[deliverable/linux.git] / arch / arm / boot / dts / imx6ul.dtsi

/*
 * Copyright 2015 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <dt-bindings/clock/imx6ul-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6ul-pinfunc.h"
#include "skeleton.dtsi"

/ {
	aliases {
		ethernet0 = &fec1;
		ethernet1 = &fec2;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
		gpio4 = &gpio5;
		i2c0 = &i2c1;
		i2c1 = &i2c2;
		i2c2 = &i2c3;
		i2c3 = &i2c4;
		mmc0 = &usdhc1;
		mmc1 = &usdhc2;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		serial5 = &uart6;
		serial6 = &uart7;
		serial7 = &uart8;
		spi0 = &ecspi1;
		spi1 = &ecspi2;
		spi2 = &ecspi3;
		spi3 = &ecspi4;
		usbphy0 = &usbphy1;
		usbphy1 = &usbphy2;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			reg = <0>;
			clock-latency = <61036>; /* two CLK32 periods */
			operating-points = <
				/* kHz	uV */
				528000	1250000
				396000	1150000
				198000	1150000
			>;
			fsl,soc-operating-points = <
				/* KHz	uV */
				528000	1250000
				396000	1150000
				198000	1150000
			>;
			clocks = <&clks IMX6UL_CLK_ARM>,
				 <&clks IMX6UL_CLK_PLL2_BUS>,
				 <&clks IMX6UL_CLK_PLL2_PFD2>,
				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
				 <&clks IMX6UL_CLK_STEP>,
				 <&clks IMX6UL_CLK_PLL1_SW>,
				 <&clks IMX6UL_CLK_PLL1_SYS>,
				 <&clks IMX6UL_PLL1_BYPASS>,
				 <&clks IMX6UL_CLK_PLL1>,
				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
				 <&clks IMX6UL_CLK_OSC>;
			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
				      "secondary_sel", "step", "pll1_sw",
				      "pll1_sys", "pll1_bypass", "pll1",
				      "pll1_bypass_src", "osc";
			arm-supply = <&reg_arm>;
			soc-supply = <&reg_soc>;
		};
	};

	intc: interrupt-controller@00a01000 {
		compatible = "arm,cortex-a7-gic";
		#interrupt-cells = <3>;
		interrupt-controller;
		reg = <0x00a01000 0x1000>,
		      <0x00a02000 0x1000>,
		      <0x00a04000 0x2000>,
		      <0x00a06000 0x2000>;
	};

	ckil: clock-cli {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <32768>;
		clock-output-names = "ckil";
	};

	osc: clock-osc {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <24000000>;
		clock-output-names = "osc";
	};

	ipp_di0: clock-di0 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <0>;
		clock-output-names = "ipp_di0";
	};

	ipp_di1: clock-di1 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <0>;
		clock-output-names = "ipp_di1";
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&gpc>;
		ranges;

		pmu {
			compatible = "arm,cortex-a7-pmu";
			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		ocram: sram@00900000 {
			compatible = "mmio-sram";
			reg = <0x00900000 0x20000>;
		};

		aips1: aips-bus@02000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x02000000 0x100000>;
			ranges;

			spba-bus@02000000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x02000000 0x40000>;
				ranges;

				ecspi1: ecspi@02008000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
					reg = <0x02008000 0x4000>;
					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_ECSPI1>,
						 <&clks IMX6UL_CLK_ECSPI1>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				ecspi2: ecspi@0200c000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
					reg = <0x0200c000 0x4000>;
					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_ECSPI2>,
						 <&clks IMX6UL_CLK_ECSPI2>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				ecspi3: ecspi@02010000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
					reg = <0x02010000 0x4000>;
					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_ECSPI3>,
						 <&clks IMX6UL_CLK_ECSPI3>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				ecspi4: ecspi@02014000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
					reg = <0x02014000 0x4000>;
					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_ECSPI4>,
						 <&clks IMX6UL_CLK_ECSPI4>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				uart7: serial@02018000 {
					compatible = "fsl,imx6ul-uart",
						     "fsl,imx6q-uart";
					reg = <0x02018000 0x4000>;
					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
						 <&clks IMX6UL_CLK_UART7_SERIAL>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				uart1: serial@02020000 {
					compatible = "fsl,imx6ul-uart",
						     "fsl,imx6q-uart";
					reg = <0x02020000 0x4000>;
					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
						 <&clks IMX6UL_CLK_UART1_SERIAL>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				uart8: serial@02024000 {
					compatible = "fsl,imx6ul-uart",
						     "fsl,imx6q-uart";
					reg = <0x02024000 0x4000>;
					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
						 <&clks IMX6UL_CLK_UART8_SERIAL>;
					clock-names = "ipg", "per";
					status = "disabled";
				};
			};

			gpt1: gpt@02098000 {
				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
				reg = <0x02098000 0x4000>;
				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
				clock-names = "ipg", "per";
			};

			gpio1: gpio@0209c000 {
				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
				reg = <0x0209c000 0x4000>;
				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@020a0000 {
				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
				reg = <0x020a0000 0x4000>;
				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio3: gpio@020a4000 {
				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
				reg = <0x020a4000 0x4000>;
				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio4: gpio@020a8000 {
				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
				reg = <0x020a8000 0x4000>;
				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio5: gpio@020ac000 {
				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
				reg = <0x020ac000 0x4000>;
				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			fec2: ethernet@020b4000 {
				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
				reg = <0x020b4000 0x4000>;
				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_ENET>,
					 <&clks IMX6UL_CLK_ENET_AHB>,
					 <&clks IMX6UL_CLK_ENET_PTP>,
					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
				clock-names = "ipg", "ahb", "ptp",
					      "enet_clk_ref", "enet_out";
				fsl,num-tx-queues=<1>;
				fsl,num-rx-queues=<1>;
				status = "disabled";
			};

