Commit | Line | Data |
---|---|---|
4abb3677 JCPV |
1 | /* |
2 | * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC | |
3 | * | |
4 | * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5 | * | |
6 | * Licensed under GPLv2 only. | |
7 | */ | |
8 | ||
9 | /include/ "skeleton.dtsi" | |
10 | ||
11 | / { | |
12 | model = "Atmel AT91SAM9263 family SoC"; | |
13 | compatible = "atmel,at91sam9263"; | |
14 | interrupt-parent = <&aic>; | |
15 | ||
16 | aliases { | |
17 | serial0 = &dbgu; | |
18 | serial1 = &usart0; | |
19 | serial2 = &usart1; | |
20 | serial3 = &usart2; | |
21 | gpio0 = &pioA; | |
22 | gpio1 = &pioB; | |
23 | gpio2 = &pioC; | |
24 | gpio3 = &pioD; | |
25 | gpio4 = &pioE; | |
26 | tcb0 = &tcb0; | |
05dcd361 | 27 | i2c0 = &i2c0; |
099343c6 BS |
28 | ssc0 = &ssc0; |
29 | ssc1 = &ssc1; | |
4abb3677 JCPV |
30 | }; |
31 | cpus { | |
32 | cpu@0 { | |
33 | compatible = "arm,arm926ejs"; | |
34 | }; | |
35 | }; | |
36 | ||
37 | memory { | |
38 | reg = <0x20000000 0x08000000>; | |
39 | }; | |
40 | ||
41 | ahb { | |
42 | compatible = "simple-bus"; | |
43 | #address-cells = <1>; | |
44 | #size-cells = <1>; | |
45 | ranges; | |
46 | ||
47 | apb { | |
48 | compatible = "simple-bus"; | |
49 | #address-cells = <1>; | |
50 | #size-cells = <1>; | |
51 | ranges; | |
52 | ||
53 | aic: interrupt-controller@fffff000 { | |
f8a073ee | 54 | #interrupt-cells = <3>; |
4abb3677 JCPV |
55 | compatible = "atmel,at91rm9200-aic"; |
56 | interrupt-controller; | |
57 | reg = <0xfffff000 0x200>; | |
c6573943 | 58 | atmel,external-irqs = <30 31>; |
4abb3677 JCPV |
59 | }; |
60 | ||
61 | pmc: pmc@fffffc00 { | |
62 | compatible = "atmel,at91rm9200-pmc"; | |
63 | reg = <0xfffffc00 0x100>; | |
64 | }; | |
65 | ||
66 | ramc: ramc@ffffe200 { | |
67 | compatible = "atmel,at91sam9260-sdramc"; | |
68 | reg = <0xffffe200 0x200 | |
69 | 0xffffe800 0x200>; | |
70 | }; | |
71 | ||
72 | pit: timer@fffffd30 { | |
73 | compatible = "atmel,at91sam9260-pit"; | |
74 | reg = <0xfffffd30 0xf>; | |
f8a073ee | 75 | interrupts = <1 4 7>; |
4abb3677 JCPV |
76 | }; |
77 | ||
78 | tcb0: timer@fff7c000 { | |
79 | compatible = "atmel,at91rm9200-tcb"; | |
80 | reg = <0xfff7c000 0x100>; | |
f8a073ee | 81 | interrupts = <19 4 0>; |
4abb3677 JCPV |
82 | }; |
83 | ||
84 | rstc@fffffd00 { | |
85 | compatible = "atmel,at91sam9260-rstc"; | |
86 | reg = <0xfffffd00 0x10>; | |
87 | }; | |
88 | ||
89 | shdwc@fffffd10 { | |
90 | compatible = "atmel,at91sam9260-shdwc"; | |
91 | reg = <0xfffffd10 0x10>; | |
92 | }; | |
93 | ||
e4541ff2 JCPV |
94 | pinctrl@fffff200 { |
95 | #address-cells = <1>; | |
96 | #size-cells = <1>; | |
97 | compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; | |
98 | ranges = <0xfffff200 0xfffff200 0xa00>; | |
99 | ||
5314ec8e JCPV |
100 | atmel,mux-mask = < |
101 | /* A B */ | |
102 | 0xfffffffb 0xffffe07f /* pioA */ | |
103 | 0x0007ffff 0x39072fff /* pioB */ | |
