[deliverable/linux.git] / arch / arm / boot / dts / at91sam9260.dtsi

/*
 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
 *
 *  Copyright (C) 2011 Atmel,
 *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
 *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 *
 * Licensed under GPLv2 or later.
 */

/include/ "skeleton.dtsi"

/ {
	model = "Atmel AT91SAM9260 family SoC";
	compatible = "atmel,at91sam9260";
	interrupt-parent = <&aic>;

	aliases {
		serial0 = &dbgu;
		serial1 = &usart0;
		serial2 = &usart1;
		serial3 = &usart2;
		serial4 = &usart3;
		serial5 = &uart0;
		serial6 = &uart1;
		gpio0 = &pioA;
		gpio1 = &pioB;
		gpio2 = &pioC;
		tcb0 = &tcb0;
		tcb1 = &tcb1;
		i2c0 = &i2c0;
	};
	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	memory {
		reg = <0x20000000 0x04000000>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		apb {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			aic: interrupt-controller@fffff000 {
				#interrupt-cells = <3>;
				compatible = "atmel,at91rm9200-aic";
				interrupt-controller;
				reg = <0xfffff000 0x200>;
				atmel,external-irqs = <29 30 31>;
			};

			ramc0: ramc@ffffea00 {
				compatible = "atmel,at91sam9260-sdramc";
				reg = <0xffffea00 0x200>;
			};

			pmc: pmc@fffffc00 {
				compatible = "atmel,at91rm9200-pmc";
				reg = <0xfffffc00 0x100>;
			};

			rstc@fffffd00 {
				compatible = "atmel,at91sam9260-rstc";
				reg = <0xfffffd00 0x10>;
			};

			shdwc@fffffd10 {
				compatible = "atmel,at91sam9260-shdwc";
				reg = <0xfffffd10 0x10>;
			};

			pit: timer@fffffd30 {
				compatible = "atmel,at91sam9260-pit";
				reg = <0xfffffd30 0xf>;
				interrupts = <1 4 7>;
			};

			tcb0: timer@fffa0000 {
				compatible = "atmel,at91rm9200-tcb";
				reg = <0xfffa0000 0x100>;
				interrupts = <17 4 0 18 4 0 19 4 0>;
			};

			tcb1: timer@fffdc000 {
				compatible = "atmel,at91rm9200-tcb";
				reg = <0xfffdc000 0x100>;
				interrupts = <26 4 0 27 4 0 28 4 0>;
			};

			pinctrl@fffff400 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
				ranges = <0xfffff400 0xfffff400 0x600>;

				atmel,mux-mask = <
				      /*    A         B     */
				       0xffffffff 0xffc00c3b  /* pioA */
				       0xffffffff 0x7fff3ccf  /* pioB */
				       0xffffffff 0x007fffff  /* pioC */
				      >;

				/* shared pinctrl settings */
				dbgu {
					pinctrl_dbgu: dbgu-0 {
						atmel,pins =
							<1 14 0x1 0x0	/* PB14 periph A */
							 1 15 0x1 0x1>;	/* PB15 periph with pullup */
					};
				};

				usart0 {
					pinctrl_usart0: usart0-0 {
						atmel,pins =
							<1 4 0x1 0x0	/* PB4 periph A */
							 1 5 0x1 0x0>;	/* PB5 periph A */
					};

					pinctrl_usart0_rts: usart0_rts-0 {
						atmel,pins =
							<1 26 0x1 0x0>;	/* PB26 periph A */
					};

					pinctrl_usart0_cts: usart0_cts-0 {
						atmel,pins =
							<1 27 0x1 0x0>;	/* PB27 periph A */
					};

					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
						atmel,pins =
							<1 24 0x1 0x0	/* PB24 periph A */
							 1 22 0x1 0x0>;	/* PB22 periph A */
					};

					pinctrl_usart0_dcd: usart0_dcd-0 {
						atmel,pins =
							<1 23 0x1 0x0>;	/* PB23 periph A */
					};

					pinctrl_usart0_ri: usart0_ri-0 {
						atmel,pins =
							<1 25 0x1 0x0>;	/* PB25 periph A */
					};
				};

				usart1 {
					pinctrl_usart1: usart1-0 {
						atmel,pins =
							<2 6 0x1 0x1	/* PB6 periph A with pullup */
							 2 7 0x1 0x0>;	/* PB7 periph A */
					};

					pinctrl_usart1_rts: usart1_rts-0 {
						atmel,pins =
							<1 28 0x1 0x0>;	/* PB28 periph A */
					};