			wdog1: wdog@020bc000 {
				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
				reg = <0x020bc000 0x4000>;
				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_WDOG1>;
			};

			wdog2: wdog@020c0000 {
				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
				reg = <0x020c0000 0x4000>;
				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_WDOG2>;
				status = "disabled";
			};

			clks: ccm@020c4000 {
				compatible = "fsl,imx6ul-ccm";
				reg = <0x020c4000 0x4000>;
				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
				#clock-cells = <1>;
				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
			};

			anatop: anatop@020c8000 {
				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
					     "syscon", "simple-bus";
				reg = <0x020c8000 0x1000>;
				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;

				reg_3p0: regulator-3p0@120 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vdd3p0";
					regulator-min-microvolt = <2625000>;
					regulator-max-microvolt = <3400000>;
					anatop-reg-offset = <0x120>;
					anatop-vol-bit-shift = <8>;
					anatop-vol-bit-width = <5>;
					anatop-min-bit-val = <0>;
					anatop-min-voltage = <2625000>;
					anatop-max-voltage = <3400000>;
					anatop-enable-bit = <0>;
				};

				reg_arm: regulator-vddcore@140 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "cpu";
					regulator-min-microvolt = <725000>;
					regulator-max-microvolt = <1450000>;
					regulator-always-on;
					anatop-reg-offset = <0x140>;
					anatop-vol-bit-shift = <0>;
					anatop-vol-bit-width = <5>;
					anatop-delay-reg-offset = <0x170>;
					anatop-delay-bit-shift = <24>;
					anatop-delay-bit-width = <2>;
					anatop-min-bit-val = <1>;
					anatop-min-voltage = <725000>;
					anatop-max-voltage = <1450000>;
				};

				reg_soc: regulator-vddsoc@140 {
					compatible = "fsl,anatop-regulator";
					regulator-name = "vddsoc";
					regulator-min-microvolt = <725000>;
					regulator-max-microvolt = <1450000>;
					regulator-always-on;
					anatop-reg-offset = <0x140>;
					anatop-vol-bit-shift = <18>;
					anatop-vol-bit-width = <5>;
					anatop-delay-reg-offset = <0x170>;
					anatop-delay-bit-shift = <28>;
					anatop-delay-bit-width = <2>;
					anatop-min-bit-val = <1>;
					anatop-min-voltage = <725000>;
					anatop-max-voltage = <1450000>;
				};
			};

			usbphy1: usbphy@020c9000 {
				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
				reg = <0x020c9000 0x1000>;
				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USBPHY1>;
				phy-3p0-supply = <&reg_3p0>;
				fsl,anatop = <&anatop>;
			};

			usbphy2: usbphy@020ca000 {
				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
				reg = <0x020ca000 0x1000>;
				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USBPHY2>;
				phy-3p0-supply = <&reg_3p0>;
				fsl,anatop = <&anatop>;
			};

			snvs: snvs@020cc000 {
				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
				reg = <0x020cc000 0x4000>;

				snvs_rtc: snvs-rtc-lp {
					compatible = "fsl,sec-v4.0-mon-rtc-lp";
					regmap = <&snvs>;
					offset = <0x34>;
					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
				};

				snvs_poweroff: snvs-poweroff {
					compatible = "syscon-poweroff";
					regmap = <&snvs>;
					offset = <0x38>;
					mask = <0x60>;
					status = "disabled";
				};

				snvs_pwrkey: snvs-powerkey {
					compatible = "fsl,sec-v4.0-pwrkey";
					regmap = <&snvs>;
					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
					linux,keycode = <KEY_POWER>;
					wakeup-source;
				};
			};

			epit1: epit@020d0000 {
				reg = <0x020d0000 0x4000>;
				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
			};

			epit2: epit@020d4000 {
				reg = <0x020d4000 0x4000>;
				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
			};

			src: src@020d8000 {
				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
				reg = <0x020d8000 0x4000>;
				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
				#reset-cells = <1>;
			};

			gpc: gpc@020dc000 {
				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
				reg = <0x020dc000 0x4000>;
				interrupt-controller;
				#interrupt-cells = <3>;
				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-parent = <&intc>;
			};

			iomuxc: iomuxc@020e0000 {
				compatible = "fsl,imx6ul-iomuxc";
				reg = <0x020e0000 0x4000>;
			};

			gpr: iomuxc-gpr@020e4000 {
				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
				reg = <0x020e4000 0x4000>;
			};

			gpt2: gpt@020e8000 {
				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
				reg = <0x020e8000 0x4000>;
				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_DUMMY>,
					 <&clks IMX6UL_CLK_DUMMY>;
				clock-names = "ipg", "per";
			};

			pwm5: pwm@020f0000 {
				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
				reg = <0x020f0000 0x4000>;
				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_DUMMY>,
					 <&clks IMX6UL_CLK_DUMMY>;
				clock-names = "ipg", "per";
				#pwm-cells = <2>;
			};

			pwm6: pwm@020f4000 {
				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
				reg = <0x020f4000 0x4000>;
				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_DUMMY>,
					 <&clks IMX6UL_CLK_DUMMY>;
				clock-names = "ipg", "per";
				#pwm-cells = <2>;
			};

