Commit | Line | Data |
---|---|---|
e0cefb3f YC |
1 | /* |
2 | * Samsung's Exynos3250 based Monk board device tree source | |
3 | * | |
4 | * Copyright (c) 2014 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Monk board which is based on | |
8 | * Samsung Exynos3250 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos3250.dtsi" | |
4a80467a | 17 | #include "exynos4412-ppmu-common.dtsi" |
e0cefb3f | 18 | #include <dt-bindings/input/input.h> |
13b9b64e | 19 | #include <dt-bindings/gpio/gpio.h> |
c5abf619 | 20 | #include <dt-bindings/clock/samsung,s2mps11.h> |
e0cefb3f YC |
21 | |
22 | / { | |
23 | model = "Samsung Monk board"; | |
24 | compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; | |
25 | ||
26 | aliases { | |
27 | i2c7 = &i2c_max77836; | |
28 | }; | |
29 | ||
2458ff00 | 30 | memory@40000000 { |
33c3de7e | 31 | device_type = "memory"; |
e0cefb3f YC |
32 | reg = <0x40000000 0x1ff00000>; |
33 | }; | |
34 | ||
35 | firmware@0205F000 { | |
36 | compatible = "samsung,secure-firmware"; | |
37 | reg = <0x0205F000 0x1000>; | |
38 | }; | |
39 | ||
40 | gpio_keys { | |
41 | compatible = "gpio-keys"; | |
42 | ||
43 | power_key { | |
13b9b64e | 44 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
e0cefb3f YC |
45 | linux,code = <KEY_POWER>; |
46 | label = "power key"; | |
47 | debounce-interval = <10>; | |
36a0282a | 48 | wakeup-source; |
e0cefb3f YC |
49 | }; |
50 | }; | |
51 | ||
52 | vemmc_reg: voltage-regulator-0 { | |
53 | compatible = "regulator-fixed"; | |
54 | regulator-name = "V_EMMC_2.8V-fixed"; | |
55 | regulator-min-microvolt = <2800000>; | |
56 | regulator-max-microvolt = <2800000>; | |
de77e52d | 57 | gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
58 | enable-active-high; |
59 | }; | |
60 | ||
61 | i2c_max77836: i2c-gpio-0 { | |
62 | compatible = "i2c-gpio"; | |
de77e52d | 63 | gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
64 | #address-cells = <1>; |
65 | #size-cells = <0>; | |
66 | ||
67 | max77836: subpmic@25 { | |
68 | compatible = "maxim,max77836"; | |
69 | interrupt-parent = <&gpx1>; | |
70 | interrupts = <5 0>; | |
71 | reg = <0x25>; | |
36a0282a | 72 | wakeup-source; |
e0cefb3f YC |
73 | |
74 | muic: max77836-muic { | |
75 | compatible = "maxim,max77836-muic"; | |
76 | }; | |
77 | ||
78 | regulators { | |
79 | compatible = "maxim,max77836-regulator"; | |
80 | safeout_reg: SAFEOUT { | |
81 | regulator-name = "SAFEOUT"; | |
82 | }; | |
83 | ||
84 | charger_reg: CHARGER { | |
85 | regulator-name = "CHARGER"; | |
86 | regulator-min-microamp = <45000>; | |
87 | regulator-max-microamp = <475000>; | |
88 | regulator-boot-on; | |
89 | }; | |
90 | ||
91 | motor_reg: LDO1 { | |
92 | regulator-name = "MOT_2.7V"; | |
93 | regulator-min-microvolt = <1100000>; | |
94 | regulator-max-microvolt = <2700000>; | |
95 | }; | |
96 | ||
97 | LDO2 { | |
98 | regulator-name = "UNUSED_LDO2"; | |
99 | regulator-min-microvolt = <800000>; | |
100 | regulator-max-microvolt = <3950000>; | |
101 | }; | |
102 | }; | |
103 | ||
104 | charger { | |
105 | compatible = "maxim,max77836-charger"; | |
106 | ||
107 | maxim,constant-uvolt = <4350000>; | |
108 | maxim,fast-charge-uamp = <225000>; | |
109 | maxim,eoc-uamp = <7500>; | |
110 | maxim,ovp-uvolt = <6500000>; | |
111 | }; | |
112 | }; | |
113 | }; | |
9ce09a1f JK |
114 | |
115 | haptics { | |
116 | compatible = "regulator-haptic"; | |
117 | haptic-supply = <&motor_reg>; | |
118 | min-microvolt = <1100000>; | |
