projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: mxs: remove iomux driver
[deliverable/linux.git] / arch / arm / boot / dts / imx28-evk.dts
CommitLineData
bc3a59c1
DA		 1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13/include/ "imx28.dtsi"
14
15/ {
16 model = "Freescale i.MX28 Evaluation Kit";
17 compatible = "fsl,imx28-evk", "fsl,imx28";
18
19 memory {
20 reg = <0x40000000 0x08000000>;
21 };
22
23 apb@80000000 {
35d23047 24 apbh@80000000 {
7a8e5149
HS		 25 gpmi-nand@8000c000 {
26 pinctrl-names = "default";
daefb696
SG		 27 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
28 &gpmi_pins_evk>;
7a8e5149
HS		 29 status = "okay";
30 };
31
35d23047
SG		 32 ssp0: ssp@80010000 {
33 compatible = "fsl,imx28-mmc";
34 pinctrl-names = "default";
35 pinctrl-0 = <&mmc0_8bit_pins_a
36 &mmc0_cd_cfg &mmc0_sck_cfg>;
37 bus-width = <8>;
38 wp-gpios = <&gpio2 12 0>;
64edbcdd 39 vmmc-supply = <&reg_vddio_sd0>;
35d23047
SG		 40 status = "okay";
41 };
42
43 ssp1: ssp@80012000 {
44 compatible = "fsl,imx28-mmc";
45 bus-width = <8>;
46 wp-gpios = <&gpio0 28 0>;
35d23047 47 };
d54dbb50
SG		 48
49 pinctrl@80018000 {
50 pinctrl-names = "default";
51 pinctrl-0 = <&hog_pins_a>;
52
53 hog_pins_a: hog-gpios@0 {
54 reg = <0>;
55 fsl,pinmux-ids = <
56 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
57 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
58 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
59 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
60 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
61 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
62 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
5da01270
RZ		 63 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
64 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
daefb696
SG		 65 >;
66 fsl,drive-strength = <0>;
67 fsl,voltage = <1>;
68 fsl,pull-up = <0>;
69 };
70
71 gpmi_pins_evk: gpmi-nand-evk@0 {
72 reg = <0>;
73 fsl,pinmux-ids = <
74 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
75 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
d54dbb50
SG		 76 >;
77 fsl,drive-strength = <0>;
78 fsl,voltage = <1>;
79 fsl,pull-up = <0>;
80 };
3dba2596
SG		 81
82 lcdif_pins_evk: lcdif-evk@0 {
83 reg = <0>;
84 fsl,pinmux-ids = <
85 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
86 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
87 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
88 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
89 >;
90 fsl,drive-strength = <0>;
91 fsl,voltage = <1>;
92 fsl,pull-up = <0>;
93 };
d54dbb50 94 };
a915ee42
SG		 95
96 lcdif@80030000 {
97 pinctrl-names = "default";
3dba2596
SG		 98 pinctrl-0 = <&lcdif_24bit_pins_a
99 &lcdif_pins_evk>;
a915ee42
SG		 100 panel-enable-gpios = <&gpio3 30 0>;
101 status = "okay";
102 };
6ca44acf
SG		 103
104 can0: can@80032000 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&can0_pins_a>;
107 status = "okay";
108 };
109
110 can1: can@80034000 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&can1_pins_a>;
113 status = "okay";
114 };
35d23047
SG		 115 };
116
bc3a59c1 117 apbx@80040000 {
530f1d41
SG		 118 saif0: saif@80042000 {
119 pinctrl-names = "default";
120 pinctrl-0 = <&saif0_pins_a>;
121 status = "okay";
122 };
123
124 saif1: saif@80046000 {
125 pinctrl-names = "default";
126 pinctrl-0 = <&saif1_pins_a>;
127 fsl,saif-master = <&saif0>;
128 status = "okay";
129 };
130
2a96e391
SG		 131 i2c0: i2c@80058000 {
132 pinctrl-names = "default";
133 pinctrl-0 = <&i2c0_pins_a>;