			pwm7: pwm@020f8000 {
				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
				reg = <0x020f8000 0x4000>;
				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_DUMMY>,
					 <&clks IMX6UL_CLK_DUMMY>;
				clock-names = "ipg", "per";
				#pwm-cells = <2>;
			};

			pwm8: pwm@020fc000 {
				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
				reg = <0x020fc000 0x4000>;
				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_DUMMY>,
					 <&clks IMX6UL_CLK_DUMMY>;
				clock-names = "ipg", "per";
				#pwm-cells = <2>;
			};
		};

		aips2: aips-bus@02100000 {
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x02100000 0x100000>;
			ranges;

			usbotg1: usb@02184000 {
				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
				reg = <0x02184000 0x200>;
				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USBOH3>;
				fsl,usbphy = <&usbphy1>;
				fsl,usbmisc = <&usbmisc 0>;
				fsl,anatop = <&anatop>;
				ahb-burst-config = <0x0>;
				tx-burst-size-dword = <0x10>;
				rx-burst-size-dword = <0x10>;
				status = "disabled";
			};

			usbotg2: usb@02184200 {
				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
				reg = <0x02184200 0x200>;
				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USBOH3>;
				fsl,usbphy = <&usbphy2>;
				fsl,usbmisc = <&usbmisc 1>;
				ahb-burst-config = <0x0>;
				tx-burst-size-dword = <0x10>;
				rx-burst-size-dword = <0x10>;
				status = "disabled";
			};

			usbmisc: usbmisc@02184800 {
				#index-cells = <1>;
				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
				reg = <0x02184800 0x200>;
			};

			fec1: ethernet@02188000 {
				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
				reg = <0x02188000 0x4000>;
				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_ENET>,
					 <&clks IMX6UL_CLK_ENET_AHB>,
					 <&clks IMX6UL_CLK_ENET_PTP>,
					 <&clks IMX6UL_CLK_ENET_REF>,
					 <&clks IMX6UL_CLK_ENET_REF>;
				clock-names = "ipg", "ahb", "ptp",
					      "enet_clk_ref", "enet_out";
				fsl,num-tx-queues=<1>;
				fsl,num-rx-queues=<1>;
				status = "disabled";
			};

			tsc: tsc@02040000 {
				compatible = "fsl,imx6ul-tsc";
				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_IPG>,
					 <&clks IMX6UL_CLK_ADC2>;
				clock-names = "tsc", "adc";
				status = "disabled";
			};

			usdhc1: usdhc@02190000 {
				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
				reg = <0x02190000 0x4000>;
				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USDHC1>,
					 <&clks IMX6UL_CLK_USDHC1>,
					 <&clks IMX6UL_CLK_USDHC1>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			usdhc2: usdhc@02194000 {
				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
				reg = <0x02194000 0x4000>;
				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_USDHC2>,
					 <&clks IMX6UL_CLK_USDHC2>,
					 <&clks IMX6UL_CLK_USDHC2>;
				clock-names = "ipg", "ahb", "per";
				bus-width = <4>;
				status = "disabled";
			};

			adc1: adc@02198000 {
				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
				reg = <0x02198000 0x4000>;
				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_ADC1>;
				num-channels = <2>;
				clock-names = "adc";
				fsl,adck-max-frequency = <30000000>, <40000000>,
							 <20000000>;
				status = "disabled";
			};

			i2c1: i2c@021a0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
				reg = <0x021a0000 0x4000>;
				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_I2C1>;
				status = "disabled";
			};

			i2c2: i2c@021a4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
				reg = <0x021a4000 0x4000>;
				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_I2C2>;
				status = "disabled";
			};

			i2c3: i2c@021a8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
				reg = <0x021a8000 0x4000>;
				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_I2C3>;
				status = "disabled";
			};

			mmdc: mmdc@021b0000 {
				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
				reg = <0x021b0000 0x4000>;
			};

			qspi: qspi@021e0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
				reg-names = "QuadSPI", "QuadSPI-memory";
				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_QSPI>,
					 <&clks IMX6UL_CLK_QSPI>;
				clock-names = "qspi_en", "qspi";
				status = "disabled";
			};

			uart2: serial@021e8000 {
				compatible = "fsl,imx6ul-uart",
					     "fsl,imx6q-uart";
				reg = <0x021e8000 0x4000>;
				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
					 <&clks IMX6UL_CLK_UART2_SERIAL>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart3: serial@021ec000 {
				compatible = "fsl,imx6ul-uart",
					     "fsl,imx6q-uart";
				reg = <0x021ec000 0x4000>;
				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
					 <&clks IMX6UL_CLK_UART3_SERIAL>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart4: serial@021f0000 {
				compatible = "fsl,imx6ul-uart",
					     "fsl,imx6q-uart";
				reg = <0x021f0000 0x4000>;
				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
					 <&clks IMX6UL_CLK_UART4_SERIAL>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart5: serial@021f4000 {
				compatible = "fsl,imx6ul-uart",
					     "fsl,imx6q-uart";
				reg = <0x021f4000 0x4000>;
				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
					 <&clks IMX6UL_CLK_UART5_SERIAL>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			i2c4: i2c@021f8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
				reg = <0x021f8000 0x4000>;
				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_I2C4>;
				status = "disabled";
			};

