[deliverable/linux.git] / arch / arm / boot / dts / exynos4412-odroid-common.dtsi

/*
 * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
 * device tree source
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	chosen {
		stdout-path = &serial_1;
	};

	firmware@0204F000 {
		compatible = "samsung,secure-firmware";
		reg = <0x0204F000 0x1000>;
	};

	gpio_keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_power_key>;

		power_key {
			interrupt-parent = <&gpx1>;
			interrupts = <3 0>;
			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			label = "power key";
			debounce-interval = <10>;
			gpio-key,wakeup;
		};
	};

	sound: sound {
		compatible = "simple-audio-card";
		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
				<&clock_audss EXYNOS_MOUT_I2S>,
				<&clock_audss EXYNOS_DOUT_SRP>,
				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
				<&clock_audss EXYNOS_MOUT_AUDSS>;
		assigned-clock-rates = <0>,
				<0>,
				<192000000>,
				<19200000>;

		simple-audio-card,format = "i2s";
		simple-audio-card,bitclock-master = <&link0_codec>;
		simple-audio-card,frame-master = <&link0_codec>;

		simple-audio-card,cpu {
			sound-dai = <&i2s0 0>;
			system-clock-frequency = <19200000>;
		};

		link0_codec: simple-audio-card,codec {
			sound-dai = <&max98090>;
			clocks = <&i2s0 CLK_I2S_CDCLK>;
		};
	};

	emmc_pwrseq: pwrseq {
		pinctrl-0 = <&sd1_cd>;
		pinctrl-names = "default";
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
	};

	camera {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <>;
	};

	fixed-rate-clocks {
		xxti {
			compatible = "samsung,clock-xxti";
			clock-frequency = <0>;
		};

		xusbxti {
			compatible = "samsung,clock-xusbxti";
			clock-frequency = <24000000>;
		};
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			cooling-maps {
				map0 {
				     /* Corresponds to 800MHz at freq_table */
				     cooling-device = <&cpu0 7 7>;
				};
				map1 {
				     /* Corresponds to 200MHz at freq_table */
				     cooling-device = <&cpu0 13 13>;
			       };
		       };
		};
	};
};

&cpu0 {
	cpu0-supply = <&buck2_reg>;
};

/* RSTN signal for eMMC */
&sd1_cd {
	samsung,pin-pud = <0>;
	samsung,pin-drv = <0>;
};

&pinctrl_1 {
	gpio_power_key: power_key {
		samsung,pins = "gpx1-3";
		samsung,pin-pud = <0>;
	};

	max77686_irq: max77686-irq {
		samsung,pins = "gpx3-2";
		samsung,pin-function = <0>;
		samsung,pin-pud = <0>;
		samsung,pin-drv = <0>;
	};

	hdmi_hpd: hdmi-hpd {
		samsung,pins = "gpx3-7";
		samsung,pin-pud = <1>;
	};
};

&ehci {
	status = "okay";
};

&exynos_usbphy {
	status = "okay";
};

&fimc_0 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
			<&clock CLK_SCLK_FIMC0>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_1 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
			<&clock CLK_SCLK_FIMC1>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_2 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
			<&clock CLK_SCLK_FIMC2>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&fimc_3 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
			<&clock CLK_SCLK_FIMC3>;
	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	assigned-clock-rates = <0>, <176000000>;
};

&hdmi {
	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&hdmi_hpd>;
	vdd-supply = <&ldo8_reg>;
	vdd_osc-supply = <&ldo10_reg>;
	vdd_pll-supply = <&ldo8_reg>;
	ddc = <&i2c_2>;
	status = "okay";
};

&hsotg {
	dr_mode = "peripheral";
	status = "okay";
	vusb_d-supply = <&ldo15_reg>;
	vusb_a-supply = <&ldo12_reg>;
};

&i2c_0 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <400000>;
	status = "okay";

	usb3503: usb3503@08 {
		compatible = "smsc,usb3503";
		reg = <0x08>;

