Commit | Line | Data |
---|---|---|
9daaf31a SG |
1 | /* |
2 | * Copyright 2011 Freescale Semiconductor, Inc. | |
3 | * Copyright 2011 Linaro Ltd. | |
4 | * | |
5 | * The code contained herein is licensed under the GNU General Public | |
6 | * License. You may obtain a copy of the GNU General Public License | |
7 | * Version 2 or later at the following locations: | |
8 | * | |
9 | * http://www.opensource.org/licenses/gpl-license.html | |
10 | * http://www.gnu.org/copyleft/gpl.html | |
11 | */ | |
12 | ||
13 | /dts-v1/; | |
36dffd8f | 14 | #include "imx51.dtsi" |
9daaf31a SG |
15 | |
16 | / { | |
17 | model = "Freescale i.MX51 Babbage Board"; | |
18 | compatible = "fsl,imx51-babbage", "fsl,imx51"; | |
19 | ||
9daaf31a SG |
20 | memory { |
21 | reg = <0x90000000 0x20000000>; | |
22 | }; | |
23 | ||
be4ccfce SG |
24 | display@di0 { |
25 | compatible = "fsl,imx-parallel-display"; | |
26 | crtcs = <&ipu 0>; | |
27 | interface-pix-fmt = "rgb24"; | |
28 | pinctrl-names = "default"; | |
29 | pinctrl-0 = <&pinctrl_ipu_disp1_1>; | |
30 | }; | |
a15d9f89 | 31 | |
be4ccfce SG |
32 | display@di1 { |
33 | compatible = "fsl,imx-parallel-display"; | |
34 | crtcs = <&ipu 1>; | |
35 | interface-pix-fmt = "rgb565"; | |
36 | pinctrl-names = "default"; | |
37 | pinctrl-0 = <&pinctrl_ipu_disp2_1>; | |
9daaf31a SG |
38 | }; |
39 | ||
40 | gpio-keys { | |
41 | compatible = "gpio-keys"; | |
42 | ||
43 | power { | |
44 | label = "Power Button"; | |
4d191868 | 45 | gpios = <&gpio2 21 0>; |
9daaf31a SG |
46 | linux,code = <116>; /* KEY_POWER */ |
47 | gpio-key,wakeup; | |
48 | }; | |
49 | }; | |
a15d9f89 SG |
50 | |
51 | sound { | |
52 | compatible = "fsl,imx51-babbage-sgtl5000", | |
53 | "fsl,imx-audio-sgtl5000"; | |
54 | model = "imx51-babbage-sgtl5000"; | |
55 | ssi-controller = <&ssi2>; | |
56 | audio-codec = <&sgtl5000>; | |
57 | audio-routing = | |
58 | "MIC_IN", "Mic Jack", | |
59 | "Mic Jack", "Mic Bias", | |
60 | "Headphone Jack", "HP_OUT"; | |
61 | mux-int-port = <2>; | |
62 | mux-ext-port = <3>; | |
63 | }; | |
9daaf31a | 64 | }; |
be4ccfce SG |
65 | |
66 | &esdhc1 { | |
67 | pinctrl-names = "default"; | |
68 | pinctrl-0 = <&pinctrl_esdhc1_1>; | |
69 | fsl,cd-controller; | |
70 | fsl,wp-controller; | |
71 | status = "okay"; | |
72 | }; | |
73 | ||
74 | &esdhc2 { | |
75 | pinctrl-names = "default"; | |
76 | pinctrl-0 = <&pinctrl_esdhc2_1>; | |
77 | cd-gpios = <&gpio1 6 0>; | |
78 | wp-gpios = <&gpio1 5 0>; | |
79 | status = "okay"; | |
80 | }; | |
81 | ||
82 | &uart3 { | |
83 | pinctrl-names = "default"; | |
84 | pinctrl-0 = <&pinctrl_uart3_1>; | |
85 | fsl,uart-has-rtscts; | |
86 | status = "okay"; | |
87 | }; | |
88 | ||
89 | &ecspi1 { | |
90 | pinctrl-names = "default"; | |
91 | pinctrl-0 = <&pinctrl_ecspi1_1>; | |
92 | fsl,spi-num-chipselects = <2>; | |
93 | cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; | |
94 | status = "okay"; | |