			uart6: serial@021fc000 {
				compatible = "fsl,imx6ul-uart",
					     "fsl,imx6q-uart";
				reg = <0x021fc000 0x4000>;
				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
					 <&clks IMX6UL_CLK_UART6_SERIAL>;
				clock-names = "ipg", "per";
				status = "disabled";
			};
		};
	};
};
Commit	Line	Data
a5fcccbc FL	1	/*
	2	* Copyright 2015 Freescale Semiconductor, Inc.
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8
	9	#include <dt-bindings/clock/imx6ul-clock.h>
	10	#include <dt-bindings/gpio/gpio.h>
	11	#include <dt-bindings/interrupt-controller/arm-gic.h>
	12	#include "imx6ul-pinfunc.h"
	13	#include "skeleton.dtsi"
	14
	15	/ {
	16	aliases {
01f3dc7d FD	17	ethernet0 = &fec1;
01f3dc7d FD	18	ethernet1 = &fec2;
a5fcccbc FL	19	gpio0 = &gpio1;
	20	gpio1 = &gpio2;
	21	gpio2 = &gpio3;
	22	gpio3 = &gpio4;
	23	gpio4 = &gpio5;
	24	i2c0 = &i2c1;
	25	i2c1 = &i2c2;
	26	i2c2 = &i2c3;
	27	i2c3 = &i2c4;
	28	mmc0 = &usdhc1;
	29	mmc1 = &usdhc2;
	30	serial0 = &uart1;
	31	serial1 = &uart2;
	32	serial2 = &uart3;
	33	serial3 = &uart4;
	34	serial4 = &uart5;
	35	serial5 = &uart6;
	36	serial6 = &uart7;
	37	serial7 = &uart8;
	38	spi0 = &ecspi1;
	39	spi1 = &ecspi2;
	40	spi2 = &ecspi3;
	41	spi3 = &ecspi4;
	42	usbphy0 = &usbphy1;
	43	usbphy1 = &usbphy2;
	44	};
	45
	46	cpus {
	47	#address-cells = <1>;
	48	#size-cells = <0>;
	49
	50	cpu0: cpu@0 {
	51	compatible = "arm,cortex-a7";
	52	device_type = "cpu";
	53	reg = <0>;
	54	clock-latency = <61036>; /* two CLK32 periods */
	55	operating-points = <
	56	/* kHz uV */
	57	528000 1250000
	58	396000 1150000
	59	198000 1150000
	60	>;
	61	fsl,soc-operating-points = <
	62	/* KHz uV */
	63	528000 1250000
	64	396000 1150000
	65	198000 1150000
	66	>;
	67	clocks = <&clks IMX6UL_CLK_ARM>,
	68	<&clks IMX6UL_CLK_PLL2_BUS>,
	69	<&clks IMX6UL_CLK_PLL2_PFD2>,
	70	<&clks IMX6UL_CA7_SECONDARY_SEL>,
	71	<&clks IMX6UL_CLK_STEP>,
	72	<&clks IMX6UL_CLK_PLL1_SW>,
	73	<&clks IMX6UL_CLK_PLL1_SYS>,
	74	<&clks IMX6UL_PLL1_BYPASS>,
	75	<&clks IMX6UL_CLK_PLL1>,
	76	<&clks IMX6UL_PLL1_BYPASS_SRC>,
	77	<&clks IMX6UL_CLK_OSC>;
	78	clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
	79	"secondary_sel", "step", "pll1_sw",
	80	"pll1_sys", "pll1_bypass", "pll1",
	81	"pll1_bypass_src", "osc";
	82	arm-supply = <&reg_arm>;
83	soc-supply = <&reg_soc>;
84	};
85	};
86
87	intc: interrupt-controller@00a01000 {
88	compatible = "arm,cortex-a7-gic";
89	#interrupt-cells = <3>;
90	interrupt-controller;
91	reg = <0x00a01000 0x1000>,
92	<0x00a02000 0x1000>,
93	<0x00a04000 0x2000>,
94	<0x00a06000 0x2000>;
95	};
96
97	ckil: clock-cli {
98	compatible = "fixed-clock";
99	#clock-cells = <0>;
100	clock-frequency = <32768>;
101	clock-output-names = "ckil";
102	};
103
104	osc: clock-osc {
105	compatible = "fixed-clock";
106	#clock-cells = <0>;
107	clock-frequency = <24000000>;
108	clock-output-names = "osc";
109	};
110
111	ipp_di0: clock-di0 {
112	compatible = "fixed-clock";
113	#clock-cells = <0>;
114	clock-frequency = <0>;
115	clock-output-names = "ipp_di0";
116	};
117
118	ipp_di1: clock-di1 {
119	compatible = "fixed-clock";
120	#clock-cells = <0>;
121	clock-frequency = <0>;
122	clock-output-names = "ipp_di1";
123	};
124
125	soc {
126	#address-cells = <1>;
127	#size-cells = <1>;
128	compatible = "simple-bus";
18619ff5	129	interrupt-parent = <&gpc>;
a5fcccbc FL	130	ranges;
	131
	132	pmu {
	133	compatible = "arm,cortex-a7-pmu";
	134	interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
	135	status = "disabled";
	136	};
	137
322d09d6 AH	138	ocram: sram@00900000 {
	139	compatible = "mmio-sram";
	140	reg = <0x00900000 0x20000>;
	141	};
	142
a5fcccbc FL	143	aips1: aips-bus@02000000 {
	144	compatible = "fsl,aips-bus", "simple-bus";
	145	#address-cells = <1>;
	146	#size-cells = <1>;
	147	reg = <0x02000000 0x100000>;
	148	ranges;
	149
	150	spba-bus@02000000 {
	151	compatible = "fsl,spba-bus", "simple-bus";
	152	#address-cells = <1>;
	153	#size-cells = <1>;
	154	reg = <0x02000000 0x40000>;
	155	ranges;
	156
	157	ecspi1: ecspi@02008000 {
	158	#address-cells = <1>;
	159	#size-cells = <0>;
	160	compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
	161	reg = <0x02008000 0x4000>;
	162	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
	163	clocks = <&clks IMX6UL_CLK_ECSPI1>,
	164	<&clks IMX6UL_CLK_ECSPI1>;
	165	clock-names = "ipg", "per";
	166	status = "disabled";
	167	};
	168
	169	ecspi2: ecspi@0200c000 {
	170	#address-cells = <1>;
	171	#size-cells = <0>;
	172	compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
	173	reg = <0x0200c000 0x4000>;
	174	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
	175	clocks = <&clks IMX6UL_CLK_ECSPI2>,
	176	<&clks IMX6UL_CLK_ECSPI2>;