					pinctrl_usart1_cts: usart1_cts-0 {
						atmel,pins =
							<1 29 0x1 0x0>;	/* PB29 periph A */
					};
				};

				usart2 {
					pinctrl_usart2: usart2-0 {
						atmel,pins =
							<1 8 0x1 0x1	/* PB8 periph A with pullup */
							 1 9 0x1 0x0>;	/* PB9 periph A */
					};

					pinctrl_usart2_rts: usart2_rts-0 {
						atmel,pins =
							<0 4 0x1 0x0>;	/* PA4 periph A */
					};

					pinctrl_usart2_cts: usart2_cts-0 {
						atmel,pins =
							<0 5 0x1 0x0>;	/* PA5 periph A */
					};
				};

				usart3 {
					pinctrl_usart3: usart3-0 {
						atmel,pins =
							<2 10 0x1 0x1	/* PB10 periph A with pullup */
							 2 11 0x1 0x0>;	/* PB11 periph A */
					};

					pinctrl_usart3_rts: usart3_rts-0 {
						atmel,pins =
							<3 8 0x2 0x0>;	/* PB8 periph B */
					};

					pinctrl_usart3_cts: usart3_cts-0 {
						atmel,pins =
							<3 10 0x2 0x0>;	/* PB10 periph B */
					};
				};

				uart0 {
					pinctrl_uart0: uart0-0 {
						atmel,pins =
							<0 31 0x2 0x1	/* PA31 periph B with pullup */
							 0 30 0x2 0x0>;	/* PA30 periph B */
					};
				};

				uart1 {
					pinctrl_uart1: uart1-0 {
						atmel,pins =
							<2 12 0x1 0x1	/* PB12 periph A with pullup */
							 2 13 0x1 0x0>;	/* PB13 periph A */
					};
				};

				nand {
					pinctrl_nand: nand-0 {
						atmel,pins =
							<2 13 0x0 0x1	/* PC13 gpio RDY pin pull_up */
							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
					};
				};

				macb {
					pinctrl_macb_rmii: macb_rmii-0 {
						atmel,pins =
							<0 12 0x1 0x0	/* PA12 periph A */
							 0 13 0x1 0x0	/* PA13 periph A */
							 0 14 0x1 0x0	/* PA14 periph A */
							 0 15 0x1 0x0	/* PA15 periph A */
							 0 16 0x1 0x0	/* PA16 periph A */
							 0 17 0x1 0x0	/* PA17 periph A */
							 0 18 0x1 0x0	/* PA18 periph A */
							 0 19 0x1 0x0	/* PA19 periph A */
							 0 20 0x1 0x0	/* PA20 periph A */
							 0 21 0x1 0x0>;	/* PA21 periph A */
					};

					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
						atmel,pins =
							<0 22 0x2 0x0	/* PA22 periph B */
							 0 23 0x2 0x0	/* PA23 periph B */
							 0 24 0x2 0x0	/* PA24 periph B */
							 0 25 0x2 0x0	/* PA25 periph B */
							 0 26 0x2 0x0	/* PA26 periph B */
							 0 27 0x2 0x0	/* PA27 periph B */
							 0 28 0x2 0x0	/* PA28 periph B */
							 0 29 0x2 0x0>;	/* PA29 periph B */
					};

					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
						atmel,pins =
							<0 10 0x2 0x0	/* PA10 periph B */
							 0 11 0x2 0x0	/* PA11 periph B */
							 0 24 0x2 0x0	/* PA24 periph B */
							 0 25 0x2 0x0	/* PA25 periph B */
							 0 26 0x2 0x0	/* PA26 periph B */
							 0 27 0x2 0x0	/* PA27 periph B */
							 0 28 0x2 0x0	/* PA28 periph B */
							 0 29 0x2 0x0>;	/* PA29 periph B */
					};
				};

				mmc0 {
					pinctrl_mmc0_clk: mmc0_clk-0 {
						atmel,pins =
							<0 8 0x1 0x0>;	/* PA8 periph A */
					};

					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
						atmel,pins =
							<0 7 0x1 0x1	/* PA7 periph A with pullup */
							 0 6 0x1 0x1>;	/* PA6 periph A with pullup */
					};

					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
						atmel,pins =
							<0 9 0x1 0x1	/* PA9 periph A with pullup */
							 0 10 0x1 0x1	/* PA10 periph A with pullup */
							 0 11 0x1 0x1>;	/* PA11 periph A with pullup */
					};