134 status = "okay";
530f1d41
SG		 135
136 sgtl5000: codec@0a {
137 compatible = "fsl,sgtl5000";
138 reg = <0x0a>;
139 VDDA-supply = <&reg_3p3v>;
140 VDDIO-supply = <&reg_3p3v>;
141
142 };
2a96e391
SG		 143 };
144
52f7176b
SG		 145 pwm: pwm@80064000 {
146 pinctrl-names = "default";
147 pinctrl-0 = <&pwm2_pins_a>;
148 status = "okay";
149 };
150
bc3a59c1
DA		 151 duart: serial@80074000 {
152 pinctrl-names = "default";
153 pinctrl-0 = <&duart_pins_a>;
154 status = "okay";
155 };
80d969e4
FE		 156
157 auart0: serial@8006a000 {
158 pinctrl-names = "default";
159 pinctrl-0 = <&auart0_pins_a>;
160 status = "okay";
161 };
162
163 auart3: serial@80070000 {
164 pinctrl-names = "default";
165 pinctrl-0 = <&auart3_pins_a>;
166 status = "okay";
167 };
5da01270
RZ		 168
169 usbphy0: usbphy@8007c000 {
170 status = "okay";
171 };
172
173 usbphy1: usbphy@8007e000 {
174 status = "okay";
175 };
bc3a59c1
DA		 176 };
177 };
178
179 ahb@80080000 {
5da01270
RZ		 180 usb0: usb@80080000 {
181 vbus-supply = <&reg_usb0_vbus>;
182 status = "okay";
183 };
184
185 usb1: usb@80090000 {
186 vbus-supply = <&reg_usb1_vbus>;
187 status = "okay";
188 };
189
bc3a59c1
DA		 190 mac0: ethernet@800f0000 {
191 phy-mode = "rmii";
192 pinctrl-names = "default";
193 pinctrl-0 = <&mac0_pins_a>;
c9987c81
SG		 194 phy-supply = <&reg_fec_3v3>;
195 phy-reset-gpios = <&gpio4 13 0>;
196 phy-reset-duration = <100>;
bc3a59c1
DA		 197 status = "okay";
198 };
199
200 mac1: ethernet@800f4000 {
201 phy-mode = "rmii";
202 pinctrl-names = "default";
203 pinctrl-0 = <&mac1_pins_a>;
204 status = "okay";
205 };
206 };
530f1d41
SG		 207
208 regulators {
209 compatible = "simple-bus";
210
211 reg_3p3v: 3p3v {
212 compatible = "regulator-fixed";
213 regulator-name = "3P3V";
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216 regulator-always-on;
217 };
64edbcdd
SG		 218
219 reg_vddio_sd0: vddio-sd0 {
220 compatible = "regulator-fixed";
221 regulator-name = "vddio-sd0";
222 regulator-min-microvolt = <3300000>;
223 regulator-max-microvolt = <3300000>;
224 gpio = <&gpio3 28 0>;
225 };
c9987c81
SG		 226
227 reg_fec_3v3: fec-3v3 {
228 compatible = "regulator-fixed";
229 regulator-name = "fec-3v3";
230 regulator-min-microvolt = <3300000>;
231 regulator-max-microvolt = <3300000>;
232 gpio = <&gpio2 15 0>;
233 };
5da01270
RZ		 234
235 reg_usb0_vbus: usb0_vbus {
236 compatible = "regulator-fixed";
237 regulator-name = "usb0_vbus";
238 regulator-min-microvolt = <5000000>;
239 regulator-max-microvolt = <5000000>;
240 gpio = <&gpio3 9 0>;
241 enable-active-high;
242 };
243
244 reg_usb1_vbus: usb1_vbus {
245 compatible = "regulator-fixed";
246 regulator-name = "usb1_vbus";
247 regulator-min-microvolt = <5000000>;
248 regulator-max-microvolt = <5000000>;
249 gpio = <&gpio3 8 0>;
250 enable-active-high;
251 };
530f1d41
SG		 252 };
253
254 sound {
255 compatible = "fsl,imx28-evk-sgtl5000",
256 "fsl,mxs-audio-sgtl5000";
257 model = "imx28-evk-sgtl5000";
258 saif-controllers = <&saif0 &saif1>;
259 audio-codec = <&sgtl5000>;
260 };
a600e333
SG		 261
262 leds {
263 compatible = "gpio-leds";
264
265 user {
266 label = "Heartbeat";
267 gpios = <&gpio3 5 0>;
268 linux,default-trigger = "heartbeat";
269 };
270 };
52f7176b
SG		 271
272 backlight {
273 compatible = "pwm-backlight";
274 pwms = <&pwm 2 5000000>;
275 brightness-levels = <0 4 8 16 32 64 128 255>;
276 default-brightness-level = <6>;
277 };
bc3a59c1 278};
Linux kernel - Deliverables
This page took 0.052724 seconds and 5 git commands to generate.