		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
		initial-mode = <1>;
	};

	max77686: pmic@09 {
		compatible = "maxim,max77686";
		interrupt-parent = <&gpx3>;
		interrupts = <2 0>;
		pinctrl-names = "default";
		pinctrl-0 = <&max77686_irq>;
		reg = <0x09>;
		#clock-cells = <1>;

		voltage-regulators {
			ldo1_reg: LDO1 {
				regulator-name = "VDD_ALIVE_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo2_reg: LDO2 {
				regulator-name = "VDDQ_M1_2_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo3_reg: LDO3 {
				regulator-name = "VDDQ_EXT_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo4_reg: LDO4 {
				regulator-name = "VDDQ_MMC2_2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo5_reg: LDO5 {
				regulator-name = "VDDQ_MMC1_3_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo6_reg: LDO6 {
				regulator-name = "VDD10_MPLL_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo7_reg: LDO7 {
				regulator-name = "VDD10_XPLL_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo8_reg: LDO8 {
				regulator-name = "VDD10_HDMI_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
			};

			ldo10_reg: LDO10 {
				regulator-name = "VDDQ_MIPIHSI_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
			};

			ldo11_reg: LDO11 {
				regulator-name = "VDD18_ABB1_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo12_reg: LDO12 {
				regulator-name = "VDD33_USB_3.3V";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo13_reg: LDO13 {
				regulator-name = "VDDQ_C2C_W_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo14_reg: LDO14 {
				regulator-name = "VDD18_ABB0_2_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo15_reg: LDO15 {
				regulator-name = "VDD10_HSIC_1.0V";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo16_reg: LDO16 {
				regulator-name = "VDD18_HSIC_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo20_reg: LDO20 {
				regulator-name = "LDO20_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
			};

			ldo21_reg: LDO21 {
				regulator-name = "LDO21_3.3V";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo25_reg: LDO25 {
				regulator-name = "VDDQ_LCD_1.8V";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck1_reg: BUCK1 {
				regulator-name = "vdd_mif";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck2_reg: BUCK2 {
				regulator-name = "vdd_arm";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck3_reg: BUCK3 {
				regulator-name = "vdd_int";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck4_reg: BUCK4 {
				regulator-name = "vdd_g3d";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1100000>;
				regulator-microvolt-offset = <50000>;
			};

			buck5_reg: BUCK5 {
				regulator-name = "VDDQ_CKEM1_2_1.2V";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck6_reg: BUCK6 {
				regulator-name = "BUCK6_1.35V";
				regulator-min-microvolt = <1350000>;
				regulator-max-microvolt = <1350000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck7_reg: BUCK7 {
				regulator-name = "BUCK7_2.0V";
				regulator-min-microvolt = <2000000>;
				regulator-max-microvolt = <2000000>;
				regulator-always-on;
			};

			buck8_reg: BUCK8 {
				regulator-name = "BUCK8_2.8V";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
			};
		};
	};
};

&i2c_1 {
	status = "okay";
	max98090: max98090@10 {
		compatible = "maxim,max98090";
		reg = <0x10>;
		interrupt-parent = <&gpx0>;
		interrupts = <0 0>;
		clocks = <&i2s0 CLK_I2S_CDCLK>;
		clock-names = "mclk";
		#sound-dai-cells = <0>;
	};
};

&i2c_2 {
	status = "okay";
};

&i2c_8 {
	status = "okay";
};

&i2s0 {
	pinctrl-0 = <&i2s0_bus>;
	pinctrl-names = "default";
	status = "okay";
	clocks = <&clock_audss EXYNOS_I2S_BUS>,
		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
		 <&clock_audss EXYNOS_SCLK_I2S>;
	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};

&mixer {
	status = "okay";
};

&mshc_0 {
	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
	pinctrl-names = "default";
	vmmc-supply = <&ldo20_reg &buck8_reg>;
	mmc-pwrseq = <&emmc_pwrseq>;
	status = "okay";

	num-slots = <1>;
	broken-cd;
	card-detect-delay = <200>;
	samsung,dw-mshc-ciu-div = <3>;
	samsung,dw-mshc-sdr-timing = <2 3>;
	samsung,dw-mshc-ddr-timing = <1 2>;
	bus-width = <8>;
	cap-mmc-highspeed;
};