119 | max-microvolt = <2700000>; | |
120 | }; | |
5600f8cc CC |
121 | |
122 | thermal-zones { | |
123 | cpu_thermal: cpu-thermal { | |
124 | cooling-maps { | |
125 | map0 { | |
126 | /* Correspond to 500MHz at freq_table */ | |
127 | cooling-device = <&cpu0 5 5>; | |
128 | }; | |
129 | map1 { | |
130 | /* Correspond to 200MHz at freq_table */ | |
131 | cooling-device = <&cpu0 8 8>; | |
132 | }; | |
133 | }; | |
134 | }; | |
135 | }; | |
e0cefb3f YC |
136 | }; |
137 | ||
138 | &adc { | |
139 | vdd-supply = <&ldo3_reg>; | |
140 | status = "okay"; | |
141 | assigned-clocks = <&cmu CLK_SCLK_TSADC>; | |
142 | assigned-clock-rates = <6000000>; | |
143 | ||
144 | thermistor-ap { | |
145 | compatible = "ntc,ncp15wb473"; | |
146 | pullup-uv = <1800000>; | |
147 | pullup-ohm = <100000>; | |
148 | pulldown-ohm = <100000>; | |
149 | io-channels = <&adc 0>; | |
150 | }; | |
151 | ||
152 | thermistor-battery { | |
153 | compatible = "ntc,ncp15wb473"; | |
154 | pullup-uv = <1800000>; | |
155 | pullup-ohm = <100000>; | |
156 | pulldown-ohm = <100000>; | |
157 | io-channels = <&adc 1>; | |
158 | }; | |
159 | }; | |
160 | ||
e9a53680 CC |
161 | &bus_dmc { |
162 | devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; | |
163 | vdd-supply = <&buck1_reg>; | |
164 | status = "okay"; | |
165 | }; | |
166 | ||
48816aff CC |
167 | &cpu0 { |
168 | cpu0-supply = <&buck2_reg>; | |
169 | }; | |
170 | ||
3fc5f3a5 | 171 | &exynos_usbphy { |
4ae9a4c6 | 172 | vbus-supply = <&safeout_reg>; |
3fc5f3a5 JK |
173 | status = "okay"; |
174 | }; | |
175 | ||
176 | &hsotg { | |
177 | vusb_d-supply = <&ldo15_reg>; | |
178 | vusb_a-supply = <&ldo12_reg>; | |
32f144f2 | 179 | dr_mode = "peripheral"; |
3fc5f3a5 JK |
180 | status = "okay"; |
181 | }; | |
182 | ||
e0cefb3f YC |
183 | &i2c_0 { |
184 | #address-cells = <1>; | |
185 | #size-cells = <0>; | |
186 | samsung,i2c-sda-delay = <100>; | |
187 | samsung,i2c-slave-addr = <0x10>; | |
188 | samsung,i2c-max-bus-freq = <100000>; | |
189 | status = "okay"; | |
190 | ||
191 | s2mps14_pmic@66 { | |
192 | compatible = "samsung,s2mps14-pmic"; | |
193 | interrupt-parent = <&gpx0>; | |
194 | interrupts = <7 0>; | |
195 | reg = <0x66>; | |
36a0282a | 196 | wakeup-source; |
e0cefb3f YC |
197 | |
198 | s2mps14_osc: clocks { | |
199 | compatible = "samsung,s2mps14-clk"; | |
200 | #clock-cells = <1>; | |
201 | clock-output-names = "s2mps14_ap", "unused", | |
202 | "s2mps14_bt"; | |
203 | }; | |
204 | ||
205 | regulators { | |
206 | ldo1_reg: LDO1 { | |
207 | regulator-name = "VAP_ALIVE_1.0V"; | |
208 | regulator-min-microvolt = <1000000>; | |
209 | regulator-max-microvolt = <1000000>; | |
210 | regulator-always-on; | |
211 | }; | |
212 | ||
213 | ldo2_reg: LDO2 { | |
214 | regulator-name = "VAP_M1_1.2V"; | |
215 | regulator-min-microvolt = <1200000>; | |
216 | regulator-max-microvolt = <1200000>; | |
217 | regulator-always-on; | |
218 | }; | |
219 | ||
220 | ldo3_reg: LDO3 { | |
221 | regulator-name = "VCC_AP_1.8V"; | |
222 | regulator-min-microvolt = <1800000>; | |
223 | regulator-max-microvolt = <1800000>; | |
224 | regulator-always-on; | |
225 | }; | |
226 | ||
227 | ldo4_reg: LDO4 { | |
228 | regulator-name = "VAP_AVDD_PLL1"; | |
229 | regulator-min-microvolt = <1800000>; | |
230 | regulator-max-microvolt = <1800000>; | |
231 | regulator-always-on; | |
232 | }; | |
233 | ||
234 | ldo5_reg: LDO5 { | |
235 | regulator-name = "VAP_PLL_ISO_1.0V"; | |
236 | regulator-min-microvolt = <1000000>; | |