95 | ||
96 | pmic: mc13892@0 { | |
97 | #address-cells = <1>; | |
98 | #size-cells = <0>; | |
99 | compatible = "fsl,mc13892"; | |
100 | spi-max-frequency = <6000000>; | |
101 | reg = <0>; | |
102 | interrupt-parent = <&gpio1>; | |
103 | interrupts = <8 0x4>; | |
104 | ||
105 | regulators { | |
106 | sw1_reg: sw1 { | |
107 | regulator-min-microvolt = <600000>; | |
108 | regulator-max-microvolt = <1375000>; | |
109 | regulator-boot-on; | |
110 | regulator-always-on; | |
111 | }; | |
112 | ||
113 | sw2_reg: sw2 { | |
114 | regulator-min-microvolt = <900000>; | |
115 | regulator-max-microvolt = <1850000>; | |
116 | regulator-boot-on; | |
117 | regulator-always-on; | |
118 | }; | |
119 | ||
120 | sw3_reg: sw3 { | |
121 | regulator-min-microvolt = <1100000>; | |
122 | regulator-max-microvolt = <1850000>; | |
123 | regulator-boot-on; | |
124 | regulator-always-on; | |
125 | }; | |
126 | ||
127 | sw4_reg: sw4 { | |
128 | regulator-min-microvolt = <1100000>; | |
129 | regulator-max-microvolt = <1850000>; | |
130 | regulator-boot-on; | |
131 | regulator-always-on; | |
132 | }; | |
133 | ||
134 | vpll_reg: vpll { | |
135 | regulator-min-microvolt = <1050000>; | |
136 | regulator-max-microvolt = <1800000>; | |
137 | regulator-boot-on; | |
138 | regulator-always-on; | |
139 | }; | |
140 | ||
141 | vdig_reg: vdig { | |
142 | regulator-min-microvolt = <1650000>; | |
143 | regulator-max-microvolt = <1650000>; | |
144 | regulator-boot-on; | |
145 | }; | |
146 | ||
147 | vsd_reg: vsd { | |
148 | regulator-min-microvolt = <1800000>; | |
149 | regulator-max-microvolt = <3150000>; | |
150 | }; | |
151 | ||
152 | vusb2_reg: vusb2 { | |
153 | regulator-min-microvolt = <2400000>; | |
154 | regulator-max-microvolt = <2775000>; | |
155 | regulator-boot-on; | |
156 | regulator-always-on; | |
157 | }; | |
158 | ||
159 | vvideo_reg: vvideo { | |
160 | regulator-min-microvolt = <2775000>; | |
161 | regulator-max-microvolt = <2775000>; | |
162 | }; | |
163 | ||
164 | vaudio_reg: vaudio { | |
165 | regulator-min-microvolt = <2300000>; | |
166 | regulator-max-microvolt = <3000000>; | |
167 | }; | |
168 | ||
169 | vcam_reg: vcam { | |
170 | regulator-min-microvolt = <2500000>; | |
171 | regulator-max-microvolt = <3000000>; | |
172 | }; | |
173 | ||
174 | vgen1_reg: vgen1 { | |
175 | regulator-min-microvolt = <1200000>; | |
176 | regulator-max-microvolt = <1200000>; | |
177 | }; | |
178 | ||
179 | vgen2_reg: vgen2 { | |
180 | regulator-min-microvolt = <1200000>; | |
181 | regulator-max-microvolt = <3150000>; | |
182 | regulator-always-on; | |
183 | }; | |
184 | ||
185 | vgen3_reg: vgen3 { | |
186 | regulator-min-microvolt = <1800000>; | |
187 | regulator-max-microvolt = <2900000>; | |
188 | regulator-always-on; | |
189 | }; | |
190 | }; | |
191 | }; | |
192 | ||
193 | flash: at45db321d@1 { | |
194 | #address-cells = <1>; | |
195 | #size-cells = <1>; | |
