Commit | Line | Data |
---|---|---|
e88d5ae6 G |
1 | /* |
2 | * Samsung's Exynos5250 based Arndale board device tree source | |
3 | * | |
4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
3799279f | 13 | #include "exynos5250.dtsi" |
d40f3149 | 14 | #include <dt-bindings/interrupt-controller/irq.h> |
e88d5ae6 G |
15 | |
16 | / { | |
17 | model = "Insignal Arndale evaluation board based on EXYNOS5250"; | |
8bdb31b4 | 18 | compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; |
e88d5ae6 G |
19 | |
20 | memory { | |
21 | reg = <0x40000000 0x80000000>; | |
22 | }; | |
23 | ||
24 | chosen { | |
25 | bootargs = "console=ttySAC2,115200"; | |
26 | }; | |
27 | ||
65cedf0e SK |
28 | rtc@101E0000 { |
29 | status = "okay"; | |
30 | }; | |
31 | ||
d96a400f SK |
32 | codec@11000000 { |
33 | samsung,mfc-r = <0x43000000 0x800000>; | |
34 | samsung,mfc-l = <0x51000000 0x800000>; | |
35 | }; | |
36 | ||
e88d5ae6 | 37 | i2c@12C60000 { |
1f518196 ADK |
38 | samsung,i2c-sda-delay = <100>; |
39 | samsung,i2c-max-bus-freq = <20000>; | |
40 | samsung,i2c-slave-addr = <0x66>; | |
6ad8ebff | 41 | status = "okay"; |
1f518196 ADK |
42 | |
43 | s5m8767_pmic@66 { | |
44 | compatible = "samsung,s5m8767-pmic"; | |
45 | reg = <0x66>; | |
d40f3149 MB |
46 | interrupt-parent = <&gpx3>; |
47 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; | |
1f518196 | 48 | |
c1f2d53f MB |
49 | vinb1-supply = <&main_dc_reg>; |
50 | vinb2-supply = <&main_dc_reg>; | |
51 | vinb3-supply = <&main_dc_reg>; | |
52 | vinb4-supply = <&main_dc_reg>; | |
53 | vinb5-supply = <&main_dc_reg>; | |
54 | vinb6-supply = <&main_dc_reg>; | |
55 | vinb7-supply = <&main_dc_reg>; | |
56 | vinb8-supply = <&main_dc_reg>; | |
57 | vinb9-supply = <&main_dc_reg>; | |
58 | ||
59 | vinl1-supply = <&buck7_reg>; | |
60 | vinl2-supply = <&buck7_reg>; | |
61 | vinl3-supply = <&buck7_reg>; | |
62 | vinl4-supply = <&main_dc_reg>; | |
63 | vinl5-supply = <&main_dc_reg>; | |
64 | vinl6-supply = <&main_dc_reg>; | |
65 | vinl7-supply = <&main_dc_reg>; | |
66 | vinl8-supply = <&buck8_reg>; | |
67 | vinl9-supply = <&buck8_reg>; | |
68 | ||
1f518196 ADK |
69 | s5m8767,pmic-buck2-dvs-voltage = <1300000>; |
70 | s5m8767,pmic-buck3-dvs-voltage = <1100000>; | |
71 | s5m8767,pmic-buck4-dvs-voltage = <1200000>; | |
72 | s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, | |
73 | <&gpd1 1 0>, | |
74 | <&gpd1 2 0>; | |
75 | s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, | |
76 | <&gpx2 4 0>, | |
77 | <&gpx2 5 0>; | |
78 | regulators { | |
79 | ldo1_reg: LDO1 { | |
80 | regulator-name = "VDD_ALIVE_1.0V"; | |
81 | regulator-min-microvolt = <1100000>; | |
82 | regulator-max-microvolt = <1100000>; | |
83 | regulator-always-on; | |
84 | regulator-boot-on; | |
85 | op_mode = <1>; | |
86 | }; | |
87 | ||
88 | ldo2_reg: LDO2 { | |
89 | regulator-name = "VDD_28IO_DP_1.35V"; | |
