projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: dts: imx6ul: add gpmi support
[deliverable/linux.git] / arch / arm / boot / dts / imx6ul.dtsi
CommitLineData
a5fcccbc
FL		 1/*
2 * Copyright 2015 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6ul-clock.h>
10#include <dt-bindings/gpio/gpio.h>
89435fea 11#include <dt-bindings/input/input.h>
a5fcccbc
FL		 12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include "imx6ul-pinfunc.h"
14#include "skeleton.dtsi"
15
16/ {
17 aliases {
01f3dc7d
FD		 18 ethernet0 = &fec1;
19 ethernet1 = &fec2;
a5fcccbc
FL		 20 gpio0 = &gpio1;
21 gpio1 = &gpio2;
22 gpio2 = &gpio3;
23 gpio3 = &gpio4;
24 gpio4 = &gpio5;
25 i2c0 = &i2c1;
26 i2c1 = &i2c2;
27 i2c2 = &i2c3;
28 i2c3 = &i2c4;
29 mmc0 = &usdhc1;
30 mmc1 = &usdhc2;
31 serial0 = &uart1;
32 serial1 = &uart2;
33 serial2 = &uart3;
34 serial3 = &uart4;
35 serial4 = &uart5;
36 serial5 = &uart6;
37 serial6 = &uart7;
38 serial7 = &uart8;
39 spi0 = &ecspi1;
40 spi1 = &ecspi2;
41 spi2 = &ecspi3;
42 spi3 = &ecspi4;
43 usbphy0 = &usbphy1;
44 usbphy1 = &usbphy2;
45 };
46
47 cpus {
48 #address-cells = <1>;
49 #size-cells = <0>;
50
51 cpu0: cpu@0 {
52 compatible = "arm,cortex-a7";
53 device_type = "cpu";
54 reg = <0>;
55 clock-latency = <61036>; /* two CLK32 periods */
56 operating-points = <
57 /* kHz uV */
58 528000 1250000
59 396000 1150000
60 198000 1150000
61 >;
62 fsl,soc-operating-points = <
63 /* KHz uV */
64 528000 1250000
65 396000 1150000
66 198000 1150000
67 >;
68 clocks = <&clks IMX6UL_CLK_ARM>,
69 <&clks IMX6UL_CLK_PLL2_BUS>,
70 <&clks IMX6UL_CLK_PLL2_PFD2>,
71 <&clks IMX6UL_CA7_SECONDARY_SEL>,
72 <&clks IMX6UL_CLK_STEP>,
73 <&clks IMX6UL_CLK_PLL1_SW>,
74 <&clks IMX6UL_CLK_PLL1_SYS>,
75 <&clks IMX6UL_PLL1_BYPASS>,
76 <&clks IMX6UL_CLK_PLL1>,
77 <&clks IMX6UL_PLL1_BYPASS_SRC>,
78 <&clks IMX6UL_CLK_OSC>;
79 clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
80 "secondary_sel", "step", "pll1_sw",
81 "pll1_sys", "pll1_bypass", "pll1",
82 "pll1_bypass_src", "osc";
83 arm-supply = <&reg_arm>;
84 soc-supply = <&reg_soc>;
85 };
86 };
87
88 intc: interrupt-controller@00a01000 {
89 compatible = "arm,cortex-a7-gic";
90 #interrupt-cells = <3>;
91 interrupt-controller;
92 reg = <0x00a01000 0x1000>,
93 <0x00a02000 0x1000>,
94 <0x00a04000 0x2000>,
95 <0x00a06000 0x2000>;
96 };
97
98 ckil: clock-cli {
99 compatible = "fixed-clock";
100 #clock-cells = <0>;
101 clock-frequency = <32768>;
102 clock-output-names = "ckil";
103 };
104
105 osc: clock-osc {
106 compatible = "fixed-clock";
107 #clock-cells = <0>;
108 clock-frequency = <24000000>;
109 clock-output-names = "osc";
110 };
111
112 ipp_di0: clock-di0 {
113 compatible = "fixed-clock";
114 #clock-cells = <0>;
115 clock-frequency = <0>;
116 clock-output-names = "ipp_di0";
117 };
118
119 ipp_di1: clock-di1 {
120 compatible = "fixed-clock";
121 #clock-cells = <0>;
122 clock-frequency = <0>;
123 clock-output-names = "ipp_di1";
124 };
125
126 soc {
127 #address-cells = <1>;
128 #size-cells = <1>;
129 compatible = "simple-bus";
18619ff5 130 interrupt-parent = <&gpc>;
a5fcccbc
FL		 131 ranges;
132
133 pmu {
134 compatible = "arm,cortex-a7-pmu";
135 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
136 status = "disabled";
137 };
138
322d09d6
AH		 139 ocram: sram@00900000 {
140 compatible = "mmio-sram";
141 reg = <0x00900000 0x20000>;
142 };
143
7d1cd297
LW		 144 dma_apbh: dma-apbh@01804000 {
145 compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
146 reg = <0x01804000 0x2000>;
147 interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