&rtc {
	status = "okay";
	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
	clock-names = "rtc", "rtc_src";
};

&sdhci_2 {
	bus-width = <4>;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
	pinctrl-names = "default";
	vmmc-supply = <&ldo4_reg &ldo21_reg>;
	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
	cd-inverted;
	status = "okay";
};

&serial_0 {
	status = "okay";
};

&serial_1 {
	status = "okay";
};

&tmu {
	vtmu-supply = <&ldo10_reg>;
	status = "okay";
};

&watchdog {
	status = "okay";
};
Commit	Line	Data
ec601ff3 MS	1	/*
	2	* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
	3	* device tree source
	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 as
	7	* published by the Free Software Foundation.
	8	*/
	9
3635acef	10	#include <dt-bindings/sound/samsung-i2s.h>
081a15e3	11	#include <dt-bindings/input/input.h>
ee2020a4	12	#include <dt-bindings/clock/maxim,max77686.h>
ec601ff3	13	#include "exynos4412.dtsi"
c10d3290	14	#include <dt-bindings/gpio/gpio.h>
ec601ff3 MS	15
ec601ff3 MS	16	/ {
62d38099 TF	17	chosen {
	18	stdout-path = &serial_1;
	19	};
	20
ec601ff3 MS	21	firmware@0204F000 {
	22	compatible = "samsung,secure-firmware";
	23	reg = <0x0204F000 0x1000>;
	24	};
	25
081a15e3 MS	26	gpio_keys {
	27	compatible = "gpio-keys";
	28	pinctrl-names = "default";
	29	pinctrl-0 = <&gpio_power_key>;
	30
	31	power_key {
	32	interrupt-parent = <&gpx1>;
	33	interrupts = <3 0>;
c10d3290	34	gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
081a15e3 MS	35	linux,code = <KEY_POWER>;
	36	label = "power key";
	37	debounce-interval = <10>;
	38	gpio-key,wakeup;
	39	};
	40	};
	41
5a852743	42	sound: sound {
16696337	43	compatible = "simple-audio-card";
59760009 SN	44	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
	45	<&clock_audss EXYNOS_MOUT_I2S>,
	46	<&clock_audss EXYNOS_DOUT_SRP>,
	47	<&clock_audss EXYNOS_DOUT_AUD_BUS>;
	48	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
	49	<&clock_audss EXYNOS_MOUT_AUDSS>;
	50	assigned-clock-rates = <0>,
	51	<0>,
	52	<192000000>,
	53	<19200000>;
16696337 SN	54
	55	simple-audio-card,format = "i2s";
	56	simple-audio-card,bitclock-master = <&link0_codec>;
	57	simple-audio-card,frame-master = <&link0_codec>;
	58
	59	simple-audio-card,cpu {
	60	sound-dai = <&i2s0 0>;
	61	system-clock-frequency = <19200000>;
	62	};
	63
	64	link0_codec: simple-audio-card,codec {
	65	sound-dai = <&max98090>;
	66	clocks = <&i2s0 CLK_I2S_CDCLK>;
	67	};
5a852743 SN	68	};
5a852743 SN	69
225da7e6 MS	70	emmc_pwrseq: pwrseq {
	71	pinctrl-0 = <&sd1_cd>;
	72	pinctrl-names = "default";
	73	compatible = "mmc-pwrseq-emmc";
c10d3290	74	reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
225da7e6 MS	75	};
225da7e6 MS	76
ec601ff3 MS	77	camera {
	78	status = "okay";
	79	pinctrl-names = "default";
	80	pinctrl-0 = <>;
49c1a163	81	};
ec601ff3	82
49c1a163 KK	83	fixed-rate-clocks {
	84	xxti {