					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
						atmel,pins =
							<0 1 0x2 0x1	/* PA1 periph B with pullup */
							 0 0 0x2 0x1>;	/* PA0 periph B with pullup */
					};

					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
						atmel,pins =
							<0 5 0x2 0x1	/* PA5 periph B with pullup */
							 0 4 0x2 0x1	/* PA4 periph B with pullup */
							 0 3 0x2 0x1>;	/* PA3 periph B with pullup */
					};
				};

				pioA: gpio@fffff400 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff400 0x200>;
					interrupts = <2 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioB: gpio@fffff600 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff600 0x200>;
					interrupts = <3 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioC: gpio@fffff800 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff800 0x200>;
					interrupts = <4 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};
			};

			dbgu: serial@fffff200 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffff200 0x200>;
				interrupts = <1 4 7>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_dbgu>;
				status = "disabled";
			};

			usart0: serial@fffb0000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffb0000 0x200>;
				interrupts = <6 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart0>;
				status = "disabled";
			};

			usart1: serial@fffb4000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffb4000 0x200>;
				interrupts = <7 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart1>;
				status = "disabled";
			};

			usart2: serial@fffb8000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffb8000 0x200>;
				interrupts = <8 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart2>;
				status = "disabled";
			};

			usart3: serial@fffd0000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffd0000 0x200>;
				interrupts = <23 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart3>;
				status = "disabled";
			};

			uart0: serial@fffd4000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffd4000 0x200>;
				interrupts = <24 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_uart0>;
				status = "disabled";
			};

			uart1: serial@fffd8000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfffd8000 0x200>;
				interrupts = <25 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_uart1>;
				status = "disabled";
			};

			macb0: ethernet@fffc4000 {
				compatible = "cdns,at32ap7000-macb", "cdns,macb";
				reg = <0xfffc4000 0x100>;
				interrupts = <21 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_macb_rmii>;
				status = "disabled";
			};

			usb1: gadget@fffa4000 {
				compatible = "atmel,at91rm9200-udc";
				reg = <0xfffa4000 0x4000>;
				interrupts = <10 4 2>;
				status = "disabled";
			};

			i2c0: i2c@fffac000 {
				compatible = "atmel,at91sam9260-i2c";
				reg = <0xfffac000 0x100>;
				interrupts = <11 4 6>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			mmc0: mmc@fffa8000 {
				compatible = "atmel,hsmci";
				reg = <0xfffa8000 0x600>;
				interrupts = <9 4 0>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			adc0: adc@fffe0000 {
				compatible = "atmel,at91sam9260-adc";
				reg = <0xfffe0000 0x100>;
				interrupts = <5 4 0>;
				atmel,adc-use-external-triggers;
				atmel,adc-channels-used = <0xf>;
				atmel,adc-vref = <3300>;
				atmel,adc-num-channels = <4>;
				atmel,adc-startup-time = <15>;
				atmel,adc-channel-base = <0x30>;
				atmel,adc-drdy-mask = <0x10000>;
				atmel,adc-status-register = <0x1c>;
				atmel,adc-trigger-register = <0x04>;

				trigger@0 {
					trigger-name = "timer-counter-0";
					trigger-value = <0x1>;
				};
				trigger@1 {
					trigger-name = "timer-counter-1";
					trigger-value = <0x3>;
				};

				trigger@2 {
					trigger-name = "timer-counter-2";
					trigger-value = <0x5>;
				};

				trigger@3 {
					trigger-name = "external";
					trigger-value = <0x13>;
					trigger-external;
				};
			};

			watchdog@fffffd40 {
				compatible = "atmel,at91sam9260-wdt";
				reg = <0xfffffd40 0x10>;
				status = "disabled";
			};
		};

		nand0: nand@40000000 {
			compatible = "atmel,at91rm9200-nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x40000000 0x10000000
			       0xffffe800 0x200
			      >;
			atmel,nand-addr-offset = <21>;
			atmel,nand-cmd-offset = <22>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_nand>;
			gpios = <&pioC 13 0
				 &pioC 14 0
				 0
				>;
			status = "disabled";
		};

		usb0: ohci@00500000 {
			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
			reg = <0x00500000 0x100000>;
			interrupts = <20 4 2>;
			status = "disabled";
		};
	};