148 <0 13 IRQ_TYPE_LEVEL_HIGH>,
149 <0 13 IRQ_TYPE_LEVEL_HIGH>,
150 <0 13 IRQ_TYPE_LEVEL_HIGH>;
151 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
152 #dma-cells = <1>;
153 dma-channels = <4>;
154 clocks = <&clks IMX6UL_CLK_APBHDMA>;
155 };
156
157 gpmi: gpmi-nand@01806000 {
158 compatible = "fsl,imx6q-gpmi-nand";
159 #address-cells = <1>;
160 #size-cells = <1>;
161 reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
162 reg-names = "gpmi-nand", "bch";
163 interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
164 interrupt-names = "bch";
165 clocks = <&clks IMX6UL_CLK_GPMI_IO>,
166 <&clks IMX6UL_CLK_GPMI_APB>,
167 <&clks IMX6UL_CLK_GPMI_BCH>,
168 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
169 <&clks IMX6UL_CLK_PER_BCH>;
170 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
171 "gpmi_bch_apb", "per1_bch";
172 dmas = <&dma_apbh 0>;
173 dma-names = "rx-tx";
174 status = "disabled";
175 };
176
a5fcccbc
FL		 177 aips1: aips-bus@02000000 {
178 compatible = "fsl,aips-bus", "simple-bus";
179 #address-cells = <1>;
180 #size-cells = <1>;
181 reg = <0x02000000 0x100000>;
182 ranges;
183
184 spba-bus@02000000 {
185 compatible = "fsl,spba-bus", "simple-bus";
186 #address-cells = <1>;
187 #size-cells = <1>;
188 reg = <0x02000000 0x40000>;
189 ranges;
190
191 ecspi1: ecspi@02008000 {
192 #address-cells = <1>;
193 #size-cells = <0>;
194 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
195 reg = <0x02008000 0x4000>;
196 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
197 clocks = <&clks IMX6UL_CLK_ECSPI1>,
198 <&clks IMX6UL_CLK_ECSPI1>;
199 clock-names = "ipg", "per";
200 status = "disabled";
201 };
202
203 ecspi2: ecspi@0200c000 {
204 #address-cells = <1>;
205 #size-cells = <0>;
206 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
207 reg = <0x0200c000 0x4000>;
208 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
209 clocks = <&clks IMX6UL_CLK_ECSPI2>,
210 <&clks IMX6UL_CLK_ECSPI2>;
211 clock-names = "ipg", "per";
212 status = "disabled";
213 };
214
215 ecspi3: ecspi@02010000 {
216 #address-cells = <1>;
217 #size-cells = <0>;
218 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
219 reg = <0x02010000 0x4000>;
220 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
221 clocks = <&clks IMX6UL_CLK_ECSPI3>,
222 <&clks IMX6UL_CLK_ECSPI3>;
223 clock-names = "ipg", "per";
224 status = "disabled";
225 };
226
227 ecspi4: ecspi@02014000 {
228 #address-cells = <1>;
229 #size-cells = <0>;
230 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
231 reg = <0x02014000 0x4000>;
232 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
233 clocks = <&clks IMX6UL_CLK_ECSPI4>,
234 <&clks IMX6UL_CLK_ECSPI4>;
235 clock-names = "ipg", "per";
236 status = "disabled";
237 };
238
239 uart7: serial@02018000 {
240 compatible = "fsl,imx6ul-uart",
241 "fsl,imx6q-uart";
242 reg = <0x02018000 0x4000>;
243 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
244 clocks = <&clks IMX6UL_CLK_UART7_IPG>,
245 <&clks IMX6UL_CLK_UART7_SERIAL>;
246 clock-names = "ipg", "per";
247 status = "disabled";
248 };
249
250 uart1: serial@02020000 {
251 compatible = "fsl,imx6ul-uart",
252 "fsl,imx6q-uart";
253 reg = <0x02020000 0x4000>;
254 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
255 clocks = <&clks IMX6UL_CLK_UART1_IPG>,
256 <&clks IMX6UL_CLK_UART1_SERIAL>;
257 clock-names = "ipg", "per";
258 status = "disabled";
259 };
260
261 uart8: serial@02024000 {
262 compatible = "fsl,imx6ul-uart",
263 "fsl,imx6q-uart";
264 reg = <0x02024000 0x4000>;
