Commit | Line | Data |
---|---|---|
082d33d0 SG |
1 | /* |
2 | * Copyright 2012 Freescale Semiconductor, Inc. | |
3 | * Copyright 2011 Linaro Ltd. | |
4 | * | |
5 | * The code contained herein is licensed under the GNU General Public | |
6 | * License. You may obtain a copy of the GNU General Public License | |
7 | * Version 2 or later at the following locations: | |
8 | * | |
9 | * http://www.opensource.org/licenses/gpl-license.html | |
10 | * http://www.gnu.org/copyleft/gpl.html | |
11 | */ | |
12 | ||
13 | / { | |
14 | memory { | |
15 | reg = <0x10000000 0x40000000>; | |
16 | }; | |
17 | ||
18 | regulators { | |
19 | compatible = "simple-bus"; | |
20 | ||
21 | reg_usb_otg_vbus: usb_otg_vbus { | |
22 | compatible = "regulator-fixed"; | |
23 | regulator-name = "usb_otg_vbus"; | |
24 | regulator-min-microvolt = <5000000>; | |
25 | regulator-max-microvolt = <5000000>; | |
26 | gpio = <&gpio3 22 0>; | |
27 | enable-active-high; | |
28 | }; | |
fdbfb43b | 29 | |
015fa46d PC |
30 | reg_usb_h1_vbus: usb_h1_vbus { |
31 | compatible = "regulator-fixed"; | |
32 | regulator-name = "usb_h1_vbus"; | |
33 | regulator-min-microvolt = <5000000>; | |
34 | regulator-max-microvolt = <5000000>; | |
35 | gpio = <&gpio1 29 0>; | |
36 | enable-active-high; | |
37 | }; | |
38 | ||
fdbfb43b NC |
39 | reg_audio: wm8962_supply { |
40 | compatible = "regulator-fixed"; | |
41 | regulator-name = "wm8962-supply"; | |
42 | gpio = <&gpio4 10 0>; | |
43 | enable-active-high; | |
44 | }; | |
082d33d0 SG |
45 | }; |
46 | ||
47 | gpio-keys { | |
48 | compatible = "gpio-keys"; | |
49 | ||
50 | volume-up { | |
51 | label = "Volume Up"; | |
52 | gpios = <&gpio1 4 0>; | |
6c30640d | 53 | gpio-key,wakeup; |
082d33d0 SG |
54 | linux,code = <115>; /* KEY_VOLUMEUP */ |
55 | }; | |
56 | ||
57 | volume-down { | |
58 | label = "Volume Down"; | |
59 | gpios = <&gpio1 5 0>; | |
6c30640d | 60 | gpio-key,wakeup; |
082d33d0 SG |
61 | linux,code = <114>; /* KEY_VOLUMEDOWN */ |
62 | }; | |
63 | }; | |
77b38fc3 | 64 | |
17b5001b RK |
65 | imx_drm: imx-drm { |
66 | compatible = "fsl,imx-drm"; | |
67 | crtcs = <&ipu1 0>, <&ipu1 1>; | |
68 | connectors = <&ldb>; | |
69 | }; | |
70 | ||
77b38fc3 NC |
71 | sound { |
72 | compatible = "fsl,imx6q-sabresd-wm8962", | |
73 | "fsl,imx-audio-wm8962"; | |
74 | model = "wm8962-audio"; | |
75 | ssi-controller = <&ssi2>; | |
76 | audio-codec = <&codec>; | |
77 | audio-routing = | |
78 | "Headphone Jack", "HPOUTL", | |
79 | "Headphone Jack", "HPOUTR", | |
80 | "Ext Spk", "SPKOUTL", | |
81 | "Ext Spk", "SPKOUTR", | |
82 | "MICBIAS", "AMIC", | |
83 | "IN3R", "MICBIAS", | |
84 | "DMIC", "MICBIAS", | |
85 | "DMICDAT", "DMIC"; | |
86 | mux-int-port = <2>; | |
87 | mux-ext-port = <3>; | |
88 | }; | |
2f35c0c4 RP |
89 | |
90 | backlight { | |
91 | compatible = "pwm-backlight"; | |
92 | pwms = <&pwm1 0 5000000>; | |
93 | brightness-levels = <0 4 8 16 32 64 128 255>; | |
94 | default-brightness-level = <7>; | |
95 | status = "okay"; | |
96 | }; | |
082d33d0 SG |
97 | }; |
98 | ||
48828700 NC |
99 | &audmux { |
100 | pinctrl-names = "default"; | |
101 | pinctrl-0 = <&pinctrl_audmux_2>; | |
102 | status = "okay"; | |
103 | }; | |
104 | ||
9110ede4 HS |
105 | &ecspi1 { |
106 | fsl,spi-num-chipselects = <1>; | |
107 | cs-gpios = <&gpio4 9 0>; | |
108 | pinctrl-names = "default"; | |
109 | pinctrl-0 = <&pinctrl_ecspi1_2>; | |
110 | status = "okay"; | |
111 | ||
112 | flash: m25p80@0 { | |
113 | #address-cells = <1>; | |
114 | #size-cells = <1>; | |
115 | compatible = "st,m25p32"; | |
116 | spi-max-frequency = <20000000>; | |
117 | reg = <0>; | |
118 | }; | |
119 | }; | |
120 | ||
082d33d0 SG |
121 | &fec { |
122 | pinctrl-names = "default"; | |
123 | pinctrl-0 = <&pinctrl_enet_1>; | |
124 | phy-mode = "rgmii"; | |
c5f592d1 | 125 | phy-reset-gpios = <&gpio1 25 0>; |
082d33d0 SG |
126 | status = "okay"; |
127 | }; | |
128 | ||
20426feb NC |
129 | &i2c1 { |
130 | clock-frequency = <100000>; | |
131 | pinctrl-names = "default"; | |
132 | pinctrl-0 = <&pinctrl_i2c1_2>; | |
133 | status = "okay"; | |
134 | ||