	i2c@0 {
		compatible = "i2c-gpio";
		gpios = <&pioA 23 0 /* sda */
			 &pioA 24 0 /* scl */
			>;
		i2c-gpio,sda-open-drain;
		i2c-gpio,scl-open-drain;
		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};
Commit	Line	Data
5b6089cb JCPV	1	/*
	2	* at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
	3	*
	4	* Copyright (C) 2011 Atmel,
	5	* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
	6	* 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
	7	*
	8	* Licensed under GPLv2 or later.
	9	*/
	10
	11	/include/ "skeleton.dtsi"
	12
	13	/ {
	14	model = "Atmel AT91SAM9260 family SoC";
	15	compatible = "atmel,at91sam9260";
	16	interrupt-parent = <&aic>;
	17
	18	aliases {
	19	serial0 = &dbgu;
	20	serial1 = &usart0;
	21	serial2 = &usart1;
	22	serial3 = &usart2;
	23	serial4 = &usart3;
9e3129e9 JCPV	24	serial5 = &uart0;
9e3129e9 JCPV	25	serial6 = &uart1;
5b6089cb JCPV	26	gpio0 = &pioA;
	27	gpio1 = &pioB;
	28	gpio2 = &pioC;
	29	tcb0 = &tcb0;
	30	tcb1 = &tcb1;
05dcd361	31	i2c0 = &i2c0;
5b6089cb JCPV	32	};
	33	cpus {
	34	cpu@0 {
	35	compatible = "arm,arm926ejs";
	36	};
	37	};
	38
	39	memory {
	40	reg = <0x20000000 0x04000000>;
	41	};
	42
	43	ahb {
	44	compatible = "simple-bus";
	45	#address-cells = <1>;
	46	#size-cells = <1>;
	47	ranges;
	48
	49	apb {
	50	compatible = "simple-bus";
	51	#address-cells = <1>;
	52	#size-cells = <1>;
	53	ranges;
	54
	55	aic: interrupt-controller@fffff000 {
f8a073ee	56	#interrupt-cells = <3>;
5b6089cb JCPV	57	compatible = "atmel,at91rm9200-aic";
	58	interrupt-controller;
	59	reg = <0xfffff000 0x200>;
c6573943	60	atmel,external-irqs = <29 30 31>;
5b6089cb JCPV	61	};
	62
	63	ramc0: ramc@ffffea00 {
	64	compatible = "atmel,at91sam9260-sdramc";
	65	reg = <0xffffea00 0x200>;
	66	};
	67
	68	pmc: pmc@fffffc00 {
	69	compatible = "atmel,at91rm9200-pmc";
	70	reg = <0xfffffc00 0x100>;
	71	};
	72
	73	rstc@fffffd00 {
	74	compatible = "atmel,at91sam9260-rstc";
	75	reg = <0xfffffd00 0x10>;
	76	};
	77
	78	shdwc@fffffd10 {
	79	compatible = "atmel,at91sam9260-shdwc";
	80	reg = <0xfffffd10 0x10>;
	81	};
	82
	83	pit: timer@fffffd30 {
	84	compatible = "atmel,at91sam9260-pit";
	85	reg = <0xfffffd30 0xf>;
f8a073ee	86	interrupts = <1 4 7>;
5b6089cb JCPV	87	};
	88
	89	tcb0: timer@fffa0000 {
	90	compatible = "atmel,at91rm9200-tcb";
	91	reg = <0xfffa0000 0x100>;
f8a073ee	92	interrupts = <17 4 0 18 4 0 19 4 0>;
5b6089cb JCPV	93	};
	94
	95	tcb1: timer@fffdc000 {
	96	compatible = "atmel,at91rm9200-tcb";
	97	reg = <0xfffdc000 0x100>;
f8a073ee	98	interrupts = <26 4 0 27 4 0 28 4 0>;
5b6089cb JCPV	99	};
5b6089cb JCPV	100
e4541ff2 JCPV	101	pinctrl@fffff400 {
	102	#address-cells = <1>;
	103	#size-cells = <1>;
	104	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
	105	ranges = <0xfffff400 0xfffff400 0x600>;
	106
5314ec8e JCPV	107	atmel,mux-mask = <
	108	/* A B */
	109	0xffffffff 0xffc00c3b /* pioA */
	110	0xffffffff 0x7fff3ccf /* pioB */
	111	0xffffffff 0x007fffff /* pioC */
	112	>;
	113