265 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
266 clocks = <&clks IMX6UL_CLK_UART8_IPG>,
267 <&clks IMX6UL_CLK_UART8_SERIAL>;
268 clock-names = "ipg", "per";
269 status = "disabled";
270 };
36e2edf6
LW		 271
272 sai1: sai@02028000 {
273 #sound-dai-cells = <0>;
274 compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
275 reg = <0x02028000 0x4000>;
276 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
277 clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
278 <&clks IMX6UL_CLK_SAI1>,
279 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
280 clock-names = "bus", "mclk1", "mclk2", "mclk3";
281 dmas = <&sdma 35 24 0>,
282 <&sdma 36 24 0>;
283 dma-names = "rx", "tx";
284 status = "disabled";
285 };
286
287 sai2: sai@0202c000 {
288 #sound-dai-cells = <0>;
289 compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
290 reg = <0x0202c000 0x4000>;
291 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
292 clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
293 <&clks IMX6UL_CLK_SAI2>,
294 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
295 clock-names = "bus", "mclk1", "mclk2", "mclk3";
296 dmas = <&sdma 37 24 0>,
297 <&sdma 38 24 0>;
298 dma-names = "rx", "tx";
299 status = "disabled";
300 };
301
302 sai3: sai@02030000 {
303 #sound-dai-cells = <0>;
304 compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
305 reg = <0x02030000 0x4000>;
306 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
307 clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
308 <&clks IMX6UL_CLK_SAI3>,
309 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
310 clock-names = "bus", "mclk1", "mclk2", "mclk3";
311 dmas = <&sdma 39 24 0>,
312 <&sdma 40 24 0>;
313 dma-names = "rx", "tx";
314 status = "disabled";
315 };
a5fcccbc
FL		 316 };
317
302e01b2
LW		 318 tsc: tsc@02040000 {
319 compatible = "fsl,imx6ul-tsc";
320 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
321 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
322 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
323 clocks = <&clks IMX6UL_CLK_IPG>,
324 <&clks IMX6UL_CLK_ADC2>;
325 clock-names = "tsc", "adc";
326 status = "disabled";
327 };
328
b9901fe8
LW		 329 pwm1: pwm@02080000 {
330 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
331 reg = <0x02080000 0x4000>;
332 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
333 clocks = <&clks IMX6UL_CLK_PWM1>,
334 <&clks IMX6UL_CLK_PWM1>;
335 clock-names = "ipg", "per";
336 #pwm-cells = <2>;
337 status = "disabled";
338 };
339
340 pwm2: pwm@02084000 {
341 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
342 reg = <0x02084000 0x4000>;
343 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
344 clocks = <&clks IMX6UL_CLK_PWM2>,
345 <&clks IMX6UL_CLK_PWM2>;
346 clock-names = "ipg", "per";
347 #pwm-cells = <2>;
348 status = "disabled";
349 };
350
351 pwm3: pwm@02088000 {
352 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
353 reg = <0x02088000 0x4000>;
354 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
355 clocks = <&clks IMX6UL_CLK_PWM3>,
356 <&clks IMX6UL_CLK_PWM3>;
357 clock-names = "ipg", "per";
358 #pwm-cells = <2>;
359 status = "disabled";
360 };
361
362 pwm4: pwm@0208c000 {
363 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
364 reg = <0x0208c000 0x4000>;
365 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
366 clocks = <&clks IMX6UL_CLK_PWM4>,
367 <&clks IMX6UL_CLK_PWM4>;
368 clock-names = "ipg", "per";
369 #pwm-cells = <2>;
370 status = "disabled";
371 };
372
c4aac1b1
LW		 373 can1: flexcan@02090000 {