	85	compatible = "samsung,clock-xxti";
	86	clock-frequency = <0>;
ec601ff3 MS	87	};
ec601ff3 MS	88
49c1a163 KK	89	xusbxti {
	90	compatible = "samsung,clock-xusbxti";
	91	clock-frequency = <24000000>;
ec601ff3	92	};
49c1a163	93	};
ec601ff3	94
49c1a163 KK	95	thermal-zones {
	96	cpu_thermal: cpu-thermal {
	97	cooling-maps {
	98	map0 {
	99	/* Corresponds to 800MHz at freq_table */
	100	cooling-device = <&cpu0 7 7>;
	101	};
	102	map1 {
	103	/* Corresponds to 200MHz at freq_table */
	104	cooling-device = <&cpu0 13 13>;
	105	};
	106	};
ec601ff3 MS	107	};
ec601ff3 MS	108	};
49c1a163	109	};
ec601ff3	110
f4499741 BZ	111	&cpu0 {
	112	cpu0-supply = <&buck2_reg>;
	113	};
	114
49c1a163 KK	115	/* RSTN signal for eMMC */
	116	&sd1_cd {
	117	samsung,pin-pud = <0>;
	118	samsung,pin-drv = <0>;
	119	};
ec601ff3	120
49c1a163 KK	121	&pinctrl_1 {
	122	gpio_power_key: power_key {
	123	samsung,pins = "gpx1-3";
	124	samsung,pin-pud = <0>;
ec601ff3 MS	125	};
ec601ff3 MS	126
49c1a163 KK	127	max77686_irq: max77686-irq {
	128	samsung,pins = "gpx3-2";
	129	samsung,pin-function = <0>;
	130	samsung,pin-pud = <0>;
	131	samsung,pin-drv = <0>;
ec601ff3 MS	132	};
ec601ff3 MS	133
49c1a163 KK	134	hdmi_hpd: hdmi-hpd {
	135	samsung,pins = "gpx3-7";
	136	samsung,pin-pud = <1>;
ec601ff3	137	};
49c1a163	138	};
ec601ff3	139
49c1a163 KK	140	&ehci {
	141	status = "okay";
	142	};
ec601ff3	143
49c1a163 KK	144	&exynos_usbphy {
	145	status = "okay";
	146	};
ec601ff3	147
49c1a163 KK	148	&fimc_0 {
	149	status = "okay";
	150	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
	151	<&clock CLK_SCLK_FIMC0>;
	152	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	153	assigned-clock-rates = <0>, <176000000>;
	154	};
ec601ff3	155
49c1a163 KK	156	&fimc_1 {
	157	status = "okay";
	158	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
	159	<&clock CLK_SCLK_FIMC1>;
	160	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	161	assigned-clock-rates = <0>, <176000000>;
	162	};
ec601ff3	163
49c1a163 KK	164	&fimc_2 {
	165	status = "okay";
	166	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
	167	<&clock CLK_SCLK_FIMC2>;
	168	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	169	assigned-clock-rates = <0>, <176000000>;
	170	};
ec601ff3	171
49c1a163 KK	172	&fimc_3 {
	173	status = "okay";
	174	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
	175	<&clock CLK_SCLK_FIMC3>;
	176	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	177	assigned-clock-rates = <0>, <176000000>;
	178	};
ec601ff3	179
49c1a163	180	&hdmi {
c10d3290	181	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
49c1a163 KK	182	pinctrl-names = "default";
	183	pinctrl-0 = <&hdmi_hpd>;
	184	vdd-supply = <&ldo8_reg>;
	185	vdd_osc-supply = <&ldo10_reg>;
	186	vdd_pll-supply = <&ldo8_reg>;
	187	ddc = <&i2c_2>;
	188	status = "okay";
	189	};
ec601ff3	190
49c1a163 KK	191	&hsotg {
	192	dr_mode = "peripheral";