90 | regulator-min-microvolt = <1200000>; | |
91 | regulator-max-microvolt = <1200000>; | |
92 | regulator-always-on; | |
93 | regulator-boot-on; | |
94 | op_mode = <1>; | |
95 | }; | |
96 | ||
97 | ldo3_reg: LDO3 { | |
98 | regulator-name = "VDD_COMMON1_1.8V"; | |
99 | regulator-min-microvolt = <1800000>; | |
100 | regulator-max-microvolt = <1800000>; | |
101 | regulator-always-on; | |
102 | regulator-boot-on; | |
103 | op_mode = <1>; | |
104 | }; | |
105 | ||
106 | ldo4_reg: LDO4 { | |
107 | regulator-name = "VDD_IOPERI_1.8V"; | |
108 | regulator-min-microvolt = <1800000>; | |
109 | regulator-max-microvolt = <1800000>; | |
110 | op_mode = <1>; | |
111 | }; | |
112 | ||
113 | ldo5_reg: LDO5 { | |
114 | regulator-name = "VDD_EXT_1.8V"; | |
115 | regulator-min-microvolt = <1800000>; | |
116 | regulator-max-microvolt = <1800000>; | |
117 | regulator-always-on; | |
118 | regulator-boot-on; | |
119 | op_mode = <1>; | |
120 | }; | |
121 | ||
122 | ldo6_reg: LDO6 { | |
123 | regulator-name = "VDD_MPLL_1.1V"; | |
124 | regulator-min-microvolt = <1100000>; | |
125 | regulator-max-microvolt = <1100000>; | |
126 | regulator-always-on; | |
127 | regulator-boot-on; | |
128 | op_mode = <1>; | |
129 | }; | |
130 | ||
131 | ldo7_reg: LDO7 { | |
132 | regulator-name = "VDD_XPLL_1.1V"; | |
133 | regulator-min-microvolt = <1100000>; | |
134 | regulator-max-microvolt = <1100000>; | |
135 | regulator-always-on; | |
136 | regulator-boot-on; | |
137 | op_mode = <1>; | |
138 | }; | |
139 | ||
140 | ldo8_reg: LDO8 { | |
141 | regulator-name = "VDD_COMMON2_1.0V"; | |
142 | regulator-min-microvolt = <1000000>; | |
143 | regulator-max-microvolt = <1000000>; | |
144 | regulator-always-on; | |
145 | regulator-boot-on; | |
146 | op_mode = <1>; | |
147 | }; | |
148 | ||
149 | ldo9_reg: LDO9 { | |
150 | regulator-name = "VDD_33ON_3.0V"; | |
151 | regulator-min-microvolt = <3000000>; | |
152 | regulator-max-microvolt = <3000000>; | |
153 | op_mode = <1>; | |
154 | }; | |
155 | ||
156 | ldo10_reg: LDO10 { | |
157 | regulator-name = "VDD_COMMON3_1.8V"; | |
158 | regulator-min-microvolt = <1800000>; | |
159 | regulator-max-microvolt = <1800000>; | |
160 | regulator-always-on; | |
161 | regulator-boot-on; | |
162 | op_mode = <1>; | |
163 | }; | |
164 | ||
165 | ldo11_reg: LDO11 { | |
166 | regulator-name = "VDD_ABB2_1.8V"; | |
167 | regulator-min-microvolt = <1800000>; | |
168 | regulator-max-microvolt = <1800000>; | |
169 | regulator-always-on; | |
170 | regulator-boot-on; | |
171 | op_mode = <1>; | |
172 | }; | |
173 | ||
174 | ldo12_reg: LDO12 { | |
175 | regulator-name = "VDD_USB_3.0V"; | |
176 | regulator-min-microvolt = <3000000>; | |
177 | regulator-max-microvolt = <3000000>; | |
178 | regulator-always-on; | |
179 | regulator-boot-on; | |
180 | op_mode = <1>; | |
181 | }; | |
182 | ||
183 | ldo13_reg: LDO13 { | |
184 | regulator-name = "VDDQ_C2C_W_1.8V"; | |