104 | 0xffffffff 0x3ffffff8 /* pioC */ | |
105 | 0xfffffbff 0xffffffff /* pioD */ | |
106 | 0xffe00fff 0xfbfcff00 /* pioE */ | |
107 | >; | |
108 | ||
109 | /* shared pinctrl settings */ | |
ec6754a7 JCPV |
110 | dbgu { |
111 | pinctrl_dbgu: dbgu-0 { | |
112 | atmel,pins = | |
113 | <2 30 0x1 0x0 /* PC30 periph A */ | |
114 | 2 31 0x1 0x1>; /* PC31 periph with pullup */ | |
115 | }; | |
116 | }; | |
117 | ||
9e3129e9 JCPV |
118 | usart0 { |
119 | pinctrl_usart0: usart0-0 { | |
ec6754a7 JCPV |
120 | atmel,pins = |
121 | <0 26 0x1 0x1 /* PA26 periph A with pullup */ | |
122 | 0 27 0x1 0x0>; /* PA27 periph A */ | |
123 | }; | |
124 | ||
c58c0c5a | 125 | pinctrl_usart0_rts: usart0_rts-0 { |
ec6754a7 | 126 | atmel,pins = |
c58c0c5a JCPV |
127 | <0 28 0x1 0x0>; /* PA28 periph A */ |
128 | }; | |
129 | ||
130 | pinctrl_usart0_cts: usart0_cts-0 { | |
131 | atmel,pins = | |
132 | <0 29 0x1 0x0>; /* PA29 periph A */ | |
ec6754a7 JCPV |
133 | }; |
134 | }; | |
135 | ||
9e3129e9 JCPV |
136 | usart1 { |
137 | pinctrl_usart1: usart1-0 { | |
ec6754a7 JCPV |
138 | atmel,pins = |
139 | <3 0 0x1 0x1 /* PD0 periph A with pullup */ | |
140 | 3 1 0x1 0x0>; /* PD1 periph A */ | |
141 | }; | |
142 | ||
c58c0c5a | 143 | pinctrl_usart1_rts: usart1_rts-0 { |
ec6754a7 | 144 | atmel,pins = |
c58c0c5a JCPV |
145 | <3 7 0x2 0x0>; /* PD7 periph B */ |
146 | }; | |
147 | ||
148 | pinctrl_usart1_cts: usart1_cts-0 { | |
149 | atmel,pins = | |
150 | <3 8 0x2 0x0>; /* PD8 periph B */ | |
ec6754a7 JCPV |
151 | }; |
152 | }; | |
153 | ||
9e3129e9 JCPV |
154 | usart2 { |
155 | pinctrl_usart2: usart2-0 { | |
ec6754a7 JCPV |
156 | atmel,pins = |
157 | <3 2 0x1 0x1 /* PD2 periph A with pullup */ | |
158 | 3 3 0x1 0x0>; /* PD3 periph A */ | |
159 | }; | |
160 | ||
c58c0c5a JCPV |
161 | pinctrl_usart2_rts: usart2_rts-0 { |
162 | atmel,pins = | |
163 | <3 5 0x2 0x0>; /* PD5 periph B */ | |
164 | }; | |
165 | ||
166 | pinctrl_usart2_cts: usart2_cts-0 { | |
ec6754a7 | 167 | atmel,pins = |
c58c0c5a | 168 | <4 6 0x2 0x0>; /* PD6 periph B */ |
ec6754a7 JCPV |
169 | }; |
170 | }; | |
5314ec8e | 171 | |
7a38d450 JCPV |
172 | nand { |
173 | pinctrl_nand: nand-0 { | |
174 | atmel,pins = | |
175 | <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ | |
176 | 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ | |
177 | }; | |
178 | }; | |
179 | ||
d9b4fe83 JCPV |
180 | macb { |
181 | pinctrl_macb_rmii: macb_rmii-0 { | |
182 | atmel,pins = | |
183 | <2 25 0x2 0x0 /* PC25 periph B */ | |
184 | 4 21 0x1 0x0 /* PE21 periph A */ | |
185 | 4 23 0x1 0x0 /* PE23 periph A */ | |
186 | 4 24 0x1 0x0 /* PE24 periph A */ | |
187 | 4 25 0x1 0x0 /* PE25 periph A */ | |
188 | 4 26 0x1 0x0 /* PE26 periph A */ | |
189 | 4 27 0x1 0x0 /* PE27 periph A */ | |
190 | 4 28 0x1 0x0 /* PE28 periph A */ | |
191 | 4 29 0x1 0x0 /* PE29 periph A */ | |
192 | 4 30 0x1 0x0>; /* PE30 periph A */ | |
193 | }; | |
