[deliverable/linux.git] / arch / arm / boot / dts / exynos4412-odroid-common.dtsi

/*
 * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
 * device tree source
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
#include "exynos4412.dtsi"

/ {
	chosen {
		stdout-path = &serial_1;
	};

	firmware@0204F000 {
		compatible = "samsung,secure-firmware";
		reg = <0x0204F000 0x1000>;
	};

	gpio_keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_power_key>;

		power_key {
			interrupt-parent = <&gpx1>;
			interrupts = <3 0>;
			gpios = <&gpx1 3 1>;
			linux,code = <KEY_POWER>;
			label = "power key";
			debounce-interval = <10>;
			gpio-key,wakeup;
		};
	};

	i2s0: i2s@03830000 {
		pinctrl-0 = <&i2s0_bus>;
		pinctrl-names = "default";
		status = "okay";
		clocks = <&clock_audss EXYNOS_I2S_BUS>,
			 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
			 <&clock_audss EXYNOS_SCLK_I2S>;
		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
	};

	sound: sound {
		compatible = "simple-audio-card";
		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
				<&clock_audss EXYNOS_MOUT_I2S>,
				<&clock_audss EXYNOS_DOUT_SRP>,
				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
				<&clock_audss EXYNOS_MOUT_AUDSS>;
		assigned-clock-rates = <0>,
				<0>,
				<192000000>,
				<19200000>;

		simple-audio-card,format = "i2s";
		simple-audio-card,bitclock-master = <&link0_codec>;
		simple-audio-card,frame-master = <&link0_codec>;

		simple-audio-card,cpu {
			sound-dai = <&i2s0 0>;
			system-clock-frequency = <19200000>;
		};

		link0_codec: simple-audio-card,codec {
			sound-dai = <&max98090>;
			clocks = <&i2s0 CLK_I2S_CDCLK>;
		};
	};

	emmc_pwrseq: pwrseq {
		pinctrl-0 = <&sd1_cd>;
		pinctrl-names = "default";
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <&gpk1 2 1>;
	};

	mmc@12550000 {
		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
		pinctrl-names = "default";
		vmmc-supply = <&ldo20_reg &buck8_reg>;
		mmc-pwrseq = <&emmc_pwrseq>;
		status = "okay";

		num-slots = <1>;
		broken-cd;
		card-detect-delay = <200>;
		samsung,dw-mshc-ciu-div = <3>;
		samsung,dw-mshc-sdr-timing = <2 3>;
		samsung,dw-mshc-ddr-timing = <1 2>;
		bus-width = <8>;
		cap-mmc-highspeed;
	};

	watchdog@10060000 {
		status = "okay";
	};

	rtc@10070000 {
		status = "okay";
	};

	g2d@10800000 {
		status = "okay";
	};

	camera {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <>;

		fimc_0: fimc@11800000 {
			status = "okay";
			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
					<&clock CLK_SCLK_FIMC0>;
			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
			assigned-clock-rates = <0>, <176000000>;
		};

		fimc_1: fimc@11810000 {
			status = "okay";
			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
					<&clock CLK_SCLK_FIMC1>;
			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
			assigned-clock-rates = <0>, <176000000>;
		};

		fimc_2: fimc@11820000 {
			status = "okay";
			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
					<&clock CLK_SCLK_FIMC2>;
			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
			assigned-clock-rates = <0>, <176000000>;
		};

		fimc_3: fimc@11830000 {
			status = "okay";
			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
					<&clock CLK_SCLK_FIMC3>;
			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
			assigned-clock-rates = <0>, <176000000>;
		};
	};

	sdhci@12530000 {
		bus-width = <4>;
		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
		pinctrl-names = "default";
		vmmc-supply = <&ldo4_reg &ldo21_reg>;
		cd-gpios = <&gpk2 2 0>;
		cd-inverted;
		status = "okay";
	};

	serial@13800000 {
		status = "okay";
	};

	serial@13810000 {
		status = "okay";
	};

	fixed-rate-clocks {
		xxti {
			compatible = "samsung,clock-xxti";
			clock-frequency = <0>;
		};

