[deliverable/linux.git] / arch / arm / boot / dts / imx53-ard.dts

/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
/include/ "imx53.dtsi"

/ {
	model = "Freescale i.MX53 Automotive Reference Design Board";
	compatible = "fsl,imx53-ard", "fsl,imx53";

	memory {
		reg = <0x70000000 0x40000000>;
	};

	soc {
		aips@50000000 { /* AIPS1 */
			spba@50000000 {
				esdhc@50004000 { /* ESDHC1 */
					cd-gpios = <&gpio1 1 0>;
					wp-gpios = <&gpio1 9 0>;
					status = "okay";
				};
			};

			wdog@53f98000 { /* WDOG1 */
				status = "okay";
			};

			iomuxc@53fa8000 {
				compatible = "fsl,imx53-iomuxc-ard";
				reg = <0x53fa8000 0x4000>;
			};

			uart1: serial@53fbc000 {
				status = "okay";
			};
		};

		aips@60000000 {	/* AIPS2 */
			sdma@63fb0000 {
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
			};
		};
	};

	eim-cs1@f4000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,eim-bus", "simple-bus";
		reg = <0xf4000000 0x3ff0000>;
		ranges;

		lan9220@f4000000 {
			compatible = "smsc,lan9220", "smsc,lan9115";
			reg = <0xf4000000 0x2000000>;
			phy-mode = "mii";
			interrupt-parent = <&gpio2>;
			interrupts = <31 0x8>;
			reg-io-width = <4>;
			/*
			 * VDD33A and VDDVARIO of LAN9220 are supplied by
			 * SW4_3V3 of LTC3589.  Before the regulator driver
			 * for this PMIC is available, we use a fixed dummy
			 * 3V3 regulator to get LAN9220 driver probing work.
			 */
			vdd33a-supply = <&reg_3p3v>;
			vddvario-supply = <&reg_3p3v>;
			smsc,irq-push-pull;
		};
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		home {
			label = "Home";
			gpios = <&gpio5 10 0>;
			linux,code = <102>; /* KEY_HOME */
			gpio-key,wakeup;
		};

		back {
			label = "Back";
			gpios = <&gpio5 11 0>;
			linux,code = <158>; /* KEY_BACK */
			gpio-key,wakeup;
		};

		program {
			label = "Program";
			gpios = <&gpio5 12 0>;
			linux,code = <362>; /* KEY_PROGRAM */
			gpio-key,wakeup;
		};

		volume-up {
			label = "Volume Up";
			gpios = <&gpio5 13 0>;
			linux,code = <115>; /* KEY_VOLUMEUP */
		};

		volume-down {
			label = "Volume Down";
			gpios = <&gpio4 0 0>;
			linux,code = <114>; /* KEY_VOLUMEDOWN */
		};
	};
};
Commit	Line	Data
73d2b4cd SG	1	/*
	2	* Copyright 2011 Freescale Semiconductor, Inc.
	3	* Copyright 2011 Linaro Ltd.
	4	*
	5	* The code contained herein is licensed under the GNU General Public
	6	* License. You may obtain a copy of the GNU General Public License
	7	* Version 2 or later at the following locations:
	8	*
	9	* http://www.opensource.org/licenses/gpl-license.html
	10	* http://www.gnu.org/copyleft/gpl.html
	11	*/
	12
	13	/dts-v1/;
	14	/include/ "imx53.dtsi"
	15
	16	/ {
	17	model = "Freescale i.MX53 Automotive Reference Design Board";
	18	compatible = "fsl,imx53-ard", "fsl,imx53";
	19
73d2b4cd SG	20	memory {
	21	reg = <0x70000000 0x40000000>;
	22	};
	23
	24	soc {
	25	aips@50000000 { /* AIPS1 */
	26	spba@50000000 {
	27	esdhc@50004000 { /* ESDHC1 */
4d191868 RZ	28	cd-gpios = <&gpio1 1 0>;
4d191868 RZ	29	wp-gpios = <&gpio1 9 0>;
73d2b4cd SG	30	status = "okay";
	31	};
	32	};
	33
	34	wdog@53f98000 { /* WDOG1 */
	35	status = "okay";
	36	};
	37
	38	iomuxc@53fa8000 {
	39	compatible = "fsl,imx53-iomuxc-ard";
	40	reg = <0x53fa8000 0x4000>;
	41	};
	42
0c456cfa	43	uart1: serial@53fbc000 {
73d2b4cd SG	44	status = "okay";
	45	};
	46	};
	47
	48	aips@60000000 { /* AIPS2 */
	49	sdma@63fb0000 {
	50	fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
	51	};
	52	};
	53	};
	54
	55	eim-cs1@f4000000 {
	56	#address-cells = <1>;
	57	#size-cells = <1>;
	58	compatible = "fsl,eim-bus", "simple-bus";
	59	reg = <0xf4000000 0x3ff0000>;
	60	ranges;
	61
	62	lan9220@f4000000 {
	63	compatible = "smsc,lan9220", "smsc,lan9115";
	64	reg = <0xf4000000 0x2000000>;
	65	phy-mode = "mii";
4d191868	66	interrupt-parent = <&gpio2>;
65dee07c	67	interrupts = <31 0x8>;
73d2b4cd	68	reg-io-width = <4>;
1eec0c56 SG	69	/*
	70	* VDD33A and VDDVARIO of LAN9220 are supplied by
	71	* SW4_3V3 of LTC3589. Before the regulator driver
	72	* for this PMIC is available, we use a fixed dummy
	73	* 3V3 regulator to get LAN9220 driver probing work.
	74	*/
	75	vdd33a-supply = <&reg_3p3v>;
	76	vddvario-supply = <&reg_3p3v>;
73d2b4cd SG	77	smsc,irq-push-pull;
	78	};
	79	};
	80
1eec0c56 SG	81	regulators {
	82	compatible = "simple-bus";
	83
	84	reg_3p3v: 3p3v {
	85	compatible = "regulator-fixed";
	86	regulator-name = "3P3V";
	87	regulator-min-microvolt = <3300000>;
	88	regulator-max-microvolt = <3300000>;
	89	regulator-always-on;
	90	};
	91	};
	92
73d2b4cd SG	93	gpio-keys {
	94	compatible = "gpio-keys";
	95
	96	home {
	97	label = "Home";
4d191868	98	gpios = <&gpio5 10 0>;
73d2b4cd SG	99	linux,code = <102>; /* KEY_HOME */
	100	gpio-key,wakeup;
	101	};
	102
	103	back {
	104	label = "Back";
4d191868	105	gpios = <&gpio5 11 0>;
73d2b4cd SG	106	linux,code = <158>; /* KEY_BACK */
	107	gpio-key,wakeup;
	108	};
	109
	110	program {
	111	label = "Program";
4d191868	112	gpios = <&gpio5 12 0>;
73d2b4cd SG	113	linux,code = <362>; /* KEY_PROGRAM */
	114	gpio-key,wakeup;
	115	};
	116
	117	volume-up {
	118	label = "Volume Up";
4d191868	119	gpios = <&gpio5 13 0>;
73d2b4cd SG	120	linux,code = <115>; /* KEY_VOLUMEUP */
	121	};
	122
	123	volume-down {
	124	label = "Volume Down";
4d191868	125	gpios = <&gpio4 0 0>;
73d2b4cd SG	126	linux,code = <114>; /* KEY_VOLUMEDOWN */
	127	};
	128	};
	129	};