374 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
375 reg = <0x02090000 0x4000>;
376 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
377 clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
378 <&clks IMX6UL_CLK_CAN1_SERIAL>;
379 clock-names = "ipg", "per";
380 status = "disabled";
381 };
382
383 can2: flexcan@02094000 {
384 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
385 reg = <0x02094000 0x4000>;
386 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
387 clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
388 <&clks IMX6UL_CLK_CAN2_SERIAL>;
389 clock-names = "ipg", "per";
390 status = "disabled";
391 };
392
a5fcccbc
FL		 393 gpt1: gpt@02098000 {
394 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
395 reg = <0x02098000 0x4000>;
396 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
397 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
398 <&clks IMX6UL_CLK_GPT1_SERIAL>;
399 clock-names = "ipg", "per";
400 };
401
402 gpio1: gpio@0209c000 {
403 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
404 reg = <0x0209c000 0x4000>;
405 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
406 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
407 gpio-controller;
408 #gpio-cells = <2>;
409 interrupt-controller;
410 #interrupt-cells = <2>;
411 };
412
413 gpio2: gpio@020a0000 {
414 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
415 reg = <0x020a0000 0x4000>;
416 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
417 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
418 gpio-controller;
419 #gpio-cells = <2>;
420 interrupt-controller;
421 #interrupt-cells = <2>;
422 };
423
424 gpio3: gpio@020a4000 {
425 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
426 reg = <0x020a4000 0x4000>;
427 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
428 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
429 gpio-controller;
430 #gpio-cells = <2>;
431 interrupt-controller;
432 #interrupt-cells = <2>;
433 };
434
435 gpio4: gpio@020a8000 {
436 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
437 reg = <0x020a8000 0x4000>;
438 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
439 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
440 gpio-controller;
441 #gpio-cells = <2>;
442 interrupt-controller;
443 #interrupt-cells = <2>;
444 };
445
446 gpio5: gpio@020ac000 {
447 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
448 reg = <0x020ac000 0x4000>;
449 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
450 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
451 gpio-controller;
452 #gpio-cells = <2>;
453 interrupt-controller;
454 #interrupt-cells = <2>;
455 };
456
01f3dc7d
FD		 457 fec2: ethernet@020b4000 {
458 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
459 reg = <0x020b4000 0x4000>;
460 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
461 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
462 clocks = <&clks IMX6UL_CLK_ENET>,
463 <&clks IMX6UL_CLK_ENET_AHB>,
464 <&clks IMX6UL_CLK_ENET_PTP>,
465 <&clks IMX6UL_CLK_ENET2_REF_125M>,
466 <&clks IMX6UL_CLK_ENET2_REF_125M>;
467 clock-names = "ipg", "ahb", "ptp",
468 "enet_clk_ref", "enet_out";
469 fsl,num-tx-queues=<1>;
470 fsl,num-rx-queues=<1>;
471 status = "disabled";
472 };
473
a5fcccbc
FL		 474 wdog1: wdog@020bc000 {
475 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
476 reg = <0x020bc000 0x4000>;
477 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
478 clocks = <&clks IMX6UL_CLK_WDOG1>;
479 };
480
481 wdog2: wdog@020c0000 {