		xusbxti {
			compatible = "samsung,clock-xusbxti";
			clock-frequency = <24000000>;
		};
	};

	i2c@13860000 {
		pinctrl-0 = <&i2c0_bus>;
		pinctrl-names = "default";
		samsung,i2c-sda-delay = <100>;
		samsung,i2c-max-bus-freq = <400000>;
		status = "okay";

		usb3503: usb3503@08 {
			compatible = "smsc,usb3503";
			reg = <0x08>;

			intn-gpios = <&gpx3 0 0>;
			connect-gpios = <&gpx3 4 0>;
			reset-gpios = <&gpx3 5 0>;
			initial-mode = <1>;
		};

		max77686: pmic@09 {
			compatible = "maxim,max77686";
			interrupt-parent = <&gpx3>;
			interrupts = <2 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&max77686_irq>;
			reg = <0x09>;
			#clock-cells = <1>;

			voltage-regulators {
				ldo1_reg: LDO1 {
					regulator-name = "VDD_ALIVE_1.0V";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
				};

				ldo2_reg: LDO2 {
					regulator-name = "VDDQ_M1_2_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo3_reg: LDO3 {
					regulator-name = "VDDQ_EXT_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo4_reg: LDO4 {
					regulator-name = "VDDQ_MMC2_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo5_reg: LDO5 {
					regulator-name = "VDDQ_MMC1_3_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo6_reg: LDO6 {
					regulator-name = "VDD10_MPLL_1.0V";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
				};

				ldo7_reg: LDO7 {
					regulator-name = "VDD10_XPLL_1.0V";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
				};

				ldo8_reg: ldo@8 {
					regulator-compatible = "LDO8";
					regulator-name = "VDD10_HDMI_1.0V";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
				};

				ldo10_reg: ldo@10 {
					regulator-compatible = "LDO10";
					regulator-name = "VDDQ_MIPIHSI_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo11_reg: LDO11 {
					regulator-name = "VDD18_ABB1_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo12_reg: LDO12 {
					regulator-name = "VDD33_USB_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo13_reg: LDO13 {
					regulator-name = "VDDQ_C2C_W_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo14_reg: LDO14 {
					regulator-name = "VDD18_ABB0_2_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo15_reg: LDO15 {
					regulator-name = "VDD10_HSIC_1.0V";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo16_reg: LDO16 {
					regulator-name = "VDD18_HSIC_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo20_reg: LDO20 {
					regulator-name = "LDO20_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-boot-on;
				};

				ldo21_reg: LDO21 {
					regulator-name = "LDO21_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo25_reg: LDO25 {
					regulator-name = "VDDQ_LCD_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck1_reg: BUCK1 {
					regulator-name = "vdd_mif";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck2_reg: BUCK2 {
					regulator-name = "vdd_arm";
					regulator-min-microvolt = <900000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck3_reg: BUCK3 {
					regulator-name = "vdd_int";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck4_reg: BUCK4 {
					regulator-name = "vdd_g3d";
					regulator-min-microvolt = <900000>;
					regulator-max-microvolt = <1100000>;
					regulator-microvolt-offset = <50000>;
				};

				buck5_reg: BUCK5 {
					regulator-name = "VDDQ_CKEM1_2_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck6_reg: BUCK6 {
					regulator-name = "BUCK6_1.35V";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				buck7_reg: BUCK7 {
					regulator-name = "BUCK7_2.0V";
					regulator-min-microvolt = <2000000>;
					regulator-max-microvolt = <2000000>;
					regulator-always-on;
				};

				buck8_reg: BUCK8 {
					regulator-name = "BUCK8_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};
			};
		};
	};

	i2c@13870000 {
		pinctrl-names = "default";
		pinctrl-0 = <&i2c1_bus>;
		status = "okay";
		max98090: max98090@10 {
			compatible = "maxim,max98090";
			reg = <0x10>;
			interrupt-parent = <&gpx0>;
			interrupts = <0 0>;
			clocks = <&i2s0 CLK_I2S_CDCLK>;
			clock-names = "mclk";
			#sound-dai-cells = <0>;
		};
	};