135 | codec: wm8962@1a { | |
136 | compatible = "wlf,wm8962"; | |
137 | reg = <0x1a>; | |
a94f8ecb | 138 | clocks = <&clks 201>; |
20426feb NC |
139 | DCVDD-supply = <®_audio>; |
140 | DBVDD-supply = <®_audio>; | |
141 | AVDD-supply = <®_audio>; | |
142 | CPVDD-supply = <®_audio>; | |
143 | MICVDD-supply = <®_audio>; | |
144 | PLLVDD-supply = <®_audio>; | |
145 | SPKVDD1-supply = <®_audio>; | |
146 | SPKVDD2-supply = <®_audio>; | |
147 | gpio-cfg = < | |
148 | 0x0000 /* 0:Default */ | |
149 | 0x0000 /* 1:Default */ | |
150 | 0x0013 /* 2:FN_DMICCLK */ | |
151 | 0x0000 /* 3:Default */ | |
152 | 0x8014 /* 4:FN_DMICCDAT */ | |
153 | 0x0000 /* 5:Default */ | |
154 | >; | |
155 | }; | |
156 | }; | |
157 | ||
38501179 FE |
158 | &i2c3 { |
159 | clock-frequency = <100000>; | |
160 | pinctrl-names = "default"; | |
161 | pinctrl-0 = <&pinctrl_i2c3_2>; | |
162 | status = "okay"; | |
163 | ||
164 | egalax_ts@04 { | |
165 | compatible = "eeti,egalax_ts"; | |
166 | reg = <0x04>; | |
167 | interrupt-parent = <&gpio6>; | |
168 | interrupts = <7 2>; | |
169 | wakeup-gpios = <&gpio6 7 0>; | |
170 | }; | |
171 | }; | |
172 | ||
c56009b2 SG |
173 | &iomuxc { |
174 | pinctrl-names = "default"; | |
175 | pinctrl-0 = <&pinctrl_hog>; | |
176 | ||
177 | hog { | |
178 | pinctrl_hog: hoggrp { | |
179 | fsl,pins = < | |
180 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 | |
181 | MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 | |
182 | MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 | |
183 | MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 | |
184 | MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 | |
185 | MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 | |
186 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 | |
38501179 | 187 | MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 |
015fa46d | 188 | MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 |
e3c68c86 | 189 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 |
c5f592d1 | 190 | MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 |
c56009b2 SG |
191 | >; |
192 | }; | |
193 | }; | |
194 | }; | |
195 | ||
b7fb7105 SG |
196 | &ldb { |
197 | status = "okay"; | |
198 | ||
199 | lvds-channel@1 { | |
200 | fsl,data-mapping = "spwg"; | |
201 | fsl,data-width = <18>; | |
202 | status = "okay"; | |
203 | ||
204 | display-timings { | |
205 | native-mode = <&timing0>; | |
206 | timing0: hsd100pxn1 { | |
207 | clock-frequency = <65000000>; | |
208 | hactive = <1024>; | |
209 | vactive = <768>; | |
210 | hback-porch = <220>; | |
211 | hfront-porch = <40>; | |
212 | vback-porch = <21>; | |
213 | vfront-porch = <7>; | |
214 | hsync-len = <60>; | |
215 | vsync-len = <10>; | |
216 | }; | |
217 | }; | |
218 | }; | |
219 | }; | |
220 | ||
2f35c0c4 RP |
221 | &pwm1 { |
222 | pinctrl-names = "default"; | |
223 | pinctrl-0 = <&pinctrl_pwm0_1>; | |
224 | status = "okay"; | |
225 | }; | |
226 | ||
48828700 NC |
227 | &ssi2 { |
228 | fsl,mode = "i2s-slave"; | |
229 | status = "okay"; | |
230 | }; | |
231 | ||
082d33d0 SG |
232 | &uart1 { |
233 | pinctrl-names = "default"; | |
234 | pinctrl-0 = <&pinctrl_uart1_1>; | |
235 | status = "okay"; | |
236 | }; | |
237 | ||
238 | &usbh1 { | |
015fa46d | 239 | vbus-supply = <®_usb_h1_vbus>; |
082d33d0 SG |
240 | status = "okay"; |
241 | }; | |
242 | ||
243 | &usbotg { | |
244 | vbus-supply = <®_usb_otg_vbus>; | |
245 | pinctrl-names = "default"; | |
246 | pinctrl-0 = <&pinctrl_usbotg_2>; | |
247 | disable-over-current; | |
248 | status = "okay"; | |
249 | }; | |
250 | ||
251 | &usdhc2 { | |
252 | pinctrl-names = "default"; | |
253 | pinctrl-0 = <&pinctrl_usdhc2_1>; | |
e367817a | 254 | bus-width = <8>; |
082d33d0 SG |
255 | cd-gpios = <&gpio2 2 0>; |
256 | wp-gpios = <&gpio2 3 0>; | |
257 | status = "okay"; | |
258 | }; | |
259 | ||
260 | &usdhc3 { | |
261 | pinctrl-names = "default"; | |
262 | pinctrl-0 = <&pinctrl_usdhc3_1>; | |
e367817a | 263 | bus-width = <8>; |
082d33d0 SG |
264 | cd-gpios = <&gpio2 0 0>; |
265 | wp-gpios = <&gpio2 1 0>; | |
266 | status = "okay"; | |
267 | }; |