Commit | Line | Data |
---|---|---|
d105f0b1 TF |
1 | /* |
2 | * Samsung's Exynos4210 based Trats board device tree source | |
3 | * | |
4 | * Copyright (c) 2012 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Trats board which is based on | |
8 | * Samsung's Exynos4210 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
3799279f | 16 | #include "exynos4210.dtsi" |
39c1c413 | 17 | #include <dt-bindings/gpio/gpio.h> |
d105f0b1 TF |
18 | |
19 | / { | |
20 | model = "Samsung Trats based on Exynos4210"; | |
8bdb31b4 | 21 | compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; |
d105f0b1 TF |
22 | |
23 | memory { | |
59cf19a4 TF |
24 | reg = <0x40000000 0x10000000 |
25 | 0x50000000 0x10000000 | |
26 | 0x60000000 0x10000000 | |
27 | 0x70000000 0x10000000>; | |
d105f0b1 TF |
28 | }; |
29 | ||
30 | chosen { | |
31 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; | |
62d38099 | 32 | stdout-path = &serial_2; |
d105f0b1 TF |
33 | }; |
34 | ||
b75e2e3d AH |
35 | regulators { |
36 | compatible = "simple-bus"; | |
37 | ||
38 | vemmc_reg: regulator-0 { | |
39 | compatible = "regulator-fixed"; | |
40 | regulator-name = "VMEM_VDD_2.8V"; | |
41 | regulator-min-microvolt = <2800000>; | |
42 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 43 | gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
44 | enable-active-high; |
45 | }; | |
46 | ||
47 | tsp_reg: regulator-1 { | |
48 | compatible = "regulator-fixed"; | |
49 | regulator-name = "TSP_FIXED_VOLTAGES"; | |
50 | regulator-min-microvolt = <2800000>; | |
51 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 52 | gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
53 | enable-active-high; |
54 | }; | |
55 | ||
56 | cam_af_28v_reg: regulator-2 { | |
57 | compatible = "regulator-fixed"; | |
58 | regulator-name = "8M_AF_2.8V_EN"; | |
59 | regulator-min-microvolt = <2800000>; | |
60 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 61 | gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
62 | enable-active-high; |
63 | }; | |
64 | ||
65 | cam_io_en_reg: regulator-3 { | |
66 | compatible = "regulator-fixed"; | |
67 | regulator-name = "CAM_IO_EN"; | |
68 | regulator-min-microvolt = <2800000>; | |
69 | regulator-max-microvolt = <2800000>; | |
39c1c413 | 70 | gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
71 | enable-active-high; |
72 | }; | |
73 | ||
74 | cam_io_12v_reg: regulator-4 { | |
75 | compatible = "regulator-fixed"; | |
76 | regulator-name = "8M_1.2V_EN"; | |
77 | regulator-min-microvolt = <1200000>; | |
78 | regulator-max-microvolt = <1200000>; | |
39c1c413 | 79 | gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
80 | enable-active-high; |
81 | }; | |
82 | ||
83 | vt_core_15v_reg: regulator-5 { | |
84 | compatible = "regulator-fixed"; | |
85 | regulator-name = "VT_CORE_1.5V"; | |
86 | regulator-min-microvolt = <1500000>; | |
87 | regulator-max-microvolt = <1500000>; | |
39c1c413 | 88 | gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; |
b75e2e3d AH |