185 | regulator-min-microvolt = <1800000>; | |
186 | regulator-max-microvolt = <1800000>; | |
187 | regulator-always-on; | |
188 | regulator-boot-on; | |
189 | op_mode = <1>; | |
190 | }; | |
191 | ||
192 | ldo14_reg: LDO14 { | |
193 | regulator-name = "VDD18_ABB0_3_1.8V"; | |
194 | regulator-min-microvolt = <1800000>; | |
195 | regulator-max-microvolt = <1800000>; | |
196 | regulator-always-on; | |
197 | regulator-boot-on; | |
198 | op_mode = <1>; | |
199 | }; | |
200 | ||
201 | ldo15_reg: LDO15 { | |
202 | regulator-name = "VDD10_COMMON4_1.0V"; | |
203 | regulator-min-microvolt = <1000000>; | |
204 | regulator-max-microvolt = <1000000>; | |
205 | regulator-always-on; | |
206 | regulator-boot-on; | |
207 | op_mode = <1>; | |
208 | }; | |
209 | ||
210 | ldo16_reg: LDO16 { | |
211 | regulator-name = "VDD18_HSIC_1.8V"; | |
212 | regulator-min-microvolt = <1800000>; | |
213 | regulator-max-microvolt = <1800000>; | |
214 | regulator-always-on; | |
215 | regulator-boot-on; | |
216 | op_mode = <1>; | |
217 | }; | |
218 | ||
219 | ldo17_reg: LDO17 { | |
220 | regulator-name = "VDDQ_MMC2_3_2.8V"; | |
221 | regulator-min-microvolt = <2800000>; | |
222 | regulator-max-microvolt = <2800000>; | |
223 | regulator-always-on; | |
224 | regulator-boot-on; | |
225 | op_mode = <1>; | |
226 | }; | |
227 | ||
228 | ldo18_reg: LDO18 { | |
229 | regulator-name = "VDD_33ON_2.8V"; | |
230 | regulator-min-microvolt = <2800000>; | |
231 | regulator-max-microvolt = <2800000>; | |
232 | op_mode = <1>; | |
233 | }; | |
234 | ||
235 | ldo22_reg: LDO22 { | |
236 | regulator-name = "EXT_33_OFF"; | |
237 | regulator-min-microvolt = <3300000>; | |
238 | regulator-max-microvolt = <3300000>; | |
239 | op_mode = <1>; | |
240 | }; | |
241 | ||
242 | ldo23_reg: LDO23 { | |
243 | regulator-name = "EXT_28_OFF"; | |
244 | regulator-min-microvolt = <2800000>; | |
245 | regulator-max-microvolt = <2800000>; | |
246 | op_mode = <1>; | |
247 | }; | |
248 | ||
249 | ldo25_reg: LDO25 { | |
250 | regulator-name = "PVDD_LDO25"; | |
251 | regulator-min-microvolt = <1200000>; | |
252 | regulator-max-microvolt = <1200000>; | |
253 | op_mode = <1>; | |
254 | }; | |
255 | ||
256 | ldo26_reg: LDO26 { | |
257 | regulator-name = "EXT_18_OFF"; | |
258 | regulator-min-microvolt = <1800000>; | |
259 | regulator-max-microvolt = <1800000>; | |
260 | op_mode = <1>; | |
261 | }; | |
262 | ||
263 | buck1_reg: BUCK1 { | |
264 | regulator-name = "vdd_mif"; | |
265 | regulator-min-microvolt = <950000>; | |
266 | regulator-max-microvolt = <1200000>; | |
267 | regulator-always-on; | |
268 | regulator-boot-on; | |
269 | op_mode = <1>; | |
270 | }; | |
271 | ||
272 | buck2_reg: BUCK2 { | |
273 | regulator-name = "vdd_arm"; | |
bb28205a | 274 | regulator-min-microvolt = <912500>; |
1f518196 ADK |
275 | regulator-max-microvolt = <1300000>; |
276 | regulator-always-on; | |
277 | regulator-boot-on; | |
