[deliverable/linux.git] / arch / arm / boot / dts / imx28-apx4devkit.dts

/dts-v1/;
/include/ "imx28.dtsi"

/ {
	model = "Bluegiga APX4 Development Kit";
	compatible = "bluegiga,apx4devkit", "fsl,imx28";

	memory {
		reg = <0x40000000 0x04000000>;
	};

	apb@80000000 {
		apbh@80000000 {
			gpmi-nand@8000c000 {
				pinctrl-names = "default";
				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
				status = "okay";
			};

			ssp0: ssp@80010000 {
				compatible = "fsl,imx28-mmc";
				pinctrl-names = "default";
				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
				bus-width = <4>;
				status = "okay";
			};

			ssp2: ssp@80014000 {
				compatible = "fsl,imx28-mmc";
				pinctrl-names = "default";
				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
				bus-width = <4>;
				status = "okay";
			};

			pinctrl@80018000 {
				pinctrl-names = "default";
				pinctrl-0 = <&hog_pins_a>;

				hog_pins_a: hog@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				lcdif_pins_apx4: lcdif-apx4@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
					>;
					fsl,drive-strength = <1>;
					fsl,voltage = <1>;
					fsl,pull-up = <1>;
				};

				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
					fsl,pinmux-ids = <
						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
					>;
					fsl,drive-strength = <2>;
					fsl,pull-up = <0>;
				};
			};

			lcdif@80030000 {
				pinctrl-names = "default";
				pinctrl-0 = <&lcdif_24bit_pins_a
					     &lcdif_pins_apx4>;
				status = "okay";
			};
		};

		apbx@80040000 {
			saif0: saif@80042000 {
				pinctrl-names = "default";
				pinctrl-0 = <&saif0_pins_a>;
				status = "okay";
			};

			saif1: saif@80046000 {
				pinctrl-names = "default";
				pinctrl-0 = <&saif1_pins_a>;
				fsl,saif-master = <&saif0>;
				status = "okay";
			};

			i2c0: i2c@80058000 {
				pinctrl-names = "default";
				pinctrl-0 = <&i2c0_pins_a>;
				status = "okay";

				sgtl5000: codec@0a {
					compatible = "fsl,sgtl5000";
					reg = <0x0a>;
					VDDA-supply = <&reg_3p3v>;
					VDDIO-supply = <&reg_3p3v>;

				};

				pcf8563: rtc@51 {
					compatible = "phg,pcf8563";
					reg = <0x51>;
				};
			};

			duart: serial@80074000 {
				pinctrl-names = "default";
				pinctrl-0 = <&duart_pins_a>;
				status = "okay";
			};

			auart0: serial@8006a000 {
				pinctrl-names = "default";
				pinctrl-0 = <&auart0_pins_a>;
				status = "okay";
			};

			auart1: serial@8006c000 {
				pinctrl-names = "default";
				pinctrl-0 = <&auart1_2pins_a>;
				status = "okay";
			};

			auart2: serial@8006e000 {
				pinctrl-names = "default";
				pinctrl-0 = <&auart2_2pins_a>;
				status = "okay";
			};
		};
	};

	ahb@80080000 {
		mac0: ethernet@800f0000 {
			phy-mode = "rmii";
			pinctrl-names = "default";
			pinctrl-0 = <&mac0_pins_a>;
			status = "okay";
		};
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};
	};

	sound {
		compatible = "bluegiga,apx4devkit-sgtl5000",
			     "fsl,mxs-audio-sgtl5000";
		model = "apx4devkit-sgtl5000";
		saif-controllers = <&saif0 &saif1>;
		audio-codec = <&sgtl5000>;
	};

	leds {
		compatible = "gpio-leds";