89 | enable-active-high; |
90 | }; | |
d105f0b1 TF |
91 | }; |
92 | ||
9eb61020 TF |
93 | gpio-keys { |
94 | compatible = "gpio-keys"; | |
95 | ||
96 | vol-down-key { | |
39c1c413 | 97 | gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
9eb61020 TF |
98 | linux,code = <114>; |
99 | label = "volume down"; | |
100 | debounce-interval = <10>; | |
101 | }; | |
102 | ||
103 | vol-up-key { | |
39c1c413 | 104 | gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
9eb61020 TF |
105 | linux,code = <115>; |
106 | label = "volume up"; | |
107 | debounce-interval = <10>; | |
108 | }; | |
109 | ||
110 | power-key { | |
39c1c413 | 111 | gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
9eb61020 TF |
112 | linux,code = <116>; |
113 | label = "power"; | |
114 | debounce-interval = <10>; | |
36a0282a | 115 | wakeup-source; |
9eb61020 TF |
116 | }; |
117 | ||
118 | ok-key { | |
39c1c413 | 119 | gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
9eb61020 TF |
120 | linux,code = <352>; |
121 | label = "ok"; | |
122 | debounce-interval = <10>; | |
123 | }; | |
124 | }; | |
125 | ||
8b6076d4 TA |
126 | fixed-rate-clocks { |
127 | xxti { | |
128 | compatible = "samsung,clock-xxti"; | |
129 | clock-frequency = <0>; | |
130 | }; | |
131 | ||
132 | xusbxti { | |
133 | compatible = "samsung,clock-xusbxti"; | |
134 | clock-frequency = <24000000>; | |
135 | }; | |
136 | }; | |
39a11311 | 137 | |
bf4a0bed LM |
138 | thermal-zones { |
139 | cpu_thermal: cpu-thermal { | |
140 | cooling-maps { | |
141 | map0 { | |
142 | /* Corresponds to 800MHz at freq_table */ | |
143 | cooling-device = <&cpu0 2 2>; | |
144 | }; | |
145 | map1 { | |
146 | /* Corresponds to 200MHz at freq_table */ | |
147 | cooling-device = <&cpu0 4 4>; | |
148 | }; | |
149 | }; | |
150 | }; | |
151 | }; | |
152 | ||
39a11311 SN |
153 | camera { |
154 | pinctrl-names = "default"; | |
155 | pinctrl-0 = <>; | |
156 | status = "okay"; | |
157 | ||
158 | fimc_0: fimc@11800000 { | |
159 | status = "okay"; | |
0357a443 SN |
160 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
161 | <&clock CLK_SCLK_FIMC0>; | |
162 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
163 | assigned-clock-rates = <0>, <160000000>; | |
39a11311 SN |
164 | }; |
165 | ||
166 | fimc_1: fimc@11810000 { | |
167 | status = "okay"; | |
0357a443 SN |
168 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
169 | <&clock CLK_SCLK_FIMC1>; | |
170 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
171 | assigned-clock-rates = <0>, <160000000>; | |
39a11311 SN |
172 | }; |
173 | ||
174 | fimc_2: fimc@11820000 { | |
175 | status = "okay"; | |
0357a443 SN |
176 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
177 | <&clock CLK_SCLK_FIMC2>; | |
178 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
179 | assigned-clock-rates = <0>, <160000000>; | |
39a11311 SN |
180 | }; |
181 | ||
182 | fimc_3: fimc@11830000 { | |
183 | status = "okay"; | |
0357a443 SN |
184 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