	193	status = "okay";
	194	vusb_d-supply = <&ldo15_reg>;
	195	vusb_a-supply = <&ldo12_reg>;
	196	};
ec601ff3	197
49c1a163	198	&i2c_0 {
49c1a163 KK	199	samsung,i2c-sda-delay = <100>;
	200	samsung,i2c-max-bus-freq = <400000>;
	201	status = "okay";
	202
	203	usb3503: usb3503@08 {
	204	compatible = "smsc,usb3503";
	205	reg = <0x08>;
	206
c10d3290 JMC	207	intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
	208	connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
	209	reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
49c1a163 KK	210	initial-mode = <1>;
49c1a163 KK	211	};
ec601ff3	212
49c1a163 KK	213	max77686: pmic@09 {
	214	compatible = "maxim,max77686";
	215	interrupt-parent = <&gpx3>;
	216	interrupts = <2 0>;
	217	pinctrl-names = "default";
	218	pinctrl-0 = <&max77686_irq>;
	219	reg = <0x09>;
	220	#clock-cells = <1>;
	221
	222	voltage-regulators {
	223	ldo1_reg: LDO1 {
	224	regulator-name = "VDD_ALIVE_1.0V";
	225	regulator-min-microvolt = <1000000>;
	226	regulator-max-microvolt = <1000000>;
	227	regulator-always-on;
	228	};
2561658b	229
49c1a163 KK	230	ldo2_reg: LDO2 {
	231	regulator-name = "VDDQ_M1_2_1.8V";
	232	regulator-min-microvolt = <1800000>;
	233	regulator-max-microvolt = <1800000>;
	234	regulator-always-on;
	235	};
a59acc17	236
49c1a163 KK	237	ldo3_reg: LDO3 {
	238	regulator-name = "VDDQ_EXT_1.8V";
	239	regulator-min-microvolt = <1800000>;
	240	regulator-max-microvolt = <1800000>;
	241	regulator-always-on;
	242	};
ec601ff3	243
49c1a163 KK	244	ldo4_reg: LDO4 {
	245	regulator-name = "VDDQ_MMC2_2.8V";
	246	regulator-min-microvolt = <2800000>;
	247	regulator-max-microvolt = <2800000>;
	248	regulator-always-on;
	249	regulator-boot-on;
	250	};
ec601ff3	251
49c1a163 KK	252	ldo5_reg: LDO5 {
	253	regulator-name = "VDDQ_MMC1_3_1.8V";
	254	regulator-min-microvolt = <1800000>;
	255	regulator-max-microvolt = <1800000>;
	256	regulator-always-on;
	257	regulator-boot-on;
	258	};
ec601ff3	259
49c1a163 KK	260	ldo6_reg: LDO6 {
	261	regulator-name = "VDD10_MPLL_1.0V";
	262	regulator-min-microvolt = <1000000>;
	263	regulator-max-microvolt = <1000000>;
	264	regulator-always-on;
	265	};
ec601ff3	266
49c1a163 KK	267	ldo7_reg: LDO7 {
	268	regulator-name = "VDD10_XPLL_1.0V";
	269	regulator-min-microvolt = <1000000>;
	270	regulator-max-microvolt = <1000000>;
	271	regulator-always-on;
	272	};
ec601ff3	273
00e5e8c4	274	ldo8_reg: LDO8 {
49c1a163 KK	275	regulator-name = "VDD10_HDMI_1.0V";
	276	regulator-min-microvolt = <1000000>;
	277	regulator-max-microvolt = <1000000>;
	278	};
ec601ff3	279
00e5e8c4	280	ldo10_reg: LDO10 {
49c1a163 KK	281	regulator-name = "VDDQ_MIPIHSI_1.8V";
	282	regulator-min-microvolt = <1800000>;
	283	regulator-max-microvolt = <1800000>;
	284	};
ec601ff3	285
49c1a163 KK	286	ldo11_reg: LDO11 {
	287	regulator-name = "VDD18_ABB1_1.8V";
	288	regulator-min-microvolt = <1800000>;
	289	regulator-max-microvolt = <1800000>;