194 | ||
195 | pinctrl_macb_rmii_mii: macb_rmii_mii-0 { | |
196 | atmel,pins = | |
197 | <2 20 0x2 0x0 /* PC20 periph B */ | |
198 | 2 21 0x2 0x0 /* PC21 periph B */ | |
199 | 2 22 0x2 0x0 /* PC22 periph B */ | |
200 | 2 23 0x2 0x0 /* PC23 periph B */ | |
201 | 2 24 0x2 0x0 /* PC24 periph B */ | |
202 | 2 25 0x2 0x0 /* PC25 periph B */ | |
203 | 2 27 0x2 0x0 /* PC27 periph B */ | |
204 | 4 22 0x2 0x0>; /* PE22 periph B */ | |
205 | }; | |
206 | }; | |
207 | ||
d4fe9ac7 JCPV |
208 | mmc0 { |
209 | pinctrl_mmc0_clk: mmc0_clk-0 { | |
210 | atmel,pins = | |
211 | <0 12 0x1 0x0>; /* PA12 periph A */ | |
212 | }; | |
213 | ||
214 | pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { | |
215 | atmel,pins = | |
216 | <0 1 0x1 0x1 /* PA1 periph A with pullup */ | |
217 | 0 0 0x1 0x1>; /* PA0 periph A with pullup */ | |
218 | }; | |
219 | ||
220 | pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { | |
221 | atmel,pins = | |
222 | <0 3 0x1 0x1 /* PA3 periph A with pullup */ | |
223 | 0 4 0x1 0x1 /* PA4 periph A with pullup */ | |
224 | 0 5 0x1 0x1>; /* PA5 periph A with pullup */ | |
225 | }; | |
226 | ||
227 | pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { | |
228 | atmel,pins = | |
229 | <0 16 0x1 0x1 /* PA16 periph A with pullup */ | |
230 | 0 17 0x1 0x1>; /* PA17 periph A with pullup */ | |
231 | }; | |
232 | ||
233 | pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { | |
234 | atmel,pins = | |
235 | <0 18 0x1 0x1 /* PA18 periph A with pullup */ | |
236 | 0 19 0x1 0x1 /* PA19 periph A with pullup */ | |
237 | 0 20 0x1 0x1>; /* PA20 periph A with pullup */ | |
238 | }; | |
239 | }; | |
240 | ||
241 | mmc1 { | |
242 | pinctrl_mmc1_clk: mmc1_clk-0 { | |
243 | atmel,pins = | |
244 | <0 6 0x1 0x0>; /* PA6 periph A */ | |
245 | }; | |
246 | ||
247 | pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { | |
248 | atmel,pins = | |
249 | <0 7 0x1 0x1 /* PA7 periph A with pullup */ | |
250 | 0 8 0x1 0x1>; /* PA8 periph A with pullup */ | |
251 | }; | |
252 | ||
253 | pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { | |
254 | atmel,pins = | |
255 | <0 9 0x1 0x1 /* PA9 periph A with pullup */ | |
256 | 0 10 0x1 0x1 /* PA10 periph A with pullup */ | |
257 | 0 11 0x1 0x1>; /* PA11 periph A with pullup */ | |
258 | }; | |
259 | ||
260 | pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { | |
261 | atmel,pins = | |
262 | <0 21 0x1 0x1 /* PA21 periph A with pullup */ | |
263 | 0 22 0x1 0x1>; /* PA22 periph A with pullup */ | |
264 | }; | |
265 | ||
266 | pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { | |
267 | atmel,pins = | |
268 | <0 23 0x1 0x1 /* PA23 periph A with pullup */ | |
269 | 0 24 0x1 0x1 /* PA24 periph A with pullup */ | |
270 | 0 25 0x1 0x1>; /* PA25 periph A with pullup */ | |
271 | }; | |
272 | }; | |
273 | ||
544ae6b2 BS |
274 | ssc0 { |
275 | pinctrl_ssc0_tx: ssc0_tx-0 { | |
276 | atmel,pins = | |