	exynos-usbphy@125B0000 {
		status = "okay";
	};

	hsotg@12480000 {
		dr_mode = "peripheral";
		status = "okay";
		vusb_d-supply = <&ldo15_reg>;
		vusb_a-supply = <&ldo12_reg>;
	};

	ehci: ehci@12580000 {
		status = "okay";
	};

	tmu@100C0000 {
		vtmu-supply = <&ldo10_reg>;
		status = "okay";
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			cooling-maps {
				map0 {
				     /* Corresponds to 800MHz at freq_table */
				     cooling-device = <&cpu0 7 7>;
				};
				map1 {
				     /* Corresponds to 200MHz at freq_table */
				     cooling-device = <&cpu0 13 13>;
			       };
		       };
		};
	};

	mixer: mixer@12C10000 {
		status = "okay";
	};

	hdmi@12D00000 {
		hpd-gpio = <&gpx3 7 0>;
		pinctrl-names = "default";
		pinctrl-0 = <&hdmi_hpd>;
		vdd-supply = <&ldo8_reg>;
		vdd_osc-supply = <&ldo10_reg>;
		vdd_pll-supply = <&ldo8_reg>;
		ddc = <&hdmi_ddc>;
		status = "okay";
	};

	hdmi_ddc: i2c@13880000 {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_bus>;
	};

	i2c@138E0000 {
		status = "okay";
	};
};

/* RSTN signal for eMMC */
&sd1_cd {
	samsung,pin-pud = <0>;
	samsung,pin-drv = <0>;
};

&pinctrl_1 {
	gpio_power_key: power_key {
		samsung,pins = "gpx1-3";
		samsung,pin-pud = <0>;
	};

	max77686_irq: max77686-irq {
		samsung,pins = "gpx3-2";
		samsung,pin-function = <0>;
		samsung,pin-pud = <0>;
		samsung,pin-drv = <0>;
	};