237 | regulator-max-microvolt = <1000000>; | |
238 | regulator-always-on; | |
239 | }; | |
240 | ||
241 | ldo6_reg: LDO6 { | |
242 | regulator-name = "VAP_MIPI_1.0V"; | |
243 | regulator-min-microvolt = <1000000>; | |
244 | regulator-max-microvolt = <1000000>; | |
245 | }; | |
246 | ||
247 | ldo7_reg: LDO7 { | |
248 | regulator-name = "VAP_AVDD_1.8V"; | |
249 | regulator-min-microvolt = <1800000>; | |
250 | regulator-max-microvolt = <1800000>; | |
251 | regulator-always-on; | |
252 | }; | |
253 | ||
254 | ldo8_reg: LDO8 { | |
255 | regulator-name = "VAP_USB_3.0V"; | |
256 | regulator-min-microvolt = <3000000>; | |
257 | regulator-max-microvolt = <3000000>; | |
258 | regulator-always-on; | |
259 | }; | |
260 | ||
261 | ldo9_reg: LDO9 { | |
262 | regulator-name = "V_LPDDR_1.2V"; | |
263 | regulator-min-microvolt = <1200000>; | |
264 | regulator-max-microvolt = <1200000>; | |
265 | regulator-always-on; | |
266 | }; | |
267 | ||
268 | ldo10_reg: LDO10 { | |
269 | regulator-name = "UNUSED_LDO10"; | |
270 | regulator-min-microvolt = <1000000>; | |
271 | regulator-max-microvolt = <1000000>; | |
272 | }; | |
273 | ||
274 | ldo11_reg: LDO11 { | |
275 | regulator-name = "V_EMMC_1.8V"; | |
276 | regulator-min-microvolt = <1800000>; | |
277 | regulator-max-microvolt = <1800000>; | |
de77e52d | 278 | samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
279 | }; |
280 | ||
281 | ldo12_reg: LDO12 { | |
282 | regulator-name = "V_EMMC_2.8V"; | |
283 | regulator-min-microvolt = <2800000>; | |
284 | regulator-max-microvolt = <2800000>; | |
de77e52d | 285 | samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
e0cefb3f YC |
286 | }; |
287 | ||
288 | ldo13_reg: LDO13 { | |
289 | regulator-name = "VSENSOR_2.85V"; | |
290 | regulator-min-microvolt = <2850000>; | |
291 | regulator-max-microvolt = <2850000>; | |
292 | regulator-always-on; | |
293 | }; | |
294 | ||
295 | ldo14_reg: LDO14 { | |
296 | regulator-name = "UNUSED_LDO14"; | |
297 | regulator-min-microvolt = <1800000>; | |
298 | regulator-max-microvolt = <1800000>; | |
299 | }; | |
300 | ||
301 | ldo15_reg: LDO15 { | |
302 | regulator-name = "TSP_AVDD_3.3V"; | |
303 | regulator-min-microvolt = <3300000>; | |
304 | regulator-max-microvolt = <3300000>; | |
305 | }; | |
306 | ||
307 | ldo16_reg: LDO16 { | |
308 | regulator-name = "LCD_VDD_3.3V"; | |
309 | regulator-min-microvolt = <3300000>; | |
310 | regulator-max-microvolt = <3300000>; | |
311 | }; | |
312 | ||
313 | ldo17_reg: LDO17 { | |
314 | regulator-name = "UNUSED_LDO17"; | |
315 | regulator-min-microvolt = <1800000>; | |
316 | regulator-max-microvolt = <1800000>; | |
317 | }; | |
318 | ||
319 | ldo18_reg: LDO18 { | |
320 | regulator-name = "UNUSED_LDO18"; | |
321 | regulator-min-microvolt = <1800000>; | |
322 | regulator-max-microvolt = <1800000>; | |
323 | }; | |
324 | ||
325 | ldo19_reg: LDO19 { | |
326 | regulator-name = "TSP_VDD_1.8V"; | |
327 | regulator-min-microvolt = <1800000>; | |
328 | regulator-max-microvolt = <1800000>; | |
329 | }; | |
330 | ||
331 | ldo20_reg: LDO20 { | |
332 | regulator-name = "LCD_VDD_1.8V"; | |
333 | regulator-min-microvolt = <1800000>; | |
334 | regulator-max-microvolt = <1800000>; | |
335 | }; | |
336 | ||
337 | ldo21_reg: LDO21 { | |
338 | regulator-name = "UNUSED_LDO21"; | |
339 | regulator-min-microvolt = <1000000>; | |
340 | regulator-max-microvolt = <1000000>; | |
341 | }; | |
342 | ||
343 | ldo22_reg: LDO22 { | |
