projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 82bb2da1 | 1 | / { |
| 54397d85 EG |
2 | mbus { |
| 3 | pcie-controller { | |
| 4 | compatible = "marvell,kirkwood-pcie"; | |
| 5 | status = "disabled"; | |
| 6 | device_type = "pci"; | |
| 7 | ||
| 8 | #address-cells = <3>; | |
| 9 | #size-cells = <2>; | |
| 10 | ||
| 11 | bus-range = <0x00 0xff>; | |
| 12 | ||
| 13 | ranges = | |
| 14 | <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 | |
| 15 | 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ | |
| 16 | 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; | |
| 17 | ||
| 18 | pcie@1,0 { | |
| 19 | device_type = "pci"; | |
| 20 | assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; | |
| 21 | reg = <0x0800 0 0 0 0>; | |
| 22 | #address-cells = <3>; | |
| 23 | #size-cells = <2>; | |
| 24 | #interrupt-cells = <1>; | |
| 25 | ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 | |
| 26 | 0x81000000 0 0 0x81000000 0x1 0 1 0>; | |
| 27 | interrupt-map-mask = <0 0 0 0>; | |
| 28 | interrupt-map = <0 0 0 0 &intc 9>; | |
| 29 | marvell,pcie-port = <0>; | |
| 30 | marvell,pcie-lane = <0>; | |
| 31 | clocks = <&gate_clk 2>; | |
| 32 | status = "disabled"; | |
| 33 | }; | |
| 34 | }; | |
| 35 | }; | |
| 36 | ||
| 82bb2da1 AL |
37 | ocp@f1000000 { |
| 38 | pinctrl: pinctrl@10000 { | |
| 39 | compatible = "marvell,88f6281-pinctrl"; | |
| 40 | reg = <0x10000 0x20>; | |
| 41 | ||
| 42 | pmx_nand: pmx-nand { | |
| 43 | marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", | |
| 44 | "mpp4", "mpp5", "mpp18", | |
| 45 | "mpp19"; | |
| 46 | marvell,function = "nand"; | |
| 47 | }; | |
| 48 | pmx_sata0: pmx-sata0 { | |
| 49 | marvell,pins = "mpp5", "mpp21", "mpp23"; | |
| 50 | marvell,function = "sata0"; | |
| 51 | }; | |
| 52 | pmx_sata1: pmx-sata1 { | |
| 53 | marvell,pins = "mpp4", "mpp20", "mpp22"; | |
| 54 | marvell,function = "sata1"; | |
| 55 | }; | |
| 56 | pmx_spi: pmx-spi { | |
| 57 | marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; | |
| 58 | marvell,function = "spi"; | |
| 59 | }; | |
| 60 | pmx_twsi0: pmx-twsi0 { | |
| 61 | marvell,pins = "mpp8", "mpp9"; | |
| 62 | marvell,function = "twsi0"; | |
| 63 | }; | |
| 64 | pmx_uart0: pmx-uart0 { | |
| 65 | marvell,pins = "mpp10", "mpp11"; | |
| 66 | marvell,function = "uart0"; | |
| 67 | }; | |
| 68 | pmx_uart1: pmx-uart1 { | |
| 69 | marvell,pins = "mpp13", "mpp14"; | |
| 70 | marvell,function = "uart1"; | |
| 71 | }; | |
| de64ee5e SP |
72 | pmx_sdio: pmx-sdio { |
| 73 | marvell,pins = "mpp12", "mpp13", "mpp14", | |
| 74 | "mpp15", "mpp16", "mpp17"; | |
| 75 | marvell,function = "sdio"; | |
| 76 | }; | |
| 82bb2da1 | 77 | }; |
| 670ee03c | 78 | |
| df6bf2e9 VL |
79 | rtc@10300 { |
| 80 | compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; | |
| 81 | reg = <0x10300 0x20>; | |
| 82 | interrupts = <53>; | |
| 83 | clocks = <&gate_clk 7>; | |
| 84 | }; | |
| 85 | ||
| 86 | sata@80000 { | |
| 87 | compatible = "marvell,orion-sata"; | |
| 88 | reg = <0x80000 0x5000>; | |
| 89 | interrupts = <21>; | |
| 90 | clocks = <&gate_clk 14>, <&gate_clk 15>; | |
| 91 | clock-names = "0", "1"; | |
| 92 | status = "disabled"; | |
| 93 | }; | |
| 94 | ||
| 95 | mvsdio@90000 { | |
| 96 | compatible = "marvell,orion-sdio"; | |
| 97 | reg = <0x90000 0x200>; | |
| 98 | interrupts = <28>; | |
| 99 | clocks = <&gate_clk 4>; | |
| 0242399e SH |
100 | pinctrl-0 = <&pmx_sdio>; |
| 101 | pinctrl-names = "default"; | |
| df6bf2e9 VL |
102 | bus-width = <4>; |
| 103 | cap-sdio-irq; | |
| 104 | cap-sd-highspeed; | |
| 105 | cap-mmc-highspeed; | |
| 106 | status = "disabled"; | |
| 107 | }; | |
| 82bb2da1 | 108 | }; |
| de64ee5e | 109 | }; |