185 | <&clock CLK_SCLK_FIMC3>; | |
186 | assigned-clock-parents = <&clock CLK_SCLK_MPLL>; | |
187 | assigned-clock-rates = <0>, <160000000>; | |
39a11311 SN |
188 | }; |
189 | }; | |
d105f0b1 | 190 | }; |
9b70afd9 | 191 | |
300bde79 TA |
192 | &cpu0 { |
193 | cpu0-supply = <&varm_breg>; | |
194 | }; | |
195 | ||
9b70afd9 KK |
196 | &dsi_0 { |
197 | vddcore-supply = <&vusb_reg>; | |
198 | vddio-supply = <&vmipi_reg>; | |
199 | samsung,pll-clock-frequency = <24000000>; | |
200 | status = "okay"; | |
201 | ||
202 | ports { | |
203 | #address-cells = <1>; | |
204 | #size-cells = <0>; | |
205 | ||
206 | port@1 { | |
207 | reg = <1>; | |
208 | ||
209 | dsi_out: endpoint { | |
210 | remote-endpoint = <&dsi_in>; | |
211 | samsung,burst-clock-frequency = <500000000>; | |
212 | samsung,esc-clock-frequency = <20000000>; | |
213 | }; | |
214 | }; | |
215 | }; | |
216 | ||
217 | panel@0 { | |
218 | reg = <0>; | |
219 | compatible = "samsung,s6e8aa0"; | |
220 | vdd3-supply = <&vcclcd_reg>; | |
221 | vci-supply = <&vlcd_reg>; | |
39c1c413 | 222 | reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
9b70afd9 KK |
223 | power-on-delay= <50>; |
224 | reset-delay = <100>; | |
225 | init-delay = <100>; | |
226 | flip-horizontal; | |
227 | flip-vertical; | |
228 | panel-width-mm = <58>; | |
229 | panel-height-mm = <103>; | |
230 | ||
231 | display-timings { | |
232 | timing-0 { | |
233 | clock-frequency = <57153600>; | |
234 | hactive = <720>; | |
235 | vactive = <1280>; | |
236 | hfront-porch = <5>; | |
237 | hback-porch = <5>; | |
238 | hsync-len = <5>; | |
239 | vfront-porch = <13>; | |
240 | vback-porch = <1>; | |
241 | vsync-len = <2>; | |
242 | }; | |
243 | }; | |
244 | ||
245 | port { | |
246 | dsi_in: endpoint { | |
247 | remote-endpoint = <&dsi_out>; | |
248 | }; | |
249 | }; | |
250 | }; | |
251 | }; | |
252 | ||
253 | &exynos_usbphy { | |
254 | status = "okay"; | |
4ae9a4c6 | 255 | vbus-supply = <&safe1_sreg>; |
9b70afd9 KK |
256 | }; |
257 | ||
258 | &fimd { | |
259 | status = "okay"; | |
260 | }; | |
261 | ||
262 | &hsotg { | |
263 | vusb_d-supply = <&vusb_reg>; | |
264 | vusb_a-supply = <&vusbdac_reg>; | |
265 | dr_mode = "peripheral"; | |
266 | status = "okay"; | |
267 | }; | |
268 | ||
269 | &i2c_3 { | |
270 | samsung,i2c-sda-delay = <100>; | |
271 | samsung,i2c-slave-addr = <0x10>; | |
272 | samsung,i2c-max-bus-freq = <400000>; | |
273 | pinctrl-0 = <&i2c3_bus>; | |
274 | pinctrl-names = "default"; | |
275 | status = "okay"; | |
276 | ||
277 | mms114-touchscreen@48 { | |
278 | compatible = "melfas,mms114"; | |
279 | reg = <0x48>; | |
280 | interrupt-parent = <&gpx0>; | |
281 | interrupts = <4 2>; | |
282 | x-size = <720>; | |
283 | y-size = <1280>; | |
284 | avdd-supply = <&tsp_reg>; | |
285 | vdd-supply = <&tsp_reg>; | |
286 | }; | |
287 | }; | |
288 | ||
289 | &i2c_5 { | |
290 | samsung,i2c-sda-delay = <100>; | |
291 | samsung,i2c-slave-addr = <0x10>; | |
292 | samsung,i2c-max-bus-freq = <100000>; | |
293 | pinctrl-0 = <&i2c5_bus>; | |