344 | regulator-name = "UNUSED_LDO22"; | |
345 | regulator-min-microvolt = <1000000>; | |
346 | regulator-max-microvolt = <1000000>; | |
347 | }; | |
348 | ||
349 | ldo23_reg: LDO23 { | |
350 | regulator-name = "UNUSED_LDO23"; | |
351 | regulator-min-microvolt = <1000000>; | |
352 | regulator-max-microvolt = <1000000>; | |
353 | regulator-always-on; | |
354 | }; | |
355 | ||
356 | ldo24_reg: LDO24 { | |
357 | regulator-name = "UNUSED_LDO24"; | |
358 | regulator-min-microvolt = <1800000>; | |
359 | regulator-max-microvolt = <1800000>; | |
360 | }; | |
361 | ||
362 | ldo25_reg: LDO25 { | |
363 | regulator-name = "UNUSED_LDO25"; | |
364 | regulator-min-microvolt = <1800000>; | |
365 | regulator-max-microvolt = <1800000>; | |
366 | }; | |
367 | ||
368 | buck1_reg: BUCK1 { | |
369 | regulator-name = "VAP_MIF_1.0V"; | |
370 | regulator-min-microvolt = <800000>; | |
371 | regulator-max-microvolt = <900000>; | |
372 | regulator-always-on; | |
373 | }; | |
374 | ||
375 | buck2_reg: BUCK2 { | |
376 | regulator-name = "VAP_ARM_1.0V"; | |
377 | regulator-min-microvolt = <850000>; | |
378 | regulator-max-microvolt = <1150000>; | |
379 | regulator-always-on; | |
380 | }; | |
381 | ||
382 | buck3_reg: BUCK3 { | |
383 | regulator-name = "VAP_INT3D_1.0V"; | |
384 | regulator-min-microvolt = <850000>; | |
385 | regulator-max-microvolt = <1000000>; | |
386 | regulator-always-on; | |
387 | }; | |
388 | ||
389 | buck4_reg: BUCK4 { | |
390 | regulator-name = "VCC_SUB_1.95V"; | |
391 | regulator-min-microvolt = <1950000>; | |
392 | regulator-max-microvolt = <1950000>; | |
393 | regulator-always-on; | |
394 | }; | |
395 | ||
396 | buck5_reg: BUCK5 { | |
397 | regulator-name = "VCC_SUB_1.35V"; | |
398 | regulator-min-microvolt = <1350000>; | |
399 | regulator-max-microvolt = <1350000>; | |
400 | regulator-always-on; | |
401 | }; | |
402 | }; | |
403 | }; | |
404 | }; | |
405 | ||
406 | &i2c_1 { | |
407 | #address-cells = <1>; | |
408 | #size-cells = <0>; | |
409 | samsung,i2c-sda-delay = <100>; | |
410 | samsung,i2c-slave-addr = <0x10>; | |
411 | samsung,i2c-max-bus-freq = <400000>; | |
412 | status = "okay"; | |
413 | ||
414 | fuelgauge@36 { | |
415 | compatible = "maxim,max77836-battery"; | |
416 | interrupt-parent = <&gpx1>; | |
417 | interrupts = <2 8>; | |
418 | reg = <0x36>; | |
419 | }; | |
420 | }; | |
421 | ||
422 | &i2s2 { | |
423 | status = "okay"; | |
424 | }; | |
425 | ||
426 | &mshc_0 { | |
427 | #address-cells = <1>; | |
428 | #size-cells = <0>; | |
429 | num-slots = <1>; | |
430 | broken-cd; | |
431 | non-removable; | |
432 | cap-mmc-highspeed; | |
433 | desc-num = <4>; | |
434 | mmc-hs200-1_8v; | |
435 | card-detect-delay = <200>; | |
436 | vmmc-supply = <&vemmc_reg>; | |
437 | clock-frequency = <100000000>; | |
438 | clock-freq-min-max = <400000 100000000>; | |
439 | samsung,dw-mshc-ciu-div = <1>; | |
440 | samsung,dw-mshc-sdr-timing = <0 1>; | |
441 | samsung,dw-mshc-ddr-timing = <1 2>; | |
442 | pinctrl-names = "default"; | |
443 | pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; | |
444 | bus-width = <8>; | |
445 | status = "okay"; | |
446 | }; | |
447 | ||
448 | &serial_0 { | |
449 | assigned-clocks = <&cmu CLK_SCLK_UART0>; | |
450 | assigned-clock-rates = <100000000>; | |
451 | status = "okay"; | |
452 | }; | |
453 | ||
454 | &serial_1 { | |
455 | status = "okay"; | |
456 | }; | |
457 | ||
458 | &tmu { | |
459 | vtmu-supply = <&ldo7_reg>; | |
460 | status = "okay"; | |
461 | }; | |
462 | ||
