Commit | Line | Data |
---|---|---|
e0cefb3f YC |
1 | /* |
2 | * Samsung's Exynos3250 based Monk board device tree source | |
3 | * | |
4 | * Copyright (c) 2014 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Monk board which is based on | |
8 | * Samsung Exynos3250 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos3250.dtsi" | |
17 | #include <dt-bindings/input/input.h> | |
13b9b64e | 18 | #include <dt-bindings/gpio/gpio.h> |
c5abf619 | 19 | #include <dt-bindings/clock/samsung,s2mps11.h> |
e0cefb3f YC |
20 | |
21 | / { | |
22 | model = "Samsung Monk board"; | |
23 | compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; | |
24 | ||
25 | aliases { | |
26 | i2c7 = &i2c_max77836; | |
27 | }; | |
28 | ||
29 | memory { | |
30 | reg = <0x40000000 0x1ff00000>; | |
31 | }; | |
32 | ||
33 | firmware@0205F000 { | |
34 | compatible = "samsung,secure-firmware"; | |
35 | reg = <0x0205F000 0x1000>; | |
36 | }; | |
37 | ||
38 | gpio_keys { | |
39 | compatible = "gpio-keys"; | |
40 | ||
41 | power_key { | |
13b9b64e | 42 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
e0cefb3f YC |
43 | linux,code = <KEY_POWER>; |
44 | label = "power key"; | |
45 | debounce-interval = <10>; | |
46 | gpio-key,wakeup; | |
47 | }; | |
48 | }; | |
49 | ||
50 | vemmc_reg: voltage-regulator-0 { | |
51 | compatible = "regulator-fixed"; | |
52 | regulator-name = "V_EMMC_2.8V-fixed"; | |
53 | regulator-min-microvolt = <2800000>; | |
54 | regulator-max-microvolt = <2800000>; | |
55 | gpio = <&gpk0 2 0>; | |
56 | enable-active-high; | |
57 | }; | |
58 | ||
59 | i2c_max77836: i2c-gpio-0 { | |
60 | compatible = "i2c-gpio"; | |
61 | gpios = <&gpd0 2 0>, <&gpd0 3 0>; | |
62 | #address-cells = <1>; | |
63 | #size-cells = <0>; | |
64 | ||
65 | max77836: subpmic@25 { | |
66 | compatible = "maxim,max77836"; | |
67 | interrupt-parent = <&gpx1>; | |
68 | interrupts = <5 0>; | |
69 | reg = <0x25>; | |
70 | wakeup; | |
71 | ||
72 | muic: max77836-muic { | |
73 | compatible = "maxim,max77836-muic"; | |
74 | }; | |
75 | ||
76 | regulators { | |
77 | compatible = "maxim,max77836-regulator"; | |
78 | safeout_reg: SAFEOUT { | |
79 | regulator-name = "SAFEOUT"; | |
80 | }; | |
81 | ||
82 | charger_reg: CHARGER { | |
83 | regulator-name = "CHARGER"; | |
84 | regulator-min-microamp = <45000>; | |
85 | regulator-max-microamp = <475000>; | |
86 | regulator-boot-on; | |
87 | }; | |
88 | ||
89 | motor_reg: LDO1 { | |
90 | regulator-name = "MOT_2.7V"; | |
91 | regulator-min-microvolt = <1100000>; | |
92 | regulator-max-microvolt = <2700000>; | |
93 | }; | |
94 | ||
95 | LDO2 { | |
96 | regulator-name = "UNUSED_LDO2"; | |
97 | regulator-min-microvolt = <800000>; | |
98 | regulator-max-microvolt = <3950000>; | |
99 | }; | |
100 | }; | |
101 | ||
102 | charger { | |
103 | compatible = "maxim,max77836-charger"; | |
104 | ||
105 | maxim,constant-uvolt = <4350000>; | |
106 | maxim,fast-charge-uamp = <225000>; | |
107 | maxim,eoc-uamp = <7500>; | |
108 | maxim,ovp-uvolt = <6500000>; | |
109 | }; | |
110 | }; | |
111 | }; | |
9ce09a1f JK |
112 | |
113 | haptics { | |
114 | compatible = "regulator-haptic"; | |
115 | haptic-supply = <&motor_reg>; | |
116 | min-microvolt = <1100000>; | |
117 | max-microvolt = <2700000>; | |
118 | }; | |
e0cefb3f YC |
119 | }; |
120 | ||
121 | &adc { | |
122 | vdd-supply = <&ldo3_reg>; | |
123 | status = "okay"; | |