482 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
483 reg = <0x020c0000 0x4000>;
484 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
485 clocks = <&clks IMX6UL_CLK_WDOG2>;
486 status = "disabled";
487 };
488
489 clks: ccm@020c4000 {
490 compatible = "fsl,imx6ul-ccm";
491 reg = <0x020c4000 0x4000>;
492 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
493 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
494 #clock-cells = <1>;
495 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
496 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
497 };
498
499 anatop: anatop@020c8000 {
500 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
501 "syscon", "simple-bus";
502 reg = <0x020c8000 0x1000>;
503 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
504 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
505 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
506
507 reg_3p0: regulator-3p0@120 {
508 compatible = "fsl,anatop-regulator";
509 regulator-name = "vdd3p0";
510 regulator-min-microvolt = <2625000>;
511 regulator-max-microvolt = <3400000>;
512 anatop-reg-offset = <0x120>;
513 anatop-vol-bit-shift = <8>;
514 anatop-vol-bit-width = <5>;
515 anatop-min-bit-val = <0>;
516 anatop-min-voltage = <2625000>;
517 anatop-max-voltage = <3400000>;
518 anatop-enable-bit = <0>;
519 };
520
521 reg_arm: regulator-vddcore@140 {
522 compatible = "fsl,anatop-regulator";
523 regulator-name = "cpu";
524 regulator-min-microvolt = <725000>;
525 regulator-max-microvolt = <1450000>;
526 regulator-always-on;
527 anatop-reg-offset = <0x140>;
528 anatop-vol-bit-shift = <0>;
529 anatop-vol-bit-width = <5>;
530 anatop-delay-reg-offset = <0x170>;
531 anatop-delay-bit-shift = <24>;
532 anatop-delay-bit-width = <2>;
533 anatop-min-bit-val = <1>;
534 anatop-min-voltage = <725000>;
535 anatop-max-voltage = <1450000>;
536 };
537
538 reg_soc: regulator-vddsoc@140 {
539 compatible = "fsl,anatop-regulator";
540 regulator-name = "vddsoc";
541 regulator-min-microvolt = <725000>;
542 regulator-max-microvolt = <1450000>;
543 regulator-always-on;
544 anatop-reg-offset = <0x140>;
545 anatop-vol-bit-shift = <18>;
546 anatop-vol-bit-width = <5>;
547 anatop-delay-reg-offset = <0x170>;
548 anatop-delay-bit-shift = <28>;
549 anatop-delay-bit-width = <2>;
550 anatop-min-bit-val = <1>;
551 anatop-min-voltage = <725000>;
552 anatop-max-voltage = <1450000>;
553 };
554 };
555
556 usbphy1: usbphy@020c9000 {
557 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
558 reg = <0x020c9000 0x1000>;
559 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
560 clocks = <&clks IMX6UL_CLK_USBPHY1>;
561 phy-3p0-supply = <&reg_3p0>;
562 fsl,anatop = <&anatop>;
563 };
564
565 usbphy2: usbphy@020ca000 {
566 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
567 reg = <0x020ca000 0x1000>;
568 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
569 clocks = <&clks IMX6UL_CLK_USBPHY2>;
570 phy-3p0-supply = <&reg_3p0>;
571 fsl,anatop = <&anatop>;
572 };
573
5b032872
AH		 574 snvs: snvs@020cc000 {
575 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
576 reg = <0x020cc000 0x4000>;
577
578 snvs_rtc: snvs-rtc-lp {
579 compatible = "fsl,sec-v4.0-mon-rtc-lp";
580 regmap = <&snvs>;
581 offset = <0x34>;
582 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
583 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
584 };
36032575 585
ab0a05d8
AH		 586 snvs_poweroff: snvs-poweroff {
587 compatible = "syscon-poweroff";
588 regmap = <&snvs>;
589 offset = <0x38>;
590 mask = <0x60>;
591 status = "disabled";
592 };
593
