[deliverable/linux.git] / arch / arm / boot / dts / imx53-mba53.dts

/*
 * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
 * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx53-tqma53.dtsi"

/ {
	model = "TQ MBa53 starter kit";
	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm2 0 50000>;
		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
		default-brightness-level = <10>;
		enable-gpios = <&gpio7 7 0>;
		power-supply = <&reg_backlight>;
	};

	disp1: display@disp1 {
		compatible = "fsl,imx-parallel-display";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_disp1_1>;
		interface-pix-fmt = "rgb24";
		status = "disabled";

		port {
			display1_in: endpoint {
				remote-endpoint = <&ipu_di1_disp1>;
			};
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_backlight: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "lcd-supply";
			gpio = <&gpio2 5 0>;
			startup-delay-us = <5000>;
		};

		reg_3p2v: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "3P2V";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-always-on;
		};
	};

	sound {
		compatible = "tq,imx53-mba53-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "imx53-mba53-sgtl5000";
		ssi-controller = <&ssi2>;
		audio-codec = <&codec>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <2>;
		mux-ext-port = <5>;
	};
};

&ldb {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lvds1_1>;
	status = "disabled";
};

&iomuxc {
	lvds1 {
		pinctrl_lvds1_1: lvds1-grp1 {
			fsl,pins = <
				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
			>;
		};

		pinctrl_lvds1_2: lvds1-grp2 {
			fsl,pins = <
				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
			>;
		};
	};

	disp1 {
		pinctrl_disp1_1: disp1-grp1 {
			fsl,pins = <
				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
			>;
		};
	};

	tve {
		pinctrl_vga_sync_1: vgasync-grp1 {
			fsl,pins = <
				/* VGA_VSYNC, HSYNC with max drive strength */
				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
			>;
		};
	};
};

&ipu_di1_disp1 {
	remote-endpoint = <&display1_in>;
};

&cspi {
	status = "okay";
};

&audmux {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
};

&i2c2 {
	codec: sgtl5000@a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
		VDDA-supply = <&reg_3p2v>;
		VDDIO-supply = <&reg_3p2v>;
	};

	expander: pca9554@20 {
		compatible = "pca9554";
		reg = <0x20>;
		interrupts = <109>;
		#gpio-cells = <2>;
		gpio-controller;
	};

	sensor2: lm75@49 {
		compatible = "lm75";
		reg = <0x49>;
	};
};

&fec {
	phy-reset-gpios = <&gpio7 6 0>;
	status = "okay";
};

&esdhc2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&ecspi1 {
	status = "okay";
};

&usbotg {
	dr_mode = "host";
	status = "okay";
};

&usbh1 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&ssi2 {
	fsl,mode = "i2s-slave";
	status = "okay";
};

&uart2 {
	status = "okay";
};

&can1 {
	status = "okay";
};

&can2 {
	status = "okay";
};

&i2c3 {
	status = "okay";
};