124 | assigned-clocks = <&cmu CLK_SCLK_TSADC>; | |
125 | assigned-clock-rates = <6000000>; | |
126 | ||
127 | thermistor-ap { | |
128 | compatible = "ntc,ncp15wb473"; | |
129 | pullup-uv = <1800000>; | |
130 | pullup-ohm = <100000>; | |
131 | pulldown-ohm = <100000>; | |
132 | io-channels = <&adc 0>; | |
133 | }; | |
134 | ||
135 | thermistor-battery { | |
136 | compatible = "ntc,ncp15wb473"; | |
137 | pullup-uv = <1800000>; | |
138 | pullup-ohm = <100000>; | |
139 | pulldown-ohm = <100000>; | |
140 | io-channels = <&adc 1>; | |
141 | }; | |
142 | }; | |
143 | ||
3fc5f3a5 JK |
144 | &exynos_usbphy { |
145 | status = "okay"; | |
146 | }; | |
147 | ||
148 | &hsotg { | |
149 | vusb_d-supply = <&ldo15_reg>; | |
150 | vusb_a-supply = <&ldo12_reg>; | |
32f144f2 | 151 | dr_mode = "peripheral"; |
3fc5f3a5 JK |
152 | status = "okay"; |
153 | }; | |
154 | ||
e0cefb3f YC |
155 | &i2c_0 { |
156 | #address-cells = <1>; | |
157 | #size-cells = <0>; | |
158 | samsung,i2c-sda-delay = <100>; | |
159 | samsung,i2c-slave-addr = <0x10>; | |
160 | samsung,i2c-max-bus-freq = <100000>; | |
161 | status = "okay"; | |
162 | ||
163 | s2mps14_pmic@66 { | |
164 | compatible = "samsung,s2mps14-pmic"; | |
165 | interrupt-parent = <&gpx0>; | |
166 | interrupts = <7 0>; | |
167 | reg = <0x66>; | |
168 | wakeup; | |
169 | ||
170 | s2mps14_osc: clocks { | |
171 | compatible = "samsung,s2mps14-clk"; | |
172 | #clock-cells = <1>; | |
173 | clock-output-names = "s2mps14_ap", "unused", | |
174 | "s2mps14_bt"; | |
175 | }; | |
176 | ||
177 | regulators { | |
178 | ldo1_reg: LDO1 { | |
179 | regulator-name = "VAP_ALIVE_1.0V"; | |
180 | regulator-min-microvolt = <1000000>; | |
181 | regulator-max-microvolt = <1000000>; | |
182 | regulator-always-on; | |
183 | }; | |
184 | ||
185 | ldo2_reg: LDO2 { | |
186 | regulator-name = "VAP_M1_1.2V"; | |
187 | regulator-min-microvolt = <1200000>; | |
188 | regulator-max-microvolt = <1200000>; | |
189 | regulator-always-on; | |
190 | }; | |
191 | ||
192 | ldo3_reg: LDO3 { | |
193 | regulator-name = "VCC_AP_1.8V"; | |
194 | regulator-min-microvolt = <1800000>; | |
195 | regulator-max-microvolt = <1800000>; | |
196 | regulator-always-on; | |
197 | }; | |
198 | ||
199 | ldo4_reg: LDO4 { | |
200 | regulator-name = "VAP_AVDD_PLL1"; | |
201 | regulator-min-microvolt = <1800000>; | |
202 | regulator-max-microvolt = <1800000>; | |
203 | regulator-always-on; | |
204 | }; | |
205 | ||
206 | ldo5_reg: LDO5 { | |
207 | regulator-name = "VAP_PLL_ISO_1.0V"; | |
208 | regulator-min-microvolt = <1000000>; | |
209 | regulator-max-microvolt = <1000000>; | |
210 | regulator-always-on; | |
211 | }; | |
212 | ||
213 | ldo6_reg: LDO6 { | |
214 | regulator-name = "VAP_MIPI_1.0V"; | |
215 | regulator-min-microvolt = <1000000>; | |
216 | regulator-max-microvolt = <1000000>; | |
217 | }; | |
218 | ||
219 | ldo7_reg: LDO7 { | |
220 | regulator-name = "VAP_AVDD_1.8V"; | |
221 | regulator-min-microvolt = <1800000>; | |
222 | regulator-max-microvolt = <1800000>; | |
223 | regulator-always-on; | |
224 | }; | |
225 | ||
226 | ldo8_reg: LDO8 { | |
227 | regulator-name = "VAP_USB_3.0V"; | |
228 | regulator-min-microvolt = <3000000>; | |
229 | regulator-max-microvolt = <3000000>; | |
230 | regulator-always-on; | |
231 | }; | |
232 | ||
233 | ldo9_reg: LDO9 { | |
234 | regulator-name = "V_LPDDR_1.2V"; | |
235 | regulator-min-microvolt = <1200000>; | |
