Commit | Line | Data |
---|---|---|
226d16c8 JW |
1 | /* |
2 | * Copyright 2015 Timesys Corporation. | |
3 | * Copyright 2015 General Electric Company | |
4 | * | |
5 | * This file is dual-licensed: you can use it either under the terms | |
6 | * of the GPL or the X11 license, at your option. Note that this dual | |
7 | * licensing only applies to this file, and not this project as a | |
8 | * whole. | |
9 | * | |
10 | * a) This file is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License | |
12 | * version 2 as published by the Free Software Foundation. | |
13 | * | |
14 | * This file is distributed in the hope that it will be useful | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * Or, alternatively | |
20 | * | |
21 | * b) Permission is hereby granted, free of charge, to any person | |
22 | * obtaining a copy of this software and associated documentation | |
23 | * files (the "Software"), to deal in the Software without | |
24 | * restriction, including without limitation the rights to use | |
25 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
26 | * sell copies of the Software, and to permit persons to whom the | |
27 | * Software is furnished to do so, subject to the following | |
28 | * conditions: | |
29 | * | |
30 | * The above copyright notice and this permission notice shall be | |
31 | * included in all copies or substantial portions of the Software. | |
32 | * | |
33 | * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND | |
34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY | |
38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
40 | * OTHER DEALINGS IN THE SOFTWARE. | |
41 | */ | |
42 | ||
43 | #include "imx6q-ba16.dtsi" | |
44 | ||
45 | / { | |
46 | clocks { | |
47 | mclk: clock@0 { | |
48 | compatible = "fixed-clock"; | |
49 | reg = <0>; | |
50 | #clock-cells = <0>; | |
51 | clock-frequency = <22000000>; | |
52 | }; | |
53 | }; | |
54 | ||
55 | reg_wl18xx_vmmc: regulator-wl18xx { | |
56 | compatible = "regulator-fixed"; | |
57 | regulator-name = "vwl1807"; | |
58 | regulator-min-microvolt = <3300000>; | |
59 | regulator-max-microvolt = <3300000>; | |
60 | gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>; | |
61 | startup-delay-us = <70000>; | |
62 | enable-active-high; | |
63 | }; | |
64 | ||
65 | reg_wlan: regulator-wlan { | |
66 | compatible = "regulator-fixed"; | |
67 | regulator-name = "3P3V_wlan"; | |
68 | regulator-min-microvolt = <3300000>; | |
69 | regulator-max-microvolt = <3300000>; | |
70 | regulator-always-on; | |
71 | regulator-boot-on; | |
72 | gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>; | |
73 | }; | |
74 | ||
75 | sound { | |
76 | compatible = "fsl,imx6q-ba16-sgtl5000", | |
77 | "fsl,imx-audio-sgtl5000"; | |
78 | model = "imx6q-ba16-sgtl5000"; | |
79 | ssi-controller = <&ssi1>; | |
80 | audio-codec = <&sgtl5000>; | |
81 | audio-routing = | |
82 | "MIC_IN", "Mic Jack", | |
83 | "Mic Jack", "Mic Bias", | |
84 | "LINE_IN", "Line In Jack", | |
85 | "Headphone Jack", "HP_OUT"; | |
86 | mux-int-port = <1>; | |
87 | mux-ext-port = <4>; | |
88 | }; | |
89 | }; | |
90 | ||
91 | &ecspi5 { | |
92 | fsl,spi-num-chipselects = <1>; | |
93 | cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; | |
94 | pinctrl-names = "default"; | |