294 | pinctrl-names = "default"; | |
295 | status = "okay"; | |
296 | ||
297 | max8997_pmic@66 { | |
298 | compatible = "maxim,max8997-pmic"; | |
299 | ||
300 | reg = <0x66>; | |
330d1276 MS |
301 | interrupt-parent = <&gpx0>; |
302 | interrupts = <7 0>; | |
9b70afd9 KK |
303 | |
304 | max8997,pmic-buck1-uses-gpio-dvs; | |
305 | max8997,pmic-buck2-uses-gpio-dvs; | |
306 | max8997,pmic-buck5-uses-gpio-dvs; | |
307 | ||
308 | max8997,pmic-ignore-gpiodvs-side-effect; | |
309 | max8997,pmic-buck125-default-dvs-idx = <0>; | |
310 | ||
39c1c413 JMC |
311 | max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, |
312 | <&gpx0 6 GPIO_ACTIVE_HIGH>, | |
313 | <&gpl0 0 GPIO_ACTIVE_HIGH>; | |
9b70afd9 KK |
314 | |
315 | max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, | |
316 | <1250000>, <1200000>, | |
317 | <1150000>, <1100000>, | |
318 | <1000000>, <950000>; | |
319 | ||
320 | max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, | |
321 | <950000>, <900000>, | |
322 | <1100000>, <1000000>, | |
323 | <950000>, <900000>; | |
324 | ||
325 | max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, | |
326 | <1200000>, <1200000>, | |
327 | <1200000>, <1200000>, | |
328 | <1200000>, <1200000>; | |
329 | ||
330 | regulators { | |
331 | valive_reg: LDO2 { | |
332 | regulator-name = "VALIVE_1.1V_C210"; | |
333 | regulator-min-microvolt = <1100000>; | |
334 | regulator-max-microvolt = <1100000>; | |
335 | regulator-always-on; | |
336 | }; | |
337 | ||
338 | vusb_reg: LDO3 { | |
339 | regulator-name = "VUSB_1.1V_C210"; | |
340 | regulator-min-microvolt = <1100000>; | |
341 | regulator-max-microvolt = <1100000>; | |
342 | }; | |
343 | ||
344 | vmipi_reg: LDO4 { | |
345 | regulator-name = "VMIPI_1.8V"; | |
346 | regulator-min-microvolt = <1800000>; | |
347 | regulator-max-microvolt = <1800000>; | |
348 | }; | |
349 | ||
350 | vpda_reg: LDO6 { | |
351 | regulator-name = "VCC_1.8V_PDA"; | |
352 | regulator-min-microvolt = <1800000>; | |
353 | regulator-max-microvolt = <1800000>; | |
354 | regulator-always-on; | |
355 | }; | |
356 | ||
357 | vcam_reg: LDO7 { | |
358 | regulator-name = "CAM_ISP_1.8V"; | |
359 | regulator-min-microvolt = <1800000>; | |
360 | regulator-max-microvolt = <1800000>; | |
361 | }; | |
362 | ||
363 | vusbdac_reg: LDO8 { | |
44ad5e1f | 364 | regulator-name = "VUSB+VDAC_3.3V_C210"; |
9b70afd9 KK |
365 | regulator-min-microvolt = <3300000>; |
366 | regulator-max-microvolt = <3300000>; | |
367 | }; | |
368 | ||
369 | vccpda_reg: LDO9 { | |
370 | regulator-name = "VCC_2.8V_PDA"; | |
371 | regulator-min-microvolt = <2800000>; | |
372 | regulator-max-microvolt = <2800000>; | |
373 | regulator-always-on; | |
374 | }; | |
375 | ||
376 | vpll_reg: LDO10 { | |
377 | regulator-name = "VPLL_1.1V_C210"; | |
378 | regulator-min-microvolt = <1100000>; | |
379 | regulator-max-microvolt = <1100000>; | |
380 | regulator-always-on; | |
381 | }; | |
382 | ||
383 | vtcam_reg: LDO12 { | |
384 | regulator-name = "VT_CAM_1.8V"; | |
