projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| e38cd3ae MH |
1 | / { |
| 2 | mbus { | |
| 7b36efd0 | 3 | pciec: pcie-controller { |
| e38cd3ae MH |
4 | compatible = "marvell,kirkwood-pcie"; |
| 5 | status = "disabled"; | |
| 6 | device_type = "pci"; | |
| 7 | ||
| 8 | #address-cells = <3>; | |
| 9 | #size-cells = <2>; | |
| 10 | ||
| 11 | bus-range = <0x00 0xff>; | |
| 12 | ||
| 13 | ranges = | |
| 14 | <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 | |
| 15 | 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ | |
| 16 | 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; | |
| 17 | ||
| 7b36efd0 | 18 | pcie0: pcie@1,0 { |
| e38cd3ae MH |
19 | device_type = "pci"; |
| 20 | assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; | |
| 21 | reg = <0x0800 0 0 0 0>; | |
| 22 | #address-cells = <3>; | |
| 23 | #size-cells = <2>; | |
| 24 | #interrupt-cells = <1>; | |
| 25 | ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 | |
| 26 | 0x81000000 0 0 0x81000000 0x1 0 1 0>; | |
| 27 | interrupt-map-mask = <0 0 0 0>; | |
| 28 | interrupt-map = <0 0 0 0 &intc 9>; | |
| 29 | marvell,pcie-port = <0>; | |
| 30 | marvell,pcie-lane = <0>; | |
| 31 | clocks = <&gate_clk 2>; | |
| 32 | status = "disabled"; | |
| 33 | }; | |
| 34 | }; | |
| 35 | }; | |
| 36 | ||
| 37 | ocp@f1000000 { | |
| a9483969 | 38 | pinctrl: pin-controller@10000 { |
| e38cd3ae | 39 | compatible = "marvell,88f6192-pinctrl"; |
| e38cd3ae | 40 | |
| e38cd3ae MH |
41 | pmx_sata0: pmx-sata0 { |
| 42 | marvell,pins = "mpp5", "mpp21", "mpp23"; | |
| 43 | marvell,function = "sata0"; | |
| 44 | }; | |
| 45 | pmx_sata1: pmx-sata1 { | |
| 46 | marvell,pins = "mpp4", "mpp20", "mpp22"; | |
| 47 | marvell,function = "sata1"; | |
| 48 | }; | |
| e38cd3ae MH |
49 | pmx_sdio: pmx-sdio { |
| 50 | marvell,pins = "mpp12", "mpp13", "mpp14", | |
| 51 | "mpp15", "mpp16", "mpp17"; | |
| 52 | marvell,function = "sdio"; | |
| 53 | }; | |
| 54 | }; | |
| 55 | ||
| 7b36efd0 | 56 | rtc: rtc@10300 { |
| e38cd3ae MH |
57 | compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; |
| 58 | reg = <0x10300 0x20>; | |
| 59 | interrupts = <53>; | |
| 60 | clocks = <&gate_clk 7>; | |
| 61 | }; | |
| 62 | ||
| 7b36efd0 | 63 | sata: sata@80000 { |
| e38cd3ae MH |
64 | compatible = "marvell,orion-sata"; |
| 65 | reg = <0x80000 0x5000>; | |
| 66 | interrupts = <21>; | |
| 67 | clocks = <&gate_clk 14>, <&gate_clk 15>; | |
| 68 | clock-names = "0", "1"; | |
| 9c569b39 ED |
69 | phys = <&sata_phy0>, <&sata_phy1>; |
| 70 | phy-names = "port0", "port1"; | |
| e38cd3ae MH |
71 | status = "disabled"; |
| 72 | }; | |
| 73 | ||
| 7b36efd0 | 74 | sdio: mvsdio@90000 { |
| e38cd3ae MH |
75 | compatible = "marvell,orion-sdio"; |
| 76 | reg = <0x90000 0x200>; | |
| 77 | interrupts = <28>; | |
| 78 | clocks = <&gate_clk 4>; | |
| 79 | bus-width = <4>; | |
| 80 | cap-sdio-irq; | |
| 81 | cap-sd-highspeed; | |
| 82 | cap-mmc-highspeed; | |
| 83 | status = "disabled"; | |
| 84 | }; | |
| 85 | }; | |
| 86 | }; |