236 | regulator-max-microvolt = <1200000>; | |
237 | regulator-always-on; | |
238 | }; | |
239 | ||
240 | ldo10_reg: LDO10 { | |
241 | regulator-name = "UNUSED_LDO10"; | |
242 | regulator-min-microvolt = <1000000>; | |
243 | regulator-max-microvolt = <1000000>; | |
244 | }; | |
245 | ||
246 | ldo11_reg: LDO11 { | |
247 | regulator-name = "V_EMMC_1.8V"; | |
248 | regulator-min-microvolt = <1800000>; | |
249 | regulator-max-microvolt = <1800000>; | |
250 | samsung,ext-control-gpios = <&gpk0 2 0>; | |
251 | }; | |
252 | ||
253 | ldo12_reg: LDO12 { | |
254 | regulator-name = "V_EMMC_2.8V"; | |
255 | regulator-min-microvolt = <2800000>; | |
256 | regulator-max-microvolt = <2800000>; | |
257 | samsung,ext-control-gpios = <&gpk0 2 0>; | |
258 | }; | |
259 | ||
260 | ldo13_reg: LDO13 { | |
261 | regulator-name = "VSENSOR_2.85V"; | |
262 | regulator-min-microvolt = <2850000>; | |
263 | regulator-max-microvolt = <2850000>; | |
264 | regulator-always-on; | |
265 | }; | |
266 | ||
267 | ldo14_reg: LDO14 { | |
268 | regulator-name = "UNUSED_LDO14"; | |
269 | regulator-min-microvolt = <1800000>; | |
270 | regulator-max-microvolt = <1800000>; | |
271 | }; | |
272 | ||
273 | ldo15_reg: LDO15 { | |
274 | regulator-name = "TSP_AVDD_3.3V"; | |
275 | regulator-min-microvolt = <3300000>; | |
276 | regulator-max-microvolt = <3300000>; | |
277 | }; | |
278 | ||
279 | ldo16_reg: LDO16 { | |
280 | regulator-name = "LCD_VDD_3.3V"; | |
281 | regulator-min-microvolt = <3300000>; | |
282 | regulator-max-microvolt = <3300000>; | |
283 | }; | |
284 | ||
285 | ldo17_reg: LDO17 { | |
286 | regulator-name = "UNUSED_LDO17"; | |
287 | regulator-min-microvolt = <1800000>; | |
288 | regulator-max-microvolt = <1800000>; | |
289 | }; | |
290 | ||
291 | ldo18_reg: LDO18 { | |
292 | regulator-name = "UNUSED_LDO18"; | |
293 | regulator-min-microvolt = <1800000>; | |
294 | regulator-max-microvolt = <1800000>; | |
295 | }; | |
296 | ||
297 | ldo19_reg: LDO19 { | |
298 | regulator-name = "TSP_VDD_1.8V"; | |
299 | regulator-min-microvolt = <1800000>; | |
300 | regulator-max-microvolt = <1800000>; | |
301 | }; | |
302 | ||
303 | ldo20_reg: LDO20 { | |
304 | regulator-name = "LCD_VDD_1.8V"; | |
305 | regulator-min-microvolt = <1800000>; | |
306 | regulator-max-microvolt = <1800000>; | |
307 | }; | |
308 | ||
309 | ldo21_reg: LDO21 { | |
310 | regulator-name = "UNUSED_LDO21"; | |
311 | regulator-min-microvolt = <1000000>; | |
312 | regulator-max-microvolt = <1000000>; | |
313 | }; | |
314 | ||
315 | ldo22_reg: LDO22 { | |
316 | regulator-name = "UNUSED_LDO22"; | |
317 | regulator-min-microvolt = <1000000>; | |
318 | regulator-max-microvolt = <1000000>; | |
319 | }; | |
320 | ||
321 | ldo23_reg: LDO23 { | |
322 | regulator-name = "UNUSED_LDO23"; | |
323 | regulator-min-microvolt = <1000000>; | |
324 | regulator-max-microvolt = <1000000>; | |
325 | regulator-always-on; | |
326 | }; | |
327 | ||
328 | ldo24_reg: LDO24 { | |
329 | regulator-name = "UNUSED_LDO24"; | |
330 | regulator-min-microvolt = <1800000>; | |
331 | regulator-max-microvolt = <1800000>; | |
332 | }; | |
333 | ||
334 | ldo25_reg: LDO25 { | |
335 | regulator-name = "UNUSED_LDO25"; | |
336 | regulator-min-microvolt = <1800000>; | |
337 | regulator-max-microvolt = <1800000>; | |
338 | }; | |
339 | ||
340 | buck1_reg: BUCK1 { | |
341 | regulator-name = "VAP_MIF_1.0V"; | |