463 | &rtc { | |
c5abf619 | 464 | clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; |
e0cefb3f YC |
465 | clock-names = "rtc", "rtc_src"; |
466 | status = "okay"; | |
467 | }; | |
468 | ||
469 | &xusbxti { | |
470 | clock-frequency = <24000000>; | |
471 | }; | |
472 | ||
473 | &pinctrl_0 { | |
474 | pinctrl-names = "default"; | |
475 | pinctrl-0 = <&sleep0>; | |
476 | ||
477 | sleep0: sleep-state { | |
478 | PIN_SLP(gpa0-0, INPUT, DOWN); | |
479 | PIN_SLP(gpa0-1, INPUT, DOWN); | |
480 | PIN_SLP(gpa0-2, INPUT, DOWN); | |
481 | PIN_SLP(gpa0-3, INPUT, DOWN); | |
482 | PIN_SLP(gpa0-4, INPUT, DOWN); | |
483 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
484 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
485 | PIN_SLP(gpa0-7, INPUT, DOWN); | |
486 | ||
487 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
488 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
489 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
490 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
491 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
492 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
493 | ||
494 | PIN_SLP(gpb-0, PREV, NONE); | |
495 | PIN_SLP(gpb-1, PREV, NONE); | |
496 | PIN_SLP(gpb-2, PREV, NONE); | |
497 | PIN_SLP(gpb-3, PREV, NONE); | |
498 | PIN_SLP(gpb-4, INPUT, DOWN); | |
499 | PIN_SLP(gpb-5, INPUT, DOWN); | |
500 | PIN_SLP(gpb-6, INPUT, DOWN); | |
501 | PIN_SLP(gpb-7, INPUT, DOWN); | |
502 | ||
503 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
504 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
505 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
506 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
507 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
508 | ||
509 | PIN_SLP(gpc1-0, INPUT, DOWN); | |
510 | PIN_SLP(gpc1-1, INPUT, DOWN); | |
511 | PIN_SLP(gpc1-2, INPUT, DOWN); | |
512 | PIN_SLP(gpc1-3, INPUT, DOWN); | |
513 | PIN_SLP(gpc1-4, INPUT, DOWN); | |
514 | ||
515 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
516 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
517 | PIN_SLP(gpd0-2, INPUT, NONE); | |
518 | PIN_SLP(gpd0-3, INPUT, NONE); | |
519 | ||
520 | PIN_SLP(gpd1-0, INPUT, NONE); | |
521 | PIN_SLP(gpd1-1, INPUT, NONE); | |
522 | PIN_SLP(gpd1-2, INPUT, NONE); | |
523 | PIN_SLP(gpd1-3, INPUT, NONE); | |
524 | }; | |
525 | }; | |
526 | ||
527 | &pinctrl_1 { | |
528 | pinctrl-names = "default"; | |
d278c808 CC |
529 | pinctrl-0 = <&initial1 &sleep1>; |
530 | ||
531 | initial1: initial-state { | |
532 | PIN_IN(gpk2-0, DOWN, LV1); | |
533 | PIN_IN(gpk2-1, DOWN, LV1); | |
534 | PIN_IN(gpk2-2, DOWN, LV1); | |
535 | PIN_IN(gpk2-3, DOWN, LV1); | |
536 | PIN_IN(gpk2-4, DOWN, LV1); | |
537 | PIN_IN(gpk2-5, DOWN, LV1); | |
538 | PIN_IN(gpk2-6, DOWN, LV1); | |
539 | }; | |
e0cefb3f YC |
540 | |
541 | sleep1: sleep-state { | |
542 | PIN_SLP(gpe0-0, PREV, NONE); | |
543 | PIN_SLP(gpe0-1, PREV, NONE); | |
544 | PIN_SLP(gpe0-2, INPUT, DOWN); | |
545 | PIN_SLP(gpe0-3, INPUT, DOWN); | |
546 | PIN_SLP(gpe0-4, PREV, NONE); | |
547 | PIN_SLP(gpe0-5, INPUT, DOWN); | |
548 | PIN_SLP(gpe0-6, INPUT, DOWN); | |
549 | PIN_SLP(gpe0-7, INPUT, DOWN); | |
550 | ||
551 | PIN_SLP(gpe1-0, INPUT, DOWN); | |
552 | PIN_SLP(gpe1-1, PREV, NONE); | |
553 | PIN_SLP(gpe1-2, INPUT, DOWN); | |
554 | PIN_SLP(gpe1-3, INPUT, DOWN); | |
555 | PIN_SLP(gpe1-4, INPUT, DOWN); | |
556 | PIN_SLP(gpe1-5, INPUT, DOWN); | |
557 | PIN_SLP(gpe1-6, INPUT, DOWN); | |