36032575
AH		 594 snvs_pwrkey: snvs-powerkey {
595 compatible = "fsl,sec-v4.0-pwrkey";
596 regmap = <&snvs>;
597 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
598 linux,keycode = <KEY_POWER>;
599 wakeup-source;
600 };
5b032872
AH		 601 };
602
a5fcccbc
FL		 603 epit1: epit@020d0000 {
604 reg = <0x020d0000 0x4000>;
605 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
606 };
607
608 epit2: epit@020d4000 {
609 reg = <0x020d4000 0x4000>;
610 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
611 };
612
613 src: src@020d8000 {
614 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
615 reg = <0x020d8000 0x4000>;
616 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
617 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
618 #reset-cells = <1>;
619 };
620
621 gpc: gpc@020dc000 {
622 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
623 reg = <0x020dc000 0x4000>;
18619ff5
AH		 624 interrupt-controller;
625 #interrupt-cells = <3>;
a5fcccbc 626 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
18619ff5 627 interrupt-parent = <&intc>;
a5fcccbc
FL		 628 };
629
630 iomuxc: iomuxc@020e0000 {
631 compatible = "fsl,imx6ul-iomuxc";
632 reg = <0x020e0000 0x4000>;
633 };
634
635 gpr: iomuxc-gpr@020e4000 {
636 compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
637 reg = <0x020e4000 0x4000>;
638 };
639
640 gpt2: gpt@020e8000 {
641 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
642 reg = <0x020e8000 0x4000>;
643 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
d97ca99f
LW		 644 clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
645 <&clks IMX6UL_CLK_GPT2_SERIAL>;
a5fcccbc
FL		 646 clock-names = "ipg", "per";
647 };
648
76758c6a
LW		 649 sdma: sdma@020ec000 {
650 compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
651 "fsl,imx35-sdma";
652 reg = <0x020ec000 0x4000>;
653 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
654 clocks = <&clks IMX6UL_CLK_SDMA>,
655 <&clks IMX6UL_CLK_SDMA>;
656 clock-names = "ipg", "ahb";
657 #dma-cells = <3>;
658 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
659 };
660
a5fcccbc
FL		 661 pwm5: pwm@020f0000 {
662 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
663 reg = <0x020f0000 0x4000>;
664 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
c530d23a
LW		 665 clocks = <&clks IMX6UL_CLK_PWM5>,
666 <&clks IMX6UL_CLK_PWM5>;
a5fcccbc
FL		 667 clock-names = "ipg", "per";
668 #pwm-cells = <2>;
dd135095 669 status = "disabled";
a5fcccbc
FL		 670 };
671
672 pwm6: pwm@020f4000 {
673 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
674 reg = <0x020f4000 0x4000>;
675 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
c530d23a
LW		 676 clocks = <&clks IMX6UL_CLK_PWM6>,
677 <&clks IMX6UL_CLK_PWM6>;
a5fcccbc
FL		 678 clock-names = "ipg", "per";
679 #pwm-cells = <2>;
dd135095 680 status = "disabled";
a5fcccbc
FL		 681 };
682
683 pwm7: pwm@020f8000 {
684 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
685 reg = <0x020f8000 0x4000>;
686 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
c530d23a
LW		 687 clocks = <&clks IMX6UL_CLK_PWM7>,
688 <&clks IMX6UL_CLK_PWM7>;
a5fcccbc
FL		 689 clock-names = "ipg", "per";
690 #pwm-cells = <2>;
dd135095 691 status = "disabled";
a5fcccbc
FL		 692 };
693
694 pwm8: pwm@020fc000 {
695 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
696 reg = <0x020fc000 0x4000>;
697 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
c530d23a
LW		 698 clocks = <&clks IMX6UL_CLK_PWM8>,
699 <&clks IMX6UL_CLK_PWM8>;
a5fcccbc
FL		 700 clock-names = "ipg", "per";