385 | regulator-min-microvolt = <1800000>; | |
386 | regulator-max-microvolt = <1800000>; | |
387 | }; | |
388 | ||
389 | vcclcd_reg: LDO13 { | |
390 | regulator-name = "VCC_3.3V_LCD"; | |
391 | regulator-min-microvolt = <3300000>; | |
392 | regulator-max-microvolt = <3300000>; | |
393 | }; | |
394 | ||
395 | vlcd_reg: LDO15 { | |
396 | regulator-name = "VLCD_2.2V"; | |
397 | regulator-min-microvolt = <2200000>; | |
398 | regulator-max-microvolt = <2200000>; | |
399 | }; | |
400 | ||
401 | camsensor_reg: LDO16 { | |
402 | regulator-name = "CAM_SENSOR_IO_1.8V"; | |
403 | regulator-min-microvolt = <1800000>; | |
404 | regulator-max-microvolt = <1800000>; | |
405 | }; | |
406 | ||
407 | vddq_reg: LDO21 { | |
408 | regulator-name = "VDDQ_M1M2_1.2V"; | |
409 | regulator-min-microvolt = <1200000>; | |
410 | regulator-max-microvolt = <1200000>; | |
411 | regulator-always-on; | |
412 | }; | |
413 | ||
414 | varm_breg: BUCK1 { | |
415 | /* | |
416 | * HACK: The real name is VARM_1.2V_C210, | |
417 | * but exynos-cpufreq does not support | |
418 | * DT-based regulator lookup yet. | |
419 | */ | |
420 | regulator-name = "vdd_arm"; | |
421 | regulator-min-microvolt = <900000>; | |
422 | regulator-max-microvolt = <1350000>; | |
423 | regulator-always-on; | |
424 | }; | |
425 | ||
426 | vint_breg: BUCK2 { | |
427 | regulator-name = "VINT_1.1V_C210"; | |
428 | regulator-min-microvolt = <900000>; | |
429 | regulator-max-microvolt = <1100000>; | |
430 | regulator-always-on; | |
431 | }; | |
432 | ||
433 | camisp_breg: BUCK4 { | |
434 | regulator-name = "CAM_ISP_CORE_1.2V"; | |
435 | regulator-min-microvolt = <1200000>; | |
436 | regulator-max-microvolt = <1200000>; | |
437 | }; | |
438 | ||
439 | vmem_breg: BUCK5 { | |
440 | regulator-name = "VMEM_1.2V_C210"; | |
441 | regulator-min-microvolt = <1200000>; | |
442 | regulator-max-microvolt = <1200000>; | |
443 | regulator-always-on; | |
444 | }; | |
445 | ||
446 | vccsub_breg: BUCK7 { | |
447 | regulator-name = "VCC_SUB_2.0V"; | |
448 | regulator-min-microvolt = <2000000>; | |
449 | regulator-max-microvolt = <2000000>; | |
450 | regulator-always-on; | |
451 | }; | |
452 | ||
453 | safe1_sreg: ESAFEOUT1 { | |
454 | regulator-name = "SAFEOUT1"; | |
9b70afd9 KK |
455 | }; |
456 | ||
457 | safe2_sreg: ESAFEOUT2 { | |
458 | regulator-name = "SAFEOUT2"; | |
459 | regulator-boot-on; | |
460 | }; | |
461 | }; | |
462 | }; | |
463 | }; | |
464 | ||
465 | &sdhci_0 { | |
466 | bus-width = <8>; | |
467 | non-removable; | |
468 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; | |
469 | pinctrl-names = "default"; | |
470 | vmmc-supply = <&vemmc_reg>; | |
471 | status = "okay"; | |
472 | }; | |
473 | ||
474 | &serial_0 { | |
475 | status = "okay"; | |
476 | }; | |
477 | ||
478 | &serial_1 { | |
479 | status = "okay"; | |
480 | }; | |
481 | ||
482 | &serial_2 { | |
483 | status = "okay"; | |
484 | }; | |
485 | ||
486 | &serial_3 { | |
487 | status = "okay"; | |
488 | }; | |
489 | ||
490 | &tmu { | |
491 | status = "okay"; | |
492 | }; |