[deliverable/linux.git] / arch / arm / boot / dts / imx35.dtsi

/*
 * Copyright 2012 Steffen Trumtrar, Pengutronix
 *
 * based on imx27.dtsi
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License version 2 as published by the
 * Free Software Foundation.
 */

#include "skeleton.dtsi"
#include "imx35-pinfunc.h"

/ {
	aliases {
		ethernet0 = &fec;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		spi0 = &spi1;
		spi1 = &spi2;
	};

	cpus {
		#address-cells = <0>;
		#size-cells = <0>;

		cpu {
			compatible = "arm,arm1136";
			device_type = "cpu";
		};
	};

	avic: avic-interrupt-controller@68000000 {
		compatible = "fsl,imx35-avic", "fsl,avic";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0x68000000 0x10000000>;
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&avic>;
		ranges;

		L2: l2-cache@30000000 {
			compatible = "arm,l210-cache";
			reg = <0x30000000 0x1000>;
			cache-unified;
			cache-level = <2>;
		};

		aips1: aips@43f00000 {
			compatible = "fsl,aips", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x43f00000 0x100000>;
			ranges;

			i2c1: i2c@43f80000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
				reg = <0x43f80000 0x4000>;
				clocks = <&clks 51>;
				clock-names = "ipg_per";
				interrupts = <10>;
				status = "disabled";
			};

			i2c3: i2c@43f84000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
				reg = <0x43f84000 0x4000>;
				clocks = <&clks 53>;
				clock-names = "ipg_per";
				interrupts = <3>;
				status = "disabled";
			};

			uart1: serial@43f90000 {
				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
				reg = <0x43f90000 0x4000>;
				clocks = <&clks 9>, <&clks 70>;
				clock-names = "ipg", "per";
				interrupts = <45>;
				status = "disabled";
			};

			uart2: serial@43f94000 {
				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
				reg = <0x43f94000 0x4000>;
				clocks = <&clks 9>, <&clks 71>;
				clock-names = "ipg", "per";
				interrupts = <32>;
				status = "disabled";
			};

			i2c2: i2c@43f98000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
				reg = <0x43f98000 0x4000>;
				clocks = <&clks 52>;
				clock-names = "ipg_per";
				interrupts = <4>;
				status = "disabled";
			};

			ssi1: ssi@43fa0000 {
				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
				reg = <0x43fa0000 0x4000>;
				interrupts = <11>;
				clocks = <&clks 68>;
				dmas = <&sdma 28 0 0>,
				       <&sdma 29 0 0>;
				dma-names = "rx", "tx";
				fsl,fifo-depth = <15>;
				status = "disabled";
			};

			spi1: cspi@43fa4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx35-cspi";
				reg = <0x43fa4000 0x4000>;
				clocks = <&clks 35 &clks 35>;
				clock-names = "ipg", "per";
				interrupts = <14>;
				status = "disabled";
			};

			iomuxc: iomuxc@43fac000 {
				compatible = "fsl,imx35-iomuxc";
				reg = <0x43fac000 0x4000>;
			};
		};

		spba: spba-bus@50000000 {
			compatible = "fsl,spba-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x50000000 0x100000>;
			ranges;

			uart3: serial@5000c000 {
				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
				reg = <0x5000c000 0x4000>;
				clocks = <&clks 9>, <&clks 72>;
				clock-names = "ipg", "per";
				interrupts = <18>;
				status = "disabled";
			};

			spi2: cspi@50010000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx35-cspi";
				reg = <0x50010000 0x4000>;
				interrupts = <13>;
				clocks = <&clks 36 &clks 36>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			fec: fec@50038000 {
				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
				reg = <0x50038000 0x4000>;
				clocks = <&clks 46>, <&clks 8>;
				clock-names = "ipg", "ahb";
				interrupts = <57>;
				status = "disabled";
			};
		};

		aips2: aips@53f00000 {
			compatible = "fsl,aips", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x53f00000 0x100000>;
			ranges;

			clks: ccm@53f80000 {
				compatible = "fsl,imx35-ccm";
				reg = <0x53f80000 0x4000>;
				interrupts = <31>;
				#clock-cells = <1>;
			};