	hdmi_hpd: hdmi-hpd {
		samsung,pins = "gpx3-7";
		samsung,pin-pud = <1>;
	};
};
Commit	Line	Data
ec601ff3 MS	1	/*
	2	* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
	3	* device tree source
	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 as
	7	* published by the Free Software Foundation.
	8	*/
	9
3635acef	10	#include <dt-bindings/sound/samsung-i2s.h>
081a15e3	11	#include <dt-bindings/input/input.h>
ec601ff3 MS	12	#include "exynos4412.dtsi"
	13
	14	/ {
62d38099 TF	15	chosen {
	16	stdout-path = &serial_1;
	17	};
	18
ec601ff3 MS	19	firmware@0204F000 {
	20	compatible = "samsung,secure-firmware";
	21	reg = <0x0204F000 0x1000>;
	22	};
	23
081a15e3 MS	24	gpio_keys {
	25	compatible = "gpio-keys";
	26	pinctrl-names = "default";
	27	pinctrl-0 = <&gpio_power_key>;
	28
	29	power_key {
	30	interrupt-parent = <&gpx1>;
	31	interrupts = <3 0>;
	32	gpios = <&gpx1 3 1>;
	33	linux,code = <KEY_POWER>;
	34	label = "power key";
	35	debounce-interval = <10>;
	36	gpio-key,wakeup;
	37	};
	38	};
	39
5a852743 SN	40	i2s0: i2s@03830000 {
	41	pinctrl-0 = <&i2s0_bus>;
	42	pinctrl-names = "default";
	43	status = "okay";
	44	clocks = <&clock_audss EXYNOS_I2S_BUS>,
3635acef SN	45	<&clock_audss EXYNOS_DOUT_AUD_BUS>,
	46	<&clock_audss EXYNOS_SCLK_I2S>;
	47	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
5a852743 SN	48	};
	49
	50	sound: sound {
16696337	51	compatible = "simple-audio-card";
59760009 SN	52	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
	53	<&clock_audss EXYNOS_MOUT_I2S>,
	54	<&clock_audss EXYNOS_DOUT_SRP>,
	55	<&clock_audss EXYNOS_DOUT_AUD_BUS>;
	56	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
	57	<&clock_audss EXYNOS_MOUT_AUDSS>;
	58	assigned-clock-rates = <0>,
	59	<0>,
	60	<192000000>,
	61	<19200000>;
16696337 SN	62
	63	simple-audio-card,format = "i2s";
	64	simple-audio-card,bitclock-master = <&link0_codec>;
	65	simple-audio-card,frame-master = <&link0_codec>;
	66
	67	simple-audio-card,cpu {
	68	sound-dai = <&i2s0 0>;
	69	system-clock-frequency = <19200000>;
	70	};
	71
	72	link0_codec: simple-audio-card,codec {
	73	sound-dai = <&max98090>;
	74	clocks = <&i2s0 CLK_I2S_CDCLK>;
	75	};
5a852743 SN	76	};
5a852743 SN	77
225da7e6 MS	78	emmc_pwrseq: pwrseq {
	79	pinctrl-0 = <&sd1_cd>;
	80	pinctrl-names = "default";
	81	compatible = "mmc-pwrseq-emmc";
	82	reset-gpios = <&gpk1 2 1>;
	83	};
	84
ec601ff3 MS	85	mmc@12550000 {
	86	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
	87	pinctrl-names = "default";
	88	vmmc-supply = <&ldo20_reg &buck8_reg>;
225da7e6	89	mmc-pwrseq = <&emmc_pwrseq>;
ec601ff3 MS	90	status = "okay";
	91
	92	num-slots = <1>;
ec601ff3 MS	93	broken-cd;
	94	card-detect-delay = <200>;
	95	samsung,dw-mshc-ciu-div = <3>;
	96	samsung,dw-mshc-sdr-timing = <2 3>;
	97	samsung,dw-mshc-ddr-timing = <1 2>;
aaa25a5a JC	98	bus-width = <8>;
aaa25a5a JC	99	cap-mmc-highspeed;
ec601ff3 MS	100	};
	101
	102	watchdog@10060000 {
	103	status = "okay";
	104	};
	105
	106	rtc@10070000 {
	107	status = "okay";
	108	};
	109
	110	g2d@10800000 {
	111	status = "okay";
	112	};
	113
	114	camera {
	115	status = "okay";
	116	pinctrl-names = "default";
	117	pinctrl-0 = <>;
	118
	119	fimc_0: fimc@11800000 {
	120	status = "okay";
0357a443 SN	121	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
	122	<&clock CLK_SCLK_FIMC0>;