	114	/* shared pinctrl settings */
ec6754a7 JCPV	115	dbgu {
	116	pinctrl_dbgu: dbgu-0 {
	117	atmel,pins =
	118	<1 14 0x1 0x0 /* PB14 periph A */
	119	1 15 0x1 0x1>; /* PB15 periph with pullup */
	120	};
	121	};
	122
9e3129e9 JCPV	123	usart0 {
9e3129e9 JCPV	124	pinctrl_usart0: usart0-0 {
ec6754a7 JCPV	125	atmel,pins =
	126	<1 4 0x1 0x0 /* PB4 periph A */
	127	1 5 0x1 0x0>; /* PB5 periph A */
	128	};
	129
c58c0c5a	130	pinctrl_usart0_rts: usart0_rts-0 {
ec6754a7	131	atmel,pins =
c58c0c5a JCPV	132	<1 26 0x1 0x0>; /* PB26 periph A */
	133	};
	134
	135	pinctrl_usart0_cts: usart0_cts-0 {
	136	atmel,pins =
	137	<1 27 0x1 0x0>; /* PB27 periph A */
ec6754a7 JCPV	138	};
ec6754a7 JCPV	139
9e3129e9	140	pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
ec6754a7 JCPV	141	atmel,pins =
	142	<1 24 0x1 0x0 /* PB24 periph A */
	143	1 22 0x1 0x0>; /* PB22 periph A */
	144	};
	145
9e3129e9	146	pinctrl_usart0_dcd: usart0_dcd-0 {
ec6754a7 JCPV	147	atmel,pins =
	148	<1 23 0x1 0x0>; /* PB23 periph A */
	149	};
	150
9e3129e9	151	pinctrl_usart0_ri: usart0_ri-0 {
ec6754a7 JCPV	152	atmel,pins =
	153	<1 25 0x1 0x0>; /* PB25 periph A */
	154	};
	155	};
	156
9e3129e9 JCPV	157	usart1 {
9e3129e9 JCPV	158	pinctrl_usart1: usart1-0 {
ec6754a7 JCPV	159	atmel,pins =
	160	<2 6 0x1 0x1 /* PB6 periph A with pullup */
	161	2 7 0x1 0x0>; /* PB7 periph A */
	162	};
	163
c58c0c5a JCPV	164	pinctrl_usart1_rts: usart1_rts-0 {
	165	atmel,pins =
	166	<1 28 0x1 0x0>; /* PB28 periph A */
	167	};
	168
	169	pinctrl_usart1_cts: usart1_cts-0 {
ec6754a7	170	atmel,pins =
c58c0c5a	171	<1 29 0x1 0x0>; /* PB29 periph A */
ec6754a7 JCPV	172	};
	173	};
	174
9e3129e9 JCPV	175	usart2 {
9e3129e9 JCPV	176	pinctrl_usart2: usart2-0 {
ec6754a7 JCPV	177	atmel,pins =
	178	<1 8 0x1 0x1 /* PB8 periph A with pullup */
	179	1 9 0x1 0x0>; /* PB9 periph A */
	180	};
	181
c58c0c5a	182	pinctrl_usart2_rts: usart2_rts-0 {
ec6754a7	183	atmel,pins =
c58c0c5a JCPV	184	<0 4 0x1 0x0>; /* PA4 periph A */
	185	};
	186
	187	pinctrl_usart2_cts: usart2_cts-0 {
	188	atmel,pins =
	189	<0 5 0x1 0x0>; /* PA5 periph A */
ec6754a7 JCPV	190	};
	191	};
	192
9e3129e9 JCPV	193	usart3 {
9e3129e9 JCPV	194	pinctrl_usart3: usart3-0 {
ec6754a7 JCPV	195	atmel,pins =
	196	<2 10 0x1 0x1 /* PB10 periph A with pullup */
	197	2 11 0x1 0x0>; /* PB11 periph A */
	198	};
	199
c58c0c5a JCPV	200	pinctrl_usart3_rts: usart3_rts-0 {
	201	atmel,pins =
	202	<3 8 0x2 0x0>; /* PB8 periph B */
	203	};
	204
	205	pinctrl_usart3_cts: usart3_cts-0 {
ec6754a7	206	atmel,pins =
c58c0c5a	207	<3 10 0x2 0x0>; /* PB10 periph B */
ec6754a7 JCPV	208	};
	209	};
	210
9e3129e9 JCPV	211	uart0 {
9e3129e9 JCPV	212	pinctrl_uart0: uart0-0 {
ec6754a7 JCPV	213	atmel,pins =
	214	<0 31 0x2 0x1 /* PA31 periph B with pullup */
	215	0 30 0x2 0x0>; /* PA30 periph B */
	216	};
	217	};
	218
9e3129e9 JCPV	219	uart1 {
9e3129e9 JCPV	220	pinctrl_uart1: uart1-0 {
ec6754a7 JCPV	221	atmel,pins =
	222	<2 12 0x1 0x1 /* PB12 periph A with pullup */
