Commit | Line | Data |
---|---|---|
2f865c35 SH |
1 | /dts-v1/; |
2 | ||
3 | /include/ "kirkwood.dtsi" | |
1bf370a8 | 4 | /include/ "kirkwood-6281.dtsi" |
2f865c35 SH |
5 | |
6 | / { | |
7 | model = "Seagate FreeAgent Dockstar"; | |
8 | compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; | |
9 | ||
10 | memory { | |
11 | device_type = "memory"; | |
12 | reg = <0x00000000 0x8000000>; | |
13 | }; | |
14 | ||
15 | chosen { | |
16 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; | |
17 | }; | |
18 | ||
19 | ocp@f1000000 { | |
1bf370a8 AL |
20 | pinctrl: pinctrl@10000 { |
21 | ||
22 | pinctrl-0 = < &pmx_usb_power_enable | |
23 | &pmx_led_green &pmx_led_orange >; | |
24 | pinctrl-names = "default"; | |
25 | ||
26 | pmx_usb_power_enable: pmx-usb-power-enable { | |
27 | marvell,pins = "mpp29"; | |
28 | marvell,function = "gpio"; | |
29 | }; | |
30 | pmx_led_green: pmx-led-green { | |
31 | marvell,pins = "mpp46"; | |
32 | marvell,function = "gpio"; | |
33 | }; | |
34 | pmx_led_orange: pmx-led-orange { | |
35 | marvell,pins = "mpp47"; | |
36 | marvell,function = "gpio"; | |
37 | }; | |
38 | }; | |
2f865c35 | 39 | serial@12000 { |
2f865c35 SH |
40 | status = "ok"; |
41 | }; | |
42 | ||
43 | nand@3000000 { | |
44 | status = "okay"; | |
45 | ||
46 | partition@0 { | |
47 | label = "u-boot"; | |
48 | reg = <0x0000000 0x100000>; | |
49 | read-only; | |
50 | }; | |
51 | ||
52 | partition@100000 { | |
53 | label = "uImage"; | |
54 | reg = <0x0100000 0x400000>; | |
55 | }; | |
56 | ||
57 | partition@500000 { | |
58 | label = "data"; | |
59 | reg = <0x0500000 0xfb00000>; | |
60 | }; | |
61 | }; | |
62 | }; | |
63 | gpio-leds { | |
64 | compatible = "gpio-leds"; | |
65 | ||
66 | health { | |
67 | label = "status:green:health"; | |
68 | gpios = <&gpio1 14 1>; | |
69 | linux,default-trigger = "default-on"; | |
70 | }; | |
71 | fault { | |
72 | label = "status:orange:fault"; | |
73 | gpios = <&gpio1 15 1>; | |
74 | }; | |
75 | }; | |
c3ff813a AL |
76 | regulators { |
77 | compatible = "simple-bus"; | |
78 | #address-cells = <1>; | |
79 | #size-cells = <0>; | |
80 | ||
81 | usb_power: regulator@1 { | |
82 | compatible = "regulator-fixed"; | |
83 | reg = <1>; | |
84 | regulator-name = "USB Power"; | |
85 | regulator-min-microvolt = <5000000>; | |
86 | regulator-max-microvolt = <5000000>; | |
87 | enable-active-high; | |
88 | regulator-always-on; | |
89 | regulator-boot-on; | |
90 | gpio = <&gpio0 29 0>; | |
91 | }; | |
92 | }; | |
2f865c35 | 93 | }; |