701 #pwm-cells = <2>;
dd135095 702 status = "disabled";
a5fcccbc
FL		 703 };
704 };
705
706 aips2: aips-bus@02100000 {
707 compatible = "fsl,aips-bus", "simple-bus";
708 #address-cells = <1>;
709 #size-cells = <1>;
710 reg = <0x02100000 0x100000>;
711 ranges;
712
cad2cb69
FL		 713 usbotg1: usb@02184000 {
714 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
715 reg = <0x02184000 0x200>;
716 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
717 clocks = <&clks IMX6UL_CLK_USBOH3>;
718 fsl,usbphy = <&usbphy1>;
719 fsl,usbmisc = <&usbmisc 0>;
720 fsl,anatop = <&anatop>;
9493bf54 721 ahb-burst-config = <0x0>;
2b1a40e8
PC		 722 tx-burst-size-dword = <0x10>;
723 rx-burst-size-dword = <0x10>;
cad2cb69
FL		 724 status = "disabled";
725 };
726
727 usbotg2: usb@02184200 {
728 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
729 reg = <0x02184200 0x200>;
730 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
731 clocks = <&clks IMX6UL_CLK_USBOH3>;
732 fsl,usbphy = <&usbphy2>;
733 fsl,usbmisc = <&usbmisc 1>;
9493bf54 734 ahb-burst-config = <0x0>;
2b1a40e8
PC		 735 tx-burst-size-dword = <0x10>;
736 rx-burst-size-dword = <0x10>;
cad2cb69
FL		 737 status = "disabled";
738 };
739
740 usbmisc: usbmisc@02184800 {
741 #index-cells = <1>;
742 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
743 reg = <0x02184800 0x200>;
744 };
745
01f3dc7d
FD		 746 fec1: ethernet@02188000 {
747 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
748 reg = <0x02188000 0x4000>;
749 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
750 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
751 clocks = <&clks IMX6UL_CLK_ENET>,
752 <&clks IMX6UL_CLK_ENET_AHB>,
753 <&clks IMX6UL_CLK_ENET_PTP>,
754 <&clks IMX6UL_CLK_ENET_REF>,
755 <&clks IMX6UL_CLK_ENET_REF>;
756 clock-names = "ipg", "ahb", "ptp",
757 "enet_clk_ref", "enet_out";
758 fsl,num-tx-queues=<1>;
759 fsl,num-rx-queues=<1>;
760 status = "disabled";
761 };
762
a5fcccbc
FL		 763 usdhc1: usdhc@02190000 {
764 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
765 reg = <0x02190000 0x4000>;
766 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
767 clocks = <&clks IMX6UL_CLK_USDHC1>,
768 <&clks IMX6UL_CLK_USDHC1>,
769 <&clks IMX6UL_CLK_USDHC1>;
770 clock-names = "ipg", "ahb", "per";
771 bus-width = <4>;
772 status = "disabled";
773 };
774
775 usdhc2: usdhc@02194000 {
776 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
777 reg = <0x02194000 0x4000>;
778 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
779 clocks = <&clks IMX6UL_CLK_USDHC2>,
780 <&clks IMX6UL_CLK_USDHC2>,
781 <&clks IMX6UL_CLK_USDHC2>;
782 clock-names = "ipg", "ahb", "per";
783 bus-width = <4>;
784 status = "disabled";
785 };
786
aab8ec0c
FE		 787 adc1: adc@02198000 {
788 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
789 reg = <0x02198000 0x4000>;
790 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
791 clocks = <&clks IMX6UL_CLK_ADC1>;
792 num-channels = <2>;
793 clock-names = "adc";
794 fsl,adck-max-frequency = <30000000>, <40000000>,
795 <20000000>;
796 status = "disabled";
797 };
798
a5fcccbc
FL		 799 i2c1: i2c@021a0000 {
800 #address-cells = <1>;
801 #size-cells = <0>;
802 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
803 reg = <0x021a0000 0x4000>;
804 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
805 clocks = <&clks IMX6UL_CLK_I2C1>;
806 status = "disabled";
807 };
808
809 i2c2: i2c@021a4000 {
810 #address-cells = <1>;
811 #size-cells = <0>;
812 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
813 reg = <0x021a4000 0x4000>;
