Commit | Line | Data |
---|---|---|
bc3a59c1 DA |
1 | /* |
2 | * Copyright 2012 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
13 | /include/ "imx28.dtsi" | |
14 | ||
15 | / { | |
16 | model = "Freescale i.MX28 Evaluation Kit"; | |
17 | compatible = "fsl,imx28-evk", "fsl,imx28"; | |
18 | ||
19 | memory { | |
20 | reg = <0x40000000 0x08000000>; | |
21 | }; | |
22 | ||
23 | apb@80000000 { | |
35d23047 | 24 | apbh@80000000 { |
7a8e5149 HS |
25 | gpmi-nand@8000c000 { |
26 | pinctrl-names = "default"; | |
daefb696 SG |
27 | pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg |
28 | &gpmi_pins_evk>; | |
7a8e5149 HS |
29 | status = "okay"; |
30 | }; | |
31 | ||
35d23047 SG |
32 | ssp0: ssp@80010000 { |
33 | compatible = "fsl,imx28-mmc"; | |
34 | pinctrl-names = "default"; | |
35 | pinctrl-0 = <&mmc0_8bit_pins_a | |
36 | &mmc0_cd_cfg &mmc0_sck_cfg>; | |
37 | bus-width = <8>; | |
38 | wp-gpios = <&gpio2 12 0>; | |
64edbcdd | 39 | vmmc-supply = <®_vddio_sd0>; |
35d23047 SG |
40 | status = "okay"; |
41 | }; | |
42 | ||
43 | ssp1: ssp@80012000 { | |
44 | compatible = "fsl,imx28-mmc"; | |
45 | bus-width = <8>; | |
46 | wp-gpios = <&gpio0 28 0>; | |
35d23047 | 47 | }; |
d54dbb50 | 48 | |
5decb4b6 FE |
49 | ssp2: ssp@80014000 { |
50 | #address-cells = <1>; | |
51 | #size-cells = <0>; | |
52 | compatible = "fsl,imx28-spi"; | |
53 | pinctrl-names = "default"; | |
54 | pinctrl-0 = <&spi2_pins_a>; | |
55 | status = "okay"; | |
56 | ||
57 | flash: m25p80@0 { | |
58 | #address-cells = <1>; | |
59 | #size-cells = <1>; | |
60 | compatible = "sst,sst25vf016b"; | |
61 | spi-max-frequency = <40000000>; | |
62 | reg = <0>; | |
63 | }; | |
64 | }; | |
65 | ||
d54dbb50 SG |
66 | pinctrl@80018000 { |
67 | pinctrl-names = "default"; | |
68 | pinctrl-0 = <&hog_pins_a>; | |
69 | ||
e0e35b48 | 70 | hog_pins_a: hog@0 { |
d54dbb50 SG |
71 | reg = <0>; |
72 | fsl,pinmux-ids = < | |
73 | 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ | |
74 | 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ | |
75 | 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ | |
76 | 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ | |
77 | 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ | |
78 | 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ | |
5da01270 RZ |
79 | 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ |
80 | 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ | |
daefb696 SG |
81 | >; |
82 | fsl,drive-strength = <0>; | |
83 | fsl,voltage = <1>; | |
84 | fsl,pull-up = <0>; | |
85 | }; | |
86 | ||
30d6e2d5 FE |
87 | led_pin_gpio3_5: led_gpio3_5@0 { |
88 | reg = <0>; | |
89 | fsl,pinmux-ids = < | |
90 | 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ | |
91 | >; | |
92 | fsl,drive-strength = <0>; | |
93 | fsl,voltage = <1>; | |
94 | fsl,pull-up = <0>; | |
95 | }; | |
96 | ||
daefb696 SG |
97 | gpmi_pins_evk: gpmi-nand-evk@0 { |
98 | reg = <0>; | |
99 | fsl,pinmux-ids = < | |
100 | 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ | |
101 | 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ | |
d54dbb50 SG |
102 | >; |
103 | fsl,drive-strength = <0>; | |
104 | fsl,voltage = <1>; | |