	290	regulator-always-on;
	291	};
ec601ff3	292
49c1a163 KK	293	ldo12_reg: LDO12 {
	294	regulator-name = "VDD33_USB_3.3V";
	295	regulator-min-microvolt = <3300000>;
	296	regulator-max-microvolt = <3300000>;
	297	regulator-always-on;
	298	regulator-boot-on;
	299	};
ec601ff3	300
49c1a163 KK	301	ldo13_reg: LDO13 {
	302	regulator-name = "VDDQ_C2C_W_1.8V";
	303	regulator-min-microvolt = <1800000>;
	304	regulator-max-microvolt = <1800000>;
	305	regulator-always-on;
	306	regulator-boot-on;
	307	};
ec601ff3	308
49c1a163 KK	309	ldo14_reg: LDO14 {
	310	regulator-name = "VDD18_ABB0_2_1.8V";
	311	regulator-min-microvolt = <1800000>;
	312	regulator-max-microvolt = <1800000>;
	313	regulator-always-on;
	314	regulator-boot-on;
	315	};
ec601ff3	316
49c1a163 KK	317	ldo15_reg: LDO15 {
	318	regulator-name = "VDD10_HSIC_1.0V";
	319	regulator-min-microvolt = <1000000>;
	320	regulator-max-microvolt = <1000000>;
	321	regulator-always-on;
	322	regulator-boot-on;
	323	};
ec601ff3	324
49c1a163 KK	325	ldo16_reg: LDO16 {
	326	regulator-name = "VDD18_HSIC_1.8V";
	327	regulator-min-microvolt = <1800000>;
	328	regulator-max-microvolt = <1800000>;
	329	regulator-always-on;
	330	regulator-boot-on;
	331	};
ec601ff3	332
49c1a163 KK	333	ldo20_reg: LDO20 {
	334	regulator-name = "LDO20_1.8V";
	335	regulator-min-microvolt = <1800000>;
	336	regulator-max-microvolt = <1800000>;
	337	regulator-boot-on;
	338	};
ec601ff3	339
49c1a163 KK	340	ldo21_reg: LDO21 {
	341	regulator-name = "LDO21_3.3V";
	342	regulator-min-microvolt = <3300000>;
	343	regulator-max-microvolt = <3300000>;
	344	regulator-always-on;
	345	regulator-boot-on;
	346	};
ec601ff3	347
49c1a163 KK	348	ldo25_reg: LDO25 {
	349	regulator-name = "VDDQ_LCD_1.8V";
	350	regulator-min-microvolt = <1800000>;
	351	regulator-max-microvolt = <1800000>;
	352	regulator-always-on;
	353	regulator-boot-on;
	354	};
ec601ff3	355
49c1a163 KK	356	buck1_reg: BUCK1 {
	357	regulator-name = "vdd_mif";
	358	regulator-min-microvolt = <1000000>;
	359	regulator-max-microvolt = <1000000>;
	360	regulator-always-on;
	361	regulator-boot-on;
ec601ff3	362	};
ec601ff3	363
49c1a163 KK	364	buck2_reg: BUCK2 {
	365	regulator-name = "vdd_arm";
	366	regulator-min-microvolt = <900000>;
	367	regulator-max-microvolt = <1350000>;
	368	regulator-always-on;
	369	regulator-boot-on;
	370	};
5a852743	371
49c1a163 KK	372	buck3_reg: BUCK3 {
	373	regulator-name = "vdd_int";
	374	regulator-min-microvolt = <1000000>;
	375	regulator-max-microvolt = <1000000>;
	376	regulator-always-on;
	377	regulator-boot-on;
	378	};
ec601ff3	379
49c1a163 KK	380	buck4_reg: BUCK4 {
	381	regulator-name = "vdd_g3d";
	382	regulator-min-microvolt = <900000>;
	383	regulator-max-microvolt = <1100000>;
	384	regulator-microvolt-offset = <50000>;
	385	};
ec601ff3	386
49c1a163 KK	387	buck5_reg: BUCK5 {
	388	regulator-name = "VDDQ_CKEM1_2_1.2V";
	389	regulator-min-microvolt = <1200000>;