814 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
815 clocks = <&clks IMX6UL_CLK_I2C2>;
816 status = "disabled";
817 };
818
819 i2c3: i2c@021a8000 {
820 #address-cells = <1>;
821 #size-cells = <0>;
822 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
823 reg = <0x021a8000 0x4000>;
824 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
825 clocks = <&clks IMX6UL_CLK_I2C3>;
826 status = "disabled";
827 };
828
51a37443
AH		 829 mmdc: mmdc@021b0000 {
830 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
831 reg = <0x021b0000 0x4000>;
832 };
833
6fe01eb7
LW		 834 lcdif: lcdif@021c8000 {
835 compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
836 reg = <0x021c8000 0x4000>;
837 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
838 clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
839 <&clks IMX6UL_CLK_LCDIF_APB>,
840 <&clks IMX6UL_CLK_DUMMY>;
841 clock-names = "pix", "axi", "disp_axi";
842 status = "disabled";
843 };
844
5ff807a5
FL		 845 qspi: qspi@021e0000 {
846 #address-cells = <1>;
847 #size-cells = <0>;
848 compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
849 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
850 reg-names = "QuadSPI", "QuadSPI-memory";
851 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
852 clocks = <&clks IMX6UL_CLK_QSPI>,
853 <&clks IMX6UL_CLK_QSPI>;
854 clock-names = "qspi_en", "qspi";
855 status = "disabled";
856 };
857
a5fcccbc
FL		 858 uart2: serial@021e8000 {
859 compatible = "fsl,imx6ul-uart",
860 "fsl,imx6q-uart";
861 reg = <0x021e8000 0x4000>;
862 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
863 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
864 <&clks IMX6UL_CLK_UART2_SERIAL>;
865 clock-names = "ipg", "per";
866 status = "disabled";
867 };
868
869 uart3: serial@021ec000 {
870 compatible = "fsl,imx6ul-uart",
871 "fsl,imx6q-uart";
872 reg = <0x021ec000 0x4000>;
873 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
874 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
875 <&clks IMX6UL_CLK_UART3_SERIAL>;
876 clock-names = "ipg", "per";
877 status = "disabled";
878 };
879
880 uart4: serial@021f0000 {
881 compatible = "fsl,imx6ul-uart",
882 "fsl,imx6q-uart";
883 reg = <0x021f0000 0x4000>;
884 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
885 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
886 <&clks IMX6UL_CLK_UART4_SERIAL>;
887 clock-names = "ipg", "per";
888 status = "disabled";
889 };
890
891 uart5: serial@021f4000 {
892 compatible = "fsl,imx6ul-uart",
893 "fsl,imx6q-uart";
894 reg = <0x021f4000 0x4000>;
895 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
896 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
897 <&clks IMX6UL_CLK_UART5_SERIAL>;
898 clock-names = "ipg", "per";
899 status = "disabled";
900 };
901
902 i2c4: i2c@021f8000 {
903 #address-cells = <1>;
904 #size-cells = <0>;
905 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
906 reg = <0x021f8000 0x4000>;
907 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
908 clocks = <&clks IMX6UL_CLK_I2C4>;
909 status = "disabled";
910 };
911
912 uart6: serial@021fc000 {
913 compatible = "fsl,imx6ul-uart",
914 "fsl,imx6q-uart";
915 reg = <0x021fc000 0x4000>;
916 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
917 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
918 <&clks IMX6UL_CLK_UART6_SERIAL>;
919 clock-names = "ipg", "per";
920 status = "disabled";
921 };
922 };
923 };
924};
Linux kernel - Deliverables
This page took 0.089697 seconds and 5 git commands to generate.