342 | regulator-min-microvolt = <800000>; | |
343 | regulator-max-microvolt = <900000>; | |
344 | regulator-always-on; | |
345 | }; | |
346 | ||
347 | buck2_reg: BUCK2 { | |
348 | regulator-name = "VAP_ARM_1.0V"; | |
349 | regulator-min-microvolt = <850000>; | |
350 | regulator-max-microvolt = <1150000>; | |
351 | regulator-always-on; | |
352 | }; | |
353 | ||
354 | buck3_reg: BUCK3 { | |
355 | regulator-name = "VAP_INT3D_1.0V"; | |
356 | regulator-min-microvolt = <850000>; | |
357 | regulator-max-microvolt = <1000000>; | |
358 | regulator-always-on; | |
359 | }; | |
360 | ||
361 | buck4_reg: BUCK4 { | |
362 | regulator-name = "VCC_SUB_1.95V"; | |
363 | regulator-min-microvolt = <1950000>; | |
364 | regulator-max-microvolt = <1950000>; | |
365 | regulator-always-on; | |
366 | }; | |
367 | ||
368 | buck5_reg: BUCK5 { | |
369 | regulator-name = "VCC_SUB_1.35V"; | |
370 | regulator-min-microvolt = <1350000>; | |
371 | regulator-max-microvolt = <1350000>; | |
372 | regulator-always-on; | |
373 | }; | |
374 | }; | |
375 | }; | |
376 | }; | |
377 | ||
378 | &i2c_1 { | |
379 | #address-cells = <1>; | |
380 | #size-cells = <0>; | |
381 | samsung,i2c-sda-delay = <100>; | |
382 | samsung,i2c-slave-addr = <0x10>; | |
383 | samsung,i2c-max-bus-freq = <400000>; | |
384 | status = "okay"; | |
385 | ||
386 | fuelgauge@36 { | |
387 | compatible = "maxim,max77836-battery"; | |
388 | interrupt-parent = <&gpx1>; | |
389 | interrupts = <2 8>; | |
390 | reg = <0x36>; | |
391 | }; | |
392 | }; | |
393 | ||
394 | &i2s2 { | |
395 | status = "okay"; | |
396 | }; | |
397 | ||
398 | &mshc_0 { | |
399 | #address-cells = <1>; | |
400 | #size-cells = <0>; | |
401 | num-slots = <1>; | |
402 | broken-cd; | |
403 | non-removable; | |
404 | cap-mmc-highspeed; | |
405 | desc-num = <4>; | |
406 | mmc-hs200-1_8v; | |
407 | card-detect-delay = <200>; | |
408 | vmmc-supply = <&vemmc_reg>; | |
409 | clock-frequency = <100000000>; | |
410 | clock-freq-min-max = <400000 100000000>; | |
411 | samsung,dw-mshc-ciu-div = <1>; | |
412 | samsung,dw-mshc-sdr-timing = <0 1>; | |
413 | samsung,dw-mshc-ddr-timing = <1 2>; | |
414 | pinctrl-names = "default"; | |
415 | pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; | |
416 | bus-width = <8>; | |
417 | status = "okay"; | |
418 | }; | |
419 | ||
420 | &serial_0 { | |
421 | assigned-clocks = <&cmu CLK_SCLK_UART0>; | |
422 | assigned-clock-rates = <100000000>; | |
423 | status = "okay"; | |
424 | }; | |
425 | ||
426 | &serial_1 { | |
427 | status = "okay"; | |
428 | }; | |
429 | ||
430 | &tmu { | |
431 | vtmu-supply = <&ldo7_reg>; | |
432 | status = "okay"; | |
433 | }; | |
434 | ||
435 | &rtc { | |
c5abf619 | 436 | clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; |
e0cefb3f YC |
437 | clock-names = "rtc", "rtc_src"; |
438 | status = "okay"; | |
439 | }; | |
440 | ||
8d6b9b46 CC |
441 | &ppmu_dmc0 { |
442 | status = "okay"; | |
443 | ||
444 | events { | |
445 | ppmu_dmc0_3: ppmu-event3-dmc0 { | |
446 | event-name = "ppmu-event3-dmc0"; | |
447 | }; | |
448 | }; | |
449 | }; | |
450 | ||
451 | &ppmu_dmc1 { | |
452 | status = "okay"; | |
453 | ||
454 | events { | |
455 | ppmu_dmc1_3: ppmu-event3-dmc1 { | |
456 | event-name = "ppmu-event3-dmc1"; | |
457 | }; | |
458 | }; | |
459 | }; | |
460 | ||
461 | &ppmu_leftbus { | |
462 | status = "okay"; | |
463 | ||
464 | events { | |