&tve {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_vga_sync_1>;
	ddc-i2c-bus = <&i2c3>;
	fsl,tve-mode = "vga";
	fsl,hsync-pin = <4>;
	fsl,vsync-pin = <6>;
	status = "okay";
};
Commit	Line	Data
be3a568d ST	1	/*
	2	* Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
	3	* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
	4	*
	5	* The code contained herein is licensed under the GNU General Public
	6	* License. You may obtain a copy of the GNU General Public License
	7	* Version 2 or later at the following locations:
	8	*
	9	* http://www.opensource.org/licenses/gpl-license.html
	10	* http://www.gnu.org/copyleft/gpl.html
	11	*/
	12
	13	/dts-v1/;
36dffd8f	14	#include "imx53-tqma53.dtsi"
be3a568d ST	15
	16	/ {
	17	model = "TQ MBa53 starter kit";
	18	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
4fa8cf79	19
4fa8cf79 SH	20	backlight {
4fa8cf79 SH	21	compatible = "pwm-backlight";
15968f1b	22	pwms = <&pwm2 0 50000>;
4fa8cf79 SH	23	brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
	24	default-brightness-level = <10>;
	25	enable-gpios = <&gpio7 7 0>;
	26	power-supply = <&reg_backlight>;
	27	};
	28
	29	disp1: display@disp1 {
	30	compatible = "fsl,imx-parallel-display";
	31	pinctrl-names = "default";
	32	pinctrl-0 = <&pinctrl_disp1_1>;
4fa8cf79 SH	33	interface-pix-fmt = "rgb24";
4fa8cf79 SH	34	status = "disabled";
eefb8008	35
e05c8c9a PZ	36	port {
	37	display1_in: endpoint {
	38	remote-endpoint = <&ipu_di1_disp1>;
	39	};
	40	};
17b5001b RK	41	};
17b5001b RK	42
a4a2aa9b SG	43	regulators {
a4a2aa9b SG	44	compatible = "simple-bus";
352d318c SG	45	#address-cells = <1>;
352d318c SG	46	#size-cells = <0>;
a4a2aa9b	47
352d318c	48	reg_backlight: regulator@0 {
a4a2aa9b	49	compatible = "regulator-fixed";
352d318c	50	reg = <0>;
a4a2aa9b SG	51	regulator-name = "lcd-supply";
	52	gpio = <&gpio2 5 0>;
	53	startup-delay-us = <5000>;
a4a2aa9b SG	54	};
a4a2aa9b SG	55
352d318c	56	reg_3p2v: regulator@1 {
a4a2aa9b	57	compatible = "regulator-fixed";
352d318c	58	reg = <1>;
a4a2aa9b SG	59	regulator-name = "3P2V";
	60	regulator-min-microvolt = <3200000>;
	61	regulator-max-microvolt = <3200000>;
	62	regulator-always-on;
	63	};
eefb8008 MN	64	};
	65
	66	sound {
	67	compatible = "tq,imx53-mba53-sgtl5000",
	68	"fsl,imx-audio-sgtl5000";
	69	model = "imx53-mba53-sgtl5000";
	70	ssi-controller = <&ssi2>;
	71	audio-codec = <&codec>;
	72	audio-routing =
	73	"MIC_IN", "Mic Jack",
	74	"Mic Jack", "Mic Bias",
	75	"Headphone Jack", "HP_OUT";
	76	mux-int-port = <2>;
	77	mux-ext-port = <5>;
	78	};
4fa8cf79 SH	79	};
	80
	81	&ldb {
	82	pinctrl-names = "default";
	83	pinctrl-0 = <&pinctrl_lvds1_1>;
	84	status = "disabled";
be3a568d ST	85	};
	86
	87	&iomuxc {
	88	lvds1 {
	89	pinctrl_lvds1_1: lvds1-grp1 {
e1641531	90	fsl,pins = <
188e97db ST	91	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
	92	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
	93	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
	94	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
	95	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
e1641531	96	>;
be3a568d ST	97	};
	98
	99	pinctrl_lvds1_2: lvds1-grp2 {
e1641531	100	fsl,pins = <
188e97db ST	101	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
	102	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
	103	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
	104	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
	105	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
e1641531	106	>;
be3a568d ST	107	};
	108	};
	109
	110	disp1 {
	111	pinctrl_disp1_1: disp1-grp1 {
e1641531	112	fsl,pins = <
81b8a3cd	113	MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
188e97db ST	114	MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */
	115	MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */
	116	MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */
	117	MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
	118	MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
	119	MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
	120	MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
	121	MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
	122	MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
	123	MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
	124	MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
	125	MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
	126	MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
	127	MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
	128	MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
	129	MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
	130	MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
	131	MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000
	132	MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000
	133	MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000
	134	MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000
	135	MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000
	136	MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000
	137	MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000
	138	MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000
	139	MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000
	140	MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000
e1641531	141	>;
be3a568d ST	142	};
be3a568d ST	143	};
d7db5392 PZ	144
	145	tve {
	146	pinctrl_vga_sync_1: vgasync-grp1 {
	147	fsl,pins = <
	148	/* VGA_VSYNC, HSYNC with max drive strength */
	149	MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6
	150	MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6
	151	>;
	152	};
	153	};
be3a568d ST	154	};
be3a568d ST	155
e05c8c9a PZ	156	&ipu_di1_disp1 {
	157	remote-endpoint = <&display1_in>;
	158	};
	159
be3a568d ST	160	&cspi {
	161	status = "okay";
	162	};
	163
eefb8008 MN	164	&audmux {
	165	status = "okay";
	166	pinctrl-names = "default";
7ac0f700	167	pinctrl-0 = <&pinctrl_audmux>;
eefb8008 MN	168	};
eefb8008 MN	169
be3a568d ST	170	&i2c2 {
	171	codec: sgtl5000@a {
	172	compatible = "fsl,sgtl5000";
	173	reg = <0x0a>;
564695dd	174	clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
eefb8008 MN	175	VDDA-supply = <&reg_3p2v>;
eefb8008 MN	176	VDDIO-supply = <&reg_3p2v>;
be3a568d ST	177	};
	178
	179	expander: pca9554@20 {
	180	compatible = "pca9554";
	181	reg = <0x20>;
	182	interrupts = <109>;
74154be0 MN	183	#gpio-cells = <2>;
74154be0 MN	184	gpio-controller;
be3a568d ST	185	};
	186
	187	sensor2: lm75@49 {
	188	compatible = "lm75";
	189	reg = <0x49>;
	190	};
	191	};
	192
	193	&fec {
deb19eb7	194	phy-reset-gpios = <&gpio7 6 0>;
be3a568d ST	195	status = "okay";
	196	};
	197
	198	&esdhc2 {
	199	status = "okay";
	200	};
	201
	202	&uart3 {
	203	status = "okay";
	204	};
	205
	206	&ecspi1 {
	207	status = "okay";
	208	};
	209
3b1a0f23 MO	210	&usbotg {
	211	dr_mode = "host";
	212	status = "okay";
	213	};
	214
	215	&usbh1 {
	216	status = "okay";
	217	};
	218
be3a568d ST	219	&uart1 {
	220	status = "okay";
	221	};
	222
eefb8008 MN	223	&ssi2 {
	224	fsl,mode = "i2s-slave";
	225	status = "okay";
	226	};
	227
be3a568d ST	228	&uart2 {
	229	status = "okay";
	230	};
	231
	232	&can1 {
	233	status = "okay";
	234	};
	235
	236	&can2 {
	237	status = "okay";
	238	};
	239
	240	&i2c3 {
	241	status = "okay";
	242	};
d7db5392 PZ	243
	244	&tve {
	245	pinctrl-names = "default";
	246	pinctrl-0 = <&pinctrl_vga_sync_1>;
a3fe9641	247	ddc-i2c-bus = <&i2c3>;
d7db5392 PZ	248	fsl,tve-mode = "vga";
	249	fsl,hsync-pin = <4>;
	250	fsl,vsync-pin = <6>;
	251	status = "okay";
	252	};