Commit | Line | Data |
---|---|---|
5cb4e735 JCPV |
1 | /* |
2 | * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board | |
3 | * | |
4 | * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5 | * | |
6 | * Licensed under GPLv2. | |
7 | */ | |
6db64d29 | 8 | #include "at91sam9g20.dtsi" |
5cb4e735 JCPV |
9 | |
10 | / { | |
11 | ||
12 | chosen { | |
13 | bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; | |
14 | }; | |
15 | ||
16 | memory { | |
17 | reg = <0x20000000 0x4000000>; | |
18 | }; | |
19 | ||
20 | clocks { | |
21 | #address-cells = <1>; | |
22 | #size-cells = <1>; | |
23 | ranges; | |
24 | ||
25 | main_clock: clock@0 { | |
26 | compatible = "atmel,osc", "fixed-clock"; | |
27 | clock-frequency = <18432000>; | |
28 | }; | |
29 | }; | |
30 | ||
31 | ahb { | |
32 | apb { | |
531f67e4 BS |
33 | pinctrl@fffff400 { |
34 | board { | |
35 | pinctrl_pck0_as_mck: pck0_as_mck { | |
36 | atmel,pins = | |
c9d0f317 | 37 | <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ |
531f67e4 BS |
38 | }; |
39 | ||
40 | }; | |
c9d0f317 JCPV |
41 | |
42 | mmc0_slot1 { | |
43 | pinctrl_board_mmc0_slot1: mmc0_slot1-board { | |
44 | atmel,pins = | |
45 | <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ | |
46 | }; | |
47 | }; | |
531f67e4 BS |
48 | }; |
49 | ||
5cb4e735 JCPV |
50 | dbgu: serial@fffff200 { |
51 | status = "okay"; | |
52 | }; | |
53 | ||
54 | usart0: serial@fffb0000 { | |
0cdc7e8e | 55 | pinctrl-0 = |
9e3129e9 | 56 | <&pinctrl_usart0 |
c58c0c5a JCPV |
57 | &pinctrl_usart0_rts |
58 | &pinctrl_usart0_cts | |
9e3129e9 JCPV |
59 | &pinctrl_usart0_dtr_dsr |
60 | &pinctrl_usart0_dcd | |
61 | &pinctrl_usart0_ri>; | |
5cb4e735 JCPV |
62 | status = "okay"; |
63 | }; | |
64 | ||
65 | usart1: serial@fffb4000 { | |
66 | status = "okay"; | |
67 | }; | |
68 | ||
69 | macb0: ethernet@fffc4000 { | |
70 | phy-mode = "rmii"; | |
71 | status = "okay"; | |
72 | }; | |
73 | ||
74 | usb1: gadget@fffa4000 { | |
92f8629b | 75 | atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; |
5cb4e735 JCPV |
76 | status = "okay"; |
77 | }; | |
4134a455 LD |
78 | |
79 | mmc0: mmc@fffa8000 { | |
199e2ede JCPV |
80 | pinctrl-0 = < |
81 | &pinctrl_board_mmc0_slot1 | |
82 | &pinctrl_mmc0_clk | |
83 | &pinctrl_mmc0_slot1_cmd_dat0 | |
84 | &pinctrl_mmc0_slot1_dat1_3>; | |
4134a455 LD |
85 | status = "okay"; |
86 | slot@1 { | |
87 | reg = <1>; | |
88 | bus-width = <4>; | |
92f8629b | 89 | cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; |
4134a455 LD |
90 | }; |
91 | }; | |
199e2ede | 92 | |
531f67e4 BS |
93 | ssc0: ssc@fffbc000 { |
94 | status = "okay"; | |
95 | pinctrl-0 = <&pinctrl_ssc0_tx>; | |
96 | }; | |
b6811e9a RG |
97 | |
98 | spi0: spi@fffc8000 { | |
b6811e9a RG |
99 | cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; |