			gpio3: gpio@53fa4000 {
				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
				reg = <0x53fa4000 0x4000>;
				interrupts = <56>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			esdhc1: esdhc@53fb4000 {
				compatible = "fsl,imx35-esdhc";
				reg = <0x53fb4000 0x4000>;
				interrupts = <7>;
				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			esdhc2: esdhc@53fb8000 {
				compatible = "fsl,imx35-esdhc";
				reg = <0x53fb8000 0x4000>;
				interrupts = <8>;
				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			esdhc3: esdhc@53fbc000 {
				compatible = "fsl,imx35-esdhc";
				reg = <0x53fbc000 0x4000>;
				interrupts = <9>;
				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			audmux: audmux@53fc4000 {
				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
				reg = <0x53fc4000 0x4000>;
				status = "disabled";
			};

			gpio1: gpio@53fcc000 {
				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
				reg = <0x53fcc000 0x4000>;
				interrupts = <52>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@53fd0000 {
				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
				reg = <0x53fd0000 0x4000>;
				interrupts = <51>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			sdma: sdma@53fd4000 {
				compatible = "fsl,imx35-sdma";
				reg = <0x53fd4000 0x4000>;
				clocks = <&clks 9>, <&clks 65>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				interrupts = <34>;
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
			};

			wdog: wdog@53fdc000 {
				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
				reg = <0x53fdc000 0x4000>;
				clocks = <&clks 74>;
				clock-names = "";
				interrupts = <55>;
			};

			can1: can@53fe4000 {
				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
				reg = <0x53fe4000 0x1000>;
				clocks = <&clks 33>;
				clock-names = "ipg";
				interrupts = <43>;
				status = "disabled";
			};

			can2: can@53fe8000 {
				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
				reg = <0x53fe8000 0x1000>;
				clocks = <&clks 34>;
				clock-names = "ipg";
				interrupts = <44>;
				status = "disabled";
			};

			usbotg: usb@53ff4000 {
				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
				reg = <0x53ff4000 0x0200>;
				interrupts = <37>;
				clocks = <&clks 73>;
				fsl,usbmisc = <&usbmisc 0>;
				fsl,usbphy = <&usbphy0>;
				status = "disabled";
			};

			usbhost1: usb@53ff4400 {
				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
				reg = <0x53ff4400 0x0200>;
				interrupts = <35>;
				clocks = <&clks 73>;
				fsl,usbmisc = <&usbmisc 1>;
				fsl,usbphy = <&usbphy1>;
				status = "disabled";
			};

			usbmisc: usbmisc@53ff4600 {
				#index-cells = <1>;
				compatible = "fsl,imx35-usbmisc";
				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
				clock-names = "ipg", "ahb", "per";
				reg = <0x53ff4600 0x00f>;
			};
		};

		emi@80000000 { /* External Memory Interface */
			compatible = "fsl,emi", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x40000000>;
			ranges;

			nfc: nand@bb000000 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
				reg = <0xbb000000 0x2000>;
				clocks = <&clks 29>;
				clock-names = "";
				interrupts = <33>;
				status = "disabled";
			};

			weim: weim@b8002000 {
				#address-cells = <2>;
				#size-cells = <1>;
				clocks = <&clks 0>;
				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
				reg = <0xb8002000 0x1000>;
				ranges = <
					0 0 0xa0000000 0x8000000
					1 0 0xa8000000 0x8000000
					2 0 0xb0000000 0x2000000
					3 0 0xb2000000 0x2000000
					4 0 0xb4000000 0x2000000
					5 0 0xb6000000 0x2000000
				>;
				status = "disabled";
			};
		};
	};

	usbphy {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		usbphy0: usb-phy@0 {
			reg = <0>;
			compatible = "usb-nop-xceiv";
		};