	390	regulator-max-microvolt = <1200000>;
	391	regulator-always-on;
	392	regulator-boot-on;
	393	};
233e274a	394
49c1a163 KK	395	buck6_reg: BUCK6 {
	396	regulator-name = "BUCK6_1.35V";
	397	regulator-min-microvolt = <1350000>;
	398	regulator-max-microvolt = <1350000>;
	399	regulator-always-on;
	400	regulator-boot-on;
	401	};
bf4a0bed	402
49c1a163 KK	403	buck7_reg: BUCK7 {
	404	regulator-name = "BUCK7_2.0V";
	405	regulator-min-microvolt = <2000000>;
	406	regulator-max-microvolt = <2000000>;
	407	regulator-always-on;
	408	};
	409
	410	buck8_reg: BUCK8 {
	411	regulator-name = "BUCK8_2.8V";
	412	regulator-min-microvolt = <2800000>;
	413	regulator-max-microvolt = <2800000>;
	414	};
bf4a0bed LM	415	};
bf4a0bed LM	416	};
49c1a163	417	};
2561658b	418
49c1a163	419	&i2c_1 {
49c1a163 KK	420	status = "okay";
	421	max98090: max98090@10 {
	422	compatible = "maxim,max98090";
	423	reg = <0x10>;
	424	interrupt-parent = <&gpx0>;
	425	interrupts = <0 0>;
	426	clocks = <&i2s0 CLK_I2S_CDCLK>;
	427	clock-names = "mclk";
	428	#sound-dai-cells = <0>;
2561658b	429	};
49c1a163	430	};
2561658b	431
49c1a163 KK	432	&i2c_2 {
49c1a163 KK	433	status = "okay";
49c1a163	434	};
2561658b	435
49c1a163 KK	436	&i2c_8 {
	437	status = "okay";
	438	};
2561658b	439
49c1a163 KK	440	&i2s0 {
	441	pinctrl-0 = <&i2s0_bus>;
	442	pinctrl-names = "default";
	443	status = "okay";
	444	clocks = <&clock_audss EXYNOS_I2S_BUS>,
	445	<&clock_audss EXYNOS_DOUT_AUD_BUS>,
	446	<&clock_audss EXYNOS_SCLK_I2S>;
	447	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
ec601ff3	448	};
081a15e3	449
49c1a163 KK	450	&mixer {
49c1a163 KK	451	status = "okay";
225da7e6 MS	452	};
225da7e6 MS	453
49c1a163 KK	454	&mshc_0 {
	455	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
	456	pinctrl-names = "default";
	457	vmmc-supply = <&ldo20_reg &buck8_reg>;
	458	mmc-pwrseq = <&emmc_pwrseq>;
	459	status = "okay";
	460
	461	num-slots = <1>;
	462	broken-cd;
	463	card-detect-delay = <200>;
	464	samsung,dw-mshc-ciu-div = <3>;
	465	samsung,dw-mshc-sdr-timing = <2 3>;
	466	samsung,dw-mshc-ddr-timing = <1 2>;
	467	bus-width = <8>;
	468	cap-mmc-highspeed;
	469	};
eea6653a	470
49c1a163 KK	471	&rtc {
	472	status = "okay";
	473	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
	474	clock-names = "rtc", "rtc_src";
	475	};
2561658b	476
49c1a163 KK	477	&sdhci_2 {
	478	bus-width = <4>;
	479	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
	480	pinctrl-names = "default";
	481	vmmc-supply = <&ldo4_reg &ldo21_reg>;
c10d3290	482	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
49c1a163 KK	483	cd-inverted;
	484	status = "okay";
	485	};
	486
	487	&serial_0 {
	488	status = "okay";
	489	};
	490
	491	&serial_1 {
	492	status = "okay";
	493	};
	494
	495	&tmu {
	496	vtmu-supply = <&ldo10_reg>;
	497	status = "okay";
	498	};
	499
	500	&watchdog {
	501	status = "okay";
081a15e3	502	};