278 | op_mode = <1>; | |
279 | }; | |
280 | ||
281 | buck3_reg: BUCK3 { | |
282 | regulator-name = "vdd_int"; | |
283 | regulator-min-microvolt = <900000>; | |
284 | regulator-max-microvolt = <1200000>; | |
285 | regulator-always-on; | |
286 | regulator-boot-on; | |
287 | op_mode = <1>; | |
288 | }; | |
289 | ||
290 | buck4_reg: BUCK4 { | |
291 | regulator-name = "vdd_g3d"; | |
292 | regulator-min-microvolt = <1000000>; | |
293 | regulator-max-microvolt = <1000000>; | |
bfeda827 | 294 | regulator-always-on; |
1f518196 ADK |
295 | regulator-boot-on; |
296 | op_mode = <1>; | |
297 | }; | |
298 | ||
299 | buck5_reg: BUCK5 { | |
300 | regulator-name = "VDD_MEM_1.35V"; | |
301 | regulator-min-microvolt = <750000>; | |
302 | regulator-max-microvolt = <1355000>; | |
303 | regulator-always-on; | |
304 | regulator-boot-on; | |
305 | op_mode = <1>; | |
306 | }; | |
307 | ||
c1f2d53f MB |
308 | buck7_reg: BUCK7 { |
309 | regulator-name = "PVDD_BUCK7"; | |
310 | regulator-always-on; | |
05118a8e | 311 | op_mode = <1>; |
c1f2d53f MB |
312 | }; |
313 | ||
314 | buck8_reg: BUCK8 { | |
315 | regulator-name = "PVDD_BUCK8"; | |
316 | regulator-always-on; | |
05118a8e | 317 | op_mode = <1>; |
c1f2d53f MB |
318 | }; |
319 | ||
1f518196 ADK |
320 | buck9_reg: BUCK9 { |
321 | regulator-name = "VDD_33_OFF_EXT1"; | |
322 | regulator-min-microvolt = <750000>; | |
323 | regulator-max-microvolt = <3000000>; | |
324 | op_mode = <1>; | |
325 | }; | |
326 | }; | |
327 | }; | |
e88d5ae6 G |
328 | }; |
329 | ||
e88d5ae6 | 330 | i2c@12C80000 { |
6ad8ebff MB |
331 | status = "okay"; |
332 | ||
93457b9c SK |
333 | samsung,i2c-sda-delay = <100>; |
334 | samsung,i2c-max-bus-freq = <66000>; | |
335 | samsung,i2c-slave-addr = <0x50>; | |
336 | ||
337 | hdmiddc@50 { | |
338 | compatible = "samsung,exynos4210-hdmiddc"; | |
339 | reg = <0x50>; | |
340 | }; | |
e88d5ae6 G |
341 | }; |
342 | ||
343 | i2c@12C90000 { | |
6ad8ebff MB |
344 | status = "okay"; |
345 | ||
21274841 | 346 | wm1811a@1a { |
6ad8ebff | 347 | |
21274841 MB |
348 | compatible = "wlf,wm1811"; |
349 | reg = <0x1a>; | |
350 | ||
351 | AVDD2-supply = <&main_dc_reg>; | |
352 | CPVDD-supply = <&main_dc_reg>; | |
353 | DBVDD1-supply = <&main_dc_reg>; | |
354 | DBVDD2-supply = <&main_dc_reg>; | |
355 | DBVDD3-supply = <&main_dc_reg>; | |
356 | LDO1VDD-supply = <&main_dc_reg>; | |
357 | SPKVDD1-supply = <&main_dc_reg>; | |
358 | SPKVDD2-supply = <&main_dc_reg>; | |
359 | ||
360 | wlf,ldo1ena = <&gpb0 0 0>; | |
361 | wlf,ldo2ena = <&gpb0 1 0>; | |
362 | }; | |
e88d5ae6 G |
363 | }; |
364 | ||
93457b9c | 365 | i2c@12CE0000 { |
6ad8ebff MB |
366 | status = "okay"; |
367 | ||
93457b9c SK |
368 | samsung,i2c-sda-delay = <100>; |
369 | samsung,i2c-max-bus-freq = <66000>; | |
370 | samsung,i2c-slave-addr = <0x38>; | |
371 | ||
372 | hdmiphy@38 { | |
373 | compatible = "samsung,exynos4212-hdmiphy"; | |