	223	2 13 0x1 0x0>; /* PB13 periph A */
	224	};
	225	};
5314ec8e	226
7a38d450 JCPV	227	nand {
	228	pinctrl_nand: nand-0 {
	229	atmel,pins =
	230	<2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */
	231	2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
	232	};
	233	};
	234
d9b4fe83 JCPV	235	macb {
	236	pinctrl_macb_rmii: macb_rmii-0 {
	237	atmel,pins =
	238	<0 12 0x1 0x0 /* PA12 periph A */
	239	0 13 0x1 0x0 /* PA13 periph A */
	240	0 14 0x1 0x0 /* PA14 periph A */
	241	0 15 0x1 0x0 /* PA15 periph A */
	242	0 16 0x1 0x0 /* PA16 periph A */
	243	0 17 0x1 0x0 /* PA17 periph A */
	244	0 18 0x1 0x0 /* PA18 periph A */
	245	0 19 0x1 0x0 /* PA19 periph A */
	246	0 20 0x1 0x0 /* PA20 periph A */
	247	0 21 0x1 0x0>; /* PA21 periph A */
	248	};
	249
	250	pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
	251	atmel,pins =
	252	<0 22 0x2 0x0 /* PA22 periph B */
	253	0 23 0x2 0x0 /* PA23 periph B */
	254	0 24 0x2 0x0 /* PA24 periph B */
	255	0 25 0x2 0x0 /* PA25 periph B */
	256	0 26 0x2 0x0 /* PA26 periph B */
	257	0 27 0x2 0x0 /* PA27 periph B */
	258	0 28 0x2 0x0 /* PA28 periph B */
	259	0 29 0x2 0x0>; /* PA29 periph B */
	260	};
	261
	262	pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
	263	atmel,pins =
	264	<0 10 0x2 0x0 /* PA10 periph B */
	265	0 11 0x2 0x0 /* PA11 periph B */
	266	0 24 0x2 0x0 /* PA24 periph B */
	267	0 25 0x2 0x0 /* PA25 periph B */
	268	0 26 0x2 0x0 /* PA26 periph B */
	269	0 27 0x2 0x0 /* PA27 periph B */
	270	0 28 0x2 0x0 /* PA28 periph B */
	271	0 29 0x2 0x0>; /* PA29 periph B */
	272	};
	273	};
	274
d4fe9ac7 JCPV	275	mmc0 {
	276	pinctrl_mmc0_clk: mmc0_clk-0 {
	277	atmel,pins =
	278	<0 8 0x1 0x0>; /* PA8 periph A */
	279	};
	280
	281	pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
	282	atmel,pins =
	283	<0 7 0x1 0x1 /* PA7 periph A with pullup */
	284	0 6 0x1 0x1>; /* PA6 periph A with pullup */
	285	};
	286
	287	pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
	288	atmel,pins =
	289	<0 9 0x1 0x1 /* PA9 periph A with pullup */
	290	0 10 0x1 0x1 /* PA10 periph A with pullup */
	291	0 11 0x1 0x1>; /* PA11 periph A with pullup */
	292	};
	293
	294	pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
	295	atmel,pins =
	296	<0 1 0x2 0x1 /* PA1 periph B with pullup */
	297	0 0 0x2 0x1>; /* PA0 periph B with pullup */
	298	};
	299
	300	pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
	301	atmel,pins =
	302	<0 5 0x2 0x1 /* PA5 periph B with pullup */
	303	0 4 0x2 0x1 /* PA4 periph B with pullup */
	304	0 3 0x2 0x1>; /* PA3 periph B with pullup */
	305	};
	306	};
	307
e4541ff2 JCPV	308	pioA: gpio@fffff400 {
	309	compatible = "atmel,at91rm9200-gpio";
	310	reg = <0xfffff400 0x200>;
	311	interrupts = <2 4 1>;
	312	#gpio-cells = <2>;
	313	gpio-controller;
	314	interrupt-controller;
	315	#interrupt-cells = <2>;
	316	};
	317
	318	pioB: gpio@fffff600 {
	319	compatible = "atmel,at91rm9200-gpio";
	320	reg = <0xfffff600 0x200>;