	123	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	124	assigned-clock-rates = <0>, <176000000>;
ec601ff3 MS	125	};
	126
	127	fimc_1: fimc@11810000 {
	128	status = "okay";
0357a443 SN	129	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
	130	<&clock CLK_SCLK_FIMC1>;
	131	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	132	assigned-clock-rates = <0>, <176000000>;
ec601ff3 MS	133	};
	134
	135	fimc_2: fimc@11820000 {
	136	status = "okay";
0357a443 SN	137	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
	138	<&clock CLK_SCLK_FIMC2>;
	139	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	140	assigned-clock-rates = <0>, <176000000>;
ec601ff3 MS	141	};
	142
	143	fimc_3: fimc@11830000 {
	144	status = "okay";
0357a443 SN	145	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
	146	<&clock CLK_SCLK_FIMC3>;
	147	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
	148	assigned-clock-rates = <0>, <176000000>;
ec601ff3 MS	149	};
	150	};
	151
	152	sdhci@12530000 {
	153	bus-width = <4>;
	154	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
	155	pinctrl-names = "default";
	156	vmmc-supply = <&ldo4_reg &ldo21_reg>;
78f54db1 MS	157	cd-gpios = <&gpk2 2 0>;
78f54db1 MS	158	cd-inverted;
ec601ff3 MS	159	status = "okay";
	160	};
	161
	162	serial@13800000 {
	163	status = "okay";
	164	};
	165
	166	serial@13810000 {
	167	status = "okay";
	168	};
	169
	170	fixed-rate-clocks {
	171	xxti {
	172	compatible = "samsung,clock-xxti";
	173	clock-frequency = <0>;
	174	};
	175
	176	xusbxti {
	177	compatible = "samsung,clock-xusbxti";
	178	clock-frequency = <24000000>;
	179	};
	180	};
	181
	182	i2c@13860000 {
	183	pinctrl-0 = <&i2c0_bus>;
	184	pinctrl-names = "default";
cc3fe7ab DD	185	samsung,i2c-sda-delay = <100>;
cc3fe7ab DD	186	samsung,i2c-max-bus-freq = <400000>;
ec601ff3 MS	187	status = "okay";
	188
	189	usb3503: usb3503@08 {
	190	compatible = "smsc,usb3503";
	191	reg = <0x08>;
	192
	193	intn-gpios = <&gpx3 0 0>;
	194	connect-gpios = <&gpx3 4 0>;
	195	reset-gpios = <&gpx3 5 0>;
	196	initial-mode = <1>;
	197	};
	198
	199	max77686: pmic@09 {
	200	compatible = "maxim,max77686";
eea6653a DD	201	interrupt-parent = <&gpx3>;
	202	interrupts = <2 0>;
	203	pinctrl-names = "default";
	204	pinctrl-0 = <&max77686_irq>;
ec601ff3 MS	205	reg = <0x09>;
	206	#clock-cells = <1>;
	207
	208	voltage-regulators {
	209	ldo1_reg: LDO1 {
	210	regulator-name = "VDD_ALIVE_1.0V";
	211	regulator-min-microvolt = <1000000>;
	212	regulator-max-microvolt = <1000000>;
	213	regulator-always-on;
	214	};
	215
	216	ldo2_reg: LDO2 {
	217	regulator-name = "VDDQ_M1_2_1.8V";
	218	regulator-min-microvolt = <1800000>;
	219	regulator-max-microvolt = <1800000>;
	220	regulator-always-on;
	221	};
	222
	223	ldo3_reg: LDO3 {
	224	regulator-name = "VDDQ_EXT_1.8V";
	225	regulator-min-microvolt = <1800000>;
	226	regulator-max-microvolt = <1800000>;
	227	regulator-always-on;
	228	};
	229
	230	ldo4_reg: LDO4 {
	231	regulator-name = "VDDQ_MMC2_2.8V";
	232	regulator-min-microvolt = <2800000>;
	233	regulator-max-microvolt = <2800000>;
	234	regulator-always-on;
	235	regulator-boot-on;
	236	};
	237
	238	ldo5_reg: LDO5 {
	239	regulator-name = "VDDQ_MMC1_3_1.8V";
	240	regulator-min-microvolt = <1800000>;
	241	regulator-max-microvolt = <1800000>;