	177	clock-names = "ipg", "per";
	178	status = "disabled";
	179	};
	180
	181	ecspi3: ecspi@02010000 {
	182	#address-cells = <1>;
	183	#size-cells = <0>;
	184	compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
	185	reg = <0x02010000 0x4000>;
	186	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
	187	clocks = <&clks IMX6UL_CLK_ECSPI3>,
	188	<&clks IMX6UL_CLK_ECSPI3>;
	189	clock-names = "ipg", "per";
	190	status = "disabled";
	191	};
	192
	193	ecspi4: ecspi@02014000 {
	194	#address-cells = <1>;
	195	#size-cells = <0>;
	196	compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
	197	reg = <0x02014000 0x4000>;
	198	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
	199	clocks = <&clks IMX6UL_CLK_ECSPI4>,
	200	<&clks IMX6UL_CLK_ECSPI4>;
	201	clock-names = "ipg", "per";
	202	status = "disabled";
	203	};
	204
	205	uart7: serial@02018000 {
	206	compatible = "fsl,imx6ul-uart",
207	"fsl,imx6q-uart";
208	reg = <0x02018000 0x4000>;
209	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
210	clocks = <&clks IMX6UL_CLK_UART7_IPG>,
211	<&clks IMX6UL_CLK_UART7_SERIAL>;
212	clock-names = "ipg", "per";
213	status = "disabled";
214	};
215
216	uart1: serial@02020000 {
217	compatible = "fsl,imx6ul-uart",
218	"fsl,imx6q-uart";
219	reg = <0x02020000 0x4000>;
220	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
221	clocks = <&clks IMX6UL_CLK_UART1_IPG>,
222	<&clks IMX6UL_CLK_UART1_SERIAL>;
223	clock-names = "ipg", "per";
224	status = "disabled";
225	};
226
227	uart8: serial@02024000 {
228	compatible = "fsl,imx6ul-uart",
229	"fsl,imx6q-uart";
230	reg = <0x02024000 0x4000>;
231	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
232	clocks = <&clks IMX6UL_CLK_UART8_IPG>,
233	<&clks IMX6UL_CLK_UART8_SERIAL>;
234	clock-names = "ipg", "per";
235	status = "disabled";
236	};
237	};
238
239	gpt1: gpt@02098000 {
240	compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
241	reg = <0x02098000 0x4000>;
242	interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
243	clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
244	<&clks IMX6UL_CLK_GPT1_SERIAL>;
245	clock-names = "ipg", "per";
246	};
247
248	gpio1: gpio@0209c000 {
249	compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
250	reg = <0x0209c000 0x4000>;
251	interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
252	<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
253	gpio-controller;
254	#gpio-cells = <2>;
255	interrupt-controller;
256	#interrupt-cells = <2>;
257	};
258
259	gpio2: gpio@020a0000 {
260	compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
261	reg = <0x020a0000 0x4000>;
262	interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
263	<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
264	gpio-controller;
265	#gpio-cells = <2>;
266	interrupt-controller;
267	#interrupt-cells = <2>;
268	};
269
270	gpio3: gpio@020a4000 {
271	compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
272	reg = <0x020a4000 0x4000>;
273	interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
274	<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
275	gpio-controller;
276	#gpio-cells = <2>;
277	interrupt-controller;
278	#interrupt-cells = <2>;
279	};
280
281	gpio4: gpio@020a8000 {
282	compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
283	reg = <0x020a8000 0x4000>;
284	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
285	<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
286	gpio-controller;
287	#gpio-cells = <2>;
288	interrupt-controller;
289	#interrupt-cells = <2>;
290	};
291
292	gpio5: gpio@020ac000 {
293	compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
294	reg = <0x020ac000 0x4000>;
295	interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
296	<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
297	gpio-controller;
298	#gpio-cells = <2>;
299	interrupt-controller;
300	#interrupt-cells = <2>;
301	};
302
01f3dc7d FD	303	fec2: ethernet@020b4000 {
	304	compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
	305	reg = <0x020b4000 0x4000>;
	306	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
	307	<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
	308	clocks = <&clks IMX6UL_CLK_ENET>,
	309	<&clks IMX6UL_CLK_ENET_AHB>,
	310	<&clks IMX6UL_CLK_ENET_PTP>,
	311	<&clks IMX6UL_CLK_ENET2_REF_125M>,
	312	<&clks IMX6UL_CLK_ENET2_REF_125M>;
	313	clock-names = "ipg", "ahb", "ptp",
	314	"enet_clk_ref", "enet_out";
	315	fsl,num-tx-queues=<1>;
	316	fsl,num-rx-queues=<1>;
	317	status = "disabled";
	318	};
	319
a5fcccbc FL	320	wdog1: wdog@020bc000 {
	321	compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
	322	reg = <0x020bc000 0x4000>;