	321	interrupts = <3 4 1>;
	322	#gpio-cells = <2>;
	323	gpio-controller;
	324	interrupt-controller;
	325	#interrupt-cells = <2>;
	326	};
	327
	328	pioC: gpio@fffff800 {
	329	compatible = "atmel,at91rm9200-gpio";
	330	reg = <0xfffff800 0x200>;
	331	interrupts = <4 4 1>;
	332	#gpio-cells = <2>;
	333	gpio-controller;
	334	interrupt-controller;
	335	#interrupt-cells = <2>;
	336	};
5b6089cb JCPV	337	};
	338
	339	dbgu: serial@fffff200 {
	340	compatible = "atmel,at91sam9260-usart";
	341	reg = <0xfffff200 0x200>;
f8a073ee	342	interrupts = <1 4 7>;
ec6754a7 JCPV	343	pinctrl-names = "default";
ec6754a7 JCPV	344	pinctrl-0 = <&pinctrl_dbgu>;
5b6089cb JCPV	345	status = "disabled";
	346	};
	347
	348	usart0: serial@fffb0000 {
	349	compatible = "atmel,at91sam9260-usart";
	350	reg = <0xfffb0000 0x200>;
f8a073ee	351	interrupts = <6 4 5>;
5b6089cb JCPV	352	atmel,use-dma-rx;
5b6089cb JCPV	353	atmel,use-dma-tx;
ec6754a7	354	pinctrl-names = "default";
9e3129e9	355	pinctrl-0 = <&pinctrl_usart0>;
5b6089cb JCPV	356	status = "disabled";
	357	};
	358
	359	usart1: serial@fffb4000 {
	360	compatible = "atmel,at91sam9260-usart";
	361	reg = <0xfffb4000 0x200>;
f8a073ee	362	interrupts = <7 4 5>;
5b6089cb JCPV	363	atmel,use-dma-rx;
5b6089cb JCPV	364	atmel,use-dma-tx;
ec6754a7	365	pinctrl-names = "default";
9e3129e9	366	pinctrl-0 = <&pinctrl_usart1>;
5b6089cb JCPV	367	status = "disabled";
	368	};
	369
	370	usart2: serial@fffb8000 {
	371	compatible = "atmel,at91sam9260-usart";
	372	reg = <0xfffb8000 0x200>;
f8a073ee	373	interrupts = <8 4 5>;
5b6089cb JCPV	374	atmel,use-dma-rx;
5b6089cb JCPV	375	atmel,use-dma-tx;
ec6754a7	376	pinctrl-names = "default";
9e3129e9	377	pinctrl-0 = <&pinctrl_usart2>;
5b6089cb JCPV	378	status = "disabled";
	379	};
	380
	381	usart3: serial@fffd0000 {
	382	compatible = "atmel,at91sam9260-usart";
	383	reg = <0xfffd0000 0x200>;
f8a073ee	384	interrupts = <23 4 5>;
5b6089cb JCPV	385	atmel,use-dma-rx;
5b6089cb JCPV	386	atmel,use-dma-tx;
ec6754a7	387	pinctrl-names = "default";
9e3129e9	388	pinctrl-0 = <&pinctrl_usart3>;
5b6089cb JCPV	389	status = "disabled";
	390	};
	391
9e3129e9	392	uart0: serial@fffd4000 {
5b6089cb JCPV	393	compatible = "atmel,at91sam9260-usart";
5b6089cb JCPV	394	reg = <0xfffd4000 0x200>;
f8a073ee	395	interrupts = <24 4 5>;
5b6089cb JCPV	396	atmel,use-dma-rx;
5b6089cb JCPV	397	atmel,use-dma-tx;
ec6754a7	398	pinctrl-names = "default";
9e3129e9	399	pinctrl-0 = <&pinctrl_uart0>;
5b6089cb JCPV	400	status = "disabled";
	401	};
	402
9e3129e9	403	uart1: serial@fffd8000 {
5b6089cb JCPV	404	compatible = "atmel,at91sam9260-usart";
5b6089cb JCPV	405	reg = <0xfffd8000 0x200>;
f8a073ee	406	interrupts = <25 4 5>;
5b6089cb JCPV	407	atmel,use-dma-rx;
5b6089cb JCPV	408	atmel,use-dma-tx;
ec6754a7	409	pinctrl-names = "default";
9e3129e9	410	pinctrl-0 = <&pinctrl_uart1>;
5b6089cb JCPV	411	status = "disabled";
	412	};
	413
	414	macb0: ethernet@fffc4000 {
	415	compatible = "cdns,at32ap7000-macb", "cdns,macb";