100 | mtd_dataflash@0 { | |
101 | compatible = "atmel,at45", "atmel,dataflash"; | |
102 | spi-max-frequency = <50000000>; | |
103 | reg = <1>; | |
104 | }; | |
105 | }; | |
c77bcef4 WY |
106 | |
107 | watchdog@fffffd40 { | |
108 | status = "okay"; | |
109 | }; | |
5cb4e735 JCPV |
110 | }; |
111 | ||
112 | nand0: nand@40000000 { | |
113 | nand-bus-width = <8>; | |
114 | nand-ecc-mode = "soft"; | |
115 | nand-on-flash-bbt; | |
116 | status = "okay"; | |
117 | ||
118 | at91bootstrap@0 { | |
119 | label = "at91bootstrap"; | |
120 | reg = <0x0 0x20000>; | |
121 | }; | |
122 | ||
123 | barebox@20000 { | |
124 | label = "barebox"; | |
125 | reg = <0x20000 0x40000>; | |
126 | }; | |
127 | ||
128 | bareboxenv@60000 { | |
129 | label = "bareboxenv"; | |
130 | reg = <0x60000 0x20000>; | |
131 | }; | |
132 | ||
133 | bareboxenv2@80000 { | |
134 | label = "bareboxenv2"; | |
135 | reg = <0x80000 0x20000>; | |
136 | }; | |
137 | ||
138 | oftree@80000 { | |
139 | label = "oftree"; | |
140 | reg = <0xa0000 0x20000>; | |
141 | }; | |
142 | ||
143 | kernel@a0000 { | |
144 | label = "kernel"; | |
145 | reg = <0xc0000 0x400000>; | |
146 | }; | |
147 | ||
148 | rootfs@4a0000 { | |
149 | label = "rootfs"; | |
150 | reg = <0x4c0000 0x7800000>; | |
151 | }; | |
152 | ||
153 | data@7ca0000 { | |
154 | label = "data"; | |
155 | reg = <0x7cc0000 0x8340000>; | |
156 | }; | |
157 | }; | |
158 | ||
159 | usb0: ohci@00500000 { | |
160 | num-ports = <2>; | |
161 | status = "okay"; | |
162 | }; | |
163 | }; | |
164 | ||
165 | i2c@0 { | |
166 | status = "okay"; | |
167 | ||
168 | 24c512@50 { | |
169 | compatible = "24c512"; | |
170 | reg = <0x50>; | |
171 | }; | |
172 | ||
531f67e4 | 173 | wm8731: wm8731@1b { |
5cb4e735 JCPV |
174 | compatible = "wm8731"; |
175 | reg = <0x1b>; | |
176 | }; | |
177 | }; | |
178 | ||
179 | gpio_keys { | |
180 | compatible = "gpio-keys"; | |
5cb4e735 JCPV |
181 | |
182 | btn3 { | |
b6edfbea | 183 | label = "Button 3"; |
92f8629b | 184 | gpios = <&pioA 30 GPIO_ACTIVE_LOW>; |
5cb4e735 JCPV |
185 | linux,code = <0x103>; |
186 | gpio-key,wakeup; | |
187 | }; | |
188 | ||
189 | btn4 { | |
b6edfbea | 190 | label = "Button 4"; |
92f8629b | 191 | gpios = <&pioA 31 GPIO_ACTIVE_LOW>; |
5cb4e735 JCPV |
192 | linux,code = <0x104>; |
193 | gpio-key,wakeup; | |
194 | }; | |
195 | }; | |
531f67e4 BS |
196 | |
197 | sound { | |
198 | compatible = "atmel,at91sam9g20ek-wm8731-audio"; | |
199 | pinctrl-names = "default"; | |
200 | pinctrl-0 = <&pinctrl_pck0_as_mck>; | |
201 | ||
202 | atmel,model = "wm8731 @ AT91SAMG20EK"; | |
203 | ||
204 | atmel,audio-routing = | |
205 | "Ext Spk", "LHPOUT", | |
206 | "Int Mic", "MICIN"; | |
207 | ||
208 | atmel,ssc-controller = <&ssc0>; | |
209 | atmel,audio-codec = <&wm8731>; | |
210 | }; | |
5cb4e735 | 211 | }; |