558 | PIN_SLP(gpe1-7, INPUT, NONE); | |
559 | ||
560 | PIN_SLP(gpe2-0, INPUT, NONE); | |
561 | PIN_SLP(gpe2-1, INPUT, NONE); | |
562 | PIN_SLP(gpe2-2, INPUT, NONE); | |
563 | ||
564 | PIN_SLP(gpk0-0, INPUT, DOWN); | |
565 | PIN_SLP(gpk0-1, INPUT, DOWN); | |
566 | PIN_SLP(gpk0-2, OUT0, NONE); | |
567 | PIN_SLP(gpk0-3, INPUT, DOWN); | |
568 | PIN_SLP(gpk0-4, INPUT, DOWN); | |
569 | PIN_SLP(gpk0-5, INPUT, DOWN); | |
570 | PIN_SLP(gpk0-6, INPUT, DOWN); | |
571 | PIN_SLP(gpk0-7, INPUT, DOWN); | |
572 | ||
573 | PIN_SLP(gpk1-0, PREV, NONE); | |
574 | PIN_SLP(gpk1-1, PREV, NONE); | |
575 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
576 | PIN_SLP(gpk1-3, PREV, NONE); | |
577 | PIN_SLP(gpk1-4, PREV, NONE); | |
578 | PIN_SLP(gpk1-5, PREV, NONE); | |
579 | PIN_SLP(gpk1-6, PREV, NONE); | |
580 | ||
581 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
582 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
583 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
584 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
585 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
586 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
587 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
588 | ||
589 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
590 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
591 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
592 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
593 | ||
594 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
595 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
596 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
597 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
598 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
599 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
600 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
601 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
602 | ||
603 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
604 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
605 | PIN_SLP(gpm1-2, INPUT, DOWN); | |
606 | PIN_SLP(gpm1-3, INPUT, DOWN); | |
607 | PIN_SLP(gpm1-4, INPUT, DOWN); | |
608 | PIN_SLP(gpm1-5, INPUT, DOWN); | |
609 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
610 | ||
611 | PIN_SLP(gpm2-0, INPUT, DOWN); | |
612 | PIN_SLP(gpm2-1, INPUT, DOWN); | |
613 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
614 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
615 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
616 | ||
617 | PIN_SLP(gpm3-0, INPUT, DOWN); | |
618 | PIN_SLP(gpm3-1, INPUT, DOWN); | |
619 | PIN_SLP(gpm3-2, INPUT, DOWN); | |
620 | PIN_SLP(gpm3-3, INPUT, DOWN); | |
621 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
622 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
623 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
624 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
625 | ||
626 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
627 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
628 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
629 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
630 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
631 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
632 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
633 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
634 | }; | |
635 | }; |