		usbphy1: usb-phy@1 {
			reg = <1>;
			compatible = "usb-nop-xceiv";
		};
	};
};
Commit	Line	Data
a4f3ac4d ST	1	/*
	2	* Copyright 2012 Steffen Trumtrar, Pengutronix
	3	*
	4	* based on imx27.dtsi
	5	*
	6	* This program is free software; you can redistribute it and/or modify it under
	7	* the terms of the GNU General Public License version 2 as published by the
	8	* Free Software Foundation.
	9	*/
	10
	11	#include "skeleton.dtsi"
	12	#include "imx35-pinfunc.h"
	13
	14	/ {
	15	aliases {
22970070	16	ethernet0 = &fec;
a4f3ac4d ST	17	gpio0 = &gpio1;
	18	gpio1 = &gpio2;
	19	gpio2 = &gpio3;
	20	serial0 = &uart1;
	21	serial1 = &uart2;
	22	serial2 = &uart3;
	23	spi0 = &spi1;
	24	spi1 = &spi2;
	25	};
	26
	27	cpus {
	28	#address-cells = <0>;
	29	#size-cells = <0>;
	30
	31	cpu {
	32	compatible = "arm,arm1136";
	33	device_type = "cpu";
	34	};
	35	};
	36
	37	avic: avic-interrupt-controller@68000000 {
	38	compatible = "fsl,imx35-avic", "fsl,avic";
	39	interrupt-controller;
	40	#interrupt-cells = <1>;
	41	reg = <0x68000000 0x10000000>;
	42	};
	43
	44	soc {
	45	#address-cells = <1>;
	46	#size-cells = <1>;
	47	compatible = "simple-bus";
	48	interrupt-parent = <&avic>;
	49	ranges;
	50
	51	L2: l2-cache@30000000 {
	52	compatible = "arm,l210-cache";
	53	reg = <0x30000000 0x1000>;
	54	cache-unified;
	55	cache-level = <2>;
	56	};
	57
	58	aips1: aips@43f00000 {
	59	compatible = "fsl,aips", "simple-bus";
	60	#address-cells = <1>;
	61	#size-cells = <1>;
	62	reg = <0x43f00000 0x100000>;
	63	ranges;
	64
	65	i2c1: i2c@43f80000 {
	66	#address-cells = <1>;
	67	#size-cells = <0>;
	68	compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
	69	reg = <0x43f80000 0x4000>;
	70	clocks = <&clks 51>;
	71	clock-names = "ipg_per";
	72	interrupts = <10>;
	73	status = "disabled";
	74	};
	75
	76	i2c3: i2c@43f84000 {
	77	#address-cells = <1>;
	78	#size-cells = <0>;
	79	compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
	80	reg = <0x43f84000 0x4000>;
81	clocks = <&clks 53>;
82	clock-names = "ipg_per";
83	interrupts = <3>;
84	status = "disabled";
85	};
86
87	uart1: serial@43f90000 {
88	compatible = "fsl,imx35-uart", "fsl,imx21-uart";
89	reg = <0x43f90000 0x4000>;
90	clocks = <&clks 9>, <&clks 70>;
91	clock-names = "ipg", "per";
92	interrupts = <45>;
93	status = "disabled";
94	};
95
96	uart2: serial@43f94000 {
97	compatible = "fsl,imx35-uart", "fsl,imx21-uart";
98	reg = <0x43f94000 0x4000>;
99	clocks = <&clks 9>, <&clks 71>;
100	clock-names = "ipg", "per";
101	interrupts = <32>;
102	status = "disabled";
103	};
104
105	i2c2: i2c@43f98000 {
106	#address-cells = <1>;
107	#size-cells = <0>;
108	compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
109	reg = <0x43f98000 0x4000>;
110	clocks = <&clks 52>;
111	clock-names = "ipg_per";
112	interrupts = <4>;
113	status = "disabled";
114	};
115
116	ssi1: ssi@43fa0000 {
117	compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
118	reg = <0x43fa0000 0x4000>;
119	interrupts = <11>;
120	clocks = <&clks 68>;
121	dmas = <&sdma 28 0 0>,
122	<&sdma 29 0 0>;
123	dma-names = "rx", "tx";
124	fsl,fifo-depth = <15>;
125	status = "disabled";
126	};
127
128	spi1: cspi@43fa4000 {