	323	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
	324	clocks = <&clks IMX6UL_CLK_WDOG1>;
	325	};
	326
	327	wdog2: wdog@020c0000 {
	328	compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
	329	reg = <0x020c0000 0x4000>;
	330	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
	331	clocks = <&clks IMX6UL_CLK_WDOG2>;
	332	status = "disabled";
	333	};
	334
	335	clks: ccm@020c4000 {
	336	compatible = "fsl,imx6ul-ccm";
	337	reg = <0x020c4000 0x4000>;
	338	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
	339	<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
	340	#clock-cells = <1>;
	341	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
	342	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
	343	};
	344
	345	anatop: anatop@020c8000 {
	346	compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
	347	"syscon", "simple-bus";
	348	reg = <0x020c8000 0x1000>;
	349	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
	350	<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
	351	<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
	352
	353	reg_3p0: regulator-3p0@120 {
	354	compatible = "fsl,anatop-regulator";
	355	regulator-name = "vdd3p0";
	356	regulator-min-microvolt = <2625000>;
	357	regulator-max-microvolt = <3400000>;
	358	anatop-reg-offset = <0x120>;
	359	anatop-vol-bit-shift = <8>;
	360	anatop-vol-bit-width = <5>;
	361	anatop-min-bit-val = <0>;
	362	anatop-min-voltage = <2625000>;
	363	anatop-max-voltage = <3400000>;
	364	anatop-enable-bit = <0>;
	365	};
	366
	367	reg_arm: regulator-vddcore@140 {
	368	compatible = "fsl,anatop-regulator";
	369	regulator-name = "cpu";
	370	regulator-min-microvolt = <725000>;
	371	regulator-max-microvolt = <1450000>;
	372	regulator-always-on;
	373	anatop-reg-offset = <0x140>;
	374	anatop-vol-bit-shift = <0>;
	375	anatop-vol-bit-width = <5>;
	376	anatop-delay-reg-offset = <0x170>;
	377	anatop-delay-bit-shift = <24>;
	378	anatop-delay-bit-width = <2>;
	379	anatop-min-bit-val = <1>;
	380	anatop-min-voltage = <725000>;
	381	anatop-max-voltage = <1450000>;
	382	};
	383
384	reg_soc: regulator-vddsoc@140 {
385	compatible = "fsl,anatop-regulator";
386	regulator-name = "vddsoc";
387	regulator-min-microvolt = <725000>;
388	regulator-max-microvolt = <1450000>;
389	regulator-always-on;
390	anatop-reg-offset = <0x140>;
391	anatop-vol-bit-shift = <18>;
392	anatop-vol-bit-width = <5>;
393	anatop-delay-reg-offset = <0x170>;
394	anatop-delay-bit-shift = <28>;
395	anatop-delay-bit-width = <2>;
396	anatop-min-bit-val = <1>;
397	anatop-min-voltage = <725000>;
398	anatop-max-voltage = <1450000>;
399	};
400	};
401
402	usbphy1: usbphy@020c9000 {
403	compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
404	reg = <0x020c9000 0x1000>;
405	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
406	clocks = <&clks IMX6UL_CLK_USBPHY1>;
407	phy-3p0-supply = <&reg_3p0>;
408	fsl,anatop = <&anatop>;
409	};
410
411	usbphy2: usbphy@020ca000 {
412	compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
413	reg = <0x020ca000 0x1000>;
414	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
415	clocks = <&clks IMX6UL_CLK_USBPHY2>;
416	phy-3p0-supply = <&reg_3p0>;
417	fsl,anatop = <&anatop>;
418	};
419
5b032872 AH	420	snvs: snvs@020cc000 {
	421	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
	422	reg = <0x020cc000 0x4000>;
	423
	424	snvs_rtc: snvs-rtc-lp {
	425	compatible = "fsl,sec-v4.0-mon-rtc-lp";
	426	regmap = <&snvs>;
	427	offset = <0x34>;
	428	interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
	429	<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
	430	};
36032575	431
ab0a05d8 AH	432	snvs_poweroff: snvs-poweroff {
	433	compatible = "syscon-poweroff";
	434	regmap = <&snvs>;
	435	offset = <0x38>;
	436	mask = <0x60>;
	437	status = "disabled";
	438	};
	439
36032575 AH	440	snvs_pwrkey: snvs-powerkey {
	441	compatible = "fsl,sec-v4.0-pwrkey";
	442	regmap = <&snvs>;
	443	interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
	444	linux,keycode = <KEY_POWER>;
	445	wakeup-source;
	446	};
5b032872 AH	447	};
5b032872 AH	448
a5fcccbc FL	449	epit1: epit@020d0000 {
	450	reg = <0x020d0000 0x4000>;
	451	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
	452	};
	453
	454	epit2: epit@020d4000 {
	455	reg = <0x020d4000 0x4000>;
	456	interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
	457	};
	458
	459	src: src@020d8000 {
	460	compatible = "fsl,imx6ul-src", "fsl,imx51-src";
	461	reg = <0x020d8000 0x4000>;
	462	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
	463	<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
	464	#reset-cells = <1>;
	465	};
	466
	467	gpc: gpc@020dc000 {