105 | fsl,pull-up = <0>; | |
106 | }; | |
3dba2596 SG |
107 | |
108 | lcdif_pins_evk: lcdif-evk@0 { | |
109 | reg = <0>; | |
110 | fsl,pinmux-ids = < | |
111 | 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ | |
112 | 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ | |
113 | 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ | |
114 | 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ | |
115 | >; | |
116 | fsl,drive-strength = <0>; | |
117 | fsl,voltage = <1>; | |
118 | fsl,pull-up = <0>; | |
119 | }; | |
d54dbb50 | 120 | }; |
a915ee42 SG |
121 | |
122 | lcdif@80030000 { | |
123 | pinctrl-names = "default"; | |
3dba2596 SG |
124 | pinctrl-0 = <&lcdif_24bit_pins_a |
125 | &lcdif_pins_evk>; | |
a915ee42 SG |
126 | panel-enable-gpios = <&gpio3 30 0>; |
127 | status = "okay"; | |
128 | }; | |
6ca44acf SG |
129 | |
130 | can0: can@80032000 { | |
131 | pinctrl-names = "default"; | |
132 | pinctrl-0 = <&can0_pins_a>; | |
133 | status = "okay"; | |
134 | }; | |
135 | ||
136 | can1: can@80034000 { | |
137 | pinctrl-names = "default"; | |
138 | pinctrl-0 = <&can1_pins_a>; | |
139 | status = "okay"; | |
140 | }; | |
35d23047 SG |
141 | }; |
142 | ||
bc3a59c1 | 143 | apbx@80040000 { |
530f1d41 SG |
144 | saif0: saif@80042000 { |
145 | pinctrl-names = "default"; | |
146 | pinctrl-0 = <&saif0_pins_a>; | |
147 | status = "okay"; | |
148 | }; | |
149 | ||
150 | saif1: saif@80046000 { | |
151 | pinctrl-names = "default"; | |
152 | pinctrl-0 = <&saif1_pins_a>; | |
153 | fsl,saif-master = <&saif0>; | |
154 | status = "okay"; | |
155 | }; | |
156 | ||
8495a243 FE |
157 | lradc@80050000 { |
158 | status = "okay"; | |
159 | }; | |
160 | ||
2a96e391 SG |
161 | i2c0: i2c@80058000 { |
162 | pinctrl-names = "default"; | |
163 | pinctrl-0 = <&i2c0_pins_a>; | |
164 | status = "okay"; | |
530f1d41 SG |
165 | |
166 | sgtl5000: codec@0a { | |
167 | compatible = "fsl,sgtl5000"; | |
168 | reg = <0x0a>; | |
169 | VDDA-supply = <®_3p3v>; | |
170 | VDDIO-supply = <®_3p3v>; | |
171 | ||
172 | }; | |
fa876cef FE |
173 | |
174 | at24@51 { | |
175 | compatible = "at24,24c32"; | |
176 | pagesize = <32>; | |
177 | reg = <0x51>; | |
178 | }; | |
2a96e391 SG |
179 | }; |
180 | ||
52f7176b SG |
181 | pwm: pwm@80064000 { |
182 | pinctrl-names = "default"; | |
183 | pinctrl-0 = <&pwm2_pins_a>; | |
184 | status = "okay"; | |
185 | }; | |
186 | ||
bc3a59c1 DA |
187 | duart: serial@80074000 { |
188 | pinctrl-names = "default"; | |
189 | pinctrl-0 = <&duart_pins_a>; | |
190 | status = "okay"; | |
191 | }; | |
80d969e4 FE |
192 | |
193 | auart0: serial@8006a000 { | |
194 | pinctrl-names = "default"; | |
195 | pinctrl-0 = <&auart0_pins_a>; | |
196 | status = "okay"; | |
197 | }; | |
198 | ||
199 | auart3: serial@80070000 { | |
200 | pinctrl-names = "default"; | |
201 | pinctrl-0 = <&auart3_pins_a>; | |
202 | status = "okay"; | |
203 | }; | |
5da01270 RZ |
204 | |
205 | usbphy0: usbphy@8007c000 { | |
206 | status = "okay"; | |
207 | }; | |
208 | ||
209 | usbphy1: usbphy@8007e000 { | |
210 | status = "okay"; | |
211 | }; | |
bc3a59c1 DA |
212 | }; |
213 | }; | |
214 | ||
215 | ahb@80080000 { | |