129	#address-cells = <1>;
130	#size-cells = <0>;
131	compatible = "fsl,imx35-cspi";
132	reg = <0x43fa4000 0x4000>;
133	clocks = <&clks 35 &clks 35>;
134	clock-names = "ipg", "per";
135	interrupts = <14>;
136	status = "disabled";
137	};
138
139	iomuxc: iomuxc@43fac000 {
140	compatible = "fsl,imx35-iomuxc";
141	reg = <0x43fac000 0x4000>;
142	};
143	};
144
145	spba: spba-bus@50000000 {
146	compatible = "fsl,spba-bus", "simple-bus";
147	#address-cells = <1>;
148	#size-cells = <1>;
149	reg = <0x50000000 0x100000>;
150	ranges;
151
152	uart3: serial@5000c000 {
153	compatible = "fsl,imx35-uart", "fsl,imx21-uart";
154	reg = <0x5000c000 0x4000>;
155	clocks = <&clks 9>, <&clks 72>;
156	clock-names = "ipg", "per";
157	interrupts = <18>;
158	status = "disabled";
159	};
160
161	spi2: cspi@50010000 {
162	#address-cells = <1>;
163	#size-cells = <0>;
164	compatible = "fsl,imx35-cspi";
165	reg = <0x50010000 0x4000>;
166	interrupts = <13>;
167	clocks = <&clks 36 &clks 36>;
168	clock-names = "ipg", "per";
169	status = "disabled";
170	};
171
172	fec: fec@50038000 {
173	compatible = "fsl,imx35-fec", "fsl,imx27-fec";
174	reg = <0x50038000 0x4000>;
175	clocks = <&clks 46>, <&clks 8>;
176	clock-names = "ipg", "ahb";
177	interrupts = <57>;
178	status = "disabled";
179	};
180	};
181
182	aips2: aips@53f00000 {
183	compatible = "fsl,aips", "simple-bus";
184	#address-cells = <1>;
185	#size-cells = <1>;
186	reg = <0x53f00000 0x100000>;
187	ranges;
188
189	clks: ccm@53f80000 {
190	compatible = "fsl,imx35-ccm";
191	reg = <0x53f80000 0x4000>;
192	interrupts = <31>;
193	#clock-cells = <1>;
194	};
195
196	gpio3: gpio@53fa4000 {
197	compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
198	reg = <0x53fa4000 0x4000>;
199	interrupts = <56>;
200	gpio-controller;
201	#gpio-cells = <2>;
202	interrupt-controller;
203	#interrupt-cells = <2>;
204	};
205
206	esdhc1: esdhc@53fb4000 {
207	compatible = "fsl,imx35-esdhc";
208	reg = <0x53fb4000 0x4000>;
209	interrupts = <7>;
210	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
211	clock-names = "ipg", "ahb", "per";
212	status = "disabled";
213	};
214
215	esdhc2: esdhc@53fb8000 {
216	compatible = "fsl,imx35-esdhc";
217	reg = <0x53fb8000 0x4000>;
218	interrupts = <8>;
219	clocks = <&clks 9>, <&clks 8>, <&clks 44>;
220	clock-names = "ipg", "ahb", "per";
221	status = "disabled";
222	};
223
224	esdhc3: esdhc@53fbc000 {
225	compatible = "fsl,imx35-esdhc";
226	reg = <0x53fbc000 0x4000>;
227	interrupts = <9>;
228	clocks = <&clks 9>, <&clks 8>, <&clks 45>;
229	clock-names = "ipg", "ahb", "per";
230	status = "disabled";
231	};
232
233	audmux: audmux@53fc4000 {
234	compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
235	reg = <0x53fc4000 0x4000>;
236	status = "disabled";
237	};
238
239	gpio1: gpio@53fcc000 {
240	compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
241	reg = <0x53fcc000 0x4000>;
242	interrupts = <52>;
243	gpio-controller;
244	#gpio-cells = <2>;
245	interrupt-controller;
246	#interrupt-cells = <2>;
247	};
248
249	gpio2: gpio@53fd0000 {
250	compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
251	reg = <0x53fd0000 0x4000>;