196 | compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; | |
197 | spi-max-frequency = <25000000>; | |
198 | reg = <1>; | |
199 | ||
200 | partition@0 { | |
201 | label = "U-Boot"; | |
202 | reg = <0x0 0x40000>; | |
203 | read-only; | |
204 | }; | |
205 | ||
206 | partition@40000 { | |
207 | label = "Kernel"; | |
208 | reg = <0x40000 0x3c0000>; | |
209 | }; | |
210 | }; | |
211 | }; | |
212 | ||
213 | &ssi2 { | |
214 | fsl,mode = "i2s-slave"; | |
215 | status = "okay"; | |
216 | }; | |
217 | ||
218 | &iomuxc { | |
219 | pinctrl-names = "default"; | |
220 | pinctrl-0 = <&pinctrl_hog>; | |
221 | ||
222 | hog { | |
223 | pinctrl_hog: hoggrp { | |
224 | fsl,pins = < | |
e1641531 SG |
225 | MX51_PAD_GPIO1_0__SD1_CD 0x20d5 |
226 | MX51_PAD_GPIO1_1__SD1_WP 0x20d5 | |
227 | MX51_PAD_GPIO1_5__GPIO1_5 0x100 | |
228 | MX51_PAD_GPIO1_6__GPIO1_6 0x100 | |
229 | MX51_PAD_EIM_A27__GPIO2_21 0x5 | |
230 | MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 | |
231 | MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 | |
be4ccfce SG |
232 | >; |
233 | }; | |
234 | }; | |
235 | }; | |
236 | ||
237 | &uart1 { | |
238 | pinctrl-names = "default"; | |
239 | pinctrl-0 = <&pinctrl_uart1_1>; | |
240 | fsl,uart-has-rtscts; | |
241 | status = "okay"; | |
242 | }; | |
243 | ||
244 | &uart2 { | |
245 | pinctrl-names = "default"; | |
246 | pinctrl-0 = <&pinctrl_uart2_1>; | |
247 | status = "okay"; | |
248 | }; | |
249 | ||
250 | &i2c2 { | |
251 | pinctrl-names = "default"; | |
252 | pinctrl-0 = <&pinctrl_i2c2_1>; | |
253 | status = "okay"; | |
254 | ||
255 | sgtl5000: codec@0a { | |
256 | compatible = "fsl,sgtl5000"; | |
257 | reg = <0x0a>; | |
258 | clock-frequency = <26000000>; | |
259 | VDDA-supply = <&vdig_reg>; | |
260 | VDDIO-supply = <&vvideo_reg>; | |
261 | }; | |
262 | }; | |
263 | ||
264 | &audmux { | |
265 | pinctrl-names = "default"; | |
266 | pinctrl-0 = <&pinctrl_audmux_1>; | |
267 | status = "okay"; | |
268 | }; | |
269 | ||
270 | &fec { | |
271 | pinctrl-names = "default"; | |
272 | pinctrl-0 = <&pinctrl_fec_1>; | |
273 | phy-mode = "mii"; | |
274 | status = "okay"; | |
275 | }; | |
67eb7c0b LY |
276 | |
277 | &kpp { | |
278 | pinctrl-names = "default"; | |
279 | pinctrl-0 = <&pinctrl_kpp_1>; | |
280 | linux,keymap = <0x00000067 /* KEY_UP */ | |
281 | 0x0001006c /* KEY_DOWN */ | |
282 | 0x00020072 /* KEY_VOLUMEDOWN */ | |
283 | 0x00030066 /* KEY_HOME */ | |
284 | 0x0100006a /* KEY_RIGHT */ | |
285 | 0x01010069 /* KEY_LEFT */ | |
286 | 0x0102001c /* KEY_ENTER */ | |
287 | 0x01030073 /* KEY_VOLUMEUP */ | |
288 | 0x02000040 /* KEY_F6 */ | |
289 | 0x02010042 /* KEY_F8 */ | |
290 | 0x02020043 /* KEY_F9 */ | |
291 | 0x02030044 /* KEY_F10 */ | |
292 | 0x0300003b /* KEY_F1 */ | |
293 | 0x0301003c /* KEY_F2 */ | |
294 | 0x0302003d /* KEY_F3 */ | |
295 | 0x03030074>; /* KEY_POWER */ | |
296 | status = "okay"; | |
297 | }; |