	468	compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
	469	reg = <0x020dc000 0x4000>;
18619ff5 AH	470	interrupt-controller;
18619ff5 AH	471	#interrupt-cells = <3>;
a5fcccbc	472	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
18619ff5	473	interrupt-parent = <&intc>;
a5fcccbc FL	474	};
	475
	476	iomuxc: iomuxc@020e0000 {
	477	compatible = "fsl,imx6ul-iomuxc";
	478	reg = <0x020e0000 0x4000>;
	479	};
	480
	481	gpr: iomuxc-gpr@020e4000 {
	482	compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
	483	reg = <0x020e4000 0x4000>;
	484	};
	485
	486	gpt2: gpt@020e8000 {
	487	compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
	488	reg = <0x020e8000 0x4000>;
	489	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
	490	clocks = <&clks IMX6UL_CLK_DUMMY>,
	491	<&clks IMX6UL_CLK_DUMMY>;
	492	clock-names = "ipg", "per";
	493	};
	494
	495	pwm5: pwm@020f0000 {
	496	compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
	497	reg = <0x020f0000 0x4000>;
	498	interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
	499	clocks = <&clks IMX6UL_CLK_DUMMY>,
	500	<&clks IMX6UL_CLK_DUMMY>;
	501	clock-names = "ipg", "per";
	502	#pwm-cells = <2>;
	503	};
	504
	505	pwm6: pwm@020f4000 {
	506	compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
	507	reg = <0x020f4000 0x4000>;
	508	interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
	509	clocks = <&clks IMX6UL_CLK_DUMMY>,
	510	<&clks IMX6UL_CLK_DUMMY>;
	511	clock-names = "ipg", "per";
	512	#pwm-cells = <2>;
	513	};
	514
	515	pwm7: pwm@020f8000 {
	516	compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
	517	reg = <0x020f8000 0x4000>;
	518	interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
	519	clocks = <&clks IMX6UL_CLK_DUMMY>,
	520	<&clks IMX6UL_CLK_DUMMY>;
	521	clock-names = "ipg", "per";
	522	#pwm-cells = <2>;
	523	};
	524
	525	pwm8: pwm@020fc000 {
	526	compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
	527	reg = <0x020fc000 0x4000>;
	528	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
	529	clocks = <&clks IMX6UL_CLK_DUMMY>,
	530	<&clks IMX6UL_CLK_DUMMY>;
	531	clock-names = "ipg", "per";
	532	#pwm-cells = <2>;
	533	};
	534	};
	535
	536	aips2: aips-bus@02100000 {
	537	compatible = "fsl,aips-bus", "simple-bus";
538	#address-cells = <1>;
539	#size-cells = <1>;
540	reg = <0x02100000 0x100000>;
541	ranges;
542
cad2cb69 FL	543	usbotg1: usb@02184000 {
	544	compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
	545	reg = <0x02184000 0x200>;
	546	interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
	547	clocks = <&clks IMX6UL_CLK_USBOH3>;
	548	fsl,usbphy = <&usbphy1>;
	549	fsl,usbmisc = <&usbmisc 0>;
	550	fsl,anatop = <&anatop>;
9493bf54	551	ahb-burst-config = <0x0>;
2b1a40e8 PC	552	tx-burst-size-dword = <0x10>;
2b1a40e8 PC	553	rx-burst-size-dword = <0x10>;
cad2cb69 FL	554	status = "disabled";
	555	};
	556
	557	usbotg2: usb@02184200 {
	558	compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
	559	reg = <0x02184200 0x200>;
	560	interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
	561	clocks = <&clks IMX6UL_CLK_USBOH3>;
	562	fsl,usbphy = <&usbphy2>;
	563	fsl,usbmisc = <&usbmisc 1>;
9493bf54	564	ahb-burst-config = <0x0>;
2b1a40e8 PC	565	tx-burst-size-dword = <0x10>;
2b1a40e8 PC	566	rx-burst-size-dword = <0x10>;
cad2cb69 FL	567	status = "disabled";
	568	};
	569
	570	usbmisc: usbmisc@02184800 {
	571	#index-cells = <1>;
	572	compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
	573	reg = <0x02184800 0x200>;
	574	};
	575
01f3dc7d FD	576	fec1: ethernet@02188000 {
	577	compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
	578	reg = <0x02188000 0x4000>;
	579	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
	580	<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
	581	clocks = <&clks IMX6UL_CLK_ENET>,
	582	<&clks IMX6UL_CLK_ENET_AHB>,
	583	<&clks IMX6UL_CLK_ENET_PTP>,
	584	<&clks IMX6UL_CLK_ENET_REF>,
	585	<&clks IMX6UL_CLK_ENET_REF>;
	586	clock-names = "ipg", "ahb", "ptp",
	587	"enet_clk_ref", "enet_out";
	588	fsl,num-tx-queues=<1>;
	589	fsl,num-rx-queues=<1>;
	590	status = "disabled";
	591	};
	592
3add0969 HC	593	tsc: tsc@02040000 {
	594	compatible = "fsl,imx6ul-tsc";
	595	reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
	596	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
	597	<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
	598	clocks = <&clks IMX6UL_CLK_IPG>,
	599	<&clks IMX6UL_CLK_ADC2>;
	600	clock-names = "tsc", "adc";
	601	status = "disabled";
	602	};
	603
a5fcccbc FL	604	usdhc1: usdhc@02190000 {
	605	compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
	606	reg = <0x02190000 0x4000>;