95 | pinctrl-0 = <&pinctrl_ecspi5>; | |
96 | status = "okay"; | |
97 | ||
98 | m25_eeprom: m25p80@0 { | |
99 | compatible = "atmel,at25"; | |
100 | spi-max-frequency = <20000000>; | |
101 | size = <0x8000>; | |
102 | pagesize = <64>; | |
103 | reg = <0>; | |
104 | address-width = <16>; | |
105 | }; | |
106 | }; | |
107 | ||
108 | &i2c1 { | |
109 | pca9547: mux@70 { | |
110 | compatible = "nxp,pca9547"; | |
111 | reg = <0x70>; | |
112 | #address-cells = <1>; | |
113 | #size-cells = <0>; | |
114 | ||
115 | mux1_i2c1: i2c@0 { | |
116 | #address-cells = <1>; | |
117 | #size-cells = <0>; | |
118 | reg = <0x0>; | |
119 | ||
120 | ads7830: ads7830@48 { | |
121 | compatible = "ti,ads7830"; | |
122 | reg = <0x48>; | |
123 | }; | |
124 | ||
125 | mma8453: mma8453@1c { | |
126 | compatible = "fsl,mma8453"; | |
127 | reg = <0x1c>; | |
128 | }; | |
129 | }; | |
130 | ||
131 | mux1_i2c2: i2c@1 { | |
132 | #address-cells = <1>; | |
133 | #size-cells = <0>; | |
134 | reg = <0x1>; | |
135 | ||
136 | eeprom: eeprom@50 { | |
137 | compatible = "atmel,24c08"; | |
138 | reg = <0x50>; | |
139 | }; | |
140 | ||
141 | mpl3115: mpl3115@60 { | |
142 | compatible = "fsl,mpl3115"; | |
143 | reg = <0x60>; | |
144 | }; | |
145 | }; | |
146 | ||
147 | mux1_i2c3: i2c@2 { | |
148 | #address-cells = <1>; | |
149 | #size-cells = <0>; | |
150 | reg = <0x2>; | |
151 | }; | |
152 | ||
153 | mux1_i2c4: i2c@3 { | |
154 | #address-cells = <1>; | |
155 | #size-cells = <0>; | |
156 | reg = <0x3>; | |
157 | ||
158 | sgtl5000: codec@0a { | |
159 | compatible = "fsl,sgtl5000"; | |
160 | reg = <0x0a>; | |
161 | clocks = <&mclk>; | |
162 | VDDA-supply = <®_1p8v>; | |
163 | VDDIO-supply = <®_3p3v>; | |
164 | }; | |
165 | }; | |
166 | ||
167 | mux1_i2c5: i2c@4 { | |
168 | #address-cells = <1>; | |
169 | #size-cells = <0>; | |
170 | reg = <0x4>; | |
171 | ||
172 | pca9539: pca9539@74 { | |
173 | compatible = "nxp,pca9539"; | |
174 | reg = <0x74>; | |
175 | gpio-controller; | |
176 | #gpio-cells = <2>; | |
177 | interrupt-controller; | |
178 | interrupt-parent = <&gpio2>; | |
179 | interrupts = <3 IRQ_TYPE_LEVEL_LOW>; | |
180 | }; | |
181 | }; | |
182 | ||
183 | mux1_i2c6: i2c@5 { | |
184 | #address-cells = <1>; | |
185 | #size-cells = <0>; | |
186 | reg = <0x5>; | |
187 | }; | |
188 | ||
189 | mux1_i2c7: i2c@6 { | |
190 | #address-cells = <1>; | |
191 | #size-cells = <0>; | |
192 | reg = <0x6>; | |
193 | }; | |
194 | ||
195 | mux1_i2c8: i2c@7 { | |
196 | #address-cells = <1>; | |
197 | #size-cells = <0>; | |
198 | reg = <0x7>; | |
199 | }; | |
200 | }; | |
201 | }; | |
202 | ||
203 | &usdhc4 { | |
204 | pinctrl-names = "default"; | |
205 | pinctrl-0 = <&pinctrl_usdhc4>; | |
206 | bus-width = <4>; | |
207 | vmmc-supply = <®_wl18xx_vmmc>; | |
208 | no-1-8-v; | |
209 | non-removable; | |
210 | wakeup-source; | |
211 | keep-power-in-suspend; | |
212 | cap-power-off-card; | |
213 | max-frequency = <25000000>; | |
214 | #address-cells = <1>; | |
215 | #size-cells = <0>; | |
216 | status = "okay"; | |
217 | ||
218 | wlcore: wlcore@2 { | |
219 | compatible = "ti,wl1837"; | |
220 | reg = <2>; | |
221 | interrupt-parent = <&gpio2>; | |
222 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; | |
223 | tcxo-clock-frequency = <26000000>; | |
224 | }; | |
225 | }; |