
13e2a6fd LD |
256 | flx4: flexcom@fc018000 { |
257 | atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; | |
258 | status = "okay"; | |
259 | ||
260 | i2c2: i2c@600 { | |
261 | compatible = "atmel,sama5d2-i2c"; | |
262 | reg = <0x600 0x200>; | |
263 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; | |
264 | dmas = <0>, <0>; | |
265 | dma-names = "tx", "rx"; | |
266 | #address-cells = <1>; | |
267 | #size-cells = <0>; | |
268 | clocks = <&flx4_clk>; | |
269 | pinctrl-names = "default"; | |
270 | pinctrl-0 = <&pinctrl_flx4_default>; | |
271 | atmel,fifo-size = <16>; | |
272 | status = "okay"; | |
273 | }; | |
274 | }; | |
275 | ||
22b5a0f7 NF |
276 | i2c1: i2c@fc028000 { |
277 | dmas = <0>, <0>; | |
a9b672a6 LD |
278 | pinctrl-names = "default"; |
279 | pinctrl-0 = <&pinctrl_i2c1_default>; | |
22b5a0f7 NF |
280 | status = "okay"; |
281 | ||
282 | at24@54 { | |
283 | compatible = "atmel,24c02"; | |
284 | reg = <0x54>; | |
285 | pagesize = <16>; | |
286 | }; | |
287 | }; | |
a9b672a6 | 288 | |
5e72c25b LD |
289 | adc: adc@fc030000 { |
290 | vddana-supply = <&vdd_3v3_lp_reg>; | |
291 | vref-supply = <&vdd_3v3_lp_reg>; | |
292 | pinctrl-names = "default"; | |
293 | pinctrl-0 = <&pinctrl_adc_default>; | |
294 | status = "okay"; | |
295 | }; | |
296 | ||
a9b672a6 | 297 | pinctrl@fc038000 { |
5e72c25b LD |
298 | /* |
299 | * There is no real pinmux for ADC, if the pin | |
300 | * is not requested by another peripheral then | |
301 | * the muxing is done when channel is enabled. | |
302 | * Requesting pins for ADC is GPIO is | |
303 | * encouraged to prevent conflicts and to | |
304 | * disable bias in order to be in the same | |
305 | * state when the pin is not muxed to the adc. | |
306 | */ | |
307 | pinctrl_adc_default: adc_default { | |
308 | pinmux = <PIN_PD23__GPIO>; | |
309 | bias-disable; | |
310 | }; | |
311 | ||
13e2a6fd LD |
312 | pinctrl_flx0_default: flx0_default { |
313 | pinmux = <PIN_PB28__FLEXCOM0_IO0>, | |
314 | <PIN_PB29__FLEXCOM0_IO1>; | |
315 | bias-disable; | |
316 | }; | |
317 | ||
318 | pinctrl_flx4_default: flx4_default { | |
319 | pinmux = <PIN_PD12__FLEXCOM4_IO0>, | |
320 | <PIN_PD13__FLEXCOM4_IO1>; | |
321 | bias-disable; | |
322 | }; | |
323 | ||
a9b672a6 LD |
324 | pinctrl_i2c0_default: i2c0_default { |
325 | pinmux = <PIN_PD21__TWD0>, | |
326 | <PIN_PD22__TWCK0>; | |
327 | bias-disable; | |
328 | }; | |
329 | ||
330 | pinctrl_i2c1_default: i2c1_default { | |
331 | pinmux = <PIN_PD4__TWD1>, | |
332 | <PIN_PD5__TWCK1>; | |
333 | bias-disable; | |
334 | }; | |
335 | ||
c7e48d44 LD |
336 | pinctrl_key_gpio_default: key_gpio_default { |
337 | pinmux = <PIN_PB9__GPIO>; | |
338 | bias-pull-up; | |
339 | }; | |
340 | ||
ed0f4b3f WY |
341 | pinctrl_led_gpio_default: led_gpio_default { |
342 | pinmux = <PIN_PB0__GPIO>, | |
343 | <PIN_PB5__GPIO>, | |
344 | <PIN_PB6__GPIO>; | |
345 | bias-pull-up; | |
346 | }; | |
347 | ||
a9b672a6 LD |
348 | pinctrl_macb0_default: macb0_default { |
349 | pinmux = <PIN_PB14__GTXCK>, | |
350 | <PIN_PB15__GTXEN>, | |
351 | <PIN_PB16__GRXDV>, | |
352 | <PIN_PB17__GRXER>, | |
353 | <PIN_PB18__GRX0>, | |
354 | <PIN_PB19__GRX1>, | |
355 | <PIN_PB20__GTX0>, | |
356 | <PIN_PB21__GTX1>, | |
357 | <PIN_PB22__GMDC>, | |
358 | <PIN_PB23__GMDIO>; | |
359 | bias-disable; | |
360 | }; | |
361 | ||
6c482fd1 NF |