277 | <1 0 0x2 0x0 /* PB0 periph B */ | |
278 | 1 1 0x2 0x0 /* PB1 periph B */ | |
279 | 1 2 0x2 0x0>; /* PB2 periph B */ | |
280 | }; | |
281 | ||
282 | pinctrl_ssc0_rx: ssc0_rx-0 { | |
283 | atmel,pins = | |
284 | <1 3 0x2 0x0 /* PB3 periph B */ | |
285 | 1 4 0x2 0x0 /* PB4 periph B */ | |
286 | 1 5 0x2 0x0>; /* PB5 periph B */ | |
287 | }; | |
288 | }; | |
289 | ||
290 | ssc1 { | |
291 | pinctrl_ssc1_tx: ssc1_tx-0 { | |
292 | atmel,pins = | |
293 | <1 6 0x1 0x0 /* PB6 periph A */ | |
294 | 1 7 0x1 0x0 /* PB7 periph A */ | |
295 | 1 8 0x1 0x0>; /* PB8 periph A */ | |
296 | }; | |
297 | ||
298 | pinctrl_ssc1_rx: ssc1_rx-0 { | |
299 | atmel,pins = | |
300 | <1 9 0x1 0x0 /* PB9 periph A */ | |
301 | 1 10 0x1 0x0 /* PB10 periph A */ | |
302 | 1 11 0x1 0x0>; /* PB11 periph A */ | |
303 | }; | |
304 | }; | |
305 | ||
a68b728f WY |
306 | spi0 { |
307 | pinctrl_spi0: spi0-0 { | |
308 | atmel,pins = | |
309 | <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ | |
310 | 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ | |
311 | 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ | |
312 | }; | |
313 | }; | |
314 | ||
315 | spi1 { | |
316 | pinctrl_spi1: spi1-0 { | |
317 | atmel,pins = | |
318 | <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ | |
319 | 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ | |
320 | 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ | |
321 | }; | |
322 | }; | |
323 | ||
e4541ff2 JCPV |
324 | pioA: gpio@fffff200 { |
325 | compatible = "atmel,at91rm9200-gpio"; | |
326 | reg = <0xfffff200 0x200>; | |
327 | interrupts = <2 4 1>; | |
328 | #gpio-cells = <2>; | |
329 | gpio-controller; | |
330 | interrupt-controller; | |
331 | #interrupt-cells = <2>; | |
332 | }; | |
333 | ||
334 | pioB: gpio@fffff400 { | |
335 | compatible = "atmel,at91rm9200-gpio"; | |
336 | reg = <0xfffff400 0x200>; | |
337 | interrupts = <3 4 1>; | |
338 | #gpio-cells = <2>; | |
339 | gpio-controller; | |
340 | interrupt-controller; | |
341 | #interrupt-cells = <2>; | |
342 | }; | |
343 | ||
344 | pioC: gpio@fffff600 { | |
345 | compatible = "atmel,at91rm9200-gpio"; | |
346 | reg = <0xfffff600 0x200>; | |
347 | interrupts = <4 4 1>; | |
348 | #gpio-cells = <2>; | |
349 | gpio-controller; | |
350 | interrupt-controller; | |
351 | #interrupt-cells = <2>; | |
352 | }; | |
353 | ||
354 | pioD: gpio@fffff800 { | |
355 | compatible = "atmel,at91rm9200-gpio"; | |
356 | reg = <0xfffff800 0x200>; | |
357 | interrupts = <4 4 1>; | |
358 | #gpio-cells = <2>; | |
359 | gpio-controller; | |
360 | interrupt-controller; | |
361 | #interrupt-cells = <2>; | |
362 | }; | |
363 | ||
364 | pioE: gpio@fffffa00 { | |
365 | compatible = "atmel,at91rm9200-gpio"; | |
366 | reg = <0xfffffa00 0x200>; | |
367 | interrupts = <4 4 1>; | |
368 | #gpio-cells = <2>; | |
369 | gpio-controller; | |
370 | interrupt-controller; | |