	242	regulator-always-on;
	243	regulator-boot-on;
	244	};
	245
	246	ldo6_reg: LDO6 {
	247	regulator-name = "VDD10_MPLL_1.0V";
	248	regulator-min-microvolt = <1000000>;
	249	regulator-max-microvolt = <1000000>;
	250	regulator-always-on;
	251	};
	252
	253	ldo7_reg: LDO7 {
	254	regulator-name = "VDD10_XPLL_1.0V";
	255	regulator-min-microvolt = <1000000>;
	256	regulator-max-microvolt = <1000000>;
	257	regulator-always-on;
	258	};
	259
2561658b MS	260	ldo8_reg: ldo@8 {
	261	regulator-compatible = "LDO8";
	262	regulator-name = "VDD10_HDMI_1.0V";
	263	regulator-min-microvolt = <1000000>;
	264	regulator-max-microvolt = <1000000>;
	265	};
	266
	267	ldo10_reg: ldo@10 {
	268	regulator-compatible = "LDO10";
	269	regulator-name = "VDDQ_MIPIHSI_1.8V";
a59acc17 LM	270	regulator-min-microvolt = <1800000>;
a59acc17 LM	271	regulator-max-microvolt = <1800000>;
a59acc17 LM	272	};
a59acc17 LM	273
ec601ff3 MS	274	ldo11_reg: LDO11 {
	275	regulator-name = "VDD18_ABB1_1.8V";
	276	regulator-min-microvolt = <1800000>;
	277	regulator-max-microvolt = <1800000>;
	278	regulator-always-on;
	279	};
	280
	281	ldo12_reg: LDO12 {
	282	regulator-name = "VDD33_USB_3.3V";
	283	regulator-min-microvolt = <3300000>;
	284	regulator-max-microvolt = <3300000>;
	285	regulator-always-on;
	286	regulator-boot-on;
	287	};
	288
	289	ldo13_reg: LDO13 {
	290	regulator-name = "VDDQ_C2C_W_1.8V";
	291	regulator-min-microvolt = <1800000>;
	292	regulator-max-microvolt = <1800000>;
	293	regulator-always-on;
	294	regulator-boot-on;
	295	};
	296
	297	ldo14_reg: LDO14 {
	298	regulator-name = "VDD18_ABB0_2_1.8V";
	299	regulator-min-microvolt = <1800000>;
	300	regulator-max-microvolt = <1800000>;
	301	regulator-always-on;
	302	regulator-boot-on;
	303	};
	304
	305	ldo15_reg: LDO15 {
	306	regulator-name = "VDD10_HSIC_1.0V";
	307	regulator-min-microvolt = <1000000>;
	308	regulator-max-microvolt = <1000000>;
	309	regulator-always-on;
	310	regulator-boot-on;
	311	};
	312
	313	ldo16_reg: LDO16 {
	314	regulator-name = "VDD18_HSIC_1.8V";
	315	regulator-min-microvolt = <1800000>;
	316	regulator-max-microvolt = <1800000>;
	317	regulator-always-on;
	318	regulator-boot-on;
	319	};
	320
	321	ldo20_reg: LDO20 {
	322	regulator-name = "LDO20_1.8V";
	323	regulator-min-microvolt = <1800000>;
	324	regulator-max-microvolt = <1800000>;
	325	regulator-boot-on;
	326	};
	327
	328	ldo21_reg: LDO21 {
	329	regulator-name = "LDO21_3.3V";
	330	regulator-min-microvolt = <3300000>;
	331	regulator-max-microvolt = <3300000>;
	332	regulator-always-on;
	333	regulator-boot-on;
	334	};
	335
	336	ldo25_reg: LDO25 {
	337	regulator-name = "VDDQ_LCD_1.8V";
338	regulator-min-microvolt = <1800000>;
339	regulator-max-microvolt = <1800000>;
340	regulator-always-on;
341	regulator-boot-on;
342	};
343
344	buck1_reg: BUCK1 {
345	regulator-name = "vdd_mif";
346	regulator-min-microvolt = <1000000>;
347	regulator-max-microvolt = <1000000>;
348	regulator-always-on;
349	regulator-boot-on;
350	};
351
352	buck2_reg: BUCK2 {
353	regulator-name = "vdd_arm";
354	regulator-min-microvolt = <900000>;
355	regulator-max-microvolt = <1350000>;
356	regulator-always-on;
357	regulator-boot-on;
358	};
359
360	buck3_reg: BUCK3 {
361	regulator-name = "vdd_int";
362	regulator-min-microvolt = <1000000>;
363	regulator-max-microvolt = <1000000>;