5da01270 RZ |
216 | usb0: usb@80080000 { |
217 | vbus-supply = <®_usb0_vbus>; | |
218 | status = "okay"; | |
219 | }; | |
220 | ||
221 | usb1: usb@80090000 { | |
222 | vbus-supply = <®_usb1_vbus>; | |
223 | status = "okay"; | |
224 | }; | |
225 | ||
bc3a59c1 DA |
226 | mac0: ethernet@800f0000 { |
227 | phy-mode = "rmii"; | |
228 | pinctrl-names = "default"; | |
229 | pinctrl-0 = <&mac0_pins_a>; | |
c9987c81 SG |
230 | phy-supply = <®_fec_3v3>; |
231 | phy-reset-gpios = <&gpio4 13 0>; | |
232 | phy-reset-duration = <100>; | |
bc3a59c1 DA |
233 | status = "okay"; |
234 | }; | |
235 | ||
236 | mac1: ethernet@800f4000 { | |
237 | phy-mode = "rmii"; | |
238 | pinctrl-names = "default"; | |
239 | pinctrl-0 = <&mac1_pins_a>; | |
240 | status = "okay"; | |
241 | }; | |
242 | }; | |
530f1d41 SG |
243 | |
244 | regulators { | |
245 | compatible = "simple-bus"; | |
246 | ||
247 | reg_3p3v: 3p3v { | |
248 | compatible = "regulator-fixed"; | |
249 | regulator-name = "3P3V"; | |
250 | regulator-min-microvolt = <3300000>; | |
251 | regulator-max-microvolt = <3300000>; | |
252 | regulator-always-on; | |
253 | }; | |
64edbcdd SG |
254 | |
255 | reg_vddio_sd0: vddio-sd0 { | |
256 | compatible = "regulator-fixed"; | |
257 | regulator-name = "vddio-sd0"; | |
258 | regulator-min-microvolt = <3300000>; | |
259 | regulator-max-microvolt = <3300000>; | |
260 | gpio = <&gpio3 28 0>; | |
261 | }; | |
c9987c81 SG |
262 | |
263 | reg_fec_3v3: fec-3v3 { | |
264 | compatible = "regulator-fixed"; | |
265 | regulator-name = "fec-3v3"; | |
266 | regulator-min-microvolt = <3300000>; | |
267 | regulator-max-microvolt = <3300000>; | |
268 | gpio = <&gpio2 15 0>; | |
269 | }; | |
5da01270 RZ |
270 | |
271 | reg_usb0_vbus: usb0_vbus { | |
272 | compatible = "regulator-fixed"; | |
273 | regulator-name = "usb0_vbus"; | |
274 | regulator-min-microvolt = <5000000>; | |
275 | regulator-max-microvolt = <5000000>; | |
276 | gpio = <&gpio3 9 0>; | |
277 | enable-active-high; | |
278 | }; | |
279 | ||
280 | reg_usb1_vbus: usb1_vbus { | |
281 | compatible = "regulator-fixed"; | |
282 | regulator-name = "usb1_vbus"; | |
283 | regulator-min-microvolt = <5000000>; | |
284 | regulator-max-microvolt = <5000000>; | |
285 | gpio = <&gpio3 8 0>; | |
286 | enable-active-high; | |
287 | }; | |
530f1d41 SG |
288 | }; |
289 | ||
290 | sound { | |
291 | compatible = "fsl,imx28-evk-sgtl5000", | |
292 | "fsl,mxs-audio-sgtl5000"; | |
293 | model = "imx28-evk-sgtl5000"; | |
294 | saif-controllers = <&saif0 &saif1>; | |
295 | audio-codec = <&sgtl5000>; | |
296 | }; | |
a600e333 SG |
297 | |
298 | leds { | |
299 | compatible = "gpio-leds"; | |
30d6e2d5 FE |
300 | pinctrl-names = "default"; |
301 | pinctrl-0 = <&led_pin_gpio3_5>; | |
a600e333 SG |
302 | |
303 | user { | |
304 | label = "Heartbeat"; | |
305 | gpios = <&gpio3 5 0>; | |
306 | linux,default-trigger = "heartbeat"; | |
307 | }; | |
308 | }; | |
52f7176b SG |
309 | |
310 | backlight { | |
311 | compatible = "pwm-backlight"; | |
312 | pwms = <&pwm 2 5000000>; | |
313 | brightness-levels = <0 4 8 16 32 64 128 255>; | |
314 | default-brightness-level = <6>; | |
315 | }; | |
bc3a59c1 | 316 | }; |