371 | #interrupt-cells = <2>; | |
5314ec8e | 372 | }; |
4abb3677 JCPV |
373 | }; |
374 | ||
375 | dbgu: serial@ffffee00 { | |
376 | compatible = "atmel,at91sam9260-usart"; | |
377 | reg = <0xffffee00 0x200>; | |
f8a073ee | 378 | interrupts = <1 4 7>; |
ec6754a7 JCPV |
379 | pinctrl-names = "default"; |
380 | pinctrl-0 = <&pinctrl_dbgu>; | |
4abb3677 JCPV |
381 | status = "disabled"; |
382 | }; | |
383 | ||
384 | usart0: serial@fff8c000 { | |
385 | compatible = "atmel,at91sam9260-usart"; | |
386 | reg = <0xfff8c000 0x200>; | |
f8a073ee | 387 | interrupts = <7 4 5>; |
4abb3677 JCPV |
388 | atmel,use-dma-rx; |
389 | atmel,use-dma-tx; | |
ec6754a7 | 390 | pinctrl-names = "default"; |
9e3129e9 | 391 | pinctrl-0 = <&pinctrl_usart0>; |
4abb3677 JCPV |
392 | status = "disabled"; |
393 | }; | |
394 | ||
395 | usart1: serial@fff90000 { | |
396 | compatible = "atmel,at91sam9260-usart"; | |
397 | reg = <0xfff90000 0x200>; | |
f8a073ee | 398 | interrupts = <8 4 5>; |
4abb3677 JCPV |
399 | atmel,use-dma-rx; |
400 | atmel,use-dma-tx; | |
ec6754a7 | 401 | pinctrl-names = "default"; |
9e3129e9 | 402 | pinctrl-0 = <&pinctrl_usart1>; |
4abb3677 JCPV |
403 | status = "disabled"; |
404 | }; | |
405 | ||
406 | usart2: serial@fff94000 { | |
407 | compatible = "atmel,at91sam9260-usart"; | |
408 | reg = <0xfff94000 0x200>; | |
f8a073ee | 409 | interrupts = <9 4 5>; |
4abb3677 JCPV |
410 | atmel,use-dma-rx; |
411 | atmel,use-dma-tx; | |
ec6754a7 | 412 | pinctrl-names = "default"; |
9e3129e9 | 413 | pinctrl-0 = <&pinctrl_usart2>; |
4abb3677 JCPV |
414 | status = "disabled"; |
415 | }; | |
416 | ||
099343c6 BS |
417 | ssc0: ssc@fff98000 { |
418 | compatible = "atmel,at91rm9200-ssc"; | |
419 | reg = <0xfff98000 0x4000>; | |
420 | interrupts = <16 4 5>; | |
544ae6b2 BS |
421 | pinctrl-names = "default"; |
422 | pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; | |
315656bc | 423 | status = "disabled"; |
099343c6 BS |
424 | }; |
425 | ||
426 | ssc1: ssc@fff9c000 { | |
427 | compatible = "atmel,at91rm9200-ssc"; | |
428 | reg = <0xfff9c000 0x4000>; | |
429 | interrupts = <17 4 5>; | |
544ae6b2 BS |
430 | pinctrl-names = "default"; |
431 | pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; | |
315656bc | 432 | status = "disabled"; |
099343c6 BS |
433 | }; |
434 | ||
4abb3677 JCPV |
435 | macb0: ethernet@fffbc000 { |
436 | compatible = "cdns,at32ap7000-macb", "cdns,macb"; | |
437 | reg = <0xfffbc000 0x100>; | |
f8a073ee | 438 | interrupts = <21 4 3>; |
d9b4fe83 JCPV |
439 | pinctrl-names = "default"; |
440 | pinctrl-0 = <&pinctrl_macb_rmii>; | |
4abb3677 JCPV |
441 | status = "disabled"; |
442 | }; | |
443 | ||
444 | usb1: gadget@fff78000 { | |
445 | compatible = "atmel,at91rm9200-udc"; | |
446 | reg = <0xfff78000 0x4000>; | |
f8a073ee | 447 | interrupts = <24 4 2>; |
4abb3677 JCPV |
448 | status = "disabled"; |
449 | }; | |
05dcd361 LD |
450 | |
451 | i2c0: i2c@fff88000 { | |