465 | ppmu_leftbus_3: ppmu-event3-leftbus { | |
466 | event-name = "ppmu-event3-leftbus"; | |
467 | }; | |
468 | }; | |
469 | }; | |
470 | ||
471 | &ppmu_rightbus { | |
472 | status = "okay"; | |
473 | ||
474 | events { | |
475 | ppmu_rightbus_3: ppmu-event3-rightbus { | |
476 | event-name = "ppmu-event3-rightbus"; | |
477 | }; | |
478 | }; | |
479 | }; | |
480 | ||
e0cefb3f YC |
481 | &xusbxti { |
482 | clock-frequency = <24000000>; | |
483 | }; | |
484 | ||
485 | &pinctrl_0 { | |
486 | pinctrl-names = "default"; | |
487 | pinctrl-0 = <&sleep0>; | |
488 | ||
489 | sleep0: sleep-state { | |
490 | PIN_SLP(gpa0-0, INPUT, DOWN); | |
491 | PIN_SLP(gpa0-1, INPUT, DOWN); | |
492 | PIN_SLP(gpa0-2, INPUT, DOWN); | |
493 | PIN_SLP(gpa0-3, INPUT, DOWN); | |
494 | PIN_SLP(gpa0-4, INPUT, DOWN); | |
495 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
496 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
497 | PIN_SLP(gpa0-7, INPUT, DOWN); | |
498 | ||
499 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
500 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
501 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
502 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
503 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
504 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
505 | ||
506 | PIN_SLP(gpb-0, PREV, NONE); | |
507 | PIN_SLP(gpb-1, PREV, NONE); | |
508 | PIN_SLP(gpb-2, PREV, NONE); | |
509 | PIN_SLP(gpb-3, PREV, NONE); | |
510 | PIN_SLP(gpb-4, INPUT, DOWN); | |
511 | PIN_SLP(gpb-5, INPUT, DOWN); | |
512 | PIN_SLP(gpb-6, INPUT, DOWN); | |
513 | PIN_SLP(gpb-7, INPUT, DOWN); | |
514 | ||
515 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
516 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
517 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
518 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
519 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
520 | ||
521 | PIN_SLP(gpc1-0, INPUT, DOWN); | |
522 | PIN_SLP(gpc1-1, INPUT, DOWN); | |
523 | PIN_SLP(gpc1-2, INPUT, DOWN); | |
524 | PIN_SLP(gpc1-3, INPUT, DOWN); | |
525 | PIN_SLP(gpc1-4, INPUT, DOWN); | |
526 | ||
527 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
528 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
529 | PIN_SLP(gpd0-2, INPUT, NONE); | |
530 | PIN_SLP(gpd0-3, INPUT, NONE); | |
531 | ||
532 | PIN_SLP(gpd1-0, INPUT, NONE); | |
533 | PIN_SLP(gpd1-1, INPUT, NONE); | |
534 | PIN_SLP(gpd1-2, INPUT, NONE); | |
535 | PIN_SLP(gpd1-3, INPUT, NONE); | |
536 | }; | |
537 | }; | |
538 | ||
539 | &pinctrl_1 { | |
540 | pinctrl-names = "default"; | |
541 | pinctrl-0 = <&sleep1>; | |
542 | ||
543 | sleep1: sleep-state { | |
544 | PIN_SLP(gpe0-0, PREV, NONE); | |
545 | PIN_SLP(gpe0-1, PREV, NONE); | |
546 | PIN_SLP(gpe0-2, INPUT, DOWN); | |
547 | PIN_SLP(gpe0-3, INPUT, DOWN); | |
548 | PIN_SLP(gpe0-4, PREV, NONE); | |
549 | PIN_SLP(gpe0-5, INPUT, DOWN); | |
550 | PIN_SLP(gpe0-6, INPUT, DOWN); | |
551 | PIN_SLP(gpe0-7, INPUT, DOWN); | |
552 | ||
553 | PIN_SLP(gpe1-0, INPUT, DOWN); | |
554 | PIN_SLP(gpe1-1, PREV, NONE); | |
555 | PIN_SLP(gpe1-2, INPUT, DOWN); | |
556 | PIN_SLP(gpe1-3, INPUT, DOWN); | |
557 | PIN_SLP(gpe1-4, INPUT, DOWN); | |
558 | PIN_SLP(gpe1-5, INPUT, DOWN); | |
559 | PIN_SLP(gpe1-6, INPUT, DOWN); | |
560 | PIN_SLP(gpe1-7, INPUT, NONE); | |
561 | ||
562 | PIN_SLP(gpe2-0, INPUT, NONE); | |