364	regulator-always-on;
365	regulator-boot-on;
366	};
367
368	buck4_reg: BUCK4 {
369	regulator-name = "vdd_g3d";
370	regulator-min-microvolt = <900000>;
371	regulator-max-microvolt = <1100000>;
372	regulator-microvolt-offset = <50000>;
373	};
374
375	buck5_reg: BUCK5 {
376	regulator-name = "VDDQ_CKEM1_2_1.2V";
377	regulator-min-microvolt = <1200000>;
378	regulator-max-microvolt = <1200000>;
379	regulator-always-on;
380	regulator-boot-on;
381	};
382
383	buck6_reg: BUCK6 {
384	regulator-name = "BUCK6_1.35V";
385	regulator-min-microvolt = <1350000>;
386	regulator-max-microvolt = <1350000>;
387	regulator-always-on;
388	regulator-boot-on;
389	};
390
391	buck7_reg: BUCK7 {
392	regulator-name = "BUCK7_2.0V";
393	regulator-min-microvolt = <2000000>;
394	regulator-max-microvolt = <2000000>;
395	regulator-always-on;
396	};
397
398	buck8_reg: BUCK8 {
399	regulator-name = "BUCK8_2.8V";
400	regulator-min-microvolt = <2800000>;
401	regulator-max-microvolt = <2800000>;
ec601ff3 MS	402	};
	403	};
	404	};
	405	};
	406
5a852743 SN	407	i2c@13870000 {
	408	pinctrl-names = "default";
	409	pinctrl-0 = <&i2c1_bus>;
	410	status = "okay";
	411	max98090: max98090@10 {
	412	compatible = "maxim,max98090";
	413	reg = <0x10>;
	414	interrupt-parent = <&gpx0>;
	415	interrupts = <0 0>;
3635acef SN	416	clocks = <&i2s0 CLK_I2S_CDCLK>;
3635acef SN	417	clock-names = "mclk";
16696337	418	#sound-dai-cells = <0>;
5a852743 SN	419	};
	420	};
	421
ec601ff3 MS	422	exynos-usbphy@125B0000 {
	423	status = "okay";
	424	};
	425
	426	hsotg@12480000 {
32f144f2	427	dr_mode = "peripheral";
ec601ff3 MS	428	status = "okay";
	429	vusb_d-supply = <&ldo15_reg>;
	430	vusb_a-supply = <&ldo12_reg>;
	431	};
	432
	433	ehci: ehci@12580000 {
	434	status = "okay";
	435	};
233e274a LM	436
	437	tmu@100C0000 {
	438	vtmu-supply = <&ldo10_reg>;
	439	status = "okay";
	440	};
bf4a0bed LM	441
	442	thermal-zones {
	443	cpu_thermal: cpu-thermal {
	444	cooling-maps {
	445	map0 {
	446	/* Corresponds to 800MHz at freq_table */
	447	cooling-device = <&cpu0 7 7>;
	448	};
	449	map1 {
	450	/* Corresponds to 200MHz at freq_table */
	451	cooling-device = <&cpu0 13 13>;
	452	};
	453	};
	454	};
	455	};
2561658b MS	456
	457	mixer: mixer@12C10000 {
	458	status = "okay";
	459	};
	460
	461	hdmi@12D00000 {
	462	hpd-gpio = <&gpx3 7 0>;
	463	pinctrl-names = "default";
	464	pinctrl-0 = <&hdmi_hpd>;
	465	vdd-supply = <&ldo8_reg>;
	466	vdd_osc-supply = <&ldo10_reg>;
	467	vdd_pll-supply = <&ldo8_reg>;
	468	ddc = <&hdmi_ddc>;
	469	status = "okay";
	470	};
	471
	472	hdmi_ddc: i2c@13880000 {
	473	status = "okay";
	474	pinctrl-names = "default";
	475	pinctrl-0 = <&i2c2_bus>;
	476	};
	477
	478	i2c@138E0000 {
	479	status = "okay";
	480	};
ec601ff3	481	};
081a15e3	482
225da7e6 MS	483	/* RSTN signal for eMMC */
	484	&sd1_cd {
	485	samsung,pin-pud = <0>;
	486	samsung,pin-drv = <0>;
	487	};
	488
081a15e3 MS	489	&pinctrl_1 {
	490	gpio_power_key: power_key {
	491	samsung,pins = "gpx1-3";
	492	samsung,pin-pud = <0>;
	493	};
eea6653a DD	494
	495	max77686_irq: max77686-irq {
	496	samsung,pins = "gpx3-2";
	497	samsung,pin-function = <0>;
	498	samsung,pin-pud = <0>;
	499	samsung,pin-drv = <0>;
	500	};
2561658b MS	501
	502	hdmi_hpd: hdmi-hpd {
	503	samsung,pins = "gpx3-7";
	504	samsung,pin-pud = <1>;
	505	};
081a15e3	506	};