374 | reg = <0x38>; | |
375 | }; | |
376 | }; | |
377 | ||
ba0d7ed3 YK |
378 | i2c@121D0000 { |
379 | status = "okay"; | |
380 | samsung,i2c-sda-delay = <100>; | |
381 | samsung,i2c-max-bus-freq = <40000>; | |
382 | samsung,i2c-slave-addr = <0x38>; | |
383 | ||
384 | sata_phy_i2c:sata-phy@38 { | |
385 | compatible = "samsung,exynos-sataphy-i2c"; | |
386 | reg = <0x38>; | |
387 | }; | |
388 | }; | |
389 | ||
390 | sata@122F0000 { | |
391 | status = "okay"; | |
392 | }; | |
393 | ||
394 | sata-phy@12170000 { | |
395 | status = "okay"; | |
396 | samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; | |
397 | }; | |
398 | ||
c8149df0 | 399 | mmc_0: mmc@12200000 { |
e908d5c5 | 400 | status = "okay"; |
e88d5ae6 G |
401 | num-slots = <1>; |
402 | supports-highspeed; | |
403 | broken-cd; | |
e88d5ae6 G |
404 | card-detect-delay = <200>; |
405 | samsung,dw-mshc-ciu-div = <3>; | |
406 | samsung,dw-mshc-sdr-timing = <2 3>; | |
407 | samsung,dw-mshc-ddr-timing = <1 2>; | |
2988103c | 408 | vmmc-supply = <&mmc_reg>; |
d01fc36b TB |
409 | pinctrl-names = "default"; |
410 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; | |
e88d5ae6 G |
411 | |
412 | slot@0 { | |
413 | reg = <0>; | |
414 | bus-width = <8>; | |
e88d5ae6 G |
415 | }; |
416 | }; | |
417 | ||
c8149df0 | 418 | mmc_2: mmc@12220000 { |
e908d5c5 | 419 | status = "okay"; |
e88d5ae6 G |
420 | num-slots = <1>; |
421 | supports-highspeed; | |
e88d5ae6 G |
422 | card-detect-delay = <200>; |
423 | samsung,dw-mshc-ciu-div = <3>; | |
424 | samsung,dw-mshc-sdr-timing = <2 3>; | |
425 | samsung,dw-mshc-ddr-timing = <1 2>; | |
2988103c | 426 | vmmc-supply = <&mmc_reg>; |
d01fc36b TB |
427 | pinctrl-names = "default"; |
428 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; | |
e88d5ae6 G |
429 | |
430 | slot@0 { | |
431 | reg = <0>; | |
432 | bus-width = <4>; | |
6a446172 | 433 | disable-wp; |
e88d5ae6 G |
434 | }; |
435 | }; | |
436 | ||
328aee4b MB |
437 | i2s0: i2s@03830000 { |
438 | status = "okay"; | |
439 | }; | |
440 | ||
89fec22d TB |
441 | gpio_keys { |
442 | compatible = "gpio-keys"; | |
443 | ||
444 | menu { | |
445 | label = "SW-TACT2"; | |
446 | gpios = <&gpx1 4 1>; | |
447 | linux,code = <139>; | |
448 | gpio-key,wakeup; | |
449 | }; | |
450 | ||
451 | home { | |
452 | label = "SW-TACT3"; | |
453 | gpios = <&gpx1 5 1>; | |
454 | linux,code = <102>; | |
455 | gpio-key,wakeup; | |
456 | }; | |
457 | ||
458 | up { | |
459 | label = "SW-TACT4"; | |
460 | gpios = <&gpx1 6 1>; | |
461 | linux,code = <103>; | |
462 | gpio-key,wakeup; | |
463 | }; | |
464 | ||
465 | down { | |
466 | label = "SW-TACT5"; | |
467 | gpios = <&gpx1 7 1>; | |
468 | linux,code = <108>; | |
469 | gpio-key,wakeup; | |
470 | }; | |
471 | ||
472 | back { | |
473 | label = "SW-TACT6"; | |
474 | gpios = <&gpx2 0 1>; | |
475 | linux,code = <158>; | |
476 | gpio-key,wakeup; | |
477 | }; | |
478 | ||
479 | wakeup { | |