452 | compatible = "atmel,at91sam9263-i2c"; | |
453 | reg = <0xfff88000 0x100>; | |
454 | interrupts = <13 4 6>; | |
455 | #address-cells = <1>; | |
456 | #size-cells = <0>; | |
457 | status = "disabled"; | |
458 | }; | |
9873137a LD |
459 | |
460 | mmc0: mmc@fff80000 { | |
461 | compatible = "atmel,hsmci"; | |
462 | reg = <0xfff80000 0x600>; | |
463 | interrupts = <10 4 0>; | |
464 | #address-cells = <1>; | |
465 | #size-cells = <0>; | |
466 | status = "disabled"; | |
467 | }; | |
468 | ||
469 | mmc1: mmc@fff84000 { | |
470 | compatible = "atmel,hsmci"; | |
471 | reg = <0xfff84000 0x600>; | |
472 | interrupts = <11 4 0>; | |
473 | #address-cells = <1>; | |
474 | #size-cells = <0>; | |
475 | status = "disabled"; | |
476 | }; | |
db5b0ae0 | 477 | |
7492e7ca FP |
478 | watchdog@fffffd40 { |
479 | compatible = "atmel,at91sam9260-wdt"; | |
480 | reg = <0xfffffd40 0x10>; | |
481 | status = "disabled"; | |
482 | }; | |
d50f88a0 RG |
483 | |
484 | spi0: spi@fffa4000 { | |
485 | #address-cells = <1>; | |
486 | #size-cells = <0>; | |
487 | compatible = "atmel,at91rm9200-spi"; | |
488 | reg = <0xfffa4000 0x200>; | |
489 | interrupts = <14 4 3>; | |
a68b728f WY |
490 | pinctrl-names = "default"; |
491 | pinctrl-0 = <&pinctrl_spi0>; | |
d50f88a0 RG |
492 | status = "disabled"; |
493 | }; | |
494 | ||
495 | spi1: spi@fffa8000 { | |
496 | #address-cells = <1>; | |
497 | #size-cells = <0>; | |
498 | compatible = "atmel,at91rm9200-spi"; | |
499 | reg = <0xfffa8000 0x200>; | |
500 | interrupts = <15 4 3>; | |
a68b728f WY |
501 | pinctrl-names = "default"; |
502 | pinctrl-0 = <&pinctrl_spi1>; | |
d50f88a0 RG |
503 | status = "disabled"; |
504 | }; | |
4abb3677 JCPV |
505 | }; |
506 | ||
507 | nand0: nand@40000000 { | |
508 | compatible = "atmel,at91rm9200-nand"; | |
509 | #address-cells = <1>; | |
510 | #size-cells = <1>; | |
511 | reg = <0x40000000 0x10000000 | |
512 | 0xffffe000 0x200 | |
513 | >; | |
514 | atmel,nand-addr-offset = <21>; | |
515 | atmel,nand-cmd-offset = <22>; | |
7a38d450 JCPV |
516 | pinctrl-names = "default"; |
517 | pinctrl-0 = <&pinctrl_nand>; | |
4abb3677 JCPV |
518 | gpios = <&pioA 22 0 |
519 | &pioD 15 0 | |
520 | 0 | |
521 | >; | |
522 | status = "disabled"; | |
523 | }; | |
524 | ||
525 | usb0: ohci@00a00000 { | |
526 | compatible = "atmel,at91rm9200-ohci", "usb-ohci"; | |
527 | reg = <0x00a00000 0x100000>; | |
f8a073ee | 528 | interrupts = <29 4 2>; |
4abb3677 JCPV |
529 | status = "disabled"; |
530 | }; | |
531 | }; | |
532 | ||
533 | i2c@0 { | |
534 | compatible = "i2c-gpio"; | |
535 | gpios = <&pioB 4 0 /* sda */ | |
536 | &pioB 5 0 /* scl */ | |
537 | >; | |
538 | i2c-gpio,sda-open-drain; | |
539 | i2c-gpio,scl-open-drain; | |
540 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ | |
541 | #address-cells = <1>; | |
542 | #size-cells = <0>; | |
543 | status = "disabled"; | |
544 | }; | |
545 | }; |