	607	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
	608	clocks = <&clks IMX6UL_CLK_USDHC1>,
	609	<&clks IMX6UL_CLK_USDHC1>,
	610	<&clks IMX6UL_CLK_USDHC1>;
	611	clock-names = "ipg", "ahb", "per";
	612	bus-width = <4>;
	613	status = "disabled";
	614	};
	615
	616	usdhc2: usdhc@02194000 {
	617	compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
	618	reg = <0x02194000 0x4000>;
	619	interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
	620	clocks = <&clks IMX6UL_CLK_USDHC2>,
	621	<&clks IMX6UL_CLK_USDHC2>,
	622	<&clks IMX6UL_CLK_USDHC2>;
	623	clock-names = "ipg", "ahb", "per";
	624	bus-width = <4>;
	625	status = "disabled";
	626	};
	627
aab8ec0c FE	628	adc1: adc@02198000 {
	629	compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
	630	reg = <0x02198000 0x4000>;
	631	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
	632	clocks = <&clks IMX6UL_CLK_ADC1>;
	633	num-channels = <2>;
	634	clock-names = "adc";
	635	fsl,adck-max-frequency = <30000000>, <40000000>,
	636	<20000000>;
	637	status = "disabled";
	638	};
	639
a5fcccbc FL	640	i2c1: i2c@021a0000 {
	641	#address-cells = <1>;
	642	#size-cells = <0>;
	643	compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
	644	reg = <0x021a0000 0x4000>;
	645	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
	646	clocks = <&clks IMX6UL_CLK_I2C1>;
	647	status = "disabled";
	648	};
	649
	650	i2c2: i2c@021a4000 {
	651	#address-cells = <1>;
	652	#size-cells = <0>;
	653	compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
	654	reg = <0x021a4000 0x4000>;
	655	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
	656	clocks = <&clks IMX6UL_CLK_I2C2>;
	657	status = "disabled";
	658	};
	659
	660	i2c3: i2c@021a8000 {
	661	#address-cells = <1>;
	662	#size-cells = <0>;
	663	compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
	664	reg = <0x021a8000 0x4000>;
	665	interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
	666	clocks = <&clks IMX6UL_CLK_I2C3>;
	667	status = "disabled";
	668	};
	669
51a37443 AH	670	mmdc: mmdc@021b0000 {
	671	compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
	672	reg = <0x021b0000 0x4000>;
	673	};
	674
5ff807a5 FL	675	qspi: qspi@021e0000 {
	676	#address-cells = <1>;
	677	#size-cells = <0>;
	678	compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
	679	reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
	680	reg-names = "QuadSPI", "QuadSPI-memory";
	681	interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
	682	clocks = <&clks IMX6UL_CLK_QSPI>,
	683	<&clks IMX6UL_CLK_QSPI>;
	684	clock-names = "qspi_en", "qspi";
	685	status = "disabled";
	686	};
	687
a5fcccbc FL	688	uart2: serial@021e8000 {
	689	compatible = "fsl,imx6ul-uart",
	690	"fsl,imx6q-uart";
	691	reg = <0x021e8000 0x4000>;
	692	interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
	693	clocks = <&clks IMX6UL_CLK_UART2_IPG>,
	694	<&clks IMX6UL_CLK_UART2_SERIAL>;
	695	clock-names = "ipg", "per";
	696	status = "disabled";
	697	};
	698
	699	uart3: serial@021ec000 {
	700	compatible = "fsl,imx6ul-uart",
	701	"fsl,imx6q-uart";
	702	reg = <0x021ec000 0x4000>;
	703	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
	704	clocks = <&clks IMX6UL_CLK_UART3_IPG>,
	705	<&clks IMX6UL_CLK_UART3_SERIAL>;
	706	clock-names = "ipg", "per";
	707	status = "disabled";
	708	};
	709
	710	uart4: serial@021f0000 {
	711	compatible = "fsl,imx6ul-uart",
	712	"fsl,imx6q-uart";
	713	reg = <0x021f0000 0x4000>;
	714	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
	715	clocks = <&clks IMX6UL_CLK_UART4_IPG>,
	716	<&clks IMX6UL_CLK_UART4_SERIAL>;
	717	clock-names = "ipg", "per";
	718	status = "disabled";
	719	};
	720
	721	uart5: serial@021f4000 {
	722	compatible = "fsl,imx6ul-uart",
	723	"fsl,imx6q-uart";
	724	reg = <0x021f4000 0x4000>;
	725	interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
	726	clocks = <&clks IMX6UL_CLK_UART5_IPG>,
	727	<&clks IMX6UL_CLK_UART5_SERIAL>;
	728	clock-names = "ipg", "per";
	729	status = "disabled";
	730	};
	731
	732	i2c4: i2c@021f8000 {
	733	#address-cells = <1>;
	734	#size-cells = <0>;
	735	compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
	736	reg = <0x021f8000 0x4000>;
	737	interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
	738	clocks = <&clks IMX6UL_CLK_I2C4>;
	739	status = "disabled";
	740	};
	741
	742	uart6: serial@021fc000 {
	743	compatible = "fsl,imx6ul-uart",
	744	"fsl,imx6q-uart";
	745	reg = <0x021fc000 0x4000>;
	746	interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
	747	clocks = <&clks IMX6UL_CLK_UART6_IPG>,
	748	<&clks IMX6UL_CLK_UART6_SERIAL>;
	749	clock-names = "ipg", "per";
	750	status = "disabled";
	751	};
752	};
753	};
754	};