[deliverable/linux.git] / arch / arm / boot / dts / imx6q-sabrelite.dts

/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
/include/ "imx6q.dtsi"

/ {
	model = "Freescale i.MX6 Quad SABRE Lite Board";
	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";

	memory {
		reg = <0x10000000 0x40000000>;
	};

	soc {
		aips-bus@02000000 { /* AIPS1 */
			spba-bus@02000000 {
				ecspi@02008000 { /* eCSPI1 */
					fsl,spi-num-chipselects = <1>;
					cs-gpios = <&gpio3 19 0>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_ecspi1_1>;
					status = "okay";

					flash: m25p80@0 {
						compatible = "sst,sst25vf016b";
						spi-max-frequency = <20000000>;
						reg = <0>;
					};
				};

				ssi1: ssi@02028000 {
					fsl,mode = "i2s-slave";
					status = "okay";
				};
			};

			iomuxc@020e0000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_hog>;

				hog {
					pinctrl_hog: hoggrp {
						fsl,pins = <
							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
						>;
					};
				};
			};
		};

		aips-bus@02100000 { /* AIPS2 */
			usb@02184000 { /* USB OTG */
				vbus-supply = <&reg_usb_otg_vbus>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usbotg_1>;
				disable-over-current;
				status = "okay";
			};

			usb@02184200 { /* USB1 */
				status = "okay";
			};

			ethernet@02188000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_enet_1>;
				phy-mode = "rgmii";
				phy-reset-gpios = <&gpio3 23 0>;
				status = "okay";
			};

			usdhc@02198000 { /* uSDHC3 */
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usdhc3_2>;
				cd-gpios = <&gpio7 0 0>;
				wp-gpios = <&gpio7 1 0>;
				vmmc-supply = <&reg_3p3v>;
				status = "okay";
			};

			usdhc@0219c000 { /* uSDHC4 */
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usdhc4_2>;
				cd-gpios = <&gpio2 6 0>;
				wp-gpios = <&gpio2 7 0>;
				vmmc-supply = <&reg_3p3v>;
				status = "okay";
			};

			audmux@021d8000 {
				status = "okay";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_audmux_1>;
			};

			uart2: serial@021e8000 {
				status = "okay";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_uart2_1>;
			};

			i2c@021a0000 { /* I2C1 */
				status = "okay";
				clock-frequency = <100000>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_i2c1_1>;

				codec: sgtl5000@0a {
					compatible = "fsl,sgtl5000";
					reg = <0x0a>;
					clocks = <&clks 169>;
					VDDA-supply = <&reg_2p5v>;
					VDDIO-supply = <&reg_3p3v>;
				};
			};
		};
	};

	regulators {
		compatible = "simple-bus";

		reg_2p5v: 2p5v {
			compatible = "regulator-fixed";
			regulator-name = "2P5V";
			regulator-min-microvolt = <2500000>;
			regulator-max-microvolt = <2500000>;
			regulator-always-on;
		};

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: usb_otg_vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 0>;
			enable-active-high;
		};
	};