		user {
			label = "Heartbeat";
			gpios = <&gpio3 28 0>;
			linux,default-trigger = "heartbeat";
		};
	};
};
Commit	Line	Data
3143bbb4 SG	1	/dts-v1/;
	2	/include/ "imx28.dtsi"
	3
	4	/ {
	5	model = "Bluegiga APX4 Development Kit";
	6	compatible = "bluegiga,apx4devkit", "fsl,imx28";
	7
	8	memory {
	9	reg = <0x40000000 0x04000000>;
	10	};
	11
	12	apb@80000000 {
	13	apbh@80000000 {
3317d99e LH	14	gpmi-nand@8000c000 {
	15	pinctrl-names = "default";
	16	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
	17	status = "okay";
	18	};
	19
3143bbb4 SG	20	ssp0: ssp@80010000 {
	21	compatible = "fsl,imx28-mmc";
	22	pinctrl-names = "default";
1eb73ca0 LH	23	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
1eb73ca0 LH	24	bus-width = <4>;
3143bbb4 SG	25	status = "okay";
	26	};
	27
557763b3 LH	28	ssp2: ssp@80014000 {
	29	compatible = "fsl,imx28-mmc";
	30	pinctrl-names = "default";
	31	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
	32	bus-width = <4>;
	33	status = "okay";
	34	};
	35
3143bbb4 SG	36	pinctrl@80018000 {
	37	pinctrl-names = "default";
	38	pinctrl-0 = <&hog_pins_a>;
	39
e0e35b48	40	hog_pins_a: hog@0 {
3143bbb4 SG	41	reg = <0>;
3143bbb4 SG	42	fsl,pinmux-ids = <
1ad0ceac LH	43	0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
	44	0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
	45	0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
	46	0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
3143bbb4	47	0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
d8bb823d	48	0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
1ad0ceac	49	0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
3143bbb4 SG	50	>;
	51	fsl,drive-strength = <0>;
	52	fsl,voltage = <1>;
	53	fsl,pull-up = <0>;
	54	};
d8bb823d LH	55
	56	lcdif_pins_apx4: lcdif-apx4@0 {
	57	reg = <0>;
	58	fsl,pinmux-ids = <
	59	0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
	60	0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
	61	0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
	62	0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
	63	>;
	64	fsl,drive-strength = <0>;
	65	fsl,voltage = <1>;
	66	fsl,pull-up = <0>;
	67	};
557763b3 LH	68
	69	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
	70	reg = <0>;
	71	fsl,pinmux-ids = <
	72	0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
	73	0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
	74	0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
	75	0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
	76	0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
	77	0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
	78	>;
	79	fsl,drive-strength = <1>;
	80	fsl,voltage = <1>;
	81	fsl,pull-up = <1>;
	82	};
	83
	84	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
	85	fsl,pinmux-ids = <
	86	0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
	87	>;
	88	fsl,drive-strength = <2>;
	89	fsl,pull-up = <0>;
	90	};
d8bb823d LH	91	};
	92
	93	lcdif@80030000 {
	94	pinctrl-names = "default";
	95	pinctrl-0 = <&lcdif_24bit_pins_a
	96	&lcdif_pins_apx4>;
	97	status = "okay";
3143bbb4 SG	98	};
	99	};
	100
	101	apbx@80040000 {
	102	saif0: saif@80042000 {
	103	pinctrl-names = "default";
	104	pinctrl-0 = <&saif0_pins_a>;
	105	status = "okay";
	106	};
	107
	108	saif1: saif@80046000 {
	109	pinctrl-names = "default";
	110	pinctrl-0 = <&saif1_pins_a>;
	111	fsl,saif-master = <&saif0>;
	112	status = "okay";
	113	};
	114
	115	i2c0: i2c@80058000 {
	116	pinctrl-names = "default";
	117	pinctrl-0 = <&i2c0_pins_a>;
	118	status = "okay";
	119
	120	sgtl5000: codec@0a {
	121	compatible = "fsl,sgtl5000";
	122	reg = <0x0a>;
	123	VDDA-supply = <&reg_3p3v>;
	124	VDDIO-supply = <&reg_3p3v>;
	125
	126	};
	127
	128	pcf8563: rtc@51 {
	129	compatible = "phg,pcf8563";
	130	reg = <0x51>;
	131	};
	132	};
	133
	134	duart: serial@80074000 {
	135	pinctrl-names = "default";
	136	pinctrl-0 = <&duart_pins_a>;
	137	status = "okay";
	138	};
	139
	140	auart0: serial@8006a000 {
	141	pinctrl-names = "default";
	142	pinctrl-0 = <&auart0_pins_a>;
	143	status = "okay";
	144	};
	145
	146	auart1: serial@8006c000 {
	147	pinctrl-names = "default";
	148	pinctrl-0 = <&auart1_2pins_a>;
	149	status = "okay";
	150	};
	151
	152	auart2: serial@8006e000 {
	153	pinctrl-names = "default";
	154	pinctrl-0 = <&auart2_2pins_a>;
	155	status = "okay";
	156	};
3143bbb4 SG	157	};
	158	};
	159
	160	ahb@80080000 {
	161	mac0: ethernet@800f0000 {
	162	phy-mode = "rmii";
	163	pinctrl-names = "default";
	164	pinctrl-0 = <&mac0_pins_a>;
	165	status = "okay";
	166	};
	167	};
	168
	169	regulators {
	170	compatible = "simple-bus";
	171
	172	reg_3p3v: 3p3v {
	173	compatible = "regulator-fixed";
	174	regulator-name = "3P3V";
	175	regulator-min-microvolt = <3300000>;
	176	regulator-max-microvolt = <3300000>;
	177	regulator-always-on;
	178	};
	179	};
	180
	181	sound {
	182	compatible = "bluegiga,apx4devkit-sgtl5000",
	183	"fsl,mxs-audio-sgtl5000";
	184	model = "apx4devkit-sgtl5000";
	185	saif-controllers = <&saif0 &saif1>;
	186	audio-codec = <&sgtl5000>;
	187	};
	188
	189	leds {
	190	compatible = "gpio-leds";
	191
	192	user {
	193	label = "Heartbeat";
	194	gpios = <&gpio3 28 0>;
	195	linux,default-trigger = "heartbeat";
	196	};
	197	};
	198	};