252	interrupts = <51>;
253	gpio-controller;
254	#gpio-cells = <2>;
255	interrupt-controller;
256	#interrupt-cells = <2>;
257	};
258
259	sdma: sdma@53fd4000 {
260	compatible = "fsl,imx35-sdma";
261	reg = <0x53fd4000 0x4000>;
262	clocks = <&clks 9>, <&clks 65>;
263	clock-names = "ipg", "ahb";
264	#dma-cells = <3>;
265	interrupts = <34>;
266	fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
267	};
268
269	wdog: wdog@53fdc000 {
270	compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
271	reg = <0x53fdc000 0x4000>;
272	clocks = <&clks 74>;
273	clock-names = "";
274	interrupts = <55>;
275	};
276
277	can1: can@53fe4000 {
278	compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
279	reg = <0x53fe4000 0x1000>;
280	clocks = <&clks 33>;
281	clock-names = "ipg";
282	interrupts = <43>;
283	status = "disabled";
284	};
285
286	can2: can@53fe8000 {
287	compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
288	reg = <0x53fe8000 0x1000>;
289	clocks = <&clks 34>;
290	clock-names = "ipg";
291	interrupts = <44>;
292	status = "disabled";
293	};
294
295	usbotg: usb@53ff4000 {
296	compatible = "fsl,imx35-usb", "fsl,imx27-usb";
297	reg = <0x53ff4000 0x0200>;
298	interrupts = <37>;
056c5a59	299	clocks = <&clks 73>;
a4f3ac4d	300	fsl,usbmisc = <&usbmisc 0>;
ff348251	301	fsl,usbphy = <&usbphy0>;
a4f3ac4d ST	302	status = "disabled";
	303	};
	304
	305	usbhost1: usb@53ff4400 {
	306	compatible = "fsl,imx35-usb", "fsl,imx27-usb";
	307	reg = <0x53ff4400 0x0200>;
	308	interrupts = <35>;
056c5a59	309	clocks = <&clks 73>;
a4f3ac4d	310	fsl,usbmisc = <&usbmisc 1>;
ff348251	311	fsl,usbphy = <&usbphy1>;
a4f3ac4d ST	312	status = "disabled";
	313	};
	314
	315	usbmisc: usbmisc@53ff4600 {
	316	#index-cells = <1>;
	317	compatible = "fsl,imx35-usbmisc";
	318	clocks = <&clks 9>, <&clks 73>, <&clks 28>;
	319	clock-names = "ipg", "ahb", "per";
	320	reg = <0x53ff4600 0x00f>;
	321	};
	322	};
	323
	324	emi@80000000 { /* External Memory Interface */
	325	compatible = "fsl,emi", "simple-bus";
	326	#address-cells = <1>;
	327	#size-cells = <1>;
	328	reg = <0x80000000 0x40000000>;
	329	ranges;
	330
	331	nfc: nand@bb000000 {
	332	#address-cells = <1>;
	333	#size-cells = <1>;
	334	compatible = "fsl,imx35-nand", "fsl,imx25-nand";
	335	reg = <0xbb000000 0x2000>;
	336	clocks = <&clks 29>;
	337	clock-names = "";
	338	interrupts = <33>;
	339	status = "disabled";
	340	};
	341
	342	weim: weim@b8002000 {
	343	#address-cells = <2>;
	344	#size-cells = <1>;
	345	clocks = <&clks 0>;
	346	compatible = "fsl,imx35-weim", "fsl,imx27-weim";
	347	reg = <0xb8002000 0x1000>;
	348	ranges = <
	349	0 0 0xa0000000 0x8000000
	350	1 0 0xa8000000 0x8000000
	351	2 0 0xb0000000 0x2000000
	352	3 0 0xb2000000 0x2000000
	353	4 0 0xb4000000 0x2000000
	354	5 0 0xb6000000 0x2000000
	355	>;
	356	status = "disabled";
	357	};
	358	};
	359	};
ff348251 DC	360
	361	usbphy {
	362	compatible = "simple-bus";
	363	#address-cells = <1>;
	364	#size-cells = <0>;
	365
	366	usbphy0: usb-phy@0 {
	367	reg = <0>;
	368	compatible = "usb-nop-xceiv";
	369	};
	370
	371	usbphy1: usb-phy@1 {
	372	reg = <1>;
	373	compatible = "usb-nop-xceiv";
	374	};
	375	};
a4f3ac4d	376	};