	416	reg = <0xfffc4000 0x100>;
f8a073ee	417	interrupts = <21 4 3>;
d9b4fe83 JCPV	418	pinctrl-names = "default";
d9b4fe83 JCPV	419	pinctrl-0 = <&pinctrl_macb_rmii>;
5b6089cb JCPV	420	status = "disabled";
	421	};
	422
	423	usb1: gadget@fffa4000 {
	424	compatible = "atmel,at91rm9200-udc";
	425	reg = <0xfffa4000 0x4000>;
f8a073ee	426	interrupts = <10 4 2>;
5b6089cb JCPV	427	status = "disabled";
5b6089cb JCPV	428	};
73d68d91	429
05dcd361 LD	430	i2c0: i2c@fffac000 {
	431	compatible = "atmel,at91sam9260-i2c";
	432	reg = <0xfffac000 0x100>;
	433	interrupts = <11 4 6>;
	434	#address-cells = <1>;
	435	#size-cells = <0>;
	436	status = "disabled";
	437	};
	438
9873137a LD	439	mmc0: mmc@fffa8000 {
	440	compatible = "atmel,hsmci";
	441	reg = <0xfffa8000 0x600>;
	442	interrupts = <9 4 0>;
	443	#address-cells = <1>;
	444	#size-cells = <0>;
	445	status = "disabled";
	446	};
	447
73d68d91 NF	448	adc0: adc@fffe0000 {
	449	compatible = "atmel,at91sam9260-adc";
	450	reg = <0xfffe0000 0x100>;
f8a073ee	451	interrupts = <5 4 0>;
73d68d91 NF	452	atmel,adc-use-external-triggers;
	453	atmel,adc-channels-used = <0xf>;
	454	atmel,adc-vref = <3300>;
	455	atmel,adc-num-channels = <4>;
	456	atmel,adc-startup-time = <15>;
	457	atmel,adc-channel-base = <0x30>;
	458	atmel,adc-drdy-mask = <0x10000>;
	459	atmel,adc-status-register = <0x1c>;
	460	atmel,adc-trigger-register = <0x04>;
	461
	462	trigger@0 {
	463	trigger-name = "timer-counter-0";
	464	trigger-value = <0x1>;
	465	};
	466	trigger@1 {
	467	trigger-name = "timer-counter-1";
	468	trigger-value = <0x3>;
	469	};
	470
	471	trigger@2 {
	472	trigger-name = "timer-counter-2";
	473	trigger-value = <0x5>;
	474	};
	475
	476	trigger@3 {
	477	trigger-name = "external";
	478	trigger-value = <0x13>;
	479	trigger-external;
	480	};
	481	};
7492e7ca FP	482
	483	watchdog@fffffd40 {
	484	compatible = "atmel,at91sam9260-wdt";
	485	reg = <0xfffffd40 0x10>;
	486	status = "disabled";
	487	};
5b6089cb JCPV	488	};
	489
	490	nand0: nand@40000000 {
	491	compatible = "atmel,at91rm9200-nand";
	492	#address-cells = <1>;
	493	#size-cells = <1>;
	494	reg = <0x40000000 0x10000000
	495	0xffffe800 0x200
	496	>;
	497	atmel,nand-addr-offset = <21>;
	498	atmel,nand-cmd-offset = <22>;
7a38d450 JCPV	499	pinctrl-names = "default";
7a38d450 JCPV	500	pinctrl-0 = <&pinctrl_nand>;
5b6089cb JCPV	501	gpios = <&pioC 13 0
	502	&pioC 14 0
	503	0
	504	>;
	505	status = "disabled";
	506	};
	507
	508	usb0: ohci@00500000 {
	509	compatible = "atmel,at91rm9200-ohci", "usb-ohci";
	510	reg = <0x00500000 0x100000>;
f8a073ee	511	interrupts = <20 4 2>;
5b6089cb JCPV	512	status = "disabled";
	513	};
	514	};
	515
	516	i2c@0 {
	517	compatible = "i2c-gpio";
	518	gpios = <&pioA 23 0 /* sda */
	519	&pioA 24 0 /* scl */
	520	>;
	521	i2c-gpio,sda-open-drain;
	522	i2c-gpio,scl-open-drain;
	523	i2c-gpio,delay-us = <2>; /* ~100 kHz */
	524	#address-cells = <1>;
	525	#size-cells = <0>;
	526	status = "disabled";
	527	};
	528	};