480 | label = "SW-TACT7"; | |
481 | gpios = <&gpx2 1 1>; | |
482 | linux,code = <143>; | |
483 | gpio-key,wakeup; | |
484 | }; | |
485 | }; | |
486 | ||
2d2ff61d SK |
487 | hdmi { |
488 | hpd-gpio = <&gpx3 7 2>; | |
489 | vdd_osc-supply = <&ldo10_reg>; | |
490 | vdd_pll-supply = <&ldo8_reg>; | |
491 | vdd-supply = <&ldo8_reg>; | |
492 | }; | |
493 | ||
aa3edb65 MB |
494 | regulators { |
495 | compatible = "simple-bus"; | |
496 | #address-cells = <1>; | |
497 | #size-cells = <0>; | |
498 | ||
8365f763 | 499 | main_dc_reg: regulator@0 { |
c1f2d53f | 500 | compatible = "regulator-fixed"; |
8365f763 | 501 | reg = <0>; |
c1f2d53f MB |
502 | regulator-name = "MAIN_DC"; |
503 | }; | |
504 | ||
8365f763 | 505 | mmc_reg: regulator@1 { |
aa3edb65 | 506 | compatible = "regulator-fixed"; |
8365f763 | 507 | reg = <1>; |
aa3edb65 MB |
508 | regulator-name = "VDD_33ON_2.8V"; |
509 | regulator-min-microvolt = <2800000>; | |
510 | regulator-max-microvolt = <2800000>; | |
511 | gpio = <&gpx1 1 1>; | |
512 | enable-active-high; | |
513 | }; | |
2988103c | 514 | |
8365f763 | 515 | reg_hdmi_en: regulator@2 { |
aa3edb65 | 516 | compatible = "regulator-fixed"; |
8365f763 | 517 | reg = <2>; |
aa3edb65 MB |
518 | regulator-name = "hdmi-en"; |
519 | }; | |
2d2ff61d SK |
520 | }; |
521 | ||
8b6076d4 TA |
522 | fixed-rate-clocks { |
523 | xxti { | |
524 | compatible = "samsung,clock-xxti"; | |
525 | clock-frequency = <24000000>; | |
526 | }; | |
527 | }; | |
a3093e6f | 528 | |
77899d53 | 529 | dp-controller@145B0000 { |
a3093e6f VS |
530 | samsung,color-space = <0>; |
531 | samsung,dynamic-range = <0>; | |
532 | samsung,ycbcr-coeff = <0>; | |
533 | samsung,color-depth = <1>; | |
534 | samsung,link-rate = <0x0a>; | |
535 | samsung,lane-count = <4>; | |
77899d53 | 536 | status = "okay"; |
a3093e6f VS |
537 | }; |
538 | ||
54db6030 | 539 | fimd: fimd@14400000 { |
9ee35a5b | 540 | status = "okay"; |
54db6030 VS |
541 | display-timings { |
542 | native-mode = <&timing0>; | |
543 | timing0: timing@0 { | |
544 | /* 2560x1600 DP panel */ | |
545 | clock-frequency = <50000>; | |
546 | hactive = <2560>; | |
547 | vactive = <1600>; | |
548 | hfront-porch = <48>; | |
549 | hback-porch = <80>; | |
550 | hsync-len = <32>; | |
551 | vback-porch = <16>; | |
552 | vfront-porch = <8>; | |
553 | vsync-len = <6>; | |
554 | }; | |
555 | }; | |
556 | }; | |
557 | ||
7c1b0ec5 MB |
558 | usb_hub_bus { |
559 | compatible = "simple-bus"; | |
560 | #address-cells = <1>; | |
561 | #size-cells = <0>; | |
562 | ||
563 | // SMSC USB3503 connected in hardware only mode as a PHY | |
564 | usb_hub: usb_hub { | |
565 | compatible = "smsc,usb3503a"; | |
566 | ||
567 | reset-gpios = <&gpx3 5 1>; | |
568 | connect-gpios = <&gpd1 7 1>; | |
569 | }; | |
570 | }; | |
15ac8693 MB |
571 | |
572 | usb@12110000 { | |
573 | usb-phy = <&usb2_phy>; | |
574 | }; | |
e88d5ae6 | 575 | }; |