563 | PIN_SLP(gpe2-1, INPUT, NONE); | |
564 | PIN_SLP(gpe2-2, INPUT, NONE); | |
565 | ||
566 | PIN_SLP(gpk0-0, INPUT, DOWN); | |
567 | PIN_SLP(gpk0-1, INPUT, DOWN); | |
568 | PIN_SLP(gpk0-2, OUT0, NONE); | |
569 | PIN_SLP(gpk0-3, INPUT, DOWN); | |
570 | PIN_SLP(gpk0-4, INPUT, DOWN); | |
571 | PIN_SLP(gpk0-5, INPUT, DOWN); | |
572 | PIN_SLP(gpk0-6, INPUT, DOWN); | |
573 | PIN_SLP(gpk0-7, INPUT, DOWN); | |
574 | ||
575 | PIN_SLP(gpk1-0, PREV, NONE); | |
576 | PIN_SLP(gpk1-1, PREV, NONE); | |
577 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
578 | PIN_SLP(gpk1-3, PREV, NONE); | |
579 | PIN_SLP(gpk1-4, PREV, NONE); | |
580 | PIN_SLP(gpk1-5, PREV, NONE); | |
581 | PIN_SLP(gpk1-6, PREV, NONE); | |
582 | ||
583 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
584 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
585 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
586 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
587 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
588 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
589 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
590 | ||
591 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
592 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
593 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
594 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
595 | ||
596 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
597 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
598 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
599 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
600 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
601 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
602 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
603 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
604 | ||
605 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
606 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
607 | PIN_SLP(gpm1-2, INPUT, DOWN); | |
608 | PIN_SLP(gpm1-3, INPUT, DOWN); | |
609 | PIN_SLP(gpm1-4, INPUT, DOWN); | |
610 | PIN_SLP(gpm1-5, INPUT, DOWN); | |
611 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
612 | ||
613 | PIN_SLP(gpm2-0, INPUT, DOWN); | |
614 | PIN_SLP(gpm2-1, INPUT, DOWN); | |
615 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
616 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
617 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
618 | ||
619 | PIN_SLP(gpm3-0, INPUT, DOWN); | |
620 | PIN_SLP(gpm3-1, INPUT, DOWN); | |
621 | PIN_SLP(gpm3-2, INPUT, DOWN); | |
622 | PIN_SLP(gpm3-3, INPUT, DOWN); | |
623 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
624 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
625 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
626 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
627 | ||
628 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
629 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
630 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
631 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
632 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
633 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
634 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
635 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
636 | }; | |
637 | }; |