362 | pinctrl_macb0_phy_irq: macb0_phy_irq { |
363 | pinmux = <PIN_PC9__GPIO>; | |
34ff2dc7 | 364 | bias-disable; |
6c482fd1 NF |
365 | }; |
366 | ||
ca6349a8 SW |
367 | pinctrl_pdmic_default: pdmic_default { |
368 | pinmux = <PIN_PB26__PDMIC_DAT>, | |
369 | <PIN_PB27__PDMIC_CLK>; | |
370 | bias-disable; | |
371 | }; | |
372 | ||
13e2a6fd LD |
373 | pinctrl_sdmmc0_default: sdmmc0_default { |
374 | cmd_data { | |
375 | pinmux = <PIN_PA1__SDMMC0_CMD>, | |
376 | <PIN_PA2__SDMMC0_DAT0>, | |
377 | <PIN_PA3__SDMMC0_DAT1>, | |
378 | <PIN_PA4__SDMMC0_DAT2>, | |
379 | <PIN_PA5__SDMMC0_DAT3>, | |
380 | <PIN_PA6__SDMMC0_DAT4>, | |
381 | <PIN_PA7__SDMMC0_DAT5>, | |
382 | <PIN_PA8__SDMMC0_DAT6>, | |
383 | <PIN_PA9__SDMMC0_DAT7>; | |
384 | bias-pull-up; | |
385 | }; | |
386 | ||
387 | ck_cd_rstn_vddsel { | |
388 | pinmux = <PIN_PA0__SDMMC0_CK>, | |
389 | <PIN_PA10__SDMMC0_RSTN>, | |
390 | <PIN_PA11__SDMMC0_VDDSEL>, | |
391 | <PIN_PA13__SDMMC0_CD>; | |
392 | bias-disable; | |
393 | }; | |
394 | }; | |
395 | ||
396 | pinctrl_sdmmc1_default: sdmmc1_default { | |
397 | cmd_data { | |
398 | pinmux = <PIN_PA28__SDMMC1_CMD>, | |
399 | <PIN_PA18__SDMMC1_DAT0>, | |
400 | <PIN_PA19__SDMMC1_DAT1>, | |
401 | <PIN_PA20__SDMMC1_DAT2>, | |
402 | <PIN_PA21__SDMMC1_DAT3>; | |
403 | bias-pull-up; | |
404 | }; | |
405 | ||
406 | conf-ck_cd { | |
407 | pinmux = <PIN_PA22__SDMMC1_CK>, | |
408 | <PIN_PA30__SDMMC1_CD>; | |
409 | bias-disable; | |
410 | }; | |
411 | }; | |
412 | ||
a9b672a6 LD |
413 | pinctrl_spi0_default: spi0_default { |
414 | pinmux = <PIN_PA14__SPI0_SPCK>, | |
415 | <PIN_PA15__SPI0_MOSI>, | |
416 | <PIN_PA16__SPI0_MISO>, | |
417 | <PIN_PA17__SPI0_NPCS0>; | |
418 | bias-disable; | |
419 | }; | |
420 | ||
421 | pinctrl_uart1_default: uart1_default { | |
422 | pinmux = <PIN_PD2__URXD1>, | |
423 | <PIN_PD3__UTXD1>; | |
424 | bias-disable; | |
425 | }; | |
426 | ||
427 | pinctrl_uart3_default: uart3_default { | |
428 | pinmux = <PIN_PB11__URXD3>, | |
429 | <PIN_PB12__UTXD3>; | |
430 | bias-disable; | |
431 | }; | |
ff964962 CP |
432 | |
433 | pinctrl_usb_default: usb_default { | |
434 | pinmux = <PIN_PB10__GPIO>; | |
435 | bias-disable; | |
436 | }; | |
437 | ||
438 | pinctrl_usba_vbus: usba_vbus { | |
439 | pinmux = <PIN_PA31__GPIO>; | |
440 | bias-disable; | |
441 | }; | |
442 | ||
a9b672a6 | 443 | }; |
22b5a0f7 NF |
444 | }; |
445 | }; | |
c7e48d44 LD |
446 | |
447 | gpio_keys { | |
448 | compatible = "gpio-keys"; | |
449 | ||
450 | pinctrl-names = "default"; | |
451 | pinctrl-0 = <&pinctrl_key_gpio_default>; | |
452 | ||
453 | bp1 { | |
454 | label = "PB_USER"; | |
455 | gpios = <&pioA 41 GPIO_ACTIVE_LOW>; | |
456 | linux,code = <0x104>; | |
457 | }; | |
458 | }; | |
ed0f4b3f WY |
459 | |
460 | leds { | |
461 | compatible = "gpio-leds"; | |
462 | pinctrl-names = "default"; | |
463 | pinctrl-0 = <&pinctrl_led_gpio_default>; | |
464 | status = "okay"; | |
465 | ||
466 | red { | |
467 | label = "red"; | |
468 | gpios = <&pioA 38 GPIO_ACTIVE_LOW>; | |
469 | }; | |
470 | ||
471 | green { | |
472 | label = "green"; | |
473 | gpios = <&pioA 37 GPIO_ACTIVE_LOW>; | |
474 | }; | |
475 | ||
476 | blue { | |
477 | label = "blue"; | |
478 | gpios = <&pioA 32 GPIO_ACTIVE_LOW>; | |
479 | linux,default-trigger = "heartbeat"; | |
480 | }; | |
481 | }; | |
22b5a0f7 | 482 | }; |