	sound {
		compatible = "fsl,imx6q-sabrelite-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "imx6q-sabrelite-sgtl5000";
		ssi-controller = <&ssi1>;
		audio-codec = <&codec>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <4>;
	};
};
Commit	Line	Data
3c8276c6 RZ	1	/*
	2	* Copyright 2011 Freescale Semiconductor, Inc.
	3	* Copyright 2011 Linaro Ltd.
	4	*
	5	* The code contained herein is licensed under the GNU General Public
	6	* License. You may obtain a copy of the GNU General Public License
	7	* Version 2 or later at the following locations:
	8	*
	9	* http://www.opensource.org/licenses/gpl-license.html
	10	* http://www.gnu.org/copyleft/gpl.html
	11	*/
	12
	13	/dts-v1/;
	14	/include/ "imx6q.dtsi"
	15
	16	/ {
	17	model = "Freescale i.MX6 Quad SABRE Lite Board";
	18	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
	19
	20	memory {
	21	reg = <0x10000000 0x40000000>;
	22	};
	23
	24	soc {
f07439c4 FE	25	aips-bus@02000000 { /* AIPS1 */
	26	spba-bus@02000000 {
	27	ecspi@02008000 { /* eCSPI1 */
	28	fsl,spi-num-chipselects = <1>;
	29	cs-gpios = <&gpio3 19 0>;
8ad7a305 HW	30	pinctrl-names = "default";
8ad7a305 HW	31	pinctrl-0 = <&pinctrl_ecspi1_1>;
f07439c4 FE	32	status = "okay";
	33
	34	flash: m25p80@0 {
	35	compatible = "sst,sst25vf016b";
	36	spi-max-frequency = <20000000>;
	37	reg = <0>;
	38	};
	39	};
b1a5da8e RZ	40
	41	ssi1: ssi@02028000 {
	42	fsl,mode = "i2s-slave";
	43	status = "okay";
	44	};
f07439c4 FE	45	};
f07439c4 FE	46
74bd88f7 RZ	47	iomuxc@020e0000 {
74bd88f7 RZ	48	pinctrl-names = "default";
f8135a74	49	pinctrl-0 = <&pinctrl_hog>;
74bd88f7	50
f8135a74 FE	51	hog {
f8135a74 FE	52	pinctrl_hog: hoggrp {
74bd88f7	53	fsl,pins = <
99d5f0cc SG	54	1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
99d5f0cc SG	55	1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
44a509fc	56	121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
99d5f0cc SG	57	144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
	58	152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
	59	1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
	60	1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
44a509fc SG	61	953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
44a509fc SG	62	>;
74bd88f7 RZ	63	};
	64	};
	65	};
f07439c4 FE	66	};
f07439c4 FE	67
3c8276c6	68	aips-bus@02100000 { /* AIPS2 */
74bd88f7 RZ	69	usb@02184000 { /* USB OTG */
74bd88f7 RZ	70	vbus-supply = <&reg_usb_otg_vbus>;
97a53092 RZ	71	pinctrl-names = "default";
97a53092 RZ	72	pinctrl-0 = <&pinctrl_usbotg_1>;
28342c61	73	disable-over-current;
74bd88f7 RZ	74	status = "okay";
	75	};
	76
	77	usb@02184200 { /* USB1 */
	78	status = "okay";
	79	};
	80
0c456cfa	81	ethernet@02188000 {
99d5f0cc SG	82	pinctrl-names = "default";
99d5f0cc SG	83	pinctrl-0 = <&pinctrl_enet_1>;
3c8276c6 RZ	84	phy-mode = "rgmii";
	85	phy-reset-gpios = <&gpio3 23 0>;
	86	status = "okay";
	87	};
	88
	89	usdhc@02198000 { /* uSDHC3 */
99d5f0cc SG	90	pinctrl-names = "default";
99d5f0cc SG	91	pinctrl-0 = <&pinctrl_usdhc3_2>;
3c8276c6 RZ	92	cd-gpios = <&gpio7 0 0>;
3c8276c6 RZ	93	wp-gpios = <&gpio7 1 0>;
6f6ea937	94	vmmc-supply = <&reg_3p3v>;
3c8276c6 RZ	95	status = "okay";
	96	};
	97
	98	usdhc@0219c000 { /* uSDHC4 */
99d5f0cc SG	99	pinctrl-names = "default";
99d5f0cc SG	100	pinctrl-0 = <&pinctrl_usdhc4_2>;
3c8276c6 RZ	101	cd-gpios = <&gpio2 6 0>;
3c8276c6 RZ	102	wp-gpios = <&gpio2 7 0>;
6f6ea937	103	vmmc-supply = <&reg_3p3v>;
3c8276c6 RZ	104	status = "okay";
	105	};
	106
f965cd55 RZ	107	audmux@021d8000 {
f965cd55 RZ	108	status = "okay";
5ca65c18 RZ	109	pinctrl-names = "default";
5ca65c18 RZ	110	pinctrl-0 = <&pinctrl_audmux_1>;
f965cd55 RZ	111	};
f965cd55 RZ	112
0c456cfa	113	uart2: serial@021e8000 {
3c8276c6	114	status = "okay";
c3001b2a	115	pinctrl-names = "default";
e30ba89f	116	pinctrl-0 = <&pinctrl_uart2_1>;
3c8276c6	117	};
adcec4ce RZ	118
	119	i2c@021a0000 { /* I2C1 */
	120	status = "okay";
	121	clock-frequency = <100000>;
d99a79fc RZ	122	pinctrl-names = "default";
d99a79fc RZ	123	pinctrl-0 = <&pinctrl_i2c1_1>;
adcec4ce RZ	124
	125	codec: sgtl5000@0a {
	126	compatible = "fsl,sgtl5000";
	127	reg = <0x0a>;
0e87e043	128	clocks = <&clks 169>;
adcec4ce RZ	129	VDDA-supply = <&reg_2p5v>;
	130	VDDIO-supply = <&reg_3p3v>;
	131	};
	132	};
3c8276c6 RZ	133	};
3c8276c6 RZ	134	};
cf37a8ee RZ	135
	136	regulators {
	137	compatible = "simple-bus";
	138
	139	reg_2p5v: 2p5v {
	140	compatible = "regulator-fixed";
	141	regulator-name = "2P5V";
	142	regulator-min-microvolt = <2500000>;
	143	regulator-max-microvolt = <2500000>;
	144	regulator-always-on;
	145	};
	146
	147	reg_3p3v: 3p3v {
	148	compatible = "regulator-fixed";
	149	regulator-name = "3P3V";
	150	regulator-min-microvolt = <3300000>;
	151	regulator-max-microvolt = <3300000>;
	152	regulator-always-on;
	153	};
74bd88f7 RZ	154
	155	reg_usb_otg_vbus: usb_otg_vbus {
	156	compatible = "regulator-fixed";
	157	regulator-name = "usb_otg_vbus";
	158	regulator-min-microvolt = <5000000>;
	159	regulator-max-microvolt = <5000000>;
	160	gpio = <&gpio3 22 0>;
	161	enable-active-high;
	162	};
cf37a8ee	163	};
b7879fe6 RZ	164
	165	sound {
	166	compatible = "fsl,imx6q-sabrelite-sgtl5000",
	167	"fsl,imx-audio-sgtl5000";
	168	model = "imx6q-sabrelite-sgtl5000";
	169	ssi-controller = <&ssi1>;
	170	audio-codec = <&codec>;
	171	audio-routing =
	172	"MIC_IN", "Mic Jack",
	173	"Mic Jack", "Mic Bias",
	174	"Headphone Jack", "HP_OUT";
	175	mux-int-port = <1>;
	176	mux-ext-port = <